Re: [OpenSIPS-Users] Opensips-cp php versions supported

[trevor]

On Wed, 2023-09-06 at 05:25 +, r...@rvgeerligs.nl wrote:
> Hi,
> 
> I had the same. Had to work back towards PHP 7.4. There are very big
> changes in syntax in 8.1. And it seems the OCP has not adapted its
> sources. As you have also noticed, that is a lot of work.
> 
> Regards,
> 
> Ronald

Thanks for the confirmation will have to stick to 7.4 then

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips-cp php versions supported

[rvg]

Hi,

I had the same. Had to work back towards PHP 7.4. There are very big changes in 
syntax in 8.1. And it seems the OCP has not adapted its sources. As you have 
also noticed, that is a lot of work.

Regards,

Ronald



September 5, 2023 at 11:49 PM, tre...@webon.co.za wrote:


> 
> Hi Guys, 
> 
> Cant seem to find any info on what versions of PHP work with OCP, I
> just installed 9.3.2 on PHP 8.1 (Centos9 Stream) and other than login
> nothing was working every page would just display a blank body,
> checking php logs gives me a php exception every page load, switcing to
> php7.4 everything seems to be working so far. does OCP not support php
> 8.X?
> 
> [05-Sep-2023 21:27:51 UTC] PHP Fatal error: Uncaught Error: Call to
> undefined function each() in /var/www/opensips-
> cp/web/tools/admin/boxes_config/template/menu.php:46
> 
> [05-Sep-2023 21:25:42 UTC] PHP Fatal error: Uncaught Error: Attempt to
> assign property "addresses" on null in /var/www/opensips-
> cp/config/tools/system/addresses/settings.inc.php:24
> 
> Thanks
> Trevor
> 
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] Opensips-cp php versions supported

[trevor]

Hi Guys, 

Cant seem to find any info on what versions of PHP work with OCP, I
just installed 9.3.2 on PHP 8.1 (Centos9 Stream) and other than login
nothing was working every page would just display a blank body,
checking php logs gives me a php exception every page load, switcing to
php7.4 everything seems to be working so far. does OCP not support php
8.X?

[05-Sep-2023 21:27:51 UTC] PHP Fatal error:  Uncaught Error: Call to
undefined function each() in /var/www/opensips-
cp/web/tools/admin/boxes_config/template/menu.php:46


[05-Sep-2023 21:25:42 UTC] PHP Fatal error:  Uncaught Error: Attempt to
assign property "addresses" on null in /var/www/opensips-
cp/config/tools/system/addresses/settings.inc.php:24

Thanks
Trevor

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Tahir Almas Dhesi]

It get fixed   actually permission.so module was missing in configuration
file

regards
*Tahir Almas*

Managing Partner
ICT Innovations
http://www.ictinnovations.com
Leveraging open source in ICT





On Thu, Aug 3, 2023 at 3:25 PM Tahir Almas Dhesi 
wrote:

> My installation is not listening on port , what modification i need to
> do ?
>
> regards
> *Tahir Almas*
>
> Managing Partner
> ICT Innovations
> http://www.ictinnovations.com
> Leveraging open source in ICT
>
>
> On Tue, Sep 20, 2022 at 5:06 PM Bogdan-Andrei Iancu 
> wrote:
>
>> Hi,
>>
>> Is your opensips listening on the  port?
>>   netstat -tlnp | grep opensips
>>
>> Do you see any errors in the opensips logs when running doing the reload ?
>>
>> Do you see any communication on the  port when doing the reload?
>>ngrep -qtd any port 
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>>
>> OpenSIPS Founder and Developer
>>   https://www.opensips-solutions.com
>> OpenSIPS Summit 27-30 Sept 2022, Athens
>>   https://www.opensips.org/events/Summit-2022Athens/
>>
>> On 9/14/22 6:42 PM, mtck01 wrote:
>>
>> Thank you, I managed to load the ‘permissions module’, and no more error,
>> but nothing happens, just stuck on “Sending to json:127.0.0.1:/mi :”
>> without error or successful confirmation.
>>
>>
>>
>> Regards,
>>
>> Martin
>>
>>
>>
>> ___
>> Users mailing 
>> listUsers@lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>> ___
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Tahir Almas Dhesi]

My installation is not listening on port , what modification i need to
do ?

regards
*Tahir Almas*

Managing Partner
ICT Innovations
http://www.ictinnovations.com
Leveraging open source in ICT


On Tue, Sep 20, 2022 at 5:06 PM Bogdan-Andrei Iancu 
wrote:

> Hi,
>
> Is your opensips listening on the  port?
>   netstat -tlnp | grep opensips
>
> Do you see any errors in the opensips logs when running doing the reload ?
>
> Do you see any communication on the  port when doing the reload?
>ngrep -qtd any port 
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
>   https://www.opensips-solutions.com
> OpenSIPS Summit 27-30 Sept 2022, Athens
>   https://www.opensips.org/events/Summit-2022Athens/
>
> On 9/14/22 6:42 PM, mtck01 wrote:
>
> Thank you, I managed to load the ‘permissions module’, and no more error,
> but nothing happens, just stuck on “Sending to json:127.0.0.1:/mi :”
> without error or successful confirmation.
>
>
>
> Regards,
>
> Martin
>
>
>
> ___
> Users mailing 
> listUsers@lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] - OpenSIPS-CP

[Nitesh Divecha]

Hello All,

Solved this issue by downgrading from PHP8.1 to PHP7.4.



