[ovirt-users] Re: Remove obsolete Gluster hyperconverged doc

[Sandro Bonazzola]

Il giorno ven 4 feb 2022 alle ore 08:19 Strahil Nikolov <
hunter86...@yahoo.com> ha scritto:

> Hi Sandro,
>
> It seems that with
> https://github.com/oVirt/ovirt-site/commit/f3286b2e1f2871978d054250556f1b4f0eb7f09e#diff-41cf6794ba4200b839c53531555f0f3998df4cbb01a4d5cb0b94e3ca5e23947d
> all refference to Gluster & Hyperconverged is removed from the website.
>
>
> Can you clarify the situation with Hyperconverged deployments ?
>

Hi, the Gluster & Hyperconverged deployment moved outside the documentation
section on the website: https://ovirt.org/dropped/gluster-hyperconverged/
as it's outdated and unmaintained.
GlusterFS is being deprecated for usage on storage domains: Bug 2016359
 - Deprecate usage of
GlusterFS for Storage Domains
And the hyperconverged solution for oVirt is based on GlusterFS, so it's
being deprecated as well.


>
>
> Best Regards,
> Strahil Nikolov
>


-- 

Sandro Bonazzola

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA 

sbona...@redhat.com


*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KEBL4DVAQJZF64JF5UFPCKD2LKXKUMIP/

[ovirt-users] Remove obsolete Gluster hyperconverged doc

[Strahil Nikolov via Users]

Hi Sandro,
It seems that with 
https://github.com/oVirt/ovirt-site/commit/f3286b2e1f2871978d054250556f1b4f0eb7f09e#diff-41cf6794ba4200b839c53531555f0f3998df4cbb01a4d5cb0b94e3ca5e23947d
 all refference to Gluster & Hyperconverged is removed from the website.

Can you clarify the situation with Hyperconverged deployments ?

Best Regards,Strahil Nikolov___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/YA2QQFFXAMJC4B42EEKYO3QX6JHC3MN6/

[ovirt-users] Re: OVIRT-Node Engine Deployment Failure due to no URLs in mirrorlist

[milan . mithbaokar]

Hi,
  we ran into same issues with the engine deployment and its getting stuck at 
the mirror site. let us know if you have any luck?
Thank You,
Our Issue is that we have 4 node cluster(4.4) engine crashed and we were trying 
to restore from engine backup and during restoration its pointing to mirror 
site. we are stuck badly
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/D25PSIURRA6FYZRE5VWNNHLUSXN3CU2O/

[ovirt-users] Hosted Engine down and not visible on any host

[milan . mithbaokar]

Hi,
We have a 4 node ovirt cluster running at 4.4.1.5. We are running it on iSCSI 
shared Storage. The hosted engine is running on its separate iSCSI shared 
storage.
  Hosted Engine went down all of a sudden and no where to be found on any of 
the nodes when I do virsh list --all
  All other VM's are showed in the list but cannot see the hosted engine?

when we try to bring hosted engine up using "hosted-engine --vm-start" it 
errors out with message "vm does not exist". The shared iscsi storage ip on 
which the HE vm was running is pingable, but when we perform "hosted-engine 
--connect-storage" we are getting request timeouts after 60 seconds.

Any ideas to restore back the hosted engine and the cluster highly appreciated.



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3OPG7JI2WO5CSIEWOZXLFUQBD25WFXGQ/

[ovirt-users] Re: Tried updated version of ovirt-node-ng-installer/4.4.10-202202021

[denismalkomail]

Thank you for your work! Now I managed to install Ovirt 4.4.10 version using 
iso image.

In the beginning, I tried updating repositories, clearing dnf cache, and 
restarting the installation, but I couldn't.
When I download a new iso and run from scratch I managed to install it.
I have one more question. 
If I'll want to update ovirt. Will I have a possibility to update it without 
reinstalling from iso again?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Y2WBMRVJQPTYPD33ABBMUL7RJZRELHCK/

[ovirt-users] Re: Unclear how to add local (POSIX) storage

[Nir Soffer]

On Thu, Feb 3, 2022 at 3:42 PM Richard W.M. Jones  wrote:
>
> On Thu, Feb 03, 2022 at 03:07:20PM +0200, Nir Soffer wrote:
> > On Thu, Feb 3, 2022 at 2:30 PM Richard W.M. Jones  wrote:
> > >
> > >
> > > I'm following the instructions here:
> > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/sect-preparing_and_adding_posix_compliant_file_system_storage
> > >
> > > I've also added an extra virtual disk to my host node which appears as
> > > /dev/sdb.  Although the disk is partitioned, /dev/sdb1 is not created.
> > > Is udev broken in oVirt node?
> > >
> > > I cannot see anywhere in the dialog where you specify the name of the
> > > device (eg. "/dev/sdb1").  So how's it supposed to work?
> > >
> > > It doesn't work, giving an information-free error message:
> > >
> > >   Error while executing action Add Storage Connection: Problem while 
> > > trying to mount target
> >
> > You can find more info on the failure in:
> > /var/log/vdsm/supervdsmd.log
>
> vdsm.storage.mount.MountError: Command ['/usr/bin/mount', '-t', 'xfs', 
> '/srv', '/rhev/data-center/mnt/_srv'] failed with rc=32 out=b'' err=b'mount: 
> /rhev/data-center/mnt/_srv: /srv is not a block device.\n'
>
> I suppose it expects the name of the block device (ie. /dev/sdb)
> rather than the mount point there.
>
> It also turns out the new device has been "captured" by multipathd:
>
> # multipath -ll
> 0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1 dm-0 QEMU,QEMU HARDDISK
> size=100G features='1 queue_if_no_path' hwhandler='0' wp=rw
> `-+- policy='service-time 0' prio=1 status=active
>   `- 0:0:0:1 sdb 8:16 active ready running
>
> I've so far not found a way to disable multipathd effectively.  Even
> stopping and disabling the service and rebooting doesn't help so I
> guess something starts it up.

This is expected on oVirt, our multipath configuration is intentionally grabbing
any device that multipath can work with, even if the device only has one path.
The motivation is to be able to configure a system when only one path is
available (maybe you have an hba/network/server issue), and once the other
paths are available the system will use them transparently.

To avoid this issue with local devices, you need to blacklist the device.

Add this file:

$ cat /etc/multipath/conf.d/local.conf
blacklist {
wwid "QEMU HARDDISK"
}

And run (as root):

   multipathd reconfigure

At this point lsblk will show the expected /dev/sdb1 and multipath
will never use this device again.

Adding a serial to the device in libvirt xml will make it easier to blacklist.

>
> > Posix compliant is basically NFS without some mount options:
> > https://github.com/oVirt/vdsm/blob/878407297cb7dc892110ae5d6b0403ca97249247/lib/vdsm/storage/storageServer.py#L174
> >
> > Using a local device on a host is less tested path, I'm not QE is testing
> > this (Avihai, please correct me if you do).
> >
> > If you have multiple hosts, this will break if the local device does not 
> > have
> > the same name on all hosts (so using /dev/sdb1 is very fragile). If you have
> > one host it can be fine.
> >
> > Any reason to add a device to the vm, instead of using an NFS server?
> >
> > I guess that your purpose is testing virt-v2v with oVirt, so you want to 
> > test
> > a common configuration; NFS is very common for oVirt users.
>
> I don't have an NFS server to use for this.

Configuring NFS on some other machine is easy.

I'm using another VM for this, so I can easily test negative flows like stopping
or restarting the NFS server while it is being used by vms or storage
operations.
I'm using 2G alpine vm for this, it works fine even with 1G memory.

