[ovirt-users] Re: Upload Cerfiticate issue
I’ve tried your suggestion and continue to get the same results. Based on continuing investigation I’ve found on the Red Hat Knowledge base a resolution to this issue, the following link references the solution: https://access.redhat.com/solutions/354255. However, I’ve run across another issue, since the creation of a new host within ovirt I’ve not been able to access the internet or reach the host/server remotely.Therefore, I’m unable to try the solution provide via the Red Hat Knowledge Base. I’ve reviewed the kernel routing table displayed below: ip route show default via 20.10.20.1 dev eno5 proto static metric 100 default via 20.10.20.1 dev eno6 proto static metric 101 default via 20.10.20.1 dev eno7 proto static metric 102 default via 20.10.20.1 dev ovirtmgmt proto static metric 425 20.10.20.0/24 dev eno5 proto kernel scope link src 20.10.20.65 metric 100 20.10.20.0/24 dev eno6 proto kernel scope link src 20.10.20.66 metric 101 20.10.20.0/24 dev eno7 proto kernel scope link src 20.10.20.67 metric 102 20.10.20.0/24 dev ovirtmgmt proto kernel scope link src 20.10.20.68 metric 425 Is it normal behavior for the host to sever all connection when a “Host” machine is added to ovirt? Is there a solution to this issue? I’ve recognize the risks of having the host exposed to the internet, how would I keep the OS/RHEL 8.6 & ovirt current? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NELEQWSGDYXA2WSN3ASQA6DFMDSHIHFF/
[ovirt-users] Re: Upload Cerfiticate issue
The ovirt server is internal only, could it be my browser configuration? I keep look but I’m not seeing anything. I’ve deleted the certificate and reloaded it several time with change. I’ve tried connection on server and on a workstation nothing appears to be working, I’m getting the same results. What else or where else should I look. I appreciate all of your help. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TD2N7TXBUFURG7M2FFCITHFS26ATM3XS/
[ovirt-users] Re: Upload Cerfiticate issue
I checked the network configuration on both the Client & Server I found network proxy turned off. However, during the installation of ovirt there is a question regarding proxy. The question is as follows: Configure WebSocket Proxy on this machine? (Yes, No) [Yes]: I took the default above could this my issue? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/T3ZSKZLWSGG6IYHXE3RAGHU4RGOHHXDT/
[ovirt-users] Re: Upload Cerfiticate issue
I started to investigate based on your question regarding a secure connection. From that investigation this what I’ve found: When viewing he certificate the AIA section shows the following: Authority Info (AIA) Location: http://ovirtdl380gen10.cscd.net:80/ovirt-engine/services/pki-resource?resource=ca-certificate=X509-PEM-CA Method: CA Issuers It appears that the certificate is being issue/released on port 80, could this be the reason no connection can be established with the “ovirt imageio” service; since the service is looking for a connection on a secured port such as 443? How can or what should be done to correct this. If this is the issue I suspect that I need to have a certificate that is from port 443 or some other secured connection. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2C3FIPZEZ4HQ636J4FTVSEHBML3SLUL7/
[ovirt-users] Re: Upload Cerfiticate issue
I also started to receive the error message below after making the suggested changes: VDSM ovirtdl380gen10 command HSMGetAllTasksStatusesVDS failed: Not SPM: () On my browser it indicates that there is no tracking, verified by my domain, You have granted this website additional permission. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FPGF3C7NRQZSSJMH2RI3RML4EPFPUUBF/
[ovirt-users] Re: Upload Cerfiticate issue
I also noticed that I started to receive the error message below: VDSM ovirtdl380gen10 command HSMGetAllTasksStatusesVDS failed: Not SPM: () Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GQORXAYBUYLT4QXYVOZ6ZAY24F67PVYF/
[ovirt-users] Re: Upload Cerfiticate issue
Made the suggestion that you made earlier I continued to get the same results.