On Wed, Dec 14, 2022 at 5:01 PM Nitesh Divecha 
wrote:

> Hello All,
>
> I'm setting up a fresh install and running into issues with OpenSIPS
> Control Panel 9.3.2.
>
> System specs:
> Ubuntu 22.04.1 LTS
> OpenSIPS 3.3.2
> OpenSIPS Control Panel (
> https://github.com/OpenSIPS/opensips-cp/archive/9.3.2.zip)
>
> CP was installed successfully and I was able to login with user/pass but
> when I click on (Users -> User management or Alias management) or any
> (System -> Address, etc) it throws PHP exceptions:
>
> [Wed Dec 14 21:49:29.216426 2022] [php:error] [pid 32857] [client
> 10.0.0.34:57311] PHP Fatal error:  Uncaught Error: Attempt to assign
> property "user_management" on null in
> /var/www/html/opensips-cp/config/tools/users/user_management/settings.inc.php:25\nStack
> trace:\n#0 /var/www/html/opensips-cp/web/common/cfg_comm.php(203):
> require()\n#1 /var/www/html/opensips-cp/web/common/cfg_comm.php(340):
> get_params_from_tool()\n#2
> /var/www/html/opensips-cp/web/common/cfg_comm.php(332):
> session_load_from_tool()\n#3
> /var/www/html/opensips-cp/web/tools/users/user_management/template/header.php(32):
> session_load()\n#4
> /var/www/html/opensips-cp/web/tools/users/user_management/user_management.php(24):
> require('...')\n#5 {main}\n  thrown in
> /var/www/html/opensips-cp/config/tools/users/user_management/settings.inc.php
> on line 25, referer: http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:47.057497 2022] [php:warn] [pid 32858] [client
> 10.0.0.34:57323] PHP Warning:  Undefined array key "nodes" in
> /var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
> http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:47.057553 2022] [php:warn] [pid 32858] [client
> 10.0.0.34:57323] PHP Warning:  Undefined array key "nodes" in
> /var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
> http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:47.057564 2022] [php:warn] [pid 32858] [client
> 10.0.0.34:57323] PHP Warning:  Undefined array key "nodes" in
> /var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
> http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:47.057629 2022] [php:error] [pid 32858] [client
> 10.0.0.34:57323] PHP Fatal error:  Uncaught Error: Attempt to assign
> property "alias_management" on null in
> /var/www/html/opensips-cp/config/tools/users/alias_management/settings.inc.php:24\nStack
> trace:\n#0 /var/www/html/opensips-cp/web/common/cfg_comm.php(203):
> require()\n#1 /var/www/html/opensips-cp/web/common/cfg_comm.php(340):
> get_params_from_tool()\n#2
> /var/www/html/opensips-cp/web/common/cfg_comm.php(332):
> session_load_from_tool()\n#3
> /var/www/html/opensips-cp/web/tools/users/alias_management/template/header.php(33):
> session_load()\n#4
> /var/www/html/opensips-cp/web/tools/users/alias_management/alias_management.php(24):
> require('...')\n#5 {main}\n  thrown in
> /var/www/html/opensips-cp/config/tools/users/alias_management/settings.inc.php
> on line 24, referer: http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:52.209761 2022] [php:warn] [pid 32859] [client
> 10.0.0.34:57330] PHP Warning:  Undefined array key "nodes" in
> /var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
> http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:52.209814 2022] [php:warn] [pid 32859] [client
> 10.0.0.34:57330] PHP Warning:  Undefined array key "nodes" in
> /var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
> http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:52.209821 2022] [php:warn] [pid 32859] [client
> 10.0.0.34:57330] PHP Warning:  Undefined array key "nodes" in
> /var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
> http://10.0.0.200/cp/menu.php
> [Wed Dec 14 21:49:52.209920 2022] [php:error] [pid 32859] [client
> 10.0.0.34:57330] PHP Fatal error:  Uncaught Error: Attempt to assign
> property "addresses" on null in
> /var/www/html/opensips-cp/config/tools/system/addresses/settings.inc.php:24\nStack
> trace:\n#0 /var/www/html/opensips-cp/web/common/cfg_comm.php(203):
> require()\n#1 /var/www/html/opensips-cp/web/common/cfg_comm.php(340):
> get_params_from_tool()\n#2
> /var/www/html/opensips-cp/web/common/cfg_comm.php(332):
> session_load_from_tool()\n#3
> /var/www/html/opensips-cp/web/tools/system/addresses/template/header.php(32):
> session_load()\n#4
> /var/www/html/opensips-cp/web/tools/system/addresses/address.php(24):
> require('...')\n#5 {main}\n  thrown in
> /var/www/html/opensips-cp/config/tools/system/addresses/settings.inc.php on
> line 24, referer: http://10.0.0.200/cp/menu.php
>
> Any thoughts or suggestions?
>
> Thanks in advance.
>
> Cheers,
> Nitesh
>
>
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] - OpenSIPS-CP

[Nitesh Divecha]

Hello All,

I'm setting up a fresh install and running into issues with OpenSIPS
Control Panel 9.3.2.

System specs:
Ubuntu 22.04.1 LTS
OpenSIPS 3.3.2
OpenSIPS Control Panel (
https://github.com/OpenSIPS/opensips-cp/archive/9.3.2.zip)

CP was installed successfully and I was able to login with user/pass but
when I click on (Users -> User management or Alias management) or any
(System -> Address, etc) it throws PHP exceptions:

