On 10/10/19 10:44 AM, Gianluca Cecchi wrote:
On Thu, Oct 10, 2019 at 9:56 AM Francesco Romani <mailto:from...@redhat.com>> wrote:
The only way Vdsm will not pause the VM is if libvirt+qemu never
reports any ioerror, which is something I'm not sure is possible
and
which is something I'm not sure is possible and that I'd
never recommend anyway.
Vdsm always tries hard to be super-careful with respect possible data
corruption.
Bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fro
because if Vdsm can't be sure, the only real option is to let
the sysadmin check and decide.
Bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mailing list -- users@ovirt.org
To
vm
with custom pre-start hooks) I need some python know-how.
Hi,
You may find this patch useful: https://gerrit.ovirt.org/#/c/91499/
it is mostly untested, but should be a good starting point.
HTH,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani githu
ver gained traction. The code is still
there, but it is pretty much unsupported and it is going to be removed
in future releases.
Bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mail
starting
2018-07-18 06:07:30,658 - mom - INFO - MOM starting
And I totally not expect this. Martin, Andrej, is this the expected
behaviour?
Bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
U
0058, vmId=a1af259b-7917-49ac-8bcc-eb4cc302e723 (api:52)
2018-07-18 06:07:22,912+0100 INFO (jsonrpc/4) [jsonrpc.JsonRpcServer]
RPC call VM.getStats failed (error 1) in 0.00 seconds (__init__:573)
2018-07-18 06:07:23,043+0100 INFO (jsonrpc/6) [root]
/usr/libexec/vdsm/hooks/after_get_caps/50_ope
error?
Thanks,
+++
[1] It seems to me that a NIC card was removed from a VM during a
statistic reporting cycle, or somehow failed to report stats. But
really, is a wild guess.Let's look at the logs first.
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fro
il to start:
VM OPNsense is down with error. Exit message: Unable to add bridge ovirtmgmt
port vnet0: Operation not supported.
Hi,
could you please share the Vdsm and Engine logs?
Thanks,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @
(warning: NOT tested on real hw or with
real VMs)
https://gerrit.ovirt.org/91499
bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
gt;
> The issue with the nics MTU appears to have gone away with the upgrade
> of host to the version above.
Nice to know!
If the MTU issue reappears, please file a bug
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
27;: No such device
This is another bug, related to
https://bugzilla.redhat.com/show_bug.cgi?id=1561010.
The proper fix is on Engine side, even though we can fix it on Vdsm side too
Bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
(hooks:110)
2018-05-17 10:11:12,837+0100 INFO (vm/1bc9dae8) [root]
/usr/libexec/vdsm/hooks/before_vm_start/50_vfio_mdev: rc=1 err=vgpu: No device
with type nvidia-53 is available.
maybe Martin can shed some light here?
Callum, please share Vdsm logs showing the network failure
Bests,
--
F
Hi again,
On 05/18/2018 11:55 AM, Francesco Romani wrote:
> Hi,
>
>
> On 05/17/2018 02:58 PM, Ernest Beinrohr wrote:
>> Hi, I updated my engine and 1 host to 4.2 from 4.1 and now I cannot
>> start a VM and get this error:
>>
>> "UnsupportedType: Unsuppo
he new 4.2
> engine.
Please file a bug about this, make sure to report the error below.
>
>
> My VM has this inside: total_bytes_sec="0" total_iops_sec="0" write_bytes_sec="0"
> write_iops_sec="100"/>
Where is this exactly?
bests
CSI-based.
This is pretty frequent on your vdsm logs and alarming:
VolumeGroupSizeError: Volume Group not big enough: ('Not enough free
extents for extending LV
f3bb30a0-4745-4c77-aaca-e5f385905c1e/5c1ad23a-e418-4bb2-86b7-af4b14079224
(free=6, needed=8)',)
The fix depends on how you set up
,
you may have hit this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1542117
it could affect all VMs started with Engine <= 4.1 and later imported in
4.2, or Hosted Engine.
If your VM was first created under oVirt 4.2, please file a new bug.
