Hi,
I have latest 4.1 installed and i see that HA score on hosts keeps
going to 0 and comes back to 3400. This behavior is something which i
am observing with 4.1 and i see that it takes considerable amount of
time to get back to normal state. Any reason why it takes such a long time?
On Thu, 29 Dec 2016 15:32:07 -0500 Derek wrote:
DA> Hi,
DA>
DA> What is the current status of Ovirt 4.0.6 and EL7.3? From previous
DA> threads it seemed to me that there was a potential compatibility issue
DA> with the 7.3 kernel and an updated version of vdsm or qemu? I just want
DA> to ensure
Even better, if the value is not hardcoded then the configured value is
used. Might be that I'm missunderstanding something but this is the
behaviour I expected instead of that it is using br-int.
Attached is a patch which properly sets up the xml, in case there is
already a virtual port
Ok so I tried destroying the storage domain. The system then tried to import
it automatically again but it failed with the following event logged in the
Manager Events Log
Failed to attach Storage Domain hosted_storage to Data Center DOH. (User:
SYSTEM)
I tried this twice and same thing each
Hi all,
The repo files for ovirt-4.0 seem to have overlapping packages from (el7 vs
centos.el7 naming).
resources.ovirt.org: ovirt-4.0
and
mirror.centos.org/centos/7/virt/x86_64/ovirt-4.0/: centos-ovirt40-release
for example
vdsm-4.18.15.3-1.el7.centos.x86_64.rpm
vs
Destroying it was going to be my next move, just wanted to make sure that was
the best option. Yes I can mount the gluster volume “engine” directly on one
of the hosts without issue. The engine is obviously accessing it ok or at
least enough that it can run as a VM image located on it.
I
When I change
/usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook to
instead of hardcoded to br-int use BRIDGE_NAME = 'ovirtbridge' then I
get the expected behaviour and I get a working network connectivity in
my VM with IP provided by dhcp.
/Sverker
Den 2016-12-29 kl.
By default the vNic profile of my OVN bridge ovirtbridge gets a Network
filter named vdsm-no-mac-spoofing. If I instead set No filter then I
don't get those ebtables / iptables messages. It seems that there is
some issue between ovirt/vdsm and firewalld, which we can put to the
side for now.
Hi,
What is the current status of Ovirt 4.0.6 and EL7.3? From previous
threads it seemed to me that there was a potential compatibility issue
with the 7.3 kernel and an updated version of vdsm or qemu? I just want
to ensure any potential issues have been cleared up before I upgrade my
systems.
After a reboot I ran into a new problem, vdsm-network did not want to
start. First because of that it tried to establish default route on the
dummy interface:
Dec 29 20:57:44 h2.limetransit.com vdsm-tool[23132]: Traceback (most
recent call last):
Dec 29 20:57:44 h2.limetransit.com
On Wed, 28 Dec 2016 09:39:16 +0200 Yaniv wrote:
YK> On Dec 27, 2016 10:09 PM, "Robert Story" wrote:
YK> >Just as a counterpoint, I had 2 issues, but both were related to changes
YK> >I'd made..
YK> >
YK> >- I have ipv6 disabled. with CentOS 7.3 this can cause rpcbind to choke,
The specific command most likely fails because there is no chain named
libvirt-J-vnet0, but when should that have been created?
/Sverker
Vidarebefordrat meddelande
Ämne: Re: [ovirt-users] Issue with OVN/OVS and mandatory ovirtmgmt network
Datum: Thu, 29 Dec 2016 08:06:29
Let me add the OVN team.
Lance, Numan,
Can you please look at this?
Trying to plug a vNIC results in:
> >> Dec 28 23:31:35 h2 ovs-vsctl: ovs|1|vsctl|INFO|Called as ovs-vsctl
> >> --timeout=5 -- --if-exists del-port vnet0 -- add-port br-int vnet0 --
> >> set Interface vnet0
Hi
Same problem still..
/Sverker
Den 2016-12-29 kl. 13:34, skrev Marcin Mirecki:
Hi,
The tunnels are created to connect multiple OVN controllers.
If there is only one, there is no need for the tunnels, so none
will be created, this is the correct behavior.
Does the problem still occur after
Hi,
The tunnels are created to connect multiple OVN controllers.
If there is only one, there is no need for the tunnels, so none
will be created, this is the correct behavior.
Does the problem still occur after setting configuring the OVN-controller?
Marcin
- Original Message -
>
Hi
The rpm packages you listed in the other mail are installed but I had
not run vdsm-tool ovn-config to create tunnel as the OVN controller is
on the same host.
[root@h2 ~]# rpm -q openvswitch-ovn-common
openvswitch-ovn-common-2.6.90-1.el7.centos.x86_64
[root@h2 ~]# rpm -q
It seems that the import of the storage domain failed since it was
inaccessible:
2016-12-28 07:06:25,406 ERROR
[org.ovirt.engine.core.bll.storage.domain.GetExistingStorageDomainListQuery]
(org.ovirt.thread.pool-6-thread-46) [] Exception:
org.ovirt.engine.core.common.errors.EngineException:
Hi,
Can you please do: "sudo ovsdb-client dump"
on the host and send me the output?
Have you configured the ovn controller to connect to the
OVN north? You can do it using "vdsm-tool ovn-config" or
using the OVN tools directly.
Please check out:
Hi,
br-int is the OVN integration bridge, it should have been created
when installing OVN. I assume you have the following packages installed
on the host:
openvswitch-ovn-common
openvswitch-ovn-host
python-openvswitch
Please give me some time to look at the connectivity problem.
19 matches
Mail list logo