[Wed Dec 14 21:49:29.216426 2022] [php:error] [pid 32857] [client
10.0.0.34:57311] PHP Fatal error:  Uncaught Error: Attempt to assign
property "user_management" on null in
/var/www/html/opensips-cp/config/tools/users/user_management/settings.inc.php:25\nStack
trace:\n#0 /var/www/html/opensips-cp/web/common/cfg_comm.php(203):
require()\n#1 /var/www/html/opensips-cp/web/common/cfg_comm.php(340):
get_params_from_tool()\n#2
/var/www/html/opensips-cp/web/common/cfg_comm.php(332):
session_load_from_tool()\n#3
/var/www/html/opensips-cp/web/tools/users/user_management/template/header.php(32):
session_load()\n#4
/var/www/html/opensips-cp/web/tools/users/user_management/user_management.php(24):
require('...')\n#5 {main}\n  thrown in
/var/www/html/opensips-cp/config/tools/users/user_management/settings.inc.php
on line 25, referer: http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:47.057497 2022] [php:warn] [pid 32858] [client
10.0.0.34:57323] PHP Warning:  Undefined array key "nodes" in
/var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:47.057553 2022] [php:warn] [pid 32858] [client
10.0.0.34:57323] PHP Warning:  Undefined array key "nodes" in
/var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:47.057564 2022] [php:warn] [pid 32858] [client
10.0.0.34:57323] PHP Warning:  Undefined array key "nodes" in
/var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:47.057629 2022] [php:error] [pid 32858] [client
10.0.0.34:57323] PHP Fatal error:  Uncaught Error: Attempt to assign
property "alias_management" on null in
/var/www/html/opensips-cp/config/tools/users/alias_management/settings.inc.php:24\nStack
trace:\n#0 /var/www/html/opensips-cp/web/common/cfg_comm.php(203):
require()\n#1 /var/www/html/opensips-cp/web/common/cfg_comm.php(340):
get_params_from_tool()\n#2
/var/www/html/opensips-cp/web/common/cfg_comm.php(332):
session_load_from_tool()\n#3
/var/www/html/opensips-cp/web/tools/users/alias_management/template/header.php(33):
session_load()\n#4
/var/www/html/opensips-cp/web/tools/users/alias_management/alias_management.php(24):
require('...')\n#5 {main}\n  thrown in
/var/www/html/opensips-cp/config/tools/users/alias_management/settings.inc.php
on line 24, referer: http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:52.209761 2022] [php:warn] [pid 32859] [client
10.0.0.34:57330] PHP Warning:  Undefined array key "nodes" in
/var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:52.209814 2022] [php:warn] [pid 32859] [client
10.0.0.34:57330] PHP Warning:  Undefined array key "nodes" in
/var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:52.209821 2022] [php:warn] [pid 32859] [client
10.0.0.34:57330] PHP Warning:  Undefined array key "nodes" in
/var/www/html/opensips-cp/config/boxes.load.php on line 50, referer:
http://10.0.0.200/cp/menu.php
[Wed Dec 14 21:49:52.209920 2022] [php:error] [pid 32859] [client
10.0.0.34:57330] PHP Fatal error:  Uncaught Error: Attempt to assign
property "addresses" on null in
/var/www/html/opensips-cp/config/tools/system/addresses/settings.inc.php:24\nStack
trace:\n#0 /var/www/html/opensips-cp/web/common/cfg_comm.php(203):
require()\n#1 /var/www/html/opensips-cp/web/common/cfg_comm.php(340):
get_params_from_tool()\n#2
/var/www/html/opensips-cp/web/common/cfg_comm.php(332):
session_load_from_tool()\n#3
/var/www/html/opensips-cp/web/tools/system/addresses/template/header.php(32):
session_load()\n#4
/var/www/html/opensips-cp/web/tools/system/addresses/address.php(24):
require('...')\n#5 {main}\n  thrown in
/var/www/html/opensips-cp/config/tools/system/addresses/settings.inc.php on
line 24, referer: http://10.0.0.200/cp/menu.php

Any thoughts or suggestions?

Thanks in advance.

Cheers,
Nitesh
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Bogdan-Andrei Iancu]

Hi,

Is your opensips listening on the  port?
  netstat -tlnp | grep opensips

Do you see any errors in the opensips logs when running doing the reload ?

Do you see any communication on the  port when doing the reload?
   ngrep -qtd any port 

Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
  https://www.opensips.org/events/Summit-2022Athens/

On 9/14/22 6:42 PM, mtck01 wrote:


Thank you, I managed to load the ‘permissions module’, and no more 
error, but nothing happens, just stuck on “Sending to 
json:127.0.0.1:/mi :” without error or successful confirmation.


Regards,

Martin


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[Bogdan-Andrei Iancu]

Hi Bela,

I just did a backport from master to 9.3.2 for the SHA support, see
https://github.com/OpenSIPS/opensips-cp/commit/de1e45838eacc8272357f0fb9f8758deaee3

Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
  https://www.opensips.org/events/Summit-2022Athens/

On 8/9/22 12:37 PM, Bogdan-Andrei Iancu wrote:

Hi Bela,

The OCP does not support ha1_sha256 AFAIK. Consider opening a feature 
request here https://github.com/OpenSIPS/opensips-cp/issues


Regards,
Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
   https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
   https://www.opensips.org/events/Summit-2022Athens/
On 6/29/22 9:10 AM, Bela H wrote:


Hi all,

Is there any way to add new subscriber from OpenSIPS CP 9.3.2 using 
password mode ha1_sha256?


The ha1 (MD5(username:realm:password)) works fine but I had no luck 
with the value generation for the ha1_sha256 field in “subscriber” 
table.


I have this setting:

modparam("auth_db", "calculate_ha1", 0)

modparam("auth_db", "password_column", "ha1_sha256")

Thanks!

Bela


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[Bogdan-Andrei Iancu]

Hi,

Some more info on this: the challenge function allows you to specify a 
list of algorithms, not only one, so you can try "MD5,SHA-256" -> this 
will allow the client to pick the one it supports.


But in order to have this multi-algs working, be sure you do NOT set the 
"password_column" modparam (as the module will auto-detect witch column 
to use, depending on the alg). Just keep the calculate_ha1 to 0.


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
  https://www.opensips.org/events/Summit-2022Athens/

On 9/15/22 10:56 AM, jacky z wrote:

Correction on my comments. It is a client side issue. Thank you!

On Thu, Sep 15, 2022 at 3:40 PM jacky z > wrote:


After checking the log in the client side, here are some
interesting findings:

Here is the what the client side received:

WWW-Authenticate: Digest realm="sip.domain.com
",
nonce="3mKlesEwotxnM5nLMMLgQA63E6VTKsTFpEkK7OkoE4QA",
qop="auth,auth-int", algorithm=SHA-256

Then the client side logs show:

15:25:51.858       ...Unsupported digest algorithm "SHA-256"
15:25:51.859      SIP registration error: Invalid/unsupported
digest algorithm

Firstly, if the server side did not include SHA-256 in the SIP
message, there would be no such issue. I don't understand why it
needs to inform the client side "SHA-256". Secondly, if the client
side just simply ignored "SHA-256", there would be no such issue.
However, the client side treated it as not supported.

On Thu, Sep 15, 2022 at 3:16 PM jacky z mailto:zjack0...@gmail.com>> wrote:

Hi Bogdan-Andrei,

I tried either specifying it or not. Neither worked. Here is
the script when I tried:

www_challenge("","auth,auth-int","SHA-256");

I also tried specifying the realm in the above code. When the
above is used, there is no such error, but always returns 401.
I checked the column ha1_sha256 and the hash of the password
is correct.

