On Tue, Feb 7, 2017 at 1:22 AM, Edward Clay wrote:
> Looks like I originally had a newer version of the debuginfo packages
> installed that didn't work. So the log output I provided did lead to the
> answer I needed. Evidently yum install ovirt-engine*debuginfo seems
Hey Sergey -
If you check "lvs" and ensure that there's not actually a new LV from the
update, you can cleanly 'rpm -e ovirt-node-ng-image-update', and be ok
without redeploying.
Unfortunately, it's hard to tell from the logs (and '--justdb' hanging)
what's happening here, but I'll try to
Hi,
Last evening on my new environment, I installed oVirt engine 4.1 and two
nodes (Dell R 710) with Node ng 4.1. Post installation, node updates
also completed successfully. I created a new VM and installed with
Ubuntu Precise Pangolin LTS OS and OS installation also completed
successfully.
Looks like I originally had a newer version of the debuginfo packages
installed that didn't work. So the log output I provided did lead to the
answer I needed. Evidently yum install ovirt-engine*debuginfo seems to
install the latest version available instead of the one that matches the
currently
Hi,
we know about this and we already pushed patches that should resolve
this issue in 4.1.1 (one was merged today in fact).
We track the issue here:
https://bugzilla.redhat.com/show_bug.cgi?id=1364132 and the patch that
should resolve it is here: https://gerrit.ovirt.org/#/c/71472/
Applying
Hello, I've run into a situation where I'm getting an uncaught exception
error and it seems like the log entries are obfuscated and one needs to
install the ovirt-engine-weba-portal-debuginfo rpm to decipher whats really
going on. I've installed this package and restarted the ovirt-engine but
I've been running oVirt 4.0.x for a while now and upgraded the engine and hosts
to 4.1. Sometimes, on both 4.0 and 4.1, trying to run the "hosted-engine
-console" command gives the following results:
The engine VM is running on this host
Connected to domain HostedEngine
Escape character is ^]
Adding Douglas and Ryan
Il 06/Feb/2017 13:32, "Sergey Kulikov" ha scritto:
>
> 1) I've updated from 4.0.6 to 4.1.0 (on Feb 01 node-ng was at version
> 4.1.0-0)
> After some time engine alerted, that this node have updates to
> ovirt-node-ng-image-4.1.0-1,
> but update from engine
On Feb 6, 2017 8:16 PM, "Maton, Brett" wrote:
Hi Arman,
I've got 10Gb (intel) nics in my servers and they are detected by ovirt.
In the network interfaces panel I see the speed listed as '1'...
Perhaps Arman refers to the vNics. Since they are virtual, we
Reboot complete.
If you are reading this, it means that all
went smooth and lists are operational again.
Sorry for the inconvenience if any.
Regards,
Evgheni Dereveanchin
- Original Message -
From: "Evgheni Dereveanchin"
To: "infra"
Cc:
Hi Arman,
I've got 10Gb (intel) nics in my servers and they are detected by ovirt.
In the network interfaces panel I see the speed listed as '1'...
Does you OS detect the nic speed properly ?
Regards,
Brett
On 6 February 2017 at 18:05, Arman Khalatyan wrote:
> Hi,
Hi everyone,
In a couple of minutes I will reboot the server
hosting all of our mailing lists (including this one)
to install software updates. It should come up quickly,
but if you have any problems sending to oVirt lists
please try again after a few minutes.
I will announce you as soon as
Hi,
Are there way to add some 10Gbit Interfaces in ovirt 4.1?
thanks,
Arman.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Ok, thanks Pavel. I’ll file a bug report with the logs and report back once
done.
From: Pavel Gashev [mailto:p...@acronis.com]
Sent: 06 February 2017 17:11
To: Mark Greenall ; users@ovirt.org
Subject: Re: [ovirt-users] Ovirt 4.0.6 guests 'Not Responding'
Mark,
In
Mark,
In your case all 30 workers were busy by vdsm.virt.sampling.HostMonitor
discarded by timeout, and there were 3000 tasks in the queue.
I encountered the problem. In my case ISO domain was not responding.
The issue is that vdsm executor doesn’t remove discarded workers. This is a bug.
>> A serious issue could instead happen with HA VMs:
>> if the engine finds earlier an HA VM as running on a different host it
>> will simply update its record, the issue is if it finds earlier the VM a not
>> on the original host since it will try to restart it causing a split brain
>> and
On 6 February 2017 at 13:30, Simone Tiraboschi wrote:
>
>
>1. What problems can I expect to have with VMs added/modified
>since the last backup?
>
> Modified VMs will be reverted to the previous configuration;
>>> additional VMs should be seen as
On Mon, Feb 6, 2017 at 1:52 PM, Doug Ingham wrote:
> Hi All, Simone,
>
> On 24 January 2017 at 10:11, Simone Tiraboschi
> wrote:
>
>>
>>
>> On Tue, Jan 24, 2017 at 1:49 PM, Doug Ingham wrote:
>>
>>> Hey guys,
>>> Just giving this a bump
Hi Pavel,
Thanks for responding. I bounced the VDSMD service, the guests recovered and
the monitor and queue full messages also cleared. However, we did keep getting
intermittent “Guest x Not Responding “ messages being communicated by the
Hosted Engine, in most cases the guests would actually
Hi all,
We can close this issue, it was because of collectd version and
collectd* dependencies.
