We ran in to this issue as well when trying to install Ovirt Hyperconverged.
The root issue is that kmod-kvdo in Centos 8 (and probably upstream) is
built for a specific kernel and if you don't run that kernel it is not
found. This is a major issue even if you match the kernel version then
if
:
On Thu, Sep 3, 2020 at 12:21 PM Sverker Abrahamsson
mailto:sver...@abrahamsson.com>> wrote:
Hi Ales,
right now I have a manually created ovirtmgmt bridge (virbr0 and
vnet0 seems to be created during the failed attempt to deploy
hosted engine):
[root@h1-mgmt ~]# nmcli co
4:
enabled: false
ipv6:
enabled: false
mtu: 65536
- name: ovs-system
type: unknown
state: down
ipv4:
enabled: false
ipv6:
enabled: false
mac-address: A2:35:7A:6C:B7:EF
mtu: 1500
/Sverker
Den 2020-09-03 kl. 11:54, skrev Ales Musil:
On Thu, Sep 3, 2020 at 11:51 AM
possible to change.
/Sverker
Den 2020-09-03 kl. 10:52, skrev Dominik Holler:
On Wed, Sep 2, 2020 at 10:38 PM Sverker Abrahamsson via Users
mailto:users@ovirt.org>> wrote:
Well, unforturnatly I don't have a choise since it is out of my
control.
I only have one physic
hat is you switch brand & model ?
Maybe someone more experienced in networking can help.
Best Regards,
Strahil Nikolov
В сряда, 2 септември 2020 г., 23:39:57 Гринуич+3, Sverker Abrahamsson via Users
написа:
Well, unforturnatly I don't have a choise since it is out of my contr
2 септември 2020 г., 20:41:57 Гринуич+3, Sverker Abrahamsson via Users
написа:
Pretty formatting the "desired state" it seems that vdsm tries to remove
the ip of my underlying interface, that is enp4s0:
{
'interfaces': [{
'name':
Was it ever solved to install hosted engine with ovn? I tried a few
years ago, got it almost to work but then gave up.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.o
roadcast 172.27.1.255
inet6 fe80::62a4:4cff:fee9:4ac prefixlen 64 scopeid 0x20
ether 60:a4:4c:e9:04:ac txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13 bytes 938 (938.0 B)
TX errors
Hi,
I'm attempting to install hosted engine but getting this failure:
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The
host has been set in non_operational status, deployment errors: code
505: Host h1-mgmt.limetransit.com installation failed. Failed to
configure manage
In my setup the reason why I attempted to use OVS/OVN is that I
(currently) have two hosts in a data center (Hetzner) which does not
have a common subnet. Each of these hosts have one public IPv4 address.
Because of that I want the ovirt networks to be on private ip ranges and
they do not corr
Hi Jonathan,
it seems somewhat similar to what I've been struggeling with. I've
worked around it with a hook script until someone can explain from where
it should discover that the interface should be created on an ovs
bridge. Look at the thread with topic "hosted engine with openvswitch".
/S
osted
engine up, but resyncing host network from engine side makes it loose
the connection.
/Sverker
Den 2018-05-14 kl. 10:12, skrev Sverker Abrahamsson:
Apparently the logs were too big for the mailing list, but should have
been received by Petr and Dominik. Let me know if not.
What it boils do
interface element in xml sent to libvirt is similar so I
think an understanding of where it comes from is necessary to
troubleshoot that (if needed).
/Sverker
Den 2018-05-13 kl. 00:23, skrev Sverker Abrahamsson:
Sure, they are attached. The attempt to start the hosted engine vm
occurs at 14:29
Hi Dominik
Den 2018-05-10 kl. 22:08, skrev Dominik Holler:
On Thu, 10 May 2018 19:15:07 +0200
Sverker Abrahamsson wrote:
Hi
I have a problem with running hosted engine with openvswitch. I have
Which version of oVirt?
Ovirt version is 4.2.3.5, vdsm version 4.20.27
How do you configured
Hi
I have a problem with running hosted engine with openvswitch. I have one
cluster where the ovirt engine runs on the host, there it works and when
starting a vm the interface definition looks like this:
slot="0x03" type="pci" />
le to
set up a consistent naming from the virtual bios.
If it matters the switch type used is OVS.
/Sverker
Den 2018-03-26 kl. 13:41, skrev Sverker Abrahamsson:
I have a number of vm's running under Ovirt 4.2, most are CentOS 7 and
one Debian. Issue is that when multiple network interfaces are
I have a number of vm's running under Ovirt 4.2, most are CentOS 7 and
one Debian. Issue is that when multiple network interfaces are assigned
they don't persist but it variates at boot which interface will be which.