Thanks!

On Thu, Sep 15, 2022 at 2:07 PM Bogdan-Andrei Iancu
mailto:bog...@opensips.org>> wrote:

Hi,

In your opensips.cfg, when doing auth challenge to the end
points, do you specify the SHA256 alg?


https://opensips.org/html/docs/modules/3.2.x/auth.html#func_www_challenge



Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
   https://www.opensips-solutions.com  

OpenSIPS Summit 27-30 Sept 2022, Athens
   https://www.opensips.org/events/Summit-2022Athens/  


On 9/15/22 7:18 AM, jacky z wrote:

Hi Team,

Does ha1_sha256 work in general opensips config settings?
I have the following in the scripts:

modparam("auth_db", "calculate_ha1", 0)

modparam("auth_db", "password_column", "ha1_sha256")


but got the following error in the log:


/usr/sbin/opensips[28261]: ERROR:auth:auth_calc_HA1:
Incorrect length of pre-hashed credentials for the
algorithm "MD5": 32 expected, 64 provided


It seems though the sha256 was specified, but the server
still calculated MD5 and compared with the database
column ha1_sha256.


On Tue, Aug 9, 2022 at 5:39 PM Bogdan-Andrei Iancu
mailto:bog...@opensips.org>> wrote:

Hi Bela,

The OCP does not support ha1_sha256 AFAIK. Consider
opening a feature request here
https://github.com/OpenSIPS/opensips-cp/issues


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
   https://www.opensips-solutions.com  

OpenSIPS Summit 27-30 Sept 2022, Athens
   https://www.opensips.org/events/Summit-2022Athens/  


On 6/29/22 9:10 AM, Bela H wrote:


Hi all,

Is there any way to add new subscriber from OpenSIPS
CP 9.3.2 using password mode ha1_sha256?

The ha1 (MD5(username:realm:password)) works fine
but I had no luck with the value generation for the
ha1_sha256 field in “subscriber” table.

I have this setting:

modparam("auth_db", "calculate_ha1", 0)

modparam("auth_db", "password_column", "ha1_sha256")

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[mtck01]

Thank you, I managed to load the 'permissions module', and no more error,
but nothing happens, just stuck on "Sending to json:127.0.0.1:/mi :"
without error or successful confirmation.

 

Regards,

Martin

 

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[jacky z]

Correction on my comments. It is a client side issue. Thank you!

On Thu, Sep 15, 2022 at 3:40 PM jacky z  wrote:

> After checking the log in the client side, here are some interesting
> findings:
>
> Here is the what the client side received:
>
> WWW-Authenticate: Digest realm="sip.domain.com",
> nonce="3mKlesEwotxnM5nLMMLgQA63E6VTKsTFpEkK7OkoE4QA", qop="auth,auth-int",
> algorithm=SHA-256
>
> Then the client side logs show:
>
> 15:25:51.858   ...Unsupported digest algorithm "SHA-256"
> 15:25:51.859  SIP registration error: Invalid/unsupported digest
> algorithm
>
> Firstly, if the server side did not include SHA-256 in the SIP message,
> there would be no such issue. I don't understand why it needs to inform the
> client side "SHA-256". Secondly, if the client side just simply ignored
> "SHA-256", there would be no such issue. However, the client side treated
> it as not supported.
>
> On Thu, Sep 15, 2022 at 3:16 PM jacky z  wrote:
>
>> Hi Bogdan-Andrei,
>>
>> I tried either specifying it or not. Neither worked. Here is the script
>> when I tried:
>>
>> www_challenge("","auth,auth-int","SHA-256");
>>
>> I also tried specifying the realm in the above code. When the above is
>> used, there is no such error, but always returns 401. I checked the column
>> ha1_sha256 and the hash of the password is correct.
>>
>> Thanks!
>>
>> On Thu, Sep 15, 2022 at 2:07 PM Bogdan-Andrei Iancu 
>> wrote:
>>
>>> Hi,
>>>
>>> In your opensips.cfg, when doing auth challenge to the end points, do
>>> you specify the SHA256 alg?
>>>
>>> https://opensips.org/html/docs/modules/3.2.x/auth.html#func_www_challenge
>>>
>>> Regards,
>>>
>>> Bogdan-Andrei Iancu
>>>
>>> OpenSIPS Founder and Developer
>>>   https://www.opensips-solutions.com
>>> OpenSIPS Summit 27-30 Sept 2022, Athens
>>>   https://www.opensips.org/events/Summit-2022Athens/
>>>
>>> On 9/15/22 7:18 AM, jacky z wrote:
>>>
>>> Hi Team,
>>>
>>> Does ha1_sha256 work in general opensips config settings? I have the
>>> following in the scripts:
>>>
>>> modparam("auth_db", "calculate_ha1", 0)
>>>
>>> modparam("auth_db", "password_column", "ha1_sha256")
>>>
>>>
>>> but got the following error in the log:
>>>
>>>
>>> /usr/sbin/opensips[28261]: ERROR:auth:auth_calc_HA1: Incorrect length of
>>> pre-hashed credentials for the algorithm "MD5": 32 expected, 64 provided
>>>
>>>
>>> It seems though the sha256 was specified, but the server still
>>> calculated MD5 and compared with the database column ha1_sha256.
>>>
>>> On Tue, Aug 9, 2022 at 5:39 PM Bogdan-Andrei Iancu 
>>> wrote:
>>>
 Hi Bela,

 The OCP does not support ha1_sha256 AFAIK. Consider opening a feature
 request here https://github.com/OpenSIPS/opensips-cp/issues

 Regards,

 Bogdan-Andrei Iancu

 OpenSIPS Founder and Developer
   https://www.opensips-solutions.com
 OpenSIPS Summit 27-30 Sept 2022, Athens
   https://www.opensips.org/events/Summit-2022Athens/

 On 6/29/22 9:10 AM, Bela H wrote:

 Hi all,



 Is there any way to add new subscriber from OpenSIPS CP 9.3.2 using
 password mode ha1_sha256?

 The ha1 (MD5(username:realm:password)) works fine but I had no luck
 with the value generation for the ha1_sha256 field in “subscriber” table.