Nir
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EHXYNOUEI5ETO57ZNLKBJY76S5IVYFO2/

[ovirt-users] Re: OVIRT-Node Engine Deployment Failure due to no URLs in mirrorlist

[Strahil Nikolov via Users]

To workaround it, you can edit 
'/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/engine_setup/tasks/install_packages.yml'
 and add a task to fix the repo file.
Best Regards,Strahil Nikolov

 
 
  On Thu, Feb 3, 2022 at 13:18, Abe E wrote:   Hey Strahil

2022-02-02 20:20:54,043-0700 INFO ansible ok {'status': 'OK', 'ansible_type': 
'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_host': 'localhost', 'ansible_task': 'Gather facts on installed 
packages', 'task_duration': 3}
2022-02-02 20:20:54,043-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:55,020-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Fail when firewall manager is not 
installed'}
2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Fail when firewall manager is not installed  kwargs 
is_conditional:False 
2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Fail when firewall manager is not installed  kwargs 
2022-02-02 20:20:55,976-0700 INFO ansible skipped {'status': 'SKIPPED', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'Fail when firewall manager is not installed', 'ansible_host': 
'localhost'}
2022-02-02 20:20:55,977-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:56,953-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Install required packages for oVirt 
Engine deployment'}
2022-02-02 20:20:56,953-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Install required packages for oVirt Engine 
deployment  kwargs is_conditional:False 
2022-02-02 20:20:56,954-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Install required packages for oVirt Engine 
deployment  kwargs 
2022-02-02 20:20:57,916-0700 INFO ansible ok {'status': 'OK', 'ansible_type': 
'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_host': 'localhost', 'ansible_task': 'Install required packages for 
oVirt Engine deployment', 'task_duration': 1}
2022-02-02 20:20:57,917-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:57,985-0700 DEBUG ansible on_any args 
/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/engine_setup/tasks/install_packages.yml
 (args={} vars={}): [localhost]  kwargs 
2022-02-02 20:20:58,969-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Install oVirt Engine package'}
2022-02-02 20:20:58,969-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs 
is_conditional:False 
2022-02-02 20:20:58,970-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs 
2022-02-02 20:21:46,955-0700 DEBUG var changed: host "localhost" var 
"ansible_failed_task" type "" value: "{
    "action": "package",
    "any_errors_fatal": false,
    "args": {
        "name": "ovirt-engine",
        "state": "present"
    },
    "async": 0,
    "async_val": 0,
    "become": false,
    "become_exe": null,
    "become_flags": null,
    "become_method": "sudo",
    "become_user": null,
    "changed_when": [],
    "check_mode": false,
    "collections": [
        "ovirt.ovirt",
        "ansible.builtin"
    ],
    "connection": "local",
    "debugger": null,
    "delay": 5,
    "delegate_facts": null,
    "delegate_to": "hyper.hiddendomain.com",
    "diff": false,
    "environment": [
        {}
    ],
    "failed_when": [],
    "finalized": true,
    "ignore_errors": null,
    "ignore_unreachable": null,
    "loop": null,
    "loop_control": null,
    "loop_with": null,
    "module_defaults": [],
    "name": "Install oVirt Engine package",
    "no_log": null,
    "notify": null,
    "poll": 15,
    "port": null,
    "register": null,
    "remote_user": null,
    "retries": 3,
    "run_once": null,
    "squashed": true,
    "tags": [
        "bootstrap_local_vm",
        "never",
        "bootstrap_local_vm",
        "never"
    ],
    "throttle": 0,
    "until": [],
    "uuid": "20040ff4-641c-0f32-a8c8-17e2",
    "vars": {},
    "when": [
        "ovirt_engine_setup_product_type | lower == 'ovirt'"
    ]
}"
2022-02-02 20:21:46,955-0700 DEBUG var changed: host "localhost" var 
"ansible_failed_result" type "" value: "{
    "_ansible_delegated_vars": {
        "ansible_admin_users": null,
        "ansible_async_dir": null,
        "ansible_connection": "smart",
   

[ovirt-users] Re: Ignore CPU_TYPE_UNSUPPORTED_IN_THIS_CLUSTER_VERSION ?

[Strahil Nikolov via Users]

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/configuring_and_managing_virtualization/creating-nested-virtual-machines_configuring-and-managing-virtualization#creating-a-nested-virtual-machine-on-amd_creating-nested-virtual-machines
Best Regards,Strahil Nikolov
 
 
  On Thu, Feb 3, 2022 at 10:53, Richard W.M. Jones wrote:   
On Thu, Feb 03, 2022 at 06:08:55AM +, Strahil Nikolov wrote:
> Host-passthrough & nested virtualization are mandatory.

Yes indeed.  I don't know if I missed this in the docs, but it wasn't
obvious.  However using host-passthrough fixed it.

Rich.

> Best Regards,
> Strahil Nikolov
> 
> 
>    On Wed, Feb 2, 2022 at 18:54, Richard W.M. Jones
>     wrote:
>    On Wed, Feb 02, 2022 at 05:42:33PM +0200, Juhani Rautiainen wrote:
>    > Hi!
>    >
>    > Maybe you have to modify qemu VM CPU settings? I mean that usually if
>    > you don't see the svm flag on AMD CPU, virtualization is not
>    > available. This page suggests changes to qemu CPU model:
>    > https://techviewleo.com/how-to-enable-nested-virtualization-on-kvm-qemu/
>    >
>    > I think that the "host-passthrough" setting should let all the CPU
>    > flags go through to the VM
>    > (https://wiki.openstack.org/wiki/LibvirtXMLCPUModel).
> 
>    Yes, thank you, you are absolutely right.
> 
>    I had the CPU model set to "host-model" (where libvirt tries to create
>    a model approximating the host).  Changing it to "host-passthrough"
>    (ie. same as qemu -cpu host) fixed it and allowed me to install oVirt
>    node in the guest and activate it.
> 
>    Rich.
> 
>    --
>    Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/
>    ~rjones
>    Read my programming and virtualization blog: http://rwmj.wordpress.com
>    virt-df lists disk usage of guests without needing to install any
>    software inside the virtual machine.  Supports Linux and Windows.
>    http://people.redhat.com/~rjones/virt-df/
>    
>    ___
>    Users mailing list -- users@ovirt.org
>    To unsubscribe send an email to users-le...@ovirt.org
>    Privacy Statement: https://www.ovirt.org/privacy-policy.html
>    oVirt Code of Conduct: https://www.ovirt.org/community/about/
>    community-guidelines/
>    List Archives:
>    https://lists.ovirt.org/archives/list/users@ovirt.org/message/
>    W4434OIVOGS2KCGVISROD6Y7JPLP6MNS/
>    
> 

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/FIR2NPU2FVCNMXVJSEJ27I3ONPVWTB7K/
  
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3ULBFHQ7DAVNQEENTFKRCT7IVSUQFUM5/

[ovirt-users] Re: Installing a windows vm from importing an OVA Template

[Strahil Nikolov via Users]

I think there was a bug discussed on the list.
Best Regards,Strahil Nikolov
 
 
  On Thu, Feb 3, 2022 at 8:37, moizr--- via Users wrote:   We 
are trying to create a windows vm on OLVM/OVirt. Below are the steps we followed

 - Exported an OVF of a plain windows vm from vmware. 
 - Imported it as an OVA to OLVM
 - Start the VM after change OS type to Windows 2016. 

As soon as we select Windows 2016 the server doesnt start but works when we 
make it as other OS. We want to automated provisioning and setup of the vm 
through sysprep but the vm doesnt start once we select OS as Windows on the 
template or any vm created out of that template. 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VB7UUXUC2O6V3XJ6NUJTTGRMKTB2DISX/
  
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6XKCM77I3Q2DOTJ22JVVMIEWPJ2XELNP/

[ovirt-users] Re: How to clean stale engine from "hosted-engine unknow stale-data"

[Ayansh Rocks]

I restarted the host and it seems like it's running fine...However do it
need to reboot other hosts or restart some services on other hosts as well
clean this up. Because they still can see the Host ID=3
[root@iondelsvr10 vdsm]# hosted-engine --vm-status


--== Host iondelsvr10.iontrading.com (id: 1) status ==--

Host ID: 1
Host timestamp : 2672943
Score  : 3400
Engine status  : {"vm": "down", "health": "bad",
"detail": "unknown", "reason": "vm not running on this host"}
Hostname   : iondelsvr10.iontrading.com
Local maintenance  : False
stopped: False
crc32  : b737573e
conf_on_shared_storage : True
local_conf_timestamp   : 2672943
Status up-to-date  : True
Extra metadata (valid at timestamp):
metadata_parse_version=1
metadata_feature_version=1
timestamp=2672943 (Thu Feb  3 20:09:34 2022)
host-id=1
score=3400
vm_conf_refresh_time=2672943 (Thu Feb  3 20:09:34 2022)
conf_on_shared_storage=True
maintenance=False
state=EngineDown
stopped=False


--== Host iondelsvr11.iontrading.com (id: 2) status ==--

Host ID: 2
Host timestamp : 6255602
Score  : 3400
Engine status  : {"vm": "down", "health": "bad",
"detail": "unknown", "reason": "vm not running on this host"}
Hostname   : iondelsvr11.iontrading.com
Local maintenance  : False
stopped: False
crc32  : 5ff71c1a
conf_on_shared_storage : True
local_conf_timestamp   : 6255602
Status up-to-date  : True
Extra metadata (valid at timestamp):
metadata_parse_version=1
metadata_feature_version=1
timestamp=6255602 (Thu Feb  3 20:09:24 2022)
host-id=2
score=3400
vm_conf_refresh_time=6255602 (Thu Feb  3 20:09:24 2022)
conf_on_shared_storage=True
maintenance=False
state=EngineDown
stopped=False


