Hello,
I'd like to check the status of "global ha maintenance" via rest api.
Can't find any hint on this in the api docs - only for enable/disable...
any ideas?
thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le.
Hi,
in our environment we need to either specify proxy settings or use
foreman/katello repositories.
I'd like to test both ways but the installer with the ansible scripts behind
don't seem to use the hosts settings.
Where do I have to adopt the install scripts and will there be in future a GU
Thanks Strahil and Sandro for your replies and sorry for the delay.
@strahil
[main]
gpgcheck=1
installonly_limit=3
clean_requirements_on_remove=True
best=True
skip_if_unavailable=False
Which it just is the original dnf.conf. To this, we'd apply the proxy settings
written above the question. But
Hi all,
in our environment, CentOS7 and RHEL7 for the most part (Ovirt 4.3 and RHV
4.3), we are able to set a proxy directly in /etc/yum.conf (or on the single
repo) to momentarily bypass some network restrictions.
The proxy settings looks like this:
proxy=http://our-proxy.domain:8080
proxy_usern
Hi,
I think we ran into this bug
https://bugzilla.redhat.com/show_bug.cgi?id=1802277 and
https://access.redhat.com/solutions/5174961 as we have exactly that problems
and log-entries.
As there are now several VMs that cannot create (or delete) snapshots
accordingly we cannot do backups on tha
Hi!
I've got an existing Grafana installation and would like to integrate our
ovirt/rhev infrastructure.
How could I do that?
Thanks for any advice,
Markus
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
I updated to 4.3.6 and tried again with admin@internal - this time it works...
But got into another trouble: our servers are only allowed to use internal
repositories and gitlab. After deployment of the "ovirt-metrics-installer" VM
that installer VM tries to load from external repositories. I ma
The curl command was just a try - I need to configure the authentication
information in "metrics-store-config.yml" and
"secure_vars.yaml". Somehow I've got to select the authentication profile - eg.
"internal" for "admin@internal" or "Domain" for auth with AD User.
But this is only an assumption
I also cannot authenticate e.g. with
curl -u admin@internal:pass https://.at/ovirt-engine/api
access_denied: Cannot authenticate user 'ADMIN@INTERNAL': No valid profile
found in credentials.
How can I specify the profile?
___
Users mailing list -
Had the same problem - was my fault: had to remove password from private key
(hence the name "apache.key.NOPASS")
Maybe you'll double check that.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Sta
Hi,
oVirt 4.3.5
changed certificate to one from an official CA
configured active directory auth
no kerberos / no ldapS
as per:
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html-single/metrics_store_installation_guide/index#Installing_metrics_store
ANSIBLE_JINJA2_EXTE
Hi,
I've changed the cert to an official cert using the howto at
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html
Got two problems/questions now:
1. The image-io-proxy doesn't work now
2. I tried to upload an ISO image, which is stuck and locked now
@1: Which logs should
Hi,
I've got a oVirt Infrastructure with 4 nodes and a self-hosted engine. The
hosted engine also manages additional 4 nodes in 4 datacenters.
Two tasks:
- Re installation of our infrastructure without interfering or interrupting the
external nodes.
- Separate the external hosts from our infras
Would be really glad for any input in this matter!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/
Hi,
I’m not sure if my thread before is correctly received by everyone when posted
via the website...therefore again via email.
Sorry if now everyone received this twice...
---
We are running our ovirt 4.3 test infrastructure on 4 Centos hosts. Our
self-hosted engine further manages several
Hi!
We have installed our test infrastructure on 4 Centos hosts. Our self-hosted
engine further manages serveral stand alone hosts as separate datacenters.
We'd like now to reinstall the whole thing in a best practice way with oVirt
node and a fresh hosted engine.
We have planned to:
- set u
Hi,
looking for a backup solution compareable to vmware/veeam - ie. features like
agent-less, incremental, lan-free backups with dedup and single item restore.
As I understand the main construction site for all commercial backup solutions
available for kvm/rhev was the underlying qemu with its
Same error here - any news on this?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about
Hi all,
I've got a design question:
Are there any best practices regarding NFS datastores especially datastore
sizing? Should I use one big NFS datastore and expand it on demand or should
the size not exceed a certain limit and start with a new NFS datastore?
Are there any other configuration c
no...
all logs in that folder are attached in the mail before.
Von: Simone Tiraboschi
Gesendet: Donnerstag, 24. Jänner 2019 15:16:52
An: Markus Schaufler
Cc: Dominik Holler; users@ovirt.org
Betreff: Re: [ovirt-users] ovirt 4.2 HCI rollout
On Thu, Jan 24, 2019
The hosted engine is not running and cannot be started.