HTH,
--
Francesco Romani
Senior SW Eng., Virtuali
--
> FreeMail powered by mail.fr <https://mail.fr>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanir
error will prevent the VM to start. Now, we need to see why it
happens in the first place. Will look at the vdsm logs as soon as possible.
Bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Thahk You!
>> Have a nice day!
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
> --
> Nathanaël Blanchet
>
> Supervision réseau
> Pôle Infrastrutures Informatiques
> 227 avenue Professeur-Jean-Louis-Viala
> 34193 MONTPELLIER CEDEX 5
> Tél. 33 (0)4 67 54 84 55
> Fax 33 (0)4 67 54 84 14
> blanc...@abes.fr
>
>
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
. Please file a bug[1] against qemu
+++
[1] As usual, it is advised to check on bugzilla first of the same issue
was already reporte
Bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
f the stack.
We may learn something helpful from the libvirt logs, since you already
have it could be worth looking at them.
So if you want to share them, I'll have a look.
--
Francesco Romani
Senior SW Eng., Virtualization R&D
Red Hat
IRC: fromani github: @fromanirh
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
libvirt-daemon-config-nwfilter-2.0.0-10.el7_3.4.x86_64
>>> libvirt-daemon-driver-interface-2.0.0-10.el7_3.4.x86_64
>>> libvirt-daemon-driver-network-2.0.0-10.el7_3.4.x86_64
>>> libvirt-daemon-driver-nodedev-2.0.0-10.el7_3.4.x86_64
>>> libvirt-daemon-driver-nwfilt
tigate, we need
more data; so could you please share:
1. the domain XML (virtsh -r dumpxml ...) and/or the qemu command line
of the affected VM, on the source side
2. the version of QEMU and libvirt that you are running
Thanks and bests,
--
Francesco Romani
Senior SW Eng., Virtualization R&D
quot;1970-01-01T00:00:01" port="-1" tlsPort="-1" type="spice">
> (ports with "-"? maybe it is fine because of autoport settings...)
>
Yes, "-1" means "autoallocation from libvirt".
I don't see obvious issues in this XML, and,
[org.ovirt.engine.core.services.VMConsoleProxyServlet] (default
> task-25) [5d9b7d18] Error processing request: :
> java.lang.RuntimeException: Unable to create session using LoginOnBehalf
>
This smells like one engine internal bug. Please make sure to file one
bugzilla entry.
Bests,
--
Fr
lease enable at client side
> $
The error message is a bit cryptic. It means you haven't given the "-t"
ssh options.
Please retry with:
ssh -t -i .ssh/id_dsa.pub ovirt-vmconsole@ovmgr1 -p connect
--vm-name c7service
> What is "clien
kely, case is a QEMu bug. If QEMU cannot
correctly restore the VM state from the migration
data stream, you'll get the same error.
Anyway, this definitely looks like libvirt/qemu issue; better be
prepared to file a libvirt bug.
does it happen migrating to *any* CentOS7.3 box?
Bests,
--
Franc
ecover)
> vmId=`4f627cc1-9b52-4eef-bf3a-c02e8a6303b8`::operation failed:
> migration job: unexpectedly failed
This is surprising (no pun intended)
With a pretty high chance this comes from libvirt, I'm afraid you need
to dig in the libvirt logs/journal entries to learn more.
Vdsm cou
: 不支持的参数:migration URI is not supported by tunnelled migration
>
> So, i want to know how should i enable the tunnel migration feature.
> Can anyone help me?
> Thanks
>
> Regards.
>
> --------
> like...@cs2c.com.cn
>
>
ld i enable the tunnel migration feature.
> Can anyone help me?
> Thanks
>
> Regards.
>
> --------
> like...@cs2c.com.cn
>
>
> ___
> Users mailing list
> Users@
found when the two sides of
the migration have different and incompatible version of QEMU.
In turn, this is quite often a bug, because forward migrations (e.g.
from 2.3.0 to 2.4.0) are always supported, for obvious upgrade needs.
So, which version of libvirt and qemu do you have on the sides of
f
ate this setting for 4.2.0, and, perhaps, later
4.1.z, but for 4.1.0 this is still valid.
In terms of Vm configuration, the console device should have the
"consoleType" = "serial" setting.