--== Host iondelsvr12.iontrading.com (id: 3) status ==--

Host ID: 3
Host timestamp : 734
Score  : 1800
Engine status  : unknown stale-data
Hostname   : iondelsvr12.iontrading.com
Local maintenance  : False
stopped: False
crc32  : 062e92e9
conf_on_shared_storage : True
local_conf_timestamp   : 734
Status up-to-date  : False
Extra metadata (valid at timestamp):
metadata_parse_version=1
metadata_feature_version=1
timestamp=734 (Fri Jan 28 17:35:18 2022)
host-id=3
score=1800
vm_conf_refresh_time=734 (Fri Jan 28 17:35:18 2022)
conf_on_shared_storage=True
maintenance=False
state=EngineDown
stopped=False


--== Host iondelsvr14.iontrading.com (id: 4) status ==--

Host ID: 4
Host timestamp : 2670
Score  : 3400
Engine status  : {"vm": "up", "health": "good",
"detail": "Up"}
Hostname   : iondelsvr14.iontrading.com
Local maintenance  : False
stopped: False
crc32  : fdf46b17
conf_on_shared_storage : True
local_conf_timestamp   : 2670
Status up-to-date  : True
Extra metadata (valid at timestamp):
metadata_parse_version=1
metadata_feature_version=1
timestamp=2670 (Thu Feb  3 20:09:30 2022)
host-id=4
score=3400
vm_conf_refresh_time=2670 (Thu Feb  3 20:09:30 2022)
conf_on_shared_storage=True
maintenance=False
state=EngineUp
stopped=False
[root@iondelsvr10 vdsm]#

On Thu, Feb 3, 2022 at 6:54 PM Ayansh Rocks 
wrote:

> VDSM Logs -
>
> ual': True}} from=internal, task_id=b017c5d2-a941-4ccd-af02-3fac0a767df5
> (api:54)
> 2022-02-03 18:53:53,368+0530 ERROR (periodic/3)
> [ovirt_hosted_engine_ha.client.client.HAClient] Malformed metadata for host
> 3: received 0 of 512 expected bytes (client:137)
> 2022-02-03 18:53:54,529+0530 INFO  (jsonrpc/5) [api.host] START getStats()
> from=::1,38990 (api:48)
> 2022-02-03 18:53:54,543+0530 INFO  (jsonrpc/5) [vdsm.api] START
> repoStats(domains=()) from=::1,38990,
> task_id=3864f22e-98cc-426f-a4d5-2e2254f34aae (api:48)
> 2022-02-03 18:53:54,543+0530 INFO  (jsonrpc/5) [vdsm.api] FINISH repoStats
> return={'8ab8b572-39a3-4603-b0e7-2b6fe71c4d73': {'code': 0, 'lastCheck':
> '6.3', 'delay': '0.000359743', 'valid': True, 'version': 5, 'acquired':
> 

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Lev Veyde]

Thanks for the update!

On Thu, Feb 3, 2022 at 3:48 PM Abe E  wrote:

> Can confirm the new update resolved the issue.
>
> Thank You
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/K2UXOB7P5G2ZV6LO7R56HIVMDCGC2NV2/
>


-- 

Lev Veyde

Senior Software Engineer, RHCE | RHCVA | MCITP

Red Hat Israel



l...@redhat.com | lve...@redhat.com

TRIED. TESTED. TRUSTED. 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OUIIXWDVJXEU5R6F6RU54X74WQYV263C/

[ovirt-users] Re: Unclear how to add local (POSIX) storage

[Gianluca Cecchi]

On Thu, Feb 3, 2022 at 1:30 PM Richard W.M. Jones  wrote:

>
> I'm following the instructions here:
>
> https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/sect-preparing_and_adding_posix_compliant_file_system_storage
>
> I've also added an extra virtual disk to my host node which appears as
> /dev/sdb.  Although the disk is partitioned, /dev/sdb1 is not created.
> Is udev broken in oVirt node?
>
>
As you write the term "local", if you plan to have only one host and not
add any other in the future for this environment, you had better creating a
DC/Cluster of type "Local" (versus "Shared") and then a storage domain of
type "Local on Host", where you give it the path where you mounted your
additional disk (with correct permissions).
I've been using it for many months on one environment with only one very
big server (1,5Tb of ram and 2 NVME disks, each 2Tb in size), currently
with 36 VMs running without problem. Now at 4.4.10 async 2.
The host is now based on Rocky Linux 8.5 (previously CentOS 8.4) with a
standalone engine, also that one now based on Rocky Linux 8.5) that is a VM
on an external vSphere environment.
This same environment previously was based on a single host gluster
configuration and I converted it to this configuration without loss of
VMs/data (I detached and then imported the previously gluster based fs).
HIH,
Gianluca
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Y62VI36WEFNJR57JAZPCMD66PI6VWDVD/

[ovirt-users] Re: Unclear how to add local (POSIX) storage

[Richard W.M. Jones]

On Thu, Feb 03, 2022 at 03:07:20PM +0200, Nir Soffer wrote:
> On Thu, Feb 3, 2022 at 2:30 PM Richard W.M. Jones  wrote:
> >
> >
> > I'm following the instructions here:
> > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/sect-preparing_and_adding_posix_compliant_file_system_storage
> >
> > I've also added an extra virtual disk to my host node which appears as
> > /dev/sdb.  Although the disk is partitioned, /dev/sdb1 is not created.
> > Is udev broken in oVirt node?
> >
> > I cannot see anywhere in the dialog where you specify the name of the
> > device (eg. "/dev/sdb1").  So how's it supposed to work?
> >
> > It doesn't work, giving an information-free error message:
> >
> >   Error while executing action Add Storage Connection: Problem while trying 
> > to mount target
> 
> You can find more info on the failure in:
> /var/log/vdsm/supervdsmd.log

vdsm.storage.mount.MountError: Command ['/usr/bin/mount', '-t', 'xfs', '/srv', 
'/rhev/data-center/mnt/_srv'] failed with rc=32 out=b'' err=b'mount: 
/rhev/data-center/mnt/_srv: /srv is not a block device.\n'

I suppose it expects the name of the block device (ie. /dev/sdb)
rather than the mount point there.

It also turns out the new device has been "captured" by multipathd:

# multipath -ll
0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1 dm-0 QEMU,QEMU HARDDISK
size=100G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=1 status=active
  `- 0:0:0:1 sdb 8:16 active ready running

I've so far not found a way to disable multipathd effectively.  Even
stopping and disabling the service and rebooting doesn't help so I
guess something starts it up.

> Posix compliant is basically NFS without some mount options:
> https://github.com/oVirt/vdsm/blob/878407297cb7dc892110ae5d6b0403ca97249247/lib/vdsm/storage/storageServer.py#L174
> 
> Using a local device on a host is less tested path, I'm not QE is testing
> this (Avihai, please correct me if you do).
> 
> If you have multiple hosts, this will break if the local device does not have
> the same name on all hosts (so using /dev/sdb1 is very fragile). If you have
> one host it can be fine.
> 
> Any reason to add a device to the vm, instead of using an NFS server?
>
> I guess that your purpose is testing virt-v2v with oVirt, so you want to test
> a common configuration; NFS is very common for oVirt users.

I don't have an NFS server to use for this.