 I have this setting:

 modparam("auth_db", "calculate_ha1", 0)

 modparam("auth_db", "password_column", "ha1_sha256")



 Thanks!

 Bela




>>>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[jacky z]

After checking the log in the client side, here are some interesting
findings:

Here is the what the client side received:

WWW-Authenticate: Digest realm="sip.domain.com",
nonce="3mKlesEwotxnM5nLMMLgQA63E6VTKsTFpEkK7OkoE4QA", qop="auth,auth-int",
algorithm=SHA-256

Then the client side logs show:

15:25:51.858   ...Unsupported digest algorithm "SHA-256"
15:25:51.859  SIP registration error: Invalid/unsupported digest
algorithm

Firstly, if the server side did not include SHA-256 in the SIP message,
there would be no such issue. I don't understand why it needs to inform the
client side "SHA-256". Secondly, if the client side just simply ignored
"SHA-256", there would be no such issue. However, the client side treated
it as not supported.

On Thu, Sep 15, 2022 at 3:16 PM jacky z  wrote:

> Hi Bogdan-Andrei,
>
> I tried either specifying it or not. Neither worked. Here is the script
> when I tried:
>
> www_challenge("","auth,auth-int","SHA-256");
>
> I also tried specifying the realm in the above code. When the above is
> used, there is no such error, but always returns 401. I checked the column
> ha1_sha256 and the hash of the password is correct.
>
> Thanks!
>
> On Thu, Sep 15, 2022 at 2:07 PM Bogdan-Andrei Iancu 
> wrote:
>
>> Hi,
>>
>> In your opensips.cfg, when doing auth challenge to the end points, do you
>> specify the SHA256 alg?
>>
>> https://opensips.org/html/docs/modules/3.2.x/auth.html#func_www_challenge
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>>
>> OpenSIPS Founder and Developer
>>   https://www.opensips-solutions.com
>> OpenSIPS Summit 27-30 Sept 2022, Athens
>>   https://www.opensips.org/events/Summit-2022Athens/
>>
>> On 9/15/22 7:18 AM, jacky z wrote:
>>
>> Hi Team,
>>
>> Does ha1_sha256 work in general opensips config settings? I have the
>> following in the scripts:
>>
>> modparam("auth_db", "calculate_ha1", 0)
>>
>> modparam("auth_db", "password_column", "ha1_sha256")
>>
>>
>> but got the following error in the log:
>>
>>
>> /usr/sbin/opensips[28261]: ERROR:auth:auth_calc_HA1: Incorrect length of
>> pre-hashed credentials for the algorithm "MD5": 32 expected, 64 provided
>>
>>
>> It seems though the sha256 was specified, but the server still calculated
>> MD5 and compared with the database column ha1_sha256.
>>
>> On Tue, Aug 9, 2022 at 5:39 PM Bogdan-Andrei Iancu 
>> wrote:
>>
>>> Hi Bela,
>>>
>>> The OCP does not support ha1_sha256 AFAIK. Consider opening a feature
>>> request here https://github.com/OpenSIPS/opensips-cp/issues
>>>
>>> Regards,
>>>
>>> Bogdan-Andrei Iancu
>>>
>>> OpenSIPS Founder and Developer
>>>   https://www.opensips-solutions.com
>>> OpenSIPS Summit 27-30 Sept 2022, Athens
>>>   https://www.opensips.org/events/Summit-2022Athens/
>>>
>>> On 6/29/22 9:10 AM, Bela H wrote:
>>>
>>> Hi all,
>>>
>>>
>>>
>>> Is there any way to add new subscriber from OpenSIPS CP 9.3.2 using
>>> password mode ha1_sha256?
>>>
>>> The ha1 (MD5(username:realm:password)) works fine but I had no luck
>>> with the value generation for the ha1_sha256 field in “subscriber” table.
>>>
>>>
>>>
>>> I have this setting:
>>>
>>> modparam("auth_db", "calculate_ha1", 0)
>>>
>>> modparam("auth_db", "password_column", "ha1_sha256")
>>>
>>>
>>>
>>> Thanks!
>>>
>>> Bela
>>>
>>>
>>>
>>>
>>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[jacky z]

Hi Bogdan-Andrei,

I tried either specifying it or not. Neither worked. Here is the script
when I tried:

www_challenge("","auth,auth-int","SHA-256");

I also tried specifying the realm in the above code. When the above is
used, there is no such error, but always returns 401. I checked the column
ha1_sha256 and the hash of the password is correct.

Thanks!

On Thu, Sep 15, 2022 at 2:07 PM Bogdan-Andrei Iancu 
wrote:

> Hi,
>
> In your opensips.cfg, when doing auth challenge to the end points, do you
> specify the SHA256 alg?
>
> https://opensips.org/html/docs/modules/3.2.x/auth.html#func_www_challenge
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
>   https://www.opensips-solutions.com
> OpenSIPS Summit 27-30 Sept 2022, Athens
>   https://www.opensips.org/events/Summit-2022Athens/
>
> On 9/15/22 7:18 AM, jacky z wrote:
>
> Hi Team,
>
> Does ha1_sha256 work in general opensips config settings? I have the
> following in the scripts:
>
> modparam("auth_db", "calculate_ha1", 0)
>
> modparam("auth_db", "password_column", "ha1_sha256")
>
>
> but got the following error in the log:
>
>
> /usr/sbin/opensips[28261]: ERROR:auth:auth_calc_HA1: Incorrect length of
> pre-hashed credentials for the algorithm "MD5": 32 expected, 64 provided
>
>
> It seems though the sha256 was specified, but the server still calculated
> MD5 and compared with the database column ha1_sha256.
>
> On Tue, Aug 9, 2022 at 5:39 PM Bogdan-Andrei Iancu 
> wrote:
>
>> Hi Bela,
>>
>> The OCP does not support ha1_sha256 AFAIK. Consider opening a feature
>> request here https://github.com/OpenSIPS/opensips-cp/issues
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>>
>> OpenSIPS Founder and Developer
>>   https://www.opensips-solutions.com
>> OpenSIPS Summit 27-30 Sept 2022, Athens
>>   https://www.opensips.org/events/Summit-2022Athens/
>>
>> On 6/29/22 9:10 AM, Bela H wrote:
>>
>> Hi all,
>>
>>
>>
>> Is there any way to add new subscriber from OpenSIPS CP 9.3.2 using
>> password mode ha1_sha256?
>>
>> The ha1 (MD5(username:realm:password)) works fine but I had no luck with
>> the value generation for the ha1_sha256 field in “subscriber” table.
>>
>>
>>
>> I have this setting:
>>
>> modparam("auth_db", "calculate_ha1", 0)
>>
>> modparam("auth_db", "password_column", "ha1_sha256")
>>
>>
>>
>> Thanks!
>>
>> Bela
>>
>>
>>
>>
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[Bogdan-Andrei Iancu]