This is the default Engine sends.
Not sure what HE is do
Hi all,
In case you missed it, oVirt 4.1.0 gained some support to run container
side to side to VMs.
Read the full story here:
https://fromanirh.github.io/containers-in-ovirt.html
I'll be happy to answer any question - make sure to CC me to have a
faster response time!
Bests,
--
Fran
tings and enable RNG
> Device. Then machine boots up.
> I think there is a migration step missing from /dev/random to
> /dev/urandom for exisiting VM's.
>
Hi!
Sorry about this trouble. Please file a bug about this, we will likely
need some Vdsm + Engine fixes.
Bests,
--
Francesco
- Original Message -
> From: "Simone Tiraboschi"
> To: "Steve Dainard" , "Francesco Romani"
>
> Cc: "users"
> Sent: Friday, October 14, 2016 9:59:49 AM
> Subject: Re: [ovirt-users] Ovirt Hypervisor vdsm.Scheduler logs fill par
d yet is any Engine change. This is a Vdsm-only
change at the
moment, so fixing the following is currently unplanned:
* First and foremost, Engine will not distinguish between real VMs and
container VMs.
Actions unavailable to container will not be hidden from UI. Same for
monitoring
hot attached?
Perhaps this page could help
https://www.ovirt.org/develop/release-management/features/storage/backup-restore-api-integration/
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
isor?
Seems like Vdsm doesn't like your changes, perhaps it cannot just identify the
interface configuration
Edward, do you have any recommendations about this flow?
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
or the updated packages to come; unfortunately,
this may
require a long cycle, since those packages are most often provided by your
distribution.
HTH,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
- Original Message -
> From: "Sandro Bonazzola"
> To: "Gianluca Cecchi" , "Michal Skrivanek"
> , "Francesco Romani"
>
> Cc: "users"
> Sent: Friday, August 12, 2016 2:01:54 PM
> Subject: Re: [ovirt-users] oVirt
ll be called cycle?
This should be caused by the MOM daemon, which periodically checks the
availability
of Vdsm.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
r seem
> filled by vdsm messages
Ciao Gianluca,
please try the following:
1. edit /etc/vdsm/vdsm.conf
2. in the [devel] section, set "python_warnings_enable=false"
it should read like
[devel]
python_warnings_enable = false
3. changes will take place after a Vdsm restart
HTH,
isable/remove default video qxl?
> thanks,
> Arman,.
Hi,
The 4.0 Vdsm allows you to run a headless VM, meaning a VM without graphic
device/frontend.
Not sure Engine allows you that however. I'm afraid you will need to write a
Vdsm hook.
There could be simpler solutions depending o
- Original Message -
> From: "Nir Soffer"
> To: "Fernando Fuentes"
> Cc: "Francesco Romani" , "users"
> Sent: Saturday, July 2, 2016 11:18:01 AM
> Subject: Re: [ovirt-users] disk not bootable
>
> On Sat, Jul 2, 2016 at
a serial console, just use console=ttyS0 on the kernel
command line, and systemd will automatically start a getty on it for you.
"""
nice full tutorial on http://0pointer.de/blog/projects/serial-console.html
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
- Original Message -
> From: "Nathanaël Blanchet"
> To: "Francesco Romani"
> Cc: users@ovirt.org
> Sent: Friday, April 22, 2016 1:34:59 PM
> Subject: Re: [ovirt-users] ssh -t serial connection on Widows
>
> Thank you for your answer.
>
>
ham/putty/0.60/htmldoc/Chapter4.html#config-ssh-pty
> As the spice/vnc console, could it be a good idea to get the same on the
> UI so as to be OS independant?
Sorry, I don't understand this question. Could you please rephrase it?