Von: Simone Tiraboschi
Gesendet: Donnerstag, 24. Jänner 2019 14:45:59
An: Markus Schaufler
Cc: Dominik Holler; users@ovirt.org
Betreff: Re: [ovirt-users] ovirt 4.2 HCI rollout
On Thu, Jan 24, 2019 at 2
Hi,
I'm trying a (nested) ovirt 4.2.7 HCI rollout on 3 centos VM's by following
https://ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyperconverged.html
gluster deployment was successful but at HE deployment "stage 5" I got
following error:
[ INFO ] TASK [Reconfigure OVN centra
I see - thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guideline
Centos 7.5, ovirt 4.2.7
it works when pinpointing the vm's to a host and enable cpu-passthrough.
but i presume it should work without this workaround too.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
P
On the three VMs for the HCI rollout:
virt-host-validate
QEMU: Checking for hardware virtualization :
FAIL (Only emulated CPUs are available, performance will be significantly
limited)
QEMU: Checking if device /dev/vhost-net exists
Hi!
I'd like to try the HCI Rollout
https://ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyperconverged/
on my oVirt Infrastructure.
The hosts have "nested virtualization" active, but when starting the Hosted
Engine deployment from cockpit an the error "Hardware virtualization
Hi!
I've testet a backup solution which turned out to work not as expected. It left
some VM's turned off which cannot be restarted.
When trying to delete the snapshot(s) of the vms following error message
occurs:
"Cannot remove Snapshot. The following attached disks are in ILLEGAL status:
Sys
Will try - thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidel
Hi!
Is there a way to manage several external standalone KVM's with oVirt?
So to say - import the KVM Hosts (not the VM's).
regards,
Markus
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statemen
Hi,
I configured a VMware Provider (Test success) and tried to import a VM which
fails shortly after starting.
Failed to import Vm SK-Test-VSAN to Data Center Default, Cluster Default
from engine.log:
"HSMGetAllTasksStatusesVDS failed: Error creating a new volume: (u"Volume
creation 9909f715-c
I did. And it didn't help me. I tried several requests like
GET
/ovirt-engine/api/datacenters/{datacenter:id}/storagedomains/{storagedomain:id}/disks/{disk:id}
But there is no virtio-scsi information at all. I suppose the hosted engine
itself does not need to know that information.
The workflo
To precise my question a little bit further: I'm looking for a way to add
several virtio-scsi disks in a specific order via the rest-api and/or to
retrieve information about the virtio-scsi disk adresses from vms via the
rest-api.
thanks!
___
Users ma
Hi!
We are developing a tool for automated vm rollouts and struggle with the disk
ordering which seems to be completly random?
ie. when creating a vm with 3 disks the order on the virtio scsi bus is
different each time - which of course causes troubles when executing the next
steps.
Thanks for
Update2:
manually downloaded docker images and excluded the check
docker_image_availability.
ran into the next problem:
#
EXEC /bin/sh -c 'rm -f -r
/root/.ansible/tmp/ansible-tmp-1539706227.48-64167276003747/ > /dev/null 2>&1
&& sleep 0'
FAILED - RETRYING: Start and
Update:
A test with "skopeo inspect" ran successfully - "docker pull" not. So I
followed
https://stackoverflow.com/questions/23111631/cannot-download-docker-images-behind-a-proxy
Docker pull works now, but the deploy script still fails with the same error.
Also tried to add
environment:
Hi,
trying to install the metrics store following the updated install guide
https://www.ovirt.org/documentation/metrics-install-guide/Setting_Up_OpenShift_Aggregated_Logging/
Prerequisites and Network Check playbook run through; when executing
ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -
Don't know what now really worked, but the tasks are gone (restarted engine,
host, ran again the taskcleaner script...)
Thanks anyway!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: http
Found out what caused the trouble: The preallocation of a disk on a NFS storage
(of course) does not work. But instead of throwing an error the task remains
forever and can't be deleted.
Any idea on that?
___
Users mailing list -- users@ovirt.org
To un
Already done - made no difference.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about
Hi,
The task "Adding disk" is stuck at "creating volume".
I tried to delete the task with "taskcleaner.sh", at CLI with list / remove
jobs, deleted lastly the VM and restartet the engine-vm.
But its still in the task list.
Any idea to remove this job?
___
Hi!
I'm having trouble installing the oVirt Metrics Store following this
https://www.ovirt.org/develop/release-management/features/metrics/metrics-store-installation/
respectively this guide
https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/
When executi
Hi!
We use in our test infrastructure a NetApp shared fc storage and wonder how a
backup strategie could look like.
Full backups aren't the problem - trigger HV Snapshots including guest FS
freeze / quiece, trigger NetApp Snapshot, delete HV Snapshots.
Currently I'm struggeling on how to recove
Hi!
I created an NFS ISO Domain but couldn't find any upload button. Because
uploading ISO files on the Data Domain I went that comfortable way. I
successfully started Installation of Windows Server 2016
until the virtio Drivers for the disk are needed. So I tried to Change CD but
following err
43 matches
Mail list logo