Hi,

In your opensips.cfg, when doing auth challenge to the end points, do 
you specify the SHA256 alg?


https://opensips.org/html/docs/modules/3.2.x/auth.html#func_www_challenge

Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
  https://www.opensips.org/events/Summit-2022Athens/

On 9/15/22 7:18 AM, jacky z wrote:

Hi Team,

Does ha1_sha256 work in general opensips config settings? I have the 
following in the scripts:


modparam("auth_db", "calculate_ha1", 0)

modparam("auth_db", "password_column", "ha1_sha256")


but got the following error in the log:


/usr/sbin/opensips[28261]: ERROR:auth:auth_calc_HA1: Incorrect length 
of pre-hashed credentials for the algorithm "MD5": 32 expected, 64 
provided



It seems though the sha256 was specified, but the server still 
calculated MD5 and compared with the database column ha1_sha256.



On Tue, Aug 9, 2022 at 5:39 PM Bogdan-Andrei Iancu 
mailto:bog...@opensips.org>> wrote:


Hi Bela,

The OCP does not support ha1_sha256 AFAIK. Consider opening a
feature request here
https://github.com/OpenSIPS/opensips-cp/issues


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
   https://www.opensips-solutions.com  
OpenSIPS Summit 27-30 Sept 2022, Athens
   https://www.opensips.org/events/Summit-2022Athens/  


On 6/29/22 9:10 AM, Bela H wrote:


Hi all,

Is there any way to add new subscriber from OpenSIPS CP 9.3.2
using password mode ha1_sha256?

The ha1 (MD5(username:realm:password)) works fine but I had no
luck with the value generation for the ha1_sha256 field in
“subscriber” table.

I have this setting:

modparam("auth_db", "calculate_ha1", 0)

modparam("auth_db", "password_column", "ha1_sha256")

Thanks!

Bela




___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[jacky z]

Hi Team,

Does ha1_sha256 work in general opensips config settings? I have the
following in the scripts:

modparam("auth_db", "calculate_ha1", 0)

modparam("auth_db", "password_column", "ha1_sha256")


but got the following error in the log:


/usr/sbin/opensips[28261]: ERROR:auth:auth_calc_HA1: Incorrect length of
pre-hashed credentials for the algorithm "MD5": 32 expected, 64 provided


It seems though the sha256 was specified, but the server still calculated
MD5 and compared with the database column ha1_sha256.

On Tue, Aug 9, 2022 at 5:39 PM Bogdan-Andrei Iancu 
wrote:

> Hi Bela,
>
> The OCP does not support ha1_sha256 AFAIK. Consider opening a feature
> request here https://github.com/OpenSIPS/opensips-cp/issues
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
>   https://www.opensips-solutions.com
> OpenSIPS Summit 27-30 Sept 2022, Athens
>   https://www.opensips.org/events/Summit-2022Athens/
>
> On 6/29/22 9:10 AM, Bela H wrote:
>
> Hi all,
>
>
>
> Is there any way to add new subscriber from OpenSIPS CP 9.3.2 using
> password mode ha1_sha256?
>
> The ha1 (MD5(username:realm:password)) works fine but I had no luck with
> the value generation for the ha1_sha256 field in “subscriber” table.
>
>
>
> I have this setting:
>
> modparam("auth_db", "calculate_ha1", 0)
>
> modparam("auth_db", "password_column", "ha1_sha256")
>
>
>
> Thanks!
>
> Bela
>
>
>
>
>
>
>
> ___
> Users mailing 
> listUsers@lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[mtck01]

Thank you so much and my apologies.

 

 

Regards,

Martin

 

From: Bogdan-Andrei Iancu  
Sent: Tuesday, September 13, 2022 8:49 AM
To: mtck01 ; users@lists.opensips.org
Subject: Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER"
produces error

 

Be sure you have in the opensips.cfg file the 
loadmodule "permissions.so"
line

PS: and please post to the list, not privately ;)

Regards,



Bogdan-Andrei Iancu
 
OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
  https://www.opensips.org/events/Summit-2022Athens/

On 9/13/22 3:31 PM, mtck01 wrote:

Hello, I am very new to OpenSIPS and have the same error.   I looked
everywhere but am still confused.  I installed all the modules but how do I
'load' the permissions module..?

 

Regards,

Martin

 

 

 

 

 
<https://www.mail-archive.com/search?l=users@lists.opensips.org=from:%22Bo
gdan%5C-Andrei+Iancu%22> Bogdan-Andrei Iancu
<https://www.mail-archive.com/search?l=users@lists.opensips.org=date:20210
721> Wed, 21 Jul 2021 23:59:41 -0700

Hi Jeff,
 

Are you sure the OpenSIPS (your CP is connected to ) has the permissions
module loaded ?

 
Regards,
 
Bogdan-Andrei Iancu
 
OpenSIPS Founder and Developer
   <https://www.opensips-solutions.com/> https://www.opensips-solutions.com
OpenSIPS Bootcamp 2021 online
   <https://opensips.org/training/OpenSIPS_eBootcamp_2021/>
https://opensips.org/training/OpenSIPS_eBootcamp_2021/
 
On 7/21/21 4:17 PM, Jeff Wilkie wrote:
Opensips 3.1.2
CP 8.3.1
Debian 10
 

When adding permissions, I hit "Reload on Server" but I get the following
error:

 

Sending to*json:127.0.0.1:/mi < <http://127.0.0.1:/mi>
http://127.0.0.1:/mi>*:MI command failed with code -32601 (Method not
found)

 
I

I don't get this error on any other page but this one when attempting to
"Reload on Server".  Is there something specifically wrong with this page
and how it uses the MI command structure?  Again, All other pages that use
the "Reload on Server" give a 200ok and work as expected.