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines.  Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TXOKEW3KY3IEB32SMK2OFRORN6WRSYY3/

[ovirt-users] Re: How to clean stale engine from "hosted-engine unknow stale-data"

[Ayansh Rocks]

VDSM Logs -

ual': True}} from=internal, task_id=b017c5d2-a941-4ccd-af02-3fac0a767df5
(api:54)
2022-02-03 18:53:53,368+0530 ERROR (periodic/3)
[ovirt_hosted_engine_ha.client.client.HAClient] Malformed metadata for host
3: received 0 of 512 expected bytes (client:137)
2022-02-03 18:53:54,529+0530 INFO  (jsonrpc/5) [api.host] START getStats()
from=::1,38990 (api:48)
2022-02-03 18:53:54,543+0530 INFO  (jsonrpc/5) [vdsm.api] START
repoStats(domains=()) from=::1,38990,
task_id=3864f22e-98cc-426f-a4d5-2e2254f34aae (api:48)
2022-02-03 18:53:54,543+0530 INFO  (jsonrpc/5) [vdsm.api] FINISH repoStats
return={'8ab8b572-39a3-4603-b0e7-2b6fe71c4d73': {'code': 0, 'lastCheck':
'6.3', 'delay': '0.000359743', 'valid': True, 'version': 5, 'acquired':
True, 'actual': True}, 'f3114b74-8b12-4493-9faf-0f514afa3a16': {'code': 0,
'lastCheck': '2.1', 'delay': '0.000447464', 'valid': True, 'version': 5,
'acquired': True, 'actual': True}, '26bfbe5d-e427-47a9-9111-cca8a628fea8':
{'code': 0, 'lastCheck': '2.0', 'delay': '0.00034851', 'valid': True,
'version': 5, 'acquired': True, 'actual': True},
'23540fa8-4de2-4715-97e1-4ce9fe4f66cc': {'code': 0, 'lastCheck': '2.1',
'delay': '0.000352501', 'valid': True, 'version': 5, 'acquired': True,
'actual': True}, '8fa0a28e-480f-444c-9cf2-bef536d3c52f': {'code': 0,
'lastCheck': '2.0', 'delay': '0.000320087', 'valid': True, 'version': 5,
'acquired': True, 'actual': True}, 'd1dba7f5-cb30-4571-8fe6-5fb5005bcdb2':
{'code': 0, 'lastCheck': '2.6', 'delay': '0.000452836', 'valid': True,
'version': 0, 'acquired': True, 'actual': True},
'88b94c9a-6855-4199-9d37-1f88d21f211c': {'code': 0, 'lastCheck': '2.0',
'delay': '0.000299592', 'valid': True, 'version': 5, 'acquired': True,
'actual': True}, '2e0ec671-5972-4276-aa49-aefc306f5da4': {'code': 0,
'lastCheck': '2.0', 'delay': '0.000316513', 'valid': True, 'version': 5,
'acquired': True, 'actual': True}} from=::1,38990,
task_id=3864f22e-98cc-426f-a4d5-2e2254f34aae (api:54)
2022-02-03 18:53:54,543+0530 INFO  (jsonrpc/5) [vdsm.api] START
multipath_health() from=::1,38990,
task_id=7ecaad0c-aa5d-45c0-96a5-dffc78572248 (api:48)
2022-02-03 18:53:54,543+0530 INFO  (jsonrpc/5) [vdsm.api] FINISH
multipath_health return={} from=::1,38990,
task_id=7ecaad0c-aa5d-45c0-96a5-dffc78572248 (api:54)
2022-02-03 18:53:54,548+0530 ERROR (jsonrpc/5)
[ovirt_hosted_engine_ha.client.client.HAClient] Malformed metadata for host
3: received 0 of 512 expected bytes (client:137)
2022-02-03 18:53:54,549+0530 INFO  (jsonrpc/5) [api.host] FINISH getStats
return={'status': {'code': 0, 'message': 'Done'}, 'info': (suppressed)}
from=::1,38990 (api:54)
2022-02-03 18:53:56,038+0530 INFO  (jsonrpc/4) [vdsm.api] START
repoStats(domains=['8ab8b572-39a3-4603-b0e7-2b6fe71c4d73']) from=::1,38990,
task_id=8855f314-9334-4b06-88e3-7a1a3f577049 (api:48)
2022-02-03 18:53:56,038+0530 INFO  (jsonrpc/4) [vdsm.api] FINISH repoStats
return={'8ab8b572-39a3-4603-b0e7-2b6fe71c4d73': {'code': 0, 'lastCheck':
'1.3', 'delay': '0.000349788', 'valid': True, 'version': 5, 'acquired':
True, 'actual': True}} from=::1,38990,
task_id=8855f314-9334-4b06-88e3-7a1a3f577049 (api:54)



On Thu, Feb 3, 2022 at 6:42 PM Martin Sivak  wrote:

>
>
> On Thu, Feb 3, 2022 at 1:50 PM Ayansh Rocks 
> wrote:
>
>> Do I need to clean it from every host which has the hosted engine ? Sinc
>> the other host still can see it.
>>
>
> No, the metadata "whiteboard" is shared. Just one copy that you removed.
> Once node 3 start reporting again, it will simply put new content in there.
>
> Not sure about vdsm, maybe some component (vdsm, engine) is still trying
> to get status of node 3. I have been away for too long, so Didi will have
> to pitch in.
>
> Martin Sivak
>
>
>
>>
>> On Thu, Feb 3, 2022 at 6:02 PM Ayansh Rocks 
>> wrote:
>>
>>> Hi Yedidyah,
>>>
>>> Thanks, After cleaning it from one host i am getting below error
>>> messages on /var/log/messages
>>>
>>> Feb  3 18:01:02 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:17 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:18 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>>> host 3: received 0 of 512 expected bytes
>>> Feb  3 18:01:23 iondelsvr14 

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Abe E]

Can confirm the new update resolved the issue.

Thank You
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/K2UXOB7P5G2ZV6LO7R56HIVMDCGC2NV2/

[ovirt-users] Re: How to clean stale engine from "hosted-engine unknow stale-data"

[Martin Sivak]

On Thu, Feb 3, 2022 at 1:50 PM Ayansh Rocks 
wrote:

> Do I need to clean it from every host which has the hosted engine ? Sinc
> the other host still can see it.
>

No, the metadata "whiteboard" is shared. Just one copy that you removed.
Once node 3 start reporting again, it will simply put new content in there.

Not sure about vdsm, maybe some component (vdsm, engine) is still trying to
get status of node 3. I have been away for too long, so Didi will have to
pitch in.

Martin Sivak



>
> On Thu, Feb 3, 2022 at 6:02 PM Ayansh Rocks 
> wrote:
>
>> Hi Yedidyah,
>>
>> Thanks, After cleaning it from one host i am getting below error messages
>> on /var/log/messages
>>
>> Feb  3 18:01:02 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:17 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:18 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>> Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for
>> host 3: received 0 of 512 expected bytes
>>
>>
>> On Thu, Feb 3, 2022 at 1:04 PM Yedidyah Bar David 
>> wrote:
>>
>>> On Thu, Feb 3, 2022 at 9:11 AM Ayansh Rocks
>>>  wrote:
>>> >
>>> > Hi Yedidyah,
>>> >
>>> > I am thinking to do below -
>>> >
>>> > # hosted-engine --set-maintenance --mode=global
>>> > # hosted-engine --clean-metadata --host-id= --force-clean"
>>> >
>>> > I hope it is safe and tested ?
>>>
>>> It is tested, and it's "safe" as in "Does what it's designed to do".
>>>
>>> It's definitely not "safe" as in "riskless" - if you make a mistake,
>>> you risk damage. I didn't use it myself recently, and do not remember
>>> details anymore. It's definitely not something that you are supposed
>>> to use/need casually.
>>>
>>
It should be safe in global maintenance, the only risk is when you remove
the report of a node that currently runs the engine. As other nodes might
decide that the engine needs restarting.



> If unsure, and if your environment is important to you (not just some
>>> test/dev/learn thing), I warmly suggest to try this first on a test
>>> env (can be done with nested-kvm VMs, no need for physical machines
>>> for this).
>>>
>>> That said, others on this list (and elsewhere) did use it successfully,
>>> and I recommend again to search for examples/reports/experiences.
>>>
>>> Good luck and best regards,
>>>
>>> >
>>> > Thanks
>>> >
>>> > On Thu, Feb 3, 2022 at 12:17 PM Yedidyah Bar David 
>>> wrote:
>>> >>
>>> >> On Thu, Feb 3, 2022 at 5:53 AM Ayansh Rocks
>>> >>  wrote:
>>> >> >
>>> >> > Hi All,
>>> >> >
>>> >> > How to clean stale hosted engine from the database. I want to
>>> remove host id=3
>>> >>
>>> >> Perhaps by using the options '--clean_metadata' and '--host-id'
>>> >> of the command 'hosted-engine'.
>>> >> You can check documentation, list archives, etc. for details.
>>> >>
>>> >> Good luck and best regards,
>>> >> --
>>> >> Didi
>>> >>
>>>
>>>
>>> --
>>> Didi
>>>
>>> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/IR3SMGNMRRGEKXUXTMCZBINAX6XZDRM5/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/C5QZMCH5VSXZRWAG65FOWGX6MV3YZYSO/

[ovirt-users] Re: Tried updated version of ovirt-node-ng-installer/4.4.10-202202021

[Abe E]

Run dnf install -y 
https://resources.ovirt.org/pub/ovirt-4.4/rpm/el8/x86_64/ovirt-engine-appliance-4.4-20220203103124.1.el8.x86_64.rpm

This new update fixed it for me, was having the same issue.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TIDTVMRJZ53JM5U3OJ64ZK3FEIHFXN54/

[ovirt-users] Re: How to clean stale engine from "hosted-engine unknow stale-data"

[Yedidyah Bar David]

On Thu, Feb 3, 2022 at 2:48 PM Ayansh Rocks
 wrote:
>
> Do I need to clean it from every host which has the hosted engine ? Sinc the 
> other host still can see it.