Sharing the files/things you requested below:
ovirt-imageio --show-config
{
"backend_file": {
"buffer_size": 8388608
},
"backend_http": {
"buffer_size": 8388608,
"ca_file": "/etc/pki/ovirt-engine/ca.pem"
},
"backend_nbd": {
"buffer_size": 8388608
},
"control": {
"port": 54324,
"prefer_ipv4": true,
"remove_timeout": 60,
"socket": "/run/ovirt-imageio/sock",
"transport": "unix"
},
"daemon": {
"drop_privileges": true,
"group_name": "ovirtimg",
"max_connections": 8,
"poll_interval": 1.0,
"run_dir": "/run/ovirt-imageio",
"user_name": "ovirtimg"
},
"formatter_long": {
"format": "%(asctime)s %(levelname)-7s (%(threadName)s) [%(name)s]
%(message)s"
},
"formatters": {
"keys": "long"
},
"handler_logfile": {
"args": "(\"/var/log/ovirt-imageio/daemon.log\",)",
"formatter": "long",
"class": "logging.handlers.RotatingFileHandler",
"kwargs": "{\"maxBytes\": 20971520, \"backupCount\": 10}",
"level": "DEBUG"
},
"handler_stderr": {
"args": "()",
"formatter": "long",
"class": "logging.StreamHandler",
"level": "DEBUG"
},
"handlers": {
"keys": "logfile"
},
"local": {
"enable": true,
"socket": "\u/org/ovirt/imageio"
},
"logger_root": {
"handlers": "logfile",
"level": "INFO",
"propagate": 0
},
"loggers": {
"keys": "root"
},
"profile": {
"filename": "/run/ovirt-imageio/profile"
},
"remote": {
"host": "::",
"port": 54322
},
"tls": {
"ca_file": "/etc/pki/vdsm/certs/cacert.pem",
"cert_file": "/etc/pki/vdsm/certs/vdsmcert.pem",
"enable": true,
"enable_tls1_1": false,
"key_file": "/etc/pki/vdsm/keys/vdsmkey.pem"
}
}
ls -lh /etc/pki/ovirt-engine/apache-ca.pem
lrwxrwxrwx. 1 root root 28 May 2 17:57 /etc/pki/ovirt-engine/apache-ca.pem ->
/etc/pki/ovirt-engine/ca.pem
sudo systemctl status ovirt-imageio
● ovirt-imageio.service - oVirt ImageIO Daemon
Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio.service; enabled;
vendor preset: disabled)
Active: active (running) since Tue 2022-05-10 17:45:16 EDT; 12min ago
Main PID: 1564 (ovirt-imageio)
Tasks: 4 (limit: 201976)
Memory: 20.1M
CGroup: /system.slice/ovirt-imageio.service
└─1564 /usr/libexec/platform-python -s /usr/bin/ovirt-imageio
May 10 17:45:14 hpdl380gen10.cscd.net systemd[1]: Starting oVirt ImageIO
Daemon...
May 10 17:45:16 hpdl380gen10.cscd.net systemd[1]: Started oVirt ImageIO Daemon.
Please tell what else I should be looking for or at?
Thanks
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/44632CDVUBB4ZVLHMXSZJODCFS4U4ZIZ/
[ovirt-users] Re: Upload Cerfiticate issue
Thank you very much for your response and I agree with you based on everything I've read. But below are the steps that I've followed: I greatly appreciate the response, however, following you instructions I’m still not able to upload an ISO via the GUI. When try an upload using the GUI I follow the instruction below: • In the pane on the left hand side of the screen, I select “Storage”. • Select “Disks”. • Where I get the screen “Storage > Disks”. • On the top right hand side of the screen, I select “Upload”. • From the pull down menu I select “Start”. • I choose the file/ISO I want to upload, in this case its “CENTOS-Stream” version 9. • At the bottom of the screen I click the “Test Connection” button. • The following messages appears: Connection to “ovirt-imageio-service” has failed. Ensure the “ovirt certificate” is registered as a valid CA in the browser. • I click/select the “ovirt certificate” which is highlighted in blue on my screen. • It displays the option to save the certificate or view it in the browser. My browser is Firefox 91.9.0. • I save the certificate which I later import into my browser (following your instruction). The certificate is accepted by the browser with no errors encountered. • I then restart the upload process again and “Test Connection”. The same message is displayed: Connection to “ovirt-imageio-service” has failed. Ensure the “ovirt certificate” is registered as a valid CA in the browser. The same message as earlier in the process. Is there some place other place I should be looking for more information or something else I should be doing? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2IKSUFVGYTYI2KICH2LYJNS5CVPQEMFJ/
[ovirt-users] Re: Upload Cerfiticate issue
I greatly appreciate the response, however, following you instructions I’m still not able to upload an ISO via the GUI. When try an upload using the GUI I follow the instruction below: • In the pane on the left hand side of the screen, I select “Storage”. • Select “Disks”. • Where I get the screen “Storage > Disks”. • On the top right hand side of the screen, I select “Upload”. • From the pull down menu I select “Start”. • I choose the file/ISO I want to upload, in this case its “CENTOS-Stream” version 9. • At the bottom of the screen I click the “Test Connection” button. • The following messages appears: Connection to “ovirt-imageio-service” has failed. Ensure the “ovirt certificate” is registered as a valid CA in the browser. • I click/select the “ovirt certificate” which is highlighted in blue on my screen. • It displays the option to save the certificate or view it in the browser. My browser is Firefox 91.9.0. • I save the certificate which I later import into my browser (following your instruction). The certificate is accepted by the browser with no errors encountered. • I then restart the upload process again and “Test Connection”. The same message is displayed: Connection to “ovirt-imageio-service” has failed. Ensure the “ovirt certificate” is registered as a valid CA in the browser. The same message as earlier in the process. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WX7Y2PAZJGTMFRTR3XPVEANNWWOFQS3C/