 
Thanks,
 
Jeff
 
___
Users mailing list
Users@lists.opensips.org <mailto:Users@lists.opensips.org> 
 <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

 

 

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Bogdan-Andrei Iancu]

Be sure you have in the opensips.cfg file the
    loadmodule "permissions.so"
line

PS: and please post to the list, not privately ;)

Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
  https://www.opensips.org/events/Summit-2022Athens/

On 9/13/22 3:31 PM, mtck01 wrote:


Hello, I am very new to OpenSIPS and have the same error.   I looked 
everywhere but am still confused.  I installed all the modules but how 
do I ‘load’ the permissions module..?


Regards,

Martin

Bogdan-Andrei Iancu 
Wed, 
21 Jul 2021 23:59:41 -0700 



Hi Jeff,

Are you sure the OpenSIPS (your CP is connected to ) has the 
permissions module loaded ?


Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com 
OpenSIPS Bootcamp 2021 online
https://opensips.org/training/OpenSIPS_eBootcamp_2021/ 


On 7/21/21 4:17 PM, Jeff Wilkie wrote:
Opensips 3.1.2
CP 8.3.1
Debian 10

When adding permissions, I hit "Reload on Server" but I get 
the following error:


Sending to*json:127.0.0.1:/mi >*:MI command failed with code -32601 
(Method not found)


I

I don't get this error on any other page but this one 
when attempting to "Reload on Server".  Is there something 
specifically wrong with this page and how it uses the MI command 
structure?  Again, All other pages that use the "Reload on Server" 
give a 200ok and work as expected.


Thanks,
Jeff
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users 





___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[Bogdan-Andrei Iancu]

Hi Bela,

The OCP does not support ha1_sha256 AFAIK. Consider opening a feature 
request here https://github.com/OpenSIPS/opensips-cp/issues


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Summit 27-30 Sept 2022, Athens
  https://www.opensips.org/events/Summit-2022Athens/

On 6/29/22 9:10 AM, Bela H wrote:


Hi all,

Is there any way to add new subscriber from OpenSIPS CP 9.3.2 using 
password mode ha1_sha256?


The ha1 (MD5(username:realm:password)) works fine but I had no luck 
with the value generation for the ha1_sha256 field in “subscriber” table.


I have this setting:

modparam("auth_db", "calculate_ha1", 0)

modparam("auth_db", "password_column", "ha1_sha256")

Thanks!

Bela


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] OpenSIPS CP 9.3.2 password mode ha1_sha256 for adding new user

[Bela H]

Hi all,

Is there any way to add new subscriber from OpenSIPS CP 9.3.2 using password 
mode ha1_sha256?
The ha1 (MD5(username:realm:password)) works fine but I had no luck with the 
value generation for the ha1_sha256 field in “subscriber” table.

I have this setting:
modparam("auth_db", "calculate_ha1", 0)
modparam("auth_db", "password_column", "ha1_sha256")

Thanks!
Bela



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Hi Daniel,

I went other direction as well with the troubleshooting: asked my colleague to 
check the behavior of CP from the office environment since I work from home. 
This is really odd but works fine from there with the same browser!
That means nothing wrong with the CP 9.3.2.
Thanks for your help on this and really sorry to waste your time!

Please let me know if you have further update on the CDR exporting function.

Cheers,
Bela

From: Daniel Airinei<mailto:daniel.airi...@opensips.org>
Sent: Thursday, 9 June 2022 12:55
To: OpenSIPS users mailling list<mailto:users@lists.opensips.org>; Bela 
H<mailto:hob...@hotmail.com>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2


It is unexpected that only some tools have the gear button. Could you also 
quickly check that the files (these are two other files that are involved in 
displaying the button):

opensips-cp/config/tools/system/cdrviewer/settings.inc.php

opensips-cp/config/modules.inc.php

look like the files here:

https://github.com/OpenSIPS/opensips-cp/blob/master/config/tools/system/cdrviewer/settings.inc.php

https://github.com/OpenSIPS/opensips-cp/blob/master/config/modules.inc.php

I don't see any reason why they wouldn't match, but it's worth double checking 
before debugging.

Let me know  and I will get back to you with the next steps if this is not the 
problem.

Cheers,
Daniel Airinei

https://www.opensips-solutions.com/<http://www.opensips-solutions.com/>


On 6/9/2022 3:20 AM, Bela H wrote:
Hi Daniel,

Thanks for your quick feedback!
The local.inc.php related explanation is clear now.

I am using Firefox browser.

I can confirm the opensips-cp/web/tools/system/cdrviewer/template/menu.php has 
the following:


As I mentioned in my original mail, the /Users/Alias Management menu has the 
gear icon.  Compared that menu.php file with the cdrviewer menu.php and are 
identical apart from the obvious "System / CDR Viewer / " part.

I have only one user defined for CP, admin that is with “admin” access to 
everything. However, if I change the access to “read-only” for Alias Management 
I still see the gear icon and even able to modify e.g. the result per page 
value from the gear icon setting.

Can you please advise how to get any error log for this issue! Syslog does not 
show anything.

Cheers,
Bela

From: Daniel Airinei<mailto:daniel.airi...@opensips.org>
Sent: Thursday, 9 June 2022 11:40
To: OpenSIPS users mailling list<mailto:users@lists.opensips.org>; Bela 
H<mailto:hob...@hotmail.com>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2


Hi Bela,

Thanks for reaching out. CP 9.3.2 does not use local.inc.php files anymore, you 
should use the settings interface for additional CDR fields (the one accessed 
through the gear button we are talking about). Could you access any tool in the 
CP and then send me the error log? What browser are you using? Could you check, 
for example, the file

opensips-cp/web/tools/system/cdrviewer/template/menu.php

and make sure that line 28 is "display_settings_button()"? (which is the 
function that displays the gear button).

Regarding exporting, I have indeed found some issues and they will be fixed as 
soon as possible.