Are you sure it's reading the same space? Perhaps there is some
misconfiguration or something? Caching?

>
> On Thu, Feb 3, 2022 at 6:02 PM Ayansh Rocks  
> wrote:
>>
>> Hi Yedidyah,
>>
>> Thanks, After cleaning it from one host i am getting below error messages on 
>> /var/log/messages
>>
>> Feb  3 18:01:02 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:17 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:18 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes
>> Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host 
>> 3: received 0 of 512 expected bytes

Not sure. Perhaps try to restart the ha broker, agent or both.
If you do this in global maintenance, I think it should be safe -
wait until everything looks ok before exiting global maint.

Check also vdsm and ha logs.

Good luck and best regards,
-- 
Didi
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6RNYC7C6GNWXS46IFNJLRBNOSLKDGD62/

[ovirt-users] Re: Unclear how to add local (POSIX) storage

[Nir Soffer]

On Thu, Feb 3, 2022 at 2:30 PM Richard W.M. Jones  wrote:
>
>
> I'm following the instructions here:
> https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/sect-preparing_and_adding_posix_compliant_file_system_storage
>
> I've also added an extra virtual disk to my host node which appears as
> /dev/sdb.  Although the disk is partitioned, /dev/sdb1 is not created.
> Is udev broken in oVirt node?
>
> I cannot see anywhere in the dialog where you specify the name of the
> device (eg. "/dev/sdb1").  So how's it supposed to work?
>
> It doesn't work, giving an information-free error message:
>
>   Error while executing action Add Storage Connection: Problem while trying 
> to mount target

You can find more info on the failure in:
/var/log/vdsm/supervdsmd.log

Posix compliant is basically NFS without some mount options:
https://github.com/oVirt/vdsm/blob/878407297cb7dc892110ae5d6b0403ca97249247/lib/vdsm/storage/storageServer.py#L174

Using a local device on a host is less tested path, I'm not QE is testing
this (Avihai, please correct me if you do).

If you have multiple hosts, this will break if the local device does not have
the same name on all hosts (so using /dev/sdb1 is very fragile). If you have
one host it can be fine.

Any reason to add a device to the vm, instead of using an NFS server?

I guess that your purpose is testing virt-v2v with oVirt, so you want to test
a common configuration; NFS is very common for oVirt users.

Nir
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NPJMTKRFVAXPDSJCAFJSYWUE4NS4AS6S/

[ovirt-users] Re: How to clean stale engine from "hosted-engine unknow stale-data"

[Ayansh Rocks]

Do I need to clean it from every host which has the hosted engine ? Sinc
the other host still can see it.

On Thu, Feb 3, 2022 at 6:02 PM Ayansh Rocks 
wrote:

> Hi Yedidyah,
>
> Thanks, After cleaning it from one host i am getting below error messages
> on /var/log/messages
>
> Feb  3 18:01:02 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:17 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:18 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
> Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
> 3: received 0 of 512 expected bytes
>
>
> On Thu, Feb 3, 2022 at 1:04 PM Yedidyah Bar David  wrote:
>
>> On Thu, Feb 3, 2022 at 9:11 AM Ayansh Rocks
>>  wrote:
>> >
>> > Hi Yedidyah,
>> >
>> > I am thinking to do below -
>> >
>> > # hosted-engine --set-maintenance --mode=global
>> > # hosted-engine --clean-metadata --host-id= --force-clean"
>> >
>> > I hope it is safe and tested ?
>>
>> It is tested, and it's "safe" as in "Does what it's designed to do".
>>
>> It's definitely not "safe" as in "riskless" - if you make a mistake,
>> you risk damage. I didn't use it myself recently, and do not remember
>> details anymore. It's definitely not something that you are supposed
>> to use/need casually.
>>
>> If unsure, and if your environment is important to you (not just some
>> test/dev/learn thing), I warmly suggest to try this first on a test
>> env (can be done with nested-kvm VMs, no need for physical machines
>> for this).
>>
>> That said, others on this list (and elsewhere) did use it successfully,
>> and I recommend again to search for examples/reports/experiences.
>>
>> Good luck and best regards,
>>
>> >
>> > Thanks
>> >
>> > On Thu, Feb 3, 2022 at 12:17 PM Yedidyah Bar David 
>> wrote:
>> >>
>> >> On Thu, Feb 3, 2022 at 5:53 AM Ayansh Rocks
>> >>  wrote:
>> >> >
>> >> > Hi All,
>> >> >
>> >> > How to clean stale hosted engine from the database. I want to remove
>> host id=3
>> >>
>> >> Perhaps by using the options '--clean_metadata' and '--host-id'
>> >> of the command 'hosted-engine'.
>> >> You can check documentation, list archives, etc. for details.
>> >>
>> >> Good luck and best regards,
>> >> --
>> >> Didi
>> >>
>>
>>
>> --
>> Didi
>>
>>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IR3SMGNMRRGEKXUXTMCZBINAX6XZDRM5/

[ovirt-users] Re: How to clean stale engine from "hosted-engine unknow stale-data"

[Ayansh Rocks]

Hi Yedidyah,

Thanks, After cleaning it from one host i am getting below error messages
on /var/log/messages

Feb  3 18:01:02 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:03 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:13 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:17 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:18 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes
Feb  3 18:01:23 iondelsvr14 vdsm[11893]: ERROR Malformed metadata for host
3: received 0 of 512 expected bytes


On Thu, Feb 3, 2022 at 1:04 PM Yedidyah Bar David  wrote:

> On Thu, Feb 3, 2022 at 9:11 AM Ayansh Rocks
>  wrote:
> >
> > Hi Yedidyah,
> >
> > I am thinking to do below -
> >
> > # hosted-engine --set-maintenance --mode=global
> > # hosted-engine --clean-metadata --host-id= --force-clean"
> >
> > I hope it is safe and tested ?
>
> It is tested, and it's "safe" as in "Does what it's designed to do".
>
> It's definitely not "safe" as in "riskless" - if you make a mistake,
> you risk damage. I didn't use it myself recently, and do not remember
> details anymore. It's definitely not something that you are supposed
> to use/need casually.
>
> If unsure, and if your environment is important to you (not just some
> test/dev/learn thing), I warmly suggest to try this first on a test
> env (can be done with nested-kvm VMs, no need for physical machines
> for this).
>
> That said, others on this list (and elsewhere) did use it successfully,
> and I recommend again to search for examples/reports/experiences.
>
> Good luck and best regards,
>
> >
> > Thanks
> >
> > On Thu, Feb 3, 2022 at 12:17 PM Yedidyah Bar David 
> wrote:
> >>
> >> On Thu, Feb 3, 2022 at 5:53 AM Ayansh Rocks
> >>  wrote:
> >> >
> >> > Hi All,
> >> >
> >> > How to clean stale hosted engine from the database. I want to remove
> host id=3
> >>
> >> Perhaps by using the options '--clean_metadata' and '--host-id'
> >> of the command 'hosted-engine'.
> >> You can check documentation, list archives, etc. for details.
> >>
> >> Good luck and best regards,
> >> --
> >> Didi
> >>
>
>
> --
> Didi
>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OOOTBJUH2I27UF3QLU2CEECQIFRINP7F/

[ovirt-users] Unclear how to add local (POSIX) storage

[Richard W.M. Jones]

I'm following the instructions here:
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/sect-preparing_and_adding_posix_compliant_file_system_storage

I've also added an extra virtual disk to my host node which appears as
/dev/sdb.  Although the disk is partitioned, /dev/sdb1 is not created.
Is udev broken in oVirt node?

I cannot see anywhere in the dialog where you specify the name of the
device (eg. "/dev/sdb1").  So how's it supposed to work?

It doesn't work, giving an information-free error message:

  Error while executing action Add Storage Connection: Problem while trying to 
mount target

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines.  Supports shell scripting,
bindings from many languages.  http://libguestfs.org
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TBRERXNEEUYEFW2FAZUWVLF5TFODFGKM/

[ovirt-users] Re: Tried updated version of ovirt-node-ng-installer/4.4.10-202202021

[Lev Veyde]

Hi Denis,

The issue you faced is most probably due to the appliance.
We've just released an updated appliance today, which should solve this
issue.

Please let us know if the issue still persists.