[ovirt-users] Upload Cerfiticate issue
I’m trying to upload an ISO image in ovirt 4.4.10, It’s been a huge challenge to accomplish this. I read several post regarding this issue, I really don’t have s clear understanding of solution to this issue. My experience has not been very fruitful at all. When I try to perform the upload using the web GUI I get the following message in the status column: “Paused by System“. I’ve been reading for roughly three weeks trying to understand and resolve the issue. There is a tremendous amount of discussion centered around changing certificate file located in the directory “etcpki/ovirt-engine”, however it not clear at all what files need to change. My installation is an out-of-box installation with any certificates beginning generated as part of the install process, I’ve imported the certificate that was generated into my browser/Firefox 91.9.0. Based on what I’ve been reading the solution to my problems is that the certificate does not match the certificate defined in the “imageio-service”, my question is why because it was generated as part of the installation? What files in the “/etc/pki/ovirt-engine” must be changed to get things working. Further should or do I copy the certificate saved from the GUI to files under “/etc/pki/ovirt-engine” directory? I feel like I’m so close after six month of reading and re-installs, what do I do next? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YVGGVNOQ5FL7OXW35RGENZHQGTGO624V/
[ovirt-users] Re: No Host listed when trying to create a Storage Domain
I've created a new "Data Center" in this case. When I do select the default "Data Center" I get the same results, are you aware of a work around for this issue? I will file/create a engine UI bug report for this issue. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/V3CZNNXZ5X2NFRMWTJ36NLO3CCAMQZXW/
[ovirt-users] No Host listed when trying to create a Storage Domain
I'm trying to create a new storage domain, I've successfully created a new "Data Center" and Cluster with no issues during the process. However, when I try to created a new storage domain the pull down menu bar is blank. Therefor, I'm unable to create a new storage domain. What might I have missed or not configure properly to prevent the menu bar from getting populated? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YNKME7UNYGSZIXVXAX764IFEXQPJI6OS/
[ovirt-users] What does the ovirtmgmt service do & how do I work withit in regards to networking
I've installed ovirt 4.4.10 several times and found myself not being able to reach out to the internet to perform updates to the OS or ovirt. When installing ovirt I've accepted the defaults and found that networking on my server has stopped working. I've also noticed that the ovirtmgmt service has taken over the network port/NIC that I've assigned in the DNS. My server has six/6 NIC's installed but after the install of ovirt with the defaults I'm unable to perform another network functions other than go to ovirt. How do i get ovirt to co-exist on the server as it relates to networking. I just have the OS & GUI installed and then ovirt. I've checked the firewall and not found anything out the ordinary. When this happens what can I do to get things back to normal, the ability to apply OS and ovirt updates? I'm going to install ovirt again making sure that I don't take the default regarding the firewall, maybe this will help? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WL3W34R7ZVBR7GL4LXEHFT5YRWORIE7E/
[ovirt-users] What does the ovirtmgmt service do & how do I work withit in regards to networking
I've installed ovirt 4.4.10 several times and found myself not being able to reach out to the internet to perform updates to the OS or ovirt. When installing ovirt I've accepted the defaults and found that networking on my server has stopped working. I've also noticed that the ovirtmgmt service has taken over the network port/NIC that I've assigned in the DNS. My server has six/6 NIC's installed but after the install of ovirt with the defaults I'm unable to perform another network functions other than go to ovirt. How do i get ovirt to co-exist on the server as it relates to networking. I just have the OS & GUI installed and then ovirt. I've checked the firewall and not found anything out the ordinary. When this happens what can I do to get things back to normal, the ability to apply OS and ovirt updates? I'm going to install ovirt again making sure that I don't take the default regarding the firewall, maybe this will help? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RF5E3GE7YB4BJNJWAMZBJYGBQIGEH6ZJ/