Bests,
--
Francesco Romani
RedHat Engine
#x27;source'):
> if source.getAttribute('file').find('/payload/') > 0:
> for serial in disk.getElementsByTagName('serial'):
> if not serial.hasChildNodes():
> serial.appendChild(domxml.createTextNode(str(uuid.uuid4(
> hooking.write_domxml(domx
unit, so
# systemctl status ovirt-vmconsole-proxy-sshd
and
# systemctl start ovirt-vmconsole-proxy-sshd
If you want it at every boot (most likely yes)
# systemctl enable ovirt-vmconsole-proxy-sshd
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: froma
- Original Message -
> From: "Yedidyah Bar David"
> To: "Christophe TREFOIS" , "Francesco Romani"
>
> Cc: "Fabrice Bacchella" , "users"
>
> Sent: Thursday, March 31, 2016 8:00:04 AM
> Subject: Re: [ovirt-use
zation Host.
Once the VM is booted, Vdsm should report the port allocated by libvirt to
Engine.
Does this happen consistently or just sporadically? Which version of packages
are you using?
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: from
- Original Message -
> From: "Fabrice Bacchella"
> To: "Francesco Romani"
> Cc: "Yedidyah Bar David" , "users"
> Sent: Wednesday, March 23, 2016 4:29:15 PM
> Subject: Re: [ovirt-users] seria consol setup
>
> I'm tryi
- Original Message -
> From: "Fabrice Bacchella"
> To: "Francesco Romani"
> Cc: "Yedidyah Bar David" , "users"
> Sent: Wednesday, March 23, 2016 1:21:11 PM
> Subject: Re: [ovirt-users] seria consol setup
>
- Original Message -
> From: "Yedidyah Bar David"
> To: "Fabrice Bacchella" , "Francesco Romani"
>
> Cc: "users"
> Sent: Wednesday, March 23, 2016 12:28:52 PM
> Subject: Re: [ovirt-users] seria consol setup
> > I can al
- Original Message -
> From: "Francesco Romani"
> To: "Budur Nagaraju"
> Cc: "users"
> Sent: Monday, February 8, 2016 11:43:49 AM
> Subject: Re: [ovirt-users] Logs Error
>
> - Original Message -
> > From: "Budur Nag
ared to file a oVirt bug, on Engine, because Vdsm is just the
humble
servant here, doing exactly what Engine orders.
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
- Original Message -
> From: "Budur Nagaraju"
> To: "users"
> Sent: Monday, February 8, 2016 10:00:36 AM
> Subject: [ovirt-users] Logs Error
>
>
>
> Getting below logs for some reason, in the engine
Hi!
Can please file a bug about it?
Than
gt; HI
>
> can someone pls update the default vm console ports which needs to be open in
> firewall ?
>
> Regards,
> Nagaraju
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listi
- Original Message -
> From: "wodel youchi"
> To: "Francesco Romani"
> Cc: "Simone Tiraboschi" , "users" ,
> "Roy Golan"
> Sent: Monday, September 7, 2015 5:45:17 PM
> Subject: Re: [ovirt-users] Ovirt 3.6 Beta test
- Original Message -
> From: "Simone Tiraboschi"
> To: "wodel youchi"
> Cc: "users" , "Roy Golan" , "Francesco
> Romani"
> Sent: Monday, September 7, 2015 4:55:41 PM
> Subject: Re: [ovirt-users] Ovirt 3.6 Beta te
s@ovirt.org/msg24878.html
>
> I'm also being disturb by this ennoyance.
> Is there a workaround?
>
> (oVirt 3.5.1, CentOS 7 hosts, iSCSI storage)
This message should have been removed in recent VDSM versions.
Which version of VDSM and libvirt are you running?
Bests,
--
Fr
- Original Message -
> From: "Michal Skrivanek"
> To: "Francesco Romani"
> Cc: "Wolfgang Bucher" , "users@ovirt.org
> (users@ovirt.org)"
> Sent: Tuesday, May 5, 2015 9:33:03 AM
> Subject: Re: [ovirt-users] ovirt 3.5.2 cannot
> May 4 19:08:23 ovirt libvirtd: 9183: warning :
> virSecuritySELinuxRestoreSecurityFileLabel:1034 : cannot lookup default
> selinux label for
> /rhev/data-center/d5e8a32f-35ed-4dec-bf9d-3c818c2780a4/66f8876c-0898-4ff2-9325-a14835f2a872/images/b329d34e-78b3-46a5-9df8-00b83c2c982a/c79a596b-
e need more context from vdsm.log and from
supervdsm.log.