Thanks in advance,

On Thu, Feb 3, 2022 at 8:45 AM  wrote:

> Hello team!
> I faced the same mirror issue for two days. I saw you pushed a new iso
> image and tried it, but still the same. I use this one
> https://resources.ovirt.org/pub/ovirt-4.4/iso/ovirt-node-ng-installer/4.4.10-2022020214/el8/
>
> Error message:
> ```
>  ERROR ] fatal: [localhost -> 192.168.222.253]: FAILED! => {"changed":
> false, "msg": "Failed to download metadata for repo
> 'ovirt-4.4-centos-gluster8': Cannot prepare internal mirrorlist: No URLs in
> mirrorlist", "rc": 1, "results": []}
> ```
> Did you merge PR with mirror changes?
>
> Best regards, Denis
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/MUKJP7DKBOLLPFSCECPBJPBTQHJLWETT/
>


-- 

Lev Veyde

Senior Software Engineer, RHCE | RHCVA | MCITP

Red Hat Israel



l...@redhat.com | lve...@redhat.com

TRIED. TESTED. TRUSTED. 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/YQ5HLVJOTWZRL6EEVTOPKF6QNU5UPAPT/

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Lev Veyde]

Hi Abe,

We just released a new appliance.
Can you please try to update to the latest version to see if it works now?

The latest version of the package is:
https://resources.ovirt.org/pub/ovirt-4.4/rpm/el8/x86_64/ovirt-engine-appliance-4.4-20220203103124.1.el8.x86_64.rpm

Thanks in advance,

On Thu, Feb 3, 2022 at 1:13 PM Abe E  wrote:

> The logs are big, not sure if you want more than this:
>
> 2022-02-02 20:20:54,043-0700 INFO ansible ok {'status': 'OK',
> 'ansible_type': 'task', 'ansible_playbook':
> '/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml',
> 'ansible_host': 'localhost', 'ansible_task': 'Gather facts on installed
> packages', 'task_duration': 3}
> 2022-02-02 20:20:54,043-0700 DEBUG ansible on_any args
>   kwargs
> 2022-02-02 20:20:55,020-0700 INFO ansible task start {'status': 'OK',
> 'ansible_type': 'task', 'ansible_playbook':
> '/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml',
> 'ansible_task': 'ovirt.ovirt.engine_setup : Fail when firewall manager is
> not installed'}
> 2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args TASK:
> ovirt.ovirt.engine_setup : Fail when firewall manager is not installed
> kwargs is_conditional:False
> 2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args localhost TASK:
> ovirt.ovirt.engine_setup : Fail when firewall manager is not installed
> kwargs
> 2022-02-02 20:20:55,976-0700 INFO ansible skipped {'status': 'SKIPPED',
> 'ansible_type': 'task', 'ansible_playbook':
> '/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml',
> 'ansible_task': 'Fail when firewall manager is not installed',
> 'ansible_host': 'localhost'}
> 2022-02-02 20:20:55,977-0700 DEBUG ansible on_any args
>   kwargs
> 2022-02-02 20:20:56,953-0700 INFO ansible task start {'status': 'OK',
> 'ansible_type': 'task', 'ansible_playbook':
> '/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml',
> 'ansible_task': 'ovirt.ovirt.engine_setup : Install required packages for
> oVirt Engine deployment'}
> 2022-02-02 20:20:56,953-0700 DEBUG ansible on_any args TASK:
> ovirt.ovirt.engine_setup : Install required packages for oVirt Engine
> deployment  kwargs is_conditional:False
> 2022-02-02 20:20:56,954-0700 DEBUG ansible on_any args localhost TASK:
> ovirt.ovirt.engine_setup : Install required packages for oVirt Engine
> deployment  kwargs
> 2022-02-02 20:20:57,916-0700 INFO ansible ok {'status': 'OK',
> 'ansible_type': 'task', 'ansible_playbook':
> '/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml',
> 'ansible_host': 'localhost', 'ansible_task': 'Install required packages for
> oVirt Engine deployment', 'task_duration': 1}
> 2022-02-02 20:20:57,917-0700 DEBUG ansible on_any args
>   kwargs
> 2022-02-02 20:20:57,985-0700 DEBUG ansible on_any args
> /usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/engine_setup/tasks/install_packages.yml
> (args={} vars={}): [localhost]  kwargs
> 2022-02-02 20:20:58,969-0700 INFO ansible task start {'status': 'OK',
> 'ansible_type': 'task', 'ansible_playbook':
> '/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml',
> 'ansible_task': 'ovirt.ovirt.engine_setup : Install oVirt Engine package'}
> 2022-02-02 20:20:58,969-0700 DEBUG ansible on_any args TASK:
> ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs
> is_conditional:False
> 2022-02-02 20:20:58,970-0700 DEBUG ansible on_any args localhost TASK:
> ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs
> 2022-02-02 20:21:46,955-0700 DEBUG var changed: host "localhost" var
> "ansible_failed_task" type "" value: "{
> "action": "package",
> "any_errors_fatal": false,
> "args": {
> "name": "ovirt-engine",
> "state": "present"
> },
> "async": 0,
> "async_val": 0,
> "become": false,
> "become_exe": null,
> "become_flags": null,
> "become_method": "sudo",
> "become_user": null,
> "changed_when": [],
> "check_mode": false,
> "collections": [
> "ovirt.ovirt",
> "ansible.builtin"
> ],
> "connection": "local",
> "debugger": null,
> "delay": 5,
> "delegate_facts": null,
> "delegate_to": "hyper.hiddendomain.com",
> "diff": false,
> "environment": [
> {}
> ],
> "failed_when": [],
> "finalized": true,
> "ignore_errors": null,
> "ignore_unreachable": null,
> "loop": null,
> "loop_control": null,
> "loop_with": null,
> "module_defaults": [],
> "name": "Install oVirt Engine package",
> "no_log": null,
> "notify": null,
> "poll": 15,
> "port": null,
> "register": null,
> "remote_user": null,
> "retries": 3,
> "run_once": null,
> "squashed": true,
> "tags": [
> "bootstrap_local_vm",
> "never",
> "bootstrap_local_vm",
> "never"
> ],
> "throttle": 0,
> "until": [],
> "uuid": "20040ff4-641c-0f32-a8c8-17e2",
> "vars": {},
> "when": [
> 

[ovirt-users] Re: OVIRT-Node Engine Deployment Failure due to no URLs in mirrorlist

[Abe E]

Hey Strahil

2022-02-02 20:20:54,043-0700 INFO ansible ok {'status': 'OK', 'ansible_type': 
'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_host': 'localhost', 'ansible_task': 'Gather facts on installed 
packages', 'task_duration': 3}
2022-02-02 20:20:54,043-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:55,020-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Fail when firewall manager is not 
installed'}
2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Fail when firewall manager is not installed  kwargs 
is_conditional:False 
2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Fail when firewall manager is not installed  kwargs 
2022-02-02 20:20:55,976-0700 INFO ansible skipped {'status': 'SKIPPED', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'Fail when firewall manager is not installed', 'ansible_host': 
'localhost'}
2022-02-02 20:20:55,977-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:56,953-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Install required packages for oVirt 
Engine deployment'}
2022-02-02 20:20:56,953-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Install required packages for oVirt Engine 
deployment  kwargs is_conditional:False 
2022-02-02 20:20:56,954-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Install required packages for oVirt Engine 
deployment  kwargs 
2022-02-02 20:20:57,916-0700 INFO ansible ok {'status': 'OK', 'ansible_type': 
'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_host': 'localhost', 'ansible_task': 'Install required packages for 
oVirt Engine deployment', 'task_duration': 1}
2022-02-02 20:20:57,917-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:57,985-0700 DEBUG ansible on_any args 
/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/engine_setup/tasks/install_packages.yml
 (args={} vars={}): [localhost]  kwargs 
2022-02-02 20:20:58,969-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Install oVirt Engine package'}
2022-02-02 20:20:58,969-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs 
is_conditional:False 
2022-02-02 20:20:58,970-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs 
2022-02-02 20:21:46,955-0700 DEBUG var changed: host "localhost" var 
"ansible_failed_task" type "" value: "{
"action": "package",
"any_errors_fatal": false,
"args": {
"name": "ovirt-engine",
"state": "present"
},
"async": 0,
"async_val": 0,
"become": false,
"become_exe": null,
"become_flags": null,
"become_method": "sudo",
"become_user": null,
"changed_when": [],
"check_mode": false,
"collections": [
"ovirt.ovirt",
"ansible.builtin"
],
"connection": "local",
"debugger": null,
"delay": 5,
"delegate_facts": null,
"delegate_to": "hyper.hiddendomain.com",
"diff": false,
"environment": [
{}
],
"failed_when": [],
"finalized": true,
"ignore_errors": null,
"ignore_unreachable": null,
"loop": null,
"loop_control": null,
"loop_with": null,
"module_defaults": [],
"name": "Install oVirt Engine package",
"no_log": null,
"notify": null,
"poll": 15,
"port": null,
"register": null,
"remote_user": null,
"retries": 3,
"run_once": null,
"squashed": true,
"tags": [
"bootstrap_local_vm",
"never",
"bootstrap_local_vm",
"never"
],
"throttle": 0,
"until": [],
"uuid": "20040ff4-641c-0f32-a8c8-17e2",
"vars": {},
"when": [
"ovirt_engine_setup_product_type | lower == 'ovirt'"
]
}"
2022-02-02 20:21:46,955-0700 DEBUG var changed: host "localhost" var 
"ansible_failed_result" type "" value: "{
"_ansible_delegated_vars": {
"ansible_admin_users": null,
"ansible_async_dir": null,
"ansible_connection": "smart",
"ansible_control_path": null,
"ansible_control_path_dir": null,
"ansible_delegated_host": "hyper.hiddendomain.com",
"ansible_host": "192.168.1.193",
"ansible_host_key_checking": null,
"ansible_password": null,
   