[ovirt-users] New ovirt 4.4.10 user unable to login
I just create an new user in ovirt 4.4.10 using the tool "ovirt-aaa-jdbc-tool". I'm unable to log into ovirt using the newly created user. I'm getting the error message: The user xyzabcs@internal-authz with profile [internal] is not authorized to perform login. Is the profile the same as a "Group", I've also tried creating a new group also asl follows: sudo ovirt-aaa-jdbc-tool group-manage groupadd --group='Administrator'. I get the following message: Picked up JAVA_TOOL_OPTIONS: -Dcom.redhat.fips=false Usage: /bin/ovirt-aaa-jdbc-tool [options] group-manage groupadd group-name --group Add a group as a member to group-name. Options: --group=[STRING] Name of group to add. --help Show help for this module. Thanks in advance ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KDCEJFP43EGYKSVG4WPM4MF746TPQ6PE/
[ovirt-users] Re: Unable to access ovirt Admin Screen from ovirt Host
I got things working. Thanks so much for your help. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZK77CSLFS2CIUKMQFKDN5EJNA2BROSL4/
[ovirt-users] Re: Unable to access ovirt Admin Screen from ovirt Host
Interestingly, I was able to load the ovirt web console remotely with no issues. however, the issue that I've been experiencing is when I try to load the web console when logged on the the server. Can you help me understand the difference? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GNM6BO3WJFTOODRMHBON2YJLGTKMCO62/
[ovirt-users] Re: Unable to access ovirt Admin Screen from ovirt Host
This has not been easy to say the least I've been working on this for months and have done several re-installs from scratch to include the OS/RHEL 8.5. Below is a snap shot of the logs, I don't understand what they are trying to tell me about the error, any help is greatly appreciated. sudo more /var/log/httpd/error_log [Sat Apr 09 10:47:17.463649 2022] [core:notice] [pid 36315:tid 140286292900160] SELinux policy enabled; httpd running as context system_u:system_ r:httpd_t:s0 [Sat Apr 09 10:47:17.464791 2022] [suexec:notice] [pid 36315:tid 140286292900160] AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Sat Apr 09 10:47:17.512147 2022] [so:warn] [pid 36315:tid 140286292900160] AH01574: module proxy_module is already loaded, skipping AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using fe80::d6f5:efff:fe0f:cd00. Set the 'ServerName' dire ctive globally to suppress this message [Sat Apr 09 10:47:17.532141 2022] [lbmethod_heartbeat:notice] [pid 36315:tid 140286292900160] AH02282: No slotmem from mod_heartmonitor [Sat Apr 09 10:47:17.537642 2022] [mpm_event:notice] [pid 36315:tid 140286292900160] AH00489: Apache/2.4.37 (Red Hat Enterprise Linux) OpenSSL/1. 1.1k mod_fcgid/2.3.9 mod_wsgi/4.6.4 Python/3.6 configured -- resuming normal operations [Sat Apr 09 10:47:17.537676 2022] [core:notice] [pid 36315:tid 140286292900160] AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND' [Sat Apr 09 10:52:36.458433 2022] [core:notice] [pid 3400:tid 139718137252160] SELinux policy enabled; httpd running as context system_u:system_r :httpd_t:s0 [Sat Apr 09 10:52:36.459740 2022] [suexec:notice] [pid 3400:tid 139718137252160] AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Sat Apr 09 10:52:36.482068 2022] [so:warn] [pid 3400:tid 139718137252160] AH01574: module proxy_module is already loaded, skipping AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using fe80::d6f5:efff:fe0f:cd00. Set the 'ServerName' dire ctive globally to suppress this message [Sat Apr 09 10:52:36.501468 2022] [lbmethod_heartbeat:notice] [pid 3400:tid 139718137252160] AH02282: No slotmem from mod_heartmonitor [Sat Apr 09 10:52:36.506571 2022] [mpm_event:notice] [pid 3400:tid 139718137252160] AH00489: Apache/2.4.37 (Red Hat Enterprise Linux) OpenSSL/1.1 .1k mod_fcgid/2.3.9 mod_wsgi/4.6.4 Python/3.6 configured -- resuming normal operations [Sat Apr 09 10:52:36.506594 2022] [core:notice] [pid 3400:tid 139718137252160] AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND' Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RQUEM2OM7LS4KJVK7HQCAH7C672R7PGM/
[ovirt-users] Re: Unable to access ovirt Admin Screen from ovirt Host
