One of the many cases where nested virtualization would be quite handy for
testing...
If only it worked with oVirt on top of oVirt...
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
>
> Since 4.4 is the last feature release, this will never change even if it is
> not
> documented.
>
> Nir
Hi Nir,
could you please clarfiy: What does "last feature release" mean here: Is oVirt
being feature frozen in preparation to something more drastic?
On Wed, Aug 12, 2020 at 2:25 AM wrote:
> While trying to diagnose an issue with a set of VMs that get stopped for
> I/O problems at startup, I try to deal with the fact that their boot disks
> cause this issue, no matter where I connect them. They might have been the
> first disks I ever tried
On Wed, Aug 12, 2020 at 9:46 AM Lao Dh wrote:
> Update for all. The deployment finally detect the SAS collected storage.
> After manual compile the driver for the RAID control PCI card.
> Nir is correct. FC detect anything that is not "NFS, iSCSI". As this time
> it also detect a local connected
Hi Shani,
Ok, thanks. What is the Glusterfs compatibilty version with oVirt 4.4.2 ?
José
De: "Shani Leviim"
Para: supo...@logicworks.pt
Cc: "users"
Enviadas: Quarta-feira, 12 De Agosto de 2020 10:29:31
Assunto: Re: [ovirt-users] uprade from 4.3 to 4.4
Hi Jose,
It is possible.
You
Hi Strahil,
Ok done; https://bugzilla.redhat.com/show_bug.cgi?id=1868393 only it didn't
allow me to select the most recent 4.3.
Thanks Olaf
Op wo 12 aug. 2020 om 15:58 schreef Strahil Nikolov :
> Hi Olaf,
>
> yes but mark it as '[RFE]' in the name of the bug.
>
> Best Regards,
> Strahil
Hi Olaf,
yes but mark it as '[RFE]' in the name of the bug.
Best Regards,
Strahil Nikolov
На 12 август 2020 г. 12:41:55 GMT+03:00, olaf.buitel...@gmail.com написа:
>Hi Strahil,
>
>It's not really clear how i can pull requests to the oVirt repo.
>I've found this bugzilla issue for going from v5
Hi Strahil,
It's not really clear how i can pull requests to the oVirt repo.
I've found this bugzilla issue for going from v5 to v6;
https://bugzilla.redhat.com/show_bug.cgi?id=1718162 with this corresponding
commit; https://gerrit.ovirt.org/#/c/100701/
Would the correct route be to issue a
Hi Jose,
It is possible.
You can find in this detailed mail Installation instructions, release
notes, and references for more information:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VONS2YAHMTYBKWFCY7HAYDPLV47BO6US/
Please make sure to meet the prerequisites, as in RHEL 8 /
Hey Eyal,
thanks for the explanation. I really would not have guessed that.
Works like a charm, thank you very much!
-Chris
On 12/08/2020 08:06, Eyal Shenitzky wrote:
> Hi Christian,
>
> Once you take a snapshot you can preview it by pressing the
> *preview* button, as you said it will take
Update for all. The deployment finally detect the SAS collected storage. After
manual compile the driver for the RAID control PCI card.
2020年8月8日土曜日 15:14:03 GMT+8、Strahil Nikolov via Users
が書いたメール:
Not when both client and server is the same node and you use
"localhost:/nfs-share"
Update for all. The deployment finally detect the SAS collected storage. After
manual compile the driver for the RAID control PCI card.Nir is correct. FC
detect anything that is not "NFS, iSCSI". As this time it also detect a local
connected SATA SSD.
2020年8月10日月曜日 1:55:37 GMT+8、Nir Soffer
Thanks all of you. The deployment did running and finished. It take 3+ hours
to complete. Compare to previously only take less than an hour.Also, I found
where to check the logs in cockpit. The log default filter to show only
"Warning or above". I change it to show "Everything".
Hi Christian,
Once you take a snapshot you can preview it by pressing the *preview* button,
as you said it will take you back to
the point in time when the snapshot was created.
Once you are in a '*preview*' mode you have two options -
- *commit* - means that you want to go back to that
14 matches
Mail list logo