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Abe E]

The logs are big, not sure if you want more than this:

2022-02-02 20:20:54,043-0700 INFO ansible ok {'status': 'OK', 'ansible_type': 
'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_host': 'localhost', 'ansible_task': 'Gather facts on installed 
packages', 'task_duration': 3}
2022-02-02 20:20:54,043-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:55,020-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Fail when firewall manager is not 
installed'}
2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Fail when firewall manager is not installed  kwargs 
is_conditional:False 
2022-02-02 20:20:55,021-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Fail when firewall manager is not installed  kwargs 
2022-02-02 20:20:55,976-0700 INFO ansible skipped {'status': 'SKIPPED', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'Fail when firewall manager is not installed', 'ansible_host': 
'localhost'}
2022-02-02 20:20:55,977-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:56,953-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Install required packages for oVirt 
Engine deployment'}
2022-02-02 20:20:56,953-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Install required packages for oVirt Engine 
deployment  kwargs is_conditional:False 
2022-02-02 20:20:56,954-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Install required packages for oVirt Engine 
deployment  kwargs 
2022-02-02 20:20:57,916-0700 INFO ansible ok {'status': 'OK', 'ansible_type': 
'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_host': 'localhost', 'ansible_task': 'Install required packages for 
oVirt Engine deployment', 'task_duration': 1}
2022-02-02 20:20:57,917-0700 DEBUG ansible on_any args 
  kwargs 
2022-02-02 20:20:57,985-0700 DEBUG ansible on_any args 
/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/engine_setup/tasks/install_packages.yml
 (args={} vars={}): [localhost]  kwargs 
2022-02-02 20:20:58,969-0700 INFO ansible task start {'status': 'OK', 
'ansible_type': 'task', 'ansible_playbook': 
'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 
'ansible_task': 'ovirt.ovirt.engine_setup : Install oVirt Engine package'}
2022-02-02 20:20:58,969-0700 DEBUG ansible on_any args TASK: 
ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs 
is_conditional:False 
2022-02-02 20:20:58,970-0700 DEBUG ansible on_any args localhost TASK: 
ovirt.ovirt.engine_setup : Install oVirt Engine package  kwargs 
2022-02-02 20:21:46,955-0700 DEBUG var changed: host "localhost" var 
"ansible_failed_task" type "" value: "{
"action": "package",
"any_errors_fatal": false,
"args": {
"name": "ovirt-engine",
"state": "present"
},
"async": 0,
"async_val": 0,
"become": false,
"become_exe": null,
"become_flags": null,
"become_method": "sudo",
"become_user": null,
"changed_when": [],
"check_mode": false,
"collections": [
"ovirt.ovirt",
"ansible.builtin"
],
"connection": "local",
"debugger": null,
"delay": 5,
"delegate_facts": null,
"delegate_to": "hyper.hiddendomain.com",
"diff": false,
"environment": [
{}
],
"failed_when": [],
"finalized": true,
"ignore_errors": null,
"ignore_unreachable": null,
"loop": null,
"loop_control": null,
"loop_with": null,
"module_defaults": [],
"name": "Install oVirt Engine package",
"no_log": null,
"notify": null,
"poll": 15,
"port": null,
"register": null,
"remote_user": null,
"retries": 3,
"run_once": null,
"squashed": true,
"tags": [
"bootstrap_local_vm",
"never",
"bootstrap_local_vm",
"never"
],
"throttle": 0,
"until": [],
"uuid": "20040ff4-641c-0f32-a8c8-17e2",
"vars": {},
"when": [
"ovirt_engine_setup_product_type | lower == 'ovirt'"
]
}"
2022-02-02 20:21:46,955-0700 DEBUG var changed: host "localhost" var 
"ansible_failed_result" type "" value: "{
"_ansible_delegated_vars": {
"ansible_admin_users": null,
"ansible_async_dir": null,
"ansible_connection": "smart",
"ansible_control_path": null,
"ansible_control_path_dir": null,
"ansible_delegated_host": "hyper.hiddendomain.com",
"ansible_host": "192.168.1.193",
"ansible_host_key_checking": 

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Abdul E]

I am still new to this despite my few months of research, I didn't think
you could do that. So you're saying i could have used engine setup on rocky
for example to setup the engine on its own? My issue with that is I am not
sure how it would tie in to my plan for a multi node hyperconverged gluster.

Id have to look into that first to be honest. Sounds promising though, i
been at this a few days but didnt notice it.

Thanks Lev

On Thu., Feb. 3, 2022, 3:26 a.m. Lev Veyde,  wrote:

> Hi Abdul,
>
> And for the separate install have you used the latest oVirt release
> package?
>
> i.e.
> https://resources.ovirt.org/pub/ovirt-4.4/rpm/el8/noarch/ovirt-release44-4.4.10.1-1.el8.noarch.rpm
> ?
>
> If I understand correctly, in all cases you tried the Hosted Engine
> deployment mode, which uses appliance, which unfortunately hasn't been
> updated yet, which may explain the issue you have.
> We're working on releasing an updated appliance right now.
>
> Have you tried to install a separate engine instance?
> I.e. installing a separate VM w/ CentOS Stream/Alma/Rocky and setting up
> the engine through engine-setup ?
>
> Thanks in advance,
>
> On Thu, Feb 3, 2022 at 12:07 PM Abdul E  wrote:
>
>> Ill pass the logs shortly, i tried both, using the Ovirt Node ISO (latest
>> from yesterday) and i even tried a few hours ago to deploy rockylinux and
>> manually install using CLI and the hosted engine deploy script which
>> brought the same error, its specifically ovirt-4gluster-8 that it cannot
>> find mirrors for.
>>
>> On Thu., Feb. 3, 2022, 3:04 a.m. Lev Veyde,  wrote:
>>
>>> Hi Abe,
>>>
>>> Thanks for the update.
>>>
>>> Are you deploying the engine in Hosted-Engine mode or a separate engine
>>> install mode (i.e. using a separate VM for installing the engine) ?
>>>
>>> Also can you please provide the logs?
>>>
>>> Thanks in advance,
>>>
>>> On Thu, Feb 3, 2022 at 12:08 AM Abe E  wrote:
>>>
 Hey Lev, I dont think this update solves the mirror issue on engine
 deployment, seems to error out on gluster mirrors despite the node/host
 servers not throwing any errors for those updated repos.

 I tested using todays 4.4.10-2022020214.el8.iso
 ___
 Users mailing list -- users@ovirt.org
 To unsubscribe send an email to users-le...@ovirt.org
 Privacy Statement: https://www.ovirt.org/privacy-policy.html
 oVirt Code of Conduct:
 https://www.ovirt.org/community/about/community-guidelines/
 List Archives:
 https://lists.ovirt.org/archives/list/users@ovirt.org/message/HDCYX2T7MBBHXJXNVQVKAOOX4OS3Q7E3/

>>>
>>>
>>> --
>>>
>>> Lev Veyde
>>>
>>> Senior Software Engineer, RHCE | RHCVA | MCITP
>>>
>>> Red Hat Israel
>>>
>>> 
>>>
>>> l...@redhat.com | lve...@redhat.com
>>> 
>>> TRIED. TESTED. TRUSTED. 
>>>
>>
>
> --
>
> Lev Veyde
>
> Senior Software Engineer, RHCE | RHCVA | MCITP
>
> Red Hat Israel
>
> 
>
> l...@redhat.com | lve...@redhat.com
> 
> TRIED. TESTED. TRUSTED. 
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ROYX7TDTFMNKGFGYFG4GJPQOLELNRNPY/

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Lev Veyde]

Hi Abdul,

And for the separate install have you used the latest oVirt release package?

i.e.
https://resources.ovirt.org/pub/ovirt-4.4/rpm/el8/noarch/ovirt-release44-4.4.10.1-1.el8.noarch.rpm
?