Thanks,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
- Original Message -
> From: "Sandro Bonazzola"
> To: "Eli Mesika" , "Ido Barkan" ,
> "Adam Litke" ,
> "Francesco Romani" , "Maor Lipchuk"
> , "Vered Volansky"
> , "Eli Mesika" , U
here ===
# Skips check since rhel default repos lack pep8 and pyflakes
%if ! 0%{?rhel}
%{!?with_check:%global with_check 1}
%else
%{!?with_check:%global with_check 0}
%endif
=== cut here ===
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
ity ept vpid
> fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm xsaveopt
> bugs:
> bogomips: 7999.90
> clflush size: 64
> cache_alignment : 64
> address sizes : 39 bits physical, 48 bits virt
erv.enabled.value = false
After a restart of Engine, you'll need to reboot the affected VM to
let its configuration change.
To check that the configuration changed, you should NOT
see anymore this option
hv_relaxed
in the qemu commandline/logs
If this doesn't
se logging. Anyway, its logs are
in /var/log/libvirt/qemu/$VM_NAME.log
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
d
> project-related, like "ovirt-agent"?
Well, we could think of a rename for oVirt 4.0 :)
Not 100% joking: besides being a bit more google-friendlier, that could solve
the packaging troubles and make old-vdsm and
new-vdsm-or-whaterver-we-may-call-it
trivially parallel installable on a g
tell that
- reconstructing from the VDSM log, nothing obviously wrong seems there. But we
need
a complete clean log to be sure.
- if the operation eventually succeeds, to understand the slowness we must
inspect
the QEMU logs (most likely will be unhelpfully terse) and/or investigate QEMU
t
Confirmed. I'm aware of these bugs in particular, which could be related
to a fair amount of mysterious libvirtd crashes:
https://bugzilla.redhat.com/show_bug.cgi?id=1162208
https://bugzilla.redhat.com/show_bug.cgi?id=1171124
https://bugzilla.redhat.com/show_bug.cgi?id=1141159
It seems *mor
entry just updated to
POST).
needs review. ETA for merge: definitely within the week, worst case.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
- Original Message -
> From: "Sandro Bonazzola"
> To: "Francesco Romani" , Users@ovirt.org, de...@ovirt.org
> Sent: Tuesday, November 25, 2014 9:28:25 AM
> Subject: Re: [ovirt-users] Out of the box experience on Fedora - was: Re:
> [QE][ACT
ce we could
have a better vector to spread oVirt?
* what we could do, as oVirt project, to improve the above?
Feedback welcome
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
- Original Message -
> From: "James James"
> To: "Francesco Romani"
> Cc: "users"
> Sent: Friday, 14 November, 2014 4:53:22 PM
> Subject: Re: [ovirt-users] VM migration/creation on host problem ...
>
> In /var/log/libvirt/libvir
tiplexed into
/var/log/messages
please also add QEMU logs as found in
/var/log/libvirt/qemu/$VM_NAME.log
where VM_NAME is "puppetdb" here
thanks,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
u-kvm for ovirt 3.5 if I wanna
> working live migration function?
>
> At this moment it is not working for me.
Live VM migration should work out of the box.
Please add more details if it does'nt.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8
- Original Message -
> From: "Charles Gruener"
> To: "Francesco Romani"
> Cc: "Michal Skrivanek" , "users@ovirt.org Users"
>
> Sent: Monday, October 27, 2014 3:56:00 PM
> Subject: Re: [ovirt-users] oVirt 3.5 on RHEL 6.6 hyperv
th newer ones.
Can you share what is running on your hypervisors? versions of libvirt and
qemu.
Moreover, qemu and libvirt logs would help.
Thanks,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
2014/07/enabling-hyper-v-enlightenments-with-kvm.html
>
> -cpu ...,hv_relaxed,hv_spinlocks=0x1fff,hv_vapic,hv_time
>
> there are plenty of bugs / improvements open, here is the list:
>
> https://bugzilla.redhat.com/buglist.cgi?quicksearch=hv_relaxed&list_id=2902293
I
- Original Message -
> From: "Daniel Helgenberger"
> To: "Francesco Romani"
> Cc: "Dan Kenigsberg" , users@ovirt.org
> Sent: Monday, September 29, 2014 2:54:13 PM
> Subject: Re: [ovirt-users]3.4: VDSM Memory consumption
>
> Hello Fr
o VMs except it's own sampling.