I've tried various methods, setting UUID and HWADDRESS in the ifcfg file
and
Since upgrading my test lab to ovirt 4.2 I can't get ovirt-provider-ovn
to work. From ovirt-provider-ovn.log:
2017-11-14 00:40:15,795 Request: POST : /v2.0///tokens
2017-11-14 00:40:15,795 Request body:
{
"auth" : {
"passwordCredentials" : {
"username" : "admin@internal",
"
"/root"
vm_guid| run_on_vds
--+
4e4df6ea-ea01-465b-9424-4436aa24cec0 |
(1 row)
/Sverker
Den 2017-04-28 kl. 10:32, skrev Simone Tiraboschi:
On Thu, Apr 27, 2017 at 9:27 PM, Sverker Abrahamsson
mailto:s
Hi
I upgraded an old ovirt installation from 3.5 to latest version, but end
up with this error message when running engine-setup:
[ INFO ] Stage: Setup validation
[ ERROR ] It seems that you are running your engine inside of the
hosted-engine VM and are not in "Global Maintenance" mode. In th
I've followed the instructions to best effort, so hopefully it's right..
Den 2017-01-13 kl. 10:31, skrev Marcin Mirecki:
Please push the patch into: https://gerrit.ovirt.org/ovirt-provider-ovn
(let me know if you need some directions)
- Original Message -
From: "Sver
Sverker
Den 2017-01-09 kl. 10:41, skrev Sverker Abrahamsson:
This is the content of vdsm.log on h1 at this time:
2017-01-06 20:54:12,636 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC
call VM.create succeeded in 0.01 seconds (__init__:515)
2017-01-06 20:54:12,636 INFO (vm/6dd5291e) [virt.vm]
(v
3-a583-d476fa3a370d': {'code': 0, 'actual': True,
'version': 0, 'acquired': True, 'delay': '0.000960248', 'lastCheck':
'2.1', 'valid': True}} (logUtils:52)
2017-01-06 20:54:24,924 INFO (jsonrpc/0) [jsonrpc.Js
dccb59a
addresses: ["00:1a:4a:16:01:54"]
port 92f6d3c8-68b3-4986-9c09-60bee04644b5
addresses: ["00:1a:4a:16:01:52"]
port ovirtbridge-port2
addresses: ["unknown"]
port ovirtbridge-port1
addresses: [&
873"
Port_Binding "ovirtbridge-port1"
Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"
hostname: "h1.limetransit.com"
Encap geneve
ip: "144.76.84.73"
options: {csum="true"}
Port_Binding "ovirtbridge-port2"
rt2"
Port_Binding "92f6d3c8-68b3-4986-9c09-60bee04644b5"
I don't know from where the faulty id comes from, it's not in any logs.
In the domain xml as printed in vdsm.log the id is correct:
from that it seems the second host works, although I need to
resolve the traffic issue over the OVS tunnel.
/Sverker
Den 2017-01-02 kl. 01:13, skrev Sverker Abrahamsson:
1. That is not possible as ovirt (or vdsm) will rewrite the network
configuration to a non-working state. That is why I've
-ovn/
You can get the latest rpms from here:
http://resources.ovirt.org/repos/ovirt/experimental/master/ovirt-provider-ovn_fc24_46/rpm/fc24/noarch/
- Original Message -
From: "Sverker Abrahamsson"
To: "Marcin Mirecki"
Cc: "Ovirt Users"
Sent: Friday, December 30, 201
-int bridge.
Marcin
- Original Message -----
From: "Sverker Abrahamsson"
To: "Marcin Mirecki"
Cc: "Ovirt Users"
Sent: Friday, December 30, 2016 12:15:43 PM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory ovirtmgmt network
Hi
That is the logic I quite
setup in your case would probably be to create br-int and connect
this to your ovirtbridge, although I don't know the details of your env, so
this is just my best guess.
Marcin
- Original Message -
From: "Sverker Abrahamsson"
To: "Marcin Mirecki"
Cc: "Ov
port there + testcode of some variants
/Sverker
Den 2016-12-29 kl. 22:55, skrev Sverker Abrahamsson:
When I change
/usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
to instead of hardcoded to br-int use BRIDGE_NAME = 'ovirtbridge' then
I get the expected behavi
-29 kl. 22:07, skrev Sverker Abrahamsson:
By default the vNic profile of my OVN bridge ovirtbridge gets a
Network filter named vdsm-no-mac-spoofing. If I instead set No filter
then I don't get those ebtables / iptables messages. It seems that
there is some issue between ovirt/vdsm and fire
r now.