If I understand correctly, in all cases you tried the Hosted Engine
deployment mode, which uses appliance, which unfortunately hasn't been
updated yet, which may explain the issue you have.
We're working on releasing an updated appliance right now.

Have you tried to install a separate engine instance?
I.e. installing a separate VM w/ CentOS Stream/Alma/Rocky and setting up
the engine through engine-setup ?

Thanks in advance,

On Thu, Feb 3, 2022 at 12:07 PM Abdul E  wrote:

> Ill pass the logs shortly, i tried both, using the Ovirt Node ISO (latest
> from yesterday) and i even tried a few hours ago to deploy rockylinux and
> manually install using CLI and the hosted engine deploy script which
> brought the same error, its specifically ovirt-4gluster-8 that it cannot
> find mirrors for.
>
> On Thu., Feb. 3, 2022, 3:04 a.m. Lev Veyde,  wrote:
>
>> Hi Abe,
>>
>> Thanks for the update.
>>
>> Are you deploying the engine in Hosted-Engine mode or a separate engine
>> install mode (i.e. using a separate VM for installing the engine) ?
>>
>> Also can you please provide the logs?
>>
>> Thanks in advance,
>>
>> On Thu, Feb 3, 2022 at 12:08 AM Abe E  wrote:
>>
>>> Hey Lev, I dont think this update solves the mirror issue on engine
>>> deployment, seems to error out on gluster mirrors despite the node/host
>>> servers not throwing any errors for those updated repos.
>>>
>>> I tested using todays 4.4.10-2022020214.el8.iso
>>> ___
>>> Users mailing list -- users@ovirt.org
>>> To unsubscribe send an email to users-le...@ovirt.org
>>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>>> oVirt Code of Conduct:
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HDCYX2T7MBBHXJXNVQVKAOOX4OS3Q7E3/
>>>
>>
>>
>> --
>>
>> Lev Veyde
>>
>> Senior Software Engineer, RHCE | RHCVA | MCITP
>>
>> Red Hat Israel
>>
>> 
>>
>> l...@redhat.com | lve...@redhat.com
>> 
>> TRIED. TESTED. TRUSTED. 
>>
>

-- 

Lev Veyde

Senior Software Engineer, RHCE | RHCVA | MCITP

Red Hat Israel



l...@redhat.com | lve...@redhat.com

TRIED. TESTED. TRUSTED. 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/THVKF7NHN75NU7TX2HSFHQZEC5ROJQC4/

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Abdul E]

Ill pass the logs shortly, i tried both, using the Ovirt Node ISO (latest
from yesterday) and i even tried a few hours ago to deploy rockylinux and
manually install using CLI and the hosted engine deploy script which
brought the same error, its specifically ovirt-4gluster-8 that it cannot
find mirrors for.

On Thu., Feb. 3, 2022, 3:04 a.m. Lev Veyde,  wrote:

> Hi Abe,
>
> Thanks for the update.
>
> Are you deploying the engine in Hosted-Engine mode or a separate engine
> install mode (i.e. using a separate VM for installing the engine) ?
>
> Also can you please provide the logs?
>
> Thanks in advance,
>
> On Thu, Feb 3, 2022 at 12:08 AM Abe E  wrote:
>
>> Hey Lev, I dont think this update solves the mirror issue on engine
>> deployment, seems to error out on gluster mirrors despite the node/host
>> servers not throwing any errors for those updated repos.
>>
>> I tested using todays 4.4.10-2022020214.el8.iso
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HDCYX2T7MBBHXJXNVQVKAOOX4OS3Q7E3/
>>
>
>
> --
>
> Lev Veyde
>
> Senior Software Engineer, RHCE | RHCVA | MCITP
>
> Red Hat Israel
>
> 
>
> l...@redhat.com | lve...@redhat.com
> 
> TRIED. TESTED. TRUSTED. 
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/CAAWAKVGTRBI3U54324IGTMEMLSKTLWL/

[ovirt-users] Re: [ANN] oVirt Node 4.4.10.1 Async update

[Lev Veyde]

Hi Abe,

Thanks for the update.

Are you deploying the engine in Hosted-Engine mode or a separate engine
install mode (i.e. using a separate VM for installing the engine) ?

Also can you please provide the logs?

Thanks in advance,

On Thu, Feb 3, 2022 at 12:08 AM Abe E  wrote:

> Hey Lev, I dont think this update solves the mirror issue on engine
> deployment, seems to error out on gluster mirrors despite the node/host
> servers not throwing any errors for those updated repos.
>
> I tested using todays 4.4.10-2022020214.el8.iso
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HDCYX2T7MBBHXJXNVQVKAOOX4OS3Q7E3/
>


-- 

Lev Veyde

Senior Software Engineer, RHCE | RHCVA | MCITP

Red Hat Israel



l...@redhat.com | lve...@redhat.com

TRIED. TESTED. TRUSTED. 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AXFZOSIVI5425BNUJ7773I7KBNQ3577X/

[ovirt-users] Re: how to search event not matching a user

[Eli Mesika]

On Mon, Jan 31, 2022 at 7:51 PM Martin Perina  wrote:

>
>
> On Mon, Jan 31, 2022 at 2:00 PM Gianluca Cecchi 
> wrote:
>
>> Hello,
>> every event in Advanced view has a field "User".
>> I'm trying to compose a search in web admin of events with user different
>> from myuser@internal
>> It seems I'm not able to get what I want.
>>
>
Verified , please open a BZ on that and assign to me

>
>> I also tried to base attempts on an old 2019 thread (on 4.3.6) where this
>> queries worked:
>>
>> Disks: name=engine* or name=host*
>>
>
As far as I see you can search for the name but you don't know what to
search since only the alias is exposed in th list, so I am not sure what is
the meaning of searching on something we don't display , I would remove the
option to search by name



> Disks: alias=engine* or alias=host*
>>
>>
>>
This is working as expected for me



>
>> but now on 4.4.8 gives nothing even if matched.
>> Any hint and also documentation reference about the correct syntax to use
>> in 4.4.x?
>>
>
> Eli, could you please take a look?
>
>>
>> Thanks,
>> Gianluca
>>
>>
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HIEPT4HR7AUP5TKBUPOVLI6IPAZIECS2/
>>
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GIYUKBDHTQT6KIKUK6QTWGXZBLO2AXJM/

[ovirt-users] Re: Ignore CPU_TYPE_UNSUPPORTED_IN_THIS_CLUSTER_VERSION ?

[Richard W.M. Jones]

On Thu, Feb 03, 2022 at 06:08:55AM +, Strahil Nikolov wrote:
> Host-passthrough & nested virtualization are mandatory.

Yes indeed.  I don't know if I missed this in the docs, but it wasn't
obvious.  However using host-passthrough fixed it.

Rich.

> Best Regards,
> Strahil Nikolov
> 
> 
> On Wed, Feb 2, 2022 at 18:54, Richard W.M. Jones
>  wrote:
> On Wed, Feb 02, 2022 at 05:42:33PM +0200, Juhani Rautiainen wrote:
> > Hi!
> >
> > Maybe you have to modify qemu VM CPU settings? I mean that usually if
> > you don't see the svm flag on AMD CPU, virtualization is not
> > available. This page suggests changes to qemu CPU model:
> > https://techviewleo.com/how-to-enable-nested-virtualization-on-kvm-qemu/
> >
> > I think that the "host-passthrough" setting should let all the CPU
> > flags go through to the VM
> > (https://wiki.openstack.org/wiki/LibvirtXMLCPUModel).
> 
> Yes, thank you, you are absolutely right.
> 
> I had the CPU model set to "host-model" (where libvirt tries to create
> a model approximating the host).  Changing it to "host-passthrough"
> (ie. same as qemu -cpu host) fixed it and allowed me to install oVirt
> node in the guest and activate it.
> 
> Rich.
> 
> --
> Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/
> ~rjones
> Read my programming and virtualization blog: http://rwmj.wordpress.com
> virt-df lists disk usage of guests without needing to install any
> software inside the virtual machine.  Supports Linux and Windows.
> http://people.redhat.com/~rjones/virt-df/
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: https://www.ovirt.org/community/about/
> community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/
> W4434OIVOGS2KCGVISROD6Y7JPLP6MNS/
>
> 

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/FIR2NPU2FVCNMXVJSEJ27I3ONPVWTB7K/