I'm seeking help with my issue related to display the ovirt UI Web Admin Screen on my server. I'm very puzzled by this because I can display the UI on a remote machine with no issue. I install ovirt on my server remotely connected to the server via ssh, I had no issues performing the install. As I said earlier I'm able to bring up the Admin UI remotely on the same machine that was connected remotely. What really puzzle me is that, I'm able to bring up the UI remotely but not on the server console. They both are using the same release RHEL 8 and Firefox. When I try to bring up the UI on the server console I get the following message: 404 - File or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable. I confirmed that all of the installed files are stored on the server, where should I start looking? My Server has four/4 network adapters installed with different IP addresses assigned. My DNS has the domain entered for each network adapter all pointing to the same server. My DNS entry for ovirt is ".1234.net" specified four/4 time with a different IP address for each network adapter. Does the install of ovirt latch to a specific network adapter and IP Address? Could this be a permission issue on the server? I'm using the same account and UID on both server and workstation. What ever it might how do I start the debugging process to create a solution? I'm very new to ovirt and Linux so I'm trying to learn. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JOOZK5XV5EE47TK2MN7ACIMYQXYLTIRZ/
[ovirt-users] Unable to access ovirt Admin Screen from ovirt Host
I've reinstalled ovirt 4.4 on my server remotely via cockpit terminal. I'm able to access the ovirt admin screen remotely from the laptop that I used for the install. However, using the same URL I'm unable to gain access to the admin screen. Following the instruction in the documentation I've modified the file: /etc/ovirt-engine/engine.conf.d/99-custom-sso-setup.conf, to reflect the DNS name and I enter in the IP address. But I'm still unable to access the screen from the server console. What else needs to change in order to gain access from the server console? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YRS2UBUQOSPANOHA5CCYPOHARHHZVHDM/
[ovirt-users] Re: Unable to upload ISO Image in ovirt 4.4.10
I don't have the file "ovirt-imageio-proxy" on my system, is there another file that I should be looking at? Once I locate the correct file what content in the file needs to change? I'm using the latest release of "Firefox/91.6.0" as my browser, and i import the "Engine CA" after the fact. However, after the import I tried again and got the same results. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WHEKOE5YSKLPMLBUXMT7KKXXPE6UDAHB/
[ovirt-users] Unable to upload ISO Image in ovirt 4.4.10
I recently installed ovirt 4.4.10 on my server successfully; however; I'm unable to upload images using the ovirt GUI. I tried the following: Storage> Disk> Upload> Start > Completed the form pointing to the source location of the image Once I click the OK button the status of the image go's into a Locked Status then switches to "Paused by System" and jsut hangs from there. A few days later I tried to delete the upload because the state did not change. I tried the following to Cancel the upload: Storage> Disk> Upload> Cancel Once the above is complete the status changes to "Finalizing Cleanup". What should be done to resolve this issue? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WIJFGDZAWGZOKL5A432H33H4XAKDNVV6/
[ovirt-users] Unable to access internet after installing ovirt 4.4.10
I recently installed ovirt on my server that has four/4 network adapters. I recently installed ovirt on the server successfully; however; after the installation I've not been able to access the internet from the server. I have cockpit installed and I see that "ovirtmgmt" has taken control of the first network adapter. I three/3 remaining adapters left so I liked to just access the internet using one or all of the remaining network adapters. I can see using cockpit that there is a little receiving traffic taken place but no sending traffic. How do I get internet traffic going on one of the remaining network adapters? Could this be firewall issue? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WROM3C66UB3ZOD5UEQS5C3BZYC2ANC22/
[ovirt-users] Re: ISO Upload in in Paused by System Status
I viewed the certificate using vi I did see the "Begin Certificate" and "End Certificate" with the certificate in between. I tried adding a new Storage Domain that I wanted to use to store ISO's. It wasn't until then that I found out that I need a certificate. I went to the main page and saw that I that there was a link to the Engine CA Certificate. Click/selected the link and saved the certificate. Then tried to import it into the FireFox browser, which when I started getting the request for a password when trying to import it into the browser. I noticed an issue with the Storage Domain that tried to add, I'm getting message in the event logs that the engine is not able to access to domain. Upon further investigation I put the storage domain in maintenance mode. I've tried to delete the domain or re-activated it with no success so far. This may also be contributing to the problem. So first how do I resolve the issue with the storage domain? I've tried to simply mount it and got the following message: mount: HPDL380Gen10:/var/Shared-Resources/NFS/VM-ISO: can't find in /etc/fstab. I know that things are screwed up, please working me I'm just learning. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GFGRVOIYJGTJVGUFVOPIPBBH7GTUVT2C/