Those packets were provided by two sources : epel-release in 4.1.1
version (was manually installed) and by the regular ovirt repo
(centos-opstools-testing) in 4.0.2 version.
Resinstalling vdsm
Hello everybody,
We are using oVirt Engine Version: 4.0.6.3-1.el7.centos on centos 7.3
with gluster replica 3 arbiter = (1+1)+1
I'm confused with GUI delaying - if node details are wanted ( cluster
-> nodes -> node detail = click on node raw ) then request generate over
10 min delay to
1) I've updated from 4.0.6 to 4.1.0 (on Feb 01 node-ng was at version 4.1.0-0)
After some time engine alerted, that this node have updates to
ovirt-node-ng-image-4.1.0-1,
but update from engine timed out, there were hanging processes in ps on this
node:
root 36309 0.0 0.0 113120 1564 ?
On Mon, Feb 6, 2017 at 12:42 PM, Ralf Schenk wrote:
> Hello,
>
> I set the host to maintenance mode and tried to undeploy engine via GUI.
> The action in GUI doesn't show an error but afterwards it still shows only
> "Undeploy" on hosted-engine tab od the host.
>
> Even removing
Hi Sandro,
I upgraded my 2 host setup + engine (engine is currently on separate
hardware, but I plan to make it self-hosted), and it went like
clockwork. My engine + hosts were running 4.0.5 and 7.2, so after
installing 4.1 release, I did an OS update to 7.3 first, starting with
the engine, then
Hello,
I set the host to maintenance mode and tried to undeploy engine via GUI.
The action in GUI doesn't show an error but afterwards it still shows
only "Undeploy" on hosted-engine tab od the host.
Even removing the host from the cluster doesn't work because the GUI
says "The hosts maekred
The ones you mentioned before, we just need the whole files and not
snippets of them.
vdsm.log, supervdsm.log, messages.log and the ovs ones you previously
mentioned.
On Mon, Feb 6, 2017 at 1:14 PM, Shalabh Goel
wrote:
> which all log files? Actually I am new to Ovirt,
Now I got an error while installing the third node too. I am attaching the
log file.
2017-02-06 16:43:51,488+05 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(VdsDeploy) [2a3cb164-9fe7-4487-9837-1c84c9a6a2d3] EVENT_ID:
VDS_INSTALL_IN_PROGRESS(509), Correlation ID:
which all log files? Actually I am new to Ovirt, so it would be really
helpful if you can tell me which ones??
Thanks
On Mon, Feb 6, 2017 at 4:39 PM, Edward Haas wrote:
> Please package the logs (tar or zip) and send them.
>
> On Mon, Feb 6, 2017 at 12:05 PM, Shalabh Goel
Please package the logs (tar or zip) and send them.
On Mon, Feb 6, 2017 at 12:05 PM, Shalabh Goel
wrote:
> Yes, I am using OVS as the switch type and I did not know that it was not
> supported officially.
>
> The output of ovs-vsctl show is as follows:
>
>
On Sat, Feb 4, 2017 at 9:59 PM, Fernando Fuentes
wrote:
> Hello Sandro,
> Thanks for your reply!
>
> I will do that. I want to make sure though that updating the host will not
> make my guests loose the ability to use spice and nor will it create a
> problem with my oVirt
Hi,
I have 3 nodes. 2 compute and 1 storage (NFS) and separate server for
engine. I upgraded the engine first. I went on smoothly without any errors.
Then I started upgrade on all 3 of them by installing the
ovirt-release41.rpm. But the upgrade timed out and failed on all the 3
nodes.
Then I
On Sat, Feb 4, 2017 at 11:52 AM, Ralf Schenk wrote:
> Hello,
>
> I have set up 3 hosts for engine, 2 of them are working correct. There is
> no other host even having broker/agent installed. Is it possible that the
> error occurs because the hosts are multihomed (Management IP,
Hi all,
In case you missed it, oVirt 4.1.0 gained some support to run container
side to side to VMs.
Read the full story here:
https://fromanirh.github.io/containers-in-ovirt.html
I'll be happy to answer any question - make sure to CC me to have a
faster response time!
Bests,
--
Francesco
Yes, I am using OVS as the switch type and I did not know that it was not
supported officially.
The output of ovs-vsctl show is as follows:
f634d53e-4849-488b-8454-6b1fafa7c6ac
ovs_version: "2.6.90"
I am attaching OVS switch logs below:
/var/log/openvswitch/ovsdb-server.log
Your described setup seems correct.
Please attempt to isolate the issue by trying to pass traffic between the
hosts, taking the VM/s out of the equation.
You may also consider connecting the hosts directly to each other, to make
sure this is not a switch problem.
Thanks,
Edy.
On Mon, Feb 6,
It does show the same Guest Agent Data on the user portal.
Assuming you have added the UserRole permission to the VM, you should see
the VM on the user portal under the Extended tab, similar to what is seen
on the admin portal.
Thanks,
Edy.
On Thu, Feb 2, 2017 at 5:25 PM, Alexandr Krivulya
36 matches
Mail list logo