If you are on IRC, on freenode/#vdsm or OFTC/#ovirt, please ping me anytime -
see my sign below for my IRC nickname.
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
g and/or on the oVirt wiki.
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
- Original Message -
> From: "Adam Litke"
> To: "Sandro Bonazzola"
> Cc: Users@ovirt.org, de...@ovirt.org, "Doron Fediuck" ,
> "Eyal Edri" , "Itamar
> Heim" , "David Caro" , "Yair
> Zaslavsky&quo
- Original Message -
> From: "Sandro Bonazzola"
> To: Users@ovirt.org, de...@ovirt.org
> Cc: "Doron Fediuck" , "Eyal Edri" ,
> "Itamar Heim" , "David
> Caro" , "Yair Zaslavsky" ,
> ykap...@redhat.com,
st)
> Looking for method 'Host_setupNetworks' in bridge
>
> And if I search for the data received, like 'STP', there is nothing
> whatsoever.
> As I said, unless this is fixed and we get entries with the same amount of
> data
> as before, it can
...]
192.168.1.53 is the hypervisor host I used
Now the point is maybe I did some mistakes or overlooked some configuration
steps
(maybe blindly hit return instead of changing a default), but I suggest to
improve
the docs/wiki to document how to fix common gotchas and/or to reconfigure
thing
/show_bug.cgi?id=1114978
besides that the feature seems to work nicely
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
hed the output from
virsh (1.2.5) capabilities (caps.txt)
lscpu (lscpu.txt)
lspci (lspci.txt)
+++
[1] You can get a CPU + mainboard with ~85 EURO or even less, and it will
consume
25W fully loaded, much less when idle. The fan is close to inaudible.
[2] I'll put together a document/wiki page w
Hi,
- Original Message -
> From: "Gianluca Cecchi"
> To: "Francesco Romani"
> Cc: "users" , "Roy Golan"
> Sent: Monday, May 12, 2014 9:56:33 AM
> Subject: Re: [ovirt-users] getVdsCapabilites unexpected exception [was: Re:
&
ython-ethtool-0.9-2.fc19.x86_64
> May 10 21:24:23 Updated: python-lxml-3.3.5-1.fc19.x86_64
>
> I can also try to rollback and see...
>
>
> I was right.
> Against what to bugzilla?
> This is a show stopper for fedora 19 ovirt u
read from monitor: Connection reset by peer
can you share the libvirtd and qemu logs?
Hopefully we can find some more information on those logs.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
_
erienced the same problem reported here
https://bugzilla.redhat.com/show_bug.cgi?id=1067064
A fix was already been committed.
About kvm and libvirt, you only need them on the nodes running hypervisors;
engine itself does not depend on them.
--
Francesco Romani
RedHat Engineering Virtualization R &a
al=deathSignal, childUmask=childUmask)
> TypeError: __init__() got an unexpected keyword argument 'childUmask'
> How I can solve it ?
Hi,
please upgrade python-cpopen to version 1.3
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: froman
se newer versions of QEMU have improvements
on this
field: QEMU recently gained native block devices[1], which, among other things,
will make
it more robust in presence of I/O errors, and should improve the error
reporting as well.
RHEL7 should have a version of QEMU with native ISCSI; hopefully NFS will
follow soon
enough.
HTH,
+++
[1] for example, ISCSI, recently merged:
http://comments.gmane.org/gmane.comp.emulators.qemu/92599
work on NFS is ongoing.
--
Francesco Romani
RedHat Engineering Virtualization R & D
IRC: fromani
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
engine and
the actual OS configuration) and worked well on my tests, including
physical disconnections mid-I/O. Well done! :)
--
Francesco Romani
RedHat Engineering Virtualization R & D
IRC: fromani
___
Users mailing list
Users@ovirt.org
98 matches
Mail list logo