It is not clear for me why the port is added on br-int instead of the
bridge I've assigned to the VM, which is ovirtbridge??
/Sverker
Den 2016-12-29 kl. 14:20, skrev Sverker Abrahamsson:
The specific command most likely fails because there is no chain named
libvirt-J-vnet0, but w
tool[3736]: EnvironmentError:
Failed to restore the persisted networks
So I remove the nameservers section as well. At first I could not get it
to work, as vdsm-network would find the backup file
/var/lib/vdsm/persistence/netconf/nets/ovirtmgmt~ but after removing
that it worked fine.
Not s
-0500 (EST)
Från: Marcin Mirecki
Till: Sverker Abrahamsson
Kopia: Ovirt Users , Lance Richardson
, Numan Siddique
Let me add the OVN team.
Lance, Numan,
Can you please look at this?
Trying to plug a vNIC results in:
>>>>>> Dec 28 23:31:35 h2 ovs-vsctl: ovs|1|vs
setting configuring the OVN-controller?
Marcin
- Original Message -
From: "Sverker Abrahamsson"
To: "Marcin Mirecki"
Cc: "Ovirt Users"
Sent: Thursday, December 29, 2016 11:44:32 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory ovirtmgmt ne
connect to the
OVN north? You can do it using "vdsm-tool ovn-config" or
using the OVN tools directly.
Please check out: https://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/
for details.
Also please note that the OVN provider is completely different
from the neutron-openvswitch plugin. Please
From
/usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
(installed by ovirt-provider-ovn-driver rpm):
BRIDGE_NAME = 'br-int'
Den 2016-12-28 kl. 23:56, skrev Sverker Abrahamsson:
Googling on the message about br-int suggested adding that bridge to ovs:
ovs-vsctl
pe: internal
Bridge "ovsbridge0"
Port "ovsbridge0"
Interface "ovsbridge0"
type: internal
Port "eth0"
Interface "eth0"
Bridge br-int
Port br-int
Interface br-int
In addition I had to add an alias to modprobe:
[root@h2 modprobe.d]# cat dummy.conf
alias dummy0 dummy
Den 2016-12-28 kl. 23:03, skrev Sverker Abrahamsson:
Hi
I first tried to set device name to dummy_0, but then ifup did not
succeed in creating the device unless I first did 'ip lin
ou should be able to use it for
the setup.
Marcin
- Original Message -
From: "Marcin Mirecki"
To: "Sverker Abrahamsson"
Cc: "Ovirt Users"
Sent: Wednesday, December 28, 2016 12:06:26 PM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory ovirtm
f it works).
Please give me some time to look for a solution.
- Original Message -
From: "Sverker Abrahamsson"
To: "Marcin Mirecki"
Cc: "Ovirt Users"
Sent: Wednesday, December 28, 2016 11:48:24 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory ovir
ment network.
The OVN provider can only handle external networks, which can not be used for a
management network.
Marcin
- Original Message -----
From: "Sverker Abrahamsson"
To: users@ovirt.org
Sent: Wednesday, December 28, 2016 12:39:59 AM
Subject: [ovirt-users] Issue with OVN/O
Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9)
7692306 8272306 Email: yd...@redhat.com <mailto:yd...@redhat.com> IRC
: ydary
On Wed, Dec 28, 2016 at 1:39 AM, Sverker Abrahamsson
mailto:sver...@abrahamsson.com>> wrote:
Hi
For long time I've been look
Hi
For long time I've been looking for proper support in ovirt for Open
vSwitch so I'm happy that it is moving in the right direction. However,
there seems to still be a dependency on a ovirtmgmt bridge and I'm
unable to move that to the OVN provider.
The hosting center where I rent hw instan
ld be changed.
How can I accomplish that?
/Sverker
On 2016-04-13 14:50, Dan Kenigsberg wrote:
On Mon, Apr 11, 2016 at 01:24:51PM +0200, Sverker Abrahamsson wrote:
Hi
My usecase is that I am setting up a lab to emulate a customers production
environment which has multiple vlans. As this
Hi
My usecase is that I am setting up a lab to emulate a customers
production environment which has multiple vlans. As this is done in a
hosting environment where I don't have any control over the switches,
I've created virtual switches with OpenVSwitch which connects together a
couple of phys
Has anybody succeeded in installing Ovirt 3.6 with hosted engine on a
server which uses OpenVSwitch for the network config?
I believe my issue is that Ovirt wants to control the network to create
a bridge for its management and I wants it to just use whatever network
is available on the host w
48 matches
Mail list logo