[ovirt-users] Re: ISO Upload in in Paused by System Status
Tried an empty password same results. What could be the problem? thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JRTEZOHBHZKTV3GRBPOL33YMXAAAWO2J/
[ovirt-users] Re: ISO Upload in in Paused by System Status
I obtained the Certificate from the link on from the ovirt console main page. The certificate has been save to storage. I attempt to import the certificate into a FireFox Browser and get the following message: Please enter the password that was used to encrypt this certificate backup: I enter in the same password used during the installation of ovirt. After entering in the password the following message is displayed: Failed to decode the file. Either it is not in PKCS #12 format, has been corrupted, or the password you entered was incorrect. What could be the problem here, I don't have another password to enter? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D3DRU37QBB4V43M2NT7BQKEUDHCFI635/
[ovirt-users] ISO Upload in in Paused by System Status
I'm attempting to upload an ISO that is approximately 9GB in size. I've succssfullly started th upload process via the oVirt Management Console/Disk. The upload started however, it now has a status of "Paused by System". My storage type is set to NFS Data. Is something happing the back ground that contributing to the "Paused by System"? I have mor the 84TB of space available so I don't think it is a space issue. Is there something that I need to do? At this time I'm going to wait and see if it moves forward on its own. Please provide me with any help or direction. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/X2CYDZITCYRPWJIXHP32H6G3K2QI6OLQ/
[ovirt-users] Accessing the oVirt Console Remotely
I've installed ovirt on the my server (HPDL380Gen10) and was able to start the configuration process on the local machine. I'm tried to access the ovirt console remotely via the web however I've had no success. I'm using the same URL that is used locally, but when I execute the URL via my Firefox browser I get the message that it is unable to connect. I've drop the firewall on both the server and client machine as a possible solution but it did not work. Is there something extra that is needed to access the ovirt console remotely? The FQDN is entered into my DNS, however, I did find that during the configuration process that IP was consumed by ovirtmgmt. I was surprised to see that I'm just assuming that its apart of congiruation process. I have other ports on my sever and I have entered them in my DNS also with the same name but a different IP address. What must I do to gain access to the ovirt console remotely, it would surely make the configuration process easy from my desk vs being in the server area. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/56IHHBVEIJ6RYXP2PPAXOCWYTIKT4ETH/
[ovirt-users] Re: Changing the Password Expiration for a User
It worked great thanks for you help. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7Y2ODH4DA4WSVP6WTGJVQTK3B4WXKFKK/
[ovirt-users] Changing the Password Expiration for a User
I've create a new user using ovirt-aaa-jdbc-tool, I'm unable to use the account because the password expiration date has passed. I'm now trying to change the password expiration using the following command: sudo ovirt-aaa-jdbc-tool user edit --password-valid-to=2025-12-31 00:00:00 The above command is not working, I've tried several different formats using double quotes and single quotes, onluy using the date without the time. I've not been able to get anything working, what format should the above command be in? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NF3F2YFJNQM7DXQFU7L7VKQ2ZMPJP4CL/
[ovirt-users] Re: New User not Showing in the web GUI
Thank you very much for the answer it worked. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LU37AT5HVS4AB56ZDFUPQ4YGJBTVYLQ2/
[ovirt-users] Re: New User not Showing in the web GUI
I am logged on to the ovirt-engine via the web interface. Is there an attribute that needs to set that causes the new user to show up in web interface? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/A26SGIEYAKHKOIQVCH3EQV6QDO5UGYU3/
[ovirt-users] New User not Showing in the web GUI
I've added a new user using the CLI ovirt-aaa-jdbc-tool. I've also been able to modify the attributes of the new user and list all the modifications. However the new user does ot show up in the web GUI, a password has been assigned and the user is assigned to the '*' Name Space. What must be done to have the user show up in the web gui? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/F22YCVEWG32AQ6RSBWYLQTLG64XSIOR5/
[ovirt-users] Re: Password at install for admin@internal not working
You had the answer I only needed to use "admin" not "admin@internal". Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QBGS6XLWLICPHM55UHLKNE24VGGJPD3W/
[ovirt-users] Re: Password at install for admin@internal not working
I'm running RHEL 8.4 on an HPDL380 Gen 10. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DABRQMLKVBZOMFSRXONYUEAR2WCTEY2C/
[ovirt-users] Password at install for admin@internal not working
I've installed ovirt several times on a fresh machine from scratch. I've had no problems with the install however I'm unable to login via the web console using the assigned password entered at the time of the install. On the last 3 tries I've kept the password simple to insure that I was not entering the assigned password incorrectly. I continued tp get with each install the message: Unable to log in. Verify your login information or contact the system administrator. I've checked the install log for errors and not found any. While trying to keep the password simple I was warned about the simplicity password but decided to continue because of previous attempts were not successful. are there any addtitional log that I can view to help with this issue? Is there possibly a bug in the install process that has a work around? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/4RL3EMEO5V6A32JE6APF6D3RK6GPEFBT/
[ovirt-users] PostgreSQL password for ovirt 4.4.7
I've finally installed successfully ovirt 4.4.7 using the default installation. I would like to change the passwords for the following userids: postgres, engine database and data warehouse database. Can someone provide me with information grading the files that contain the password to these items? I would also like to know the best way to change the passwords. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LT7KB3EKFVABM7GAZSNHYTB3IHP72LJK/
[ovirt-users] Re: oVirt 4.4.4 not dislaying Sign-on Screen
Sorry for the long delay, I've run the soslogcollector and created a file with a size of 30.9MB. My ISP severally restricts my upload speed to DropBox and the bug reporting system for Red Hat won't let me upload a file more than 19.2MB. Do you have any suggestion how I might get the Log Collector file to oVirt Support? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RV47QKHN6K4NCH52XV5SFNDVZGYXKJZ3/
[ovirt-users] Re: oVirt 4.4.4 not dislaying Sign-on Screen
I've re-installed oVirt 4.4.4 without capital letter, I continue to get the same results. Do you have any idea of where to start looking for a solution? What could the error message "Internal Server Error" be coming from, "oVirt", "FireFox Browser" or "Apache Server". Where do I start looking? Nothing seems to be working at this point, my OS is "RHEL 8.3" with all security patches and fixes applied. Can you think anything or a place to start working towards a solution? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/4VIE4ZHHHUZKBEPJH55BSU6JEUEKE6WD/
[ovirt-users] Re: oVirt 4.4.4 not dislaying Sign-on Screen
One more note: When I look at the Engine Database, Data Warehouse Database I can see that Tables are created as part of the installation of oVirt 4.4.4. Therefore re-forcing that the installation process was succsssful. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YDVAFAVSOFOH2GV2E4NXSX4IL323ZUOU/
[ovirt-users] Re: oVirt 4.4.4 not dislaying Sign-on Screen
sudo engine-setup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: /etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf, /etc/ovirt-engine-setup.conf.d/10-packaging.conf Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20210304181530-lepm6a.log Version: otopi-1.9.2 (otopi-1.9.2-1.el8) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup (late) [ INFO ] Stage: Environment customization --== PRODUCT OPTIONS ==-- Configure Cinderlib integration (Currently in tech preview) (Yes, No) [No]: Configure Engine on this host (Yes, No) [Yes]: Configuring ovirt-provider-ovn also sets the Default cluster's default network provider to ovirt-provider-ovn. Non-Default clusters may be configured with an OVN after installation. Configure ovirt-provider-ovn (Yes, No) [Yes]: Configure WebSocket Proxy on this host (Yes, No) [Yes]: * Please note * : Data Warehouse is required for the engine. If you choose to not configure it on this host, you have to configure it on a remote host, and then configure the engine on this host so that it can access the database of the remote Data Warehouse host. Configure Data Warehouse on this host (Yes, No) [Yes]: Configure Grafana on this host (Yes, No) [Yes]: Configure VM Console Proxy on this host (Yes, No) [Yes]: --== PACKAGES ==-- [ INFO ] Checking for product updates... [ INFO ] No product updates found --== NETWORK CONFIGURATION ==-- Host fully qualified DNS name of this server [Lenovo-P52]: Lenovo-P52.cscd.net Setup can automatically configure the firewall on this system. Note: automatic configuration of the firewall may overwrite current settings. Do you want Setup to configure the firewall? (Yes, No) [Yes]: [ INFO ] firewalld will be configured as firewall manager. --== DATABASE CONFIGURATION ==-- Where is the DWH database located? (Local, Remote) [Local]: Remote Where is the Engine database located? (Local, Remote) [Local]: Remote Please create the database for the DWH to use. To create a user: postgres=# create role with login encrypted password ''; To create a database: postgres=# create database owner template template0 encoding 'UTF8' lc_collate 'en_US.UTF-8' lc_ctype 'en_US.UTF-8'; If you plan for a remote application to use this database, make sure it can be accessed remotely. DWH database host [localhost]: Lenovo-P52 DWH database port [5432]: DWH database secured connection (Yes, No) [No]: DWH database name [ovirt_engine_history]: DWH database user [ovirt_engine_history]: DWH database password: Please create the database for the Engine to use. To create a user: postgres=# create role with login encrypted password ''; To create a database: postgres=# create database owner template template0 encoding 'UTF8' lc_collate 'en_US.UTF-8' lc_ctype 'en_US.UTF-8'; If you plan for a remote application to use this database, make sure it can be accessed remotely. Engine database host [localhost]: Lenovo-P52 Engine database port [5432]: Engine database secured connection (Yes, No) [No]: Engine database name [engine]: Engine database user [engine]: Engine database password: Grafana database user [ovirt_engine_history_grafana]: Grafana database password: --== OVIRT ENGINE CONFIGURATION ==-- Engine admin password: Confirm engine admin password: Application mode (Virt, Gluster, Both) [Both]: Use default credentials (admin@internal) for ovirt-provider-ovn (Yes, No) [Yes]: --== STORAGE CONFIGURATION ==-- Default SAN wipe after delete (Yes, No) [No]: --== PKI CONFIGURATION ==-- Organization name for certificate [cscd.net]: --== APACHE CONFIGURATION ==-- Setup can configure the default page of the web server to present the application home page. This may conflict with existing applications. Do you wish to set the application as the default page of the web server? (Yes, No) [Yes]: No Setup can configure apache to use SSL using a certificate issued from the internal CA. Do you wish Setup to configure that, or prefer to perform that manually?
[ovirt-users] Re: oVirt 4.4.4 not dislaying Sign-on Screen
I’ve install ovirt multiple times with no errors and so far I’ve not been able to get the SSO to display in my Firefox browser. However thru trial and error I’ve discovered that when I enter the following URL address: https://localhost:443/ovirt-engine I get the following message below: The FQDN used to access the system is not a valid engine FQDN. You must access the system using the engine FQDN or one of the engine alternate FQDNs. Click here to continue I’ve installed oVirt 4.4.4 on a standalone machine with no DNS, what can I do to resolve this issue? When I click/select the “Continue” link I get the following message: Having troubles finding this site. What could I be doing wrong to cause this error to occur? What should I be doing during the installation to prevent this from occurring? Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6THJUU5VV4Q4IK2PX53LV4HXGYHYFQ5D/
[ovirt-users] oVirt 4.4.4 not dislaying Sign-on Screen
I recently installed oVirt 4.4.4, everything appeared to run successfully, however, I’m unable to get the sign-on screen to display on my RHEL 8.3 machine. I did do an install using the remote database installation. I encountered no issue with the install, I can see the “engine” and “ovirt_engine_history” in PostgreSQL 13.3. The tables and table spaces have all been created as designed by the installation process. When I enter the URL that was displayed once the installation completed I get the following information displayed on the screen: Internal Error I’ve tried using the port 443 and port 80 URL and get the same results. The URL are as follows: http://WorkstationName:80/ovirt-engine https://WorkstationName:443/ovirt-engine For three days I’ve been trying to locate logs that will help me located and resolve the problem, but so far I’ve had no luck. Can anyone tell where I should start looking to resolve my issue? I’ve checked several system logs and logs for Apache with luck. What should I be looking for within the logs? What logs should I be looking at? I don’t believe my issue is with the back-end database, I thinks its something with Apache not being able to find the web pages to display. How can I start to investigate my problem an develop a solution? My Linux/RHEL 8.3 OS has all of the latest patches and fixes applied. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FRZLBT4CDWHZPBISHSDEQJIQL5JIHDX2/