Additionally, you have mentioned in an earlier mail that you see extra fields 
from local.inc.php in the details tab, but not in the CDR viewer panel. That is 
probably because those fields were still in your database, and the details tab 
fetches all fields directly, whereas in the CDR viewer panel, you will see only 
the fields you have configured through the gear button settings interface (so 
no extra fields in your case). But local.inc.php files for tools are not used 
in CP 9.3.2, all their content is now managed through the settings interface.

Don't hesitate to follow up,

Kind regards,

Daniel Airinei
http://www.opensips-solutions.com/
On 6/9/2022 2:00 AM, Bela H wrote:
Hi Daniel,

I have installed the CP 9.3.2 and it still looks the same: no gear icon.
I can confirm the opensips-cp/config/globals.php file indentical to the GitHub 
one:

$config->permissions = array("read-only","read-write","admin");

// Password can be saved in plain text mode by setting
// $config->admin_passwd_mode to 0 or chyphered mode, by setting it to 1
$config->admin_passwd_mode=1;

One more question: is the /cdrviewer/local.inc.php config used at all? In the 
CP 8.3.2 I modified that one for additional CDR fields but CP 9.3.2 uses the 
settings.inc.php file.

And also I found an additional problem: CDR exporting does not work, the 
exported file is empty.

Thanks for your help!
Cheers,
Bela


From: Daniel Airinei<mailto:daniel.airi...@opensips.org>
Sent: Wednesday, 8 June 2022 01:30
To: OpenSIPS users mailling list<mailto:users@lists.opensips.org>; Răzvan 
Crainea<mailto:raz...@opensips.org>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hell

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Daniel Airinei]

It is unexpected that only some tools have the gear button. Could you 
also quickly check that the files (these are two other files that are 
involved in displaying the button):


opensips-cp/config/tools/system/cdrviewer/settings.inc.php

opensips-cp/config/modules.inc.php

look like the files here:

https://github.com/OpenSIPS/opensips-cp/blob/master/config/tools/system/cdrviewer/settings.inc.php

https://github.com/OpenSIPS/opensips-cp/blob/master/config/modules.inc.php

I don't see any reason why they wouldn't match, but it's worth double 
checking before debugging.


Let me know  and I will get back to you with the next steps if this is 
not the problem.


Cheers,

Daniel Airinei

https://www.opensips-solutions.com/


On 6/9/2022 3:20 AM, Bela H wrote:


Hi Daniel,

Thanks for your quick feedback!

The local.inc.php related explanation is clear now.

I am using Firefox browser.

I can confirm the 
opensips-cp/web/tools/system/cdrviewer/template/menu.php has the 
following:


    

As I mentioned in my original mail, the /Users/Alias Management menu 
has the gear icon.  Compared that menu.php file with the cdrviewer 
menu.php and are identical apart from the obvious "System / CDR Viewer 
/ " part.


I have only one user defined for CP, admin that is with “admin” access 
to everything. However, if I change the access to “read-only” for 
Alias Management I still see the gear icon and even able to modify 
e.g. the result per page value from the gear icon setting.


Can you please advise how to get any error log for this issue! Syslog 
does not show anything.


Cheers,

Bela

*From: *Daniel Airinei <mailto:daniel.airi...@opensips.org>
*Sent: *Thursday, 9 June 2022 11:40
*To: *OpenSIPS users mailling list <mailto:users@lists.opensips.org>; 
Bela H <mailto:hob...@hotmail.com>

*Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hi Bela,

Thanks for reaching out. CP 9.3.2 does not use local.inc.php files 
anymore, you should use the settings interface for additional CDR 
fields (the one accessed through the gear button we are talking 
about). Could you access any tool in the CP and then send me the error 
log? What browser are you using? Could you check, for example, the file


opensips-cp/web/tools/system/cdrviewer/template/menu.php

and make sure that line 28 is "display_settings_button()"? (which is 
the function that displays the gear button).


Regarding exporting, I have indeed found some issues and they will be 
fixed as soon as possible.


Additionally, you have mentioned in an earlier mail that you see extra 
fields from local.inc.php in the details tab, but not in the CDR 
viewer panel. That is probably because those fields were still in your 
database, and the details tab fetches all fields directly, whereas in 
the CDR viewer panel, you will see only the fields you have configured 
through the gear button settings interface (so no extra fields in your 
case). But local.inc.php files for tools are *not *used in CP 9.3.2, 
all their content is now managed through the settings interface.


Don't hesitate to follow up,

Kind regards,

Daniel Airinei
http://www.opensips-solutions.com/

On 6/9/2022 2:00 AM, Bela H wrote:

Hi Daniel,

I have installed the CP 9.3.2 and it still looks the same: no gear
icon.

I can confirm the opensips-cp/config/globals.php file indentical
to the GitHub one:

$config->permissions = array("read-only","read-write","admin");

// Password can be saved in plain text mode by setting

// $config->admin_passwd_mode to 0 or chyphered mode, by setting
it to 1

$config->admin_passwd_mode=1;

One more question: is the /cdrviewer/local.inc.php config used at
all? In the CP 8.3.2 I modified that one for additional CDR fields
but CP 9.3.2 uses the settings.inc.php file.

And also I found an additional problem: CDR exporting does not
work, the exported file is empty.

Thanks for your help!

Cheers,

Bela

*From: *Daniel Airinei <mailto:daniel.airi...@opensips.org>
*Sent: *Wednesday, 8 June 2022 01:30
*To: *OpenSIPS users mailling list
<mailto:users@lists.opensips.org>; Răzvan Crainea
<mailto:raz...@opensips.org>
*Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hello Bela,

If you are interested in upgrading to 9.3.2, I'd be happy to
assist you
with any issues you might encounter (I reworked most of the new
settings
feature). Regarding your gear button problem, you could first
check the
permissions in the opensips-cp/config/globals.php file, and make sure
they look like the ones here:
https://github.com/OpenSIPS/opensips-cp/blob/master/config/globals.php

If they look the same, or if you have any additional problems, please
let me know and I will help you out.

Regards,

Daniel Airinei
http://www.opensips-solutions.

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Hi Daniel,

Thanks for your quick feedback!
The local.inc.php related explanation is clear now.

I am using Firefox browser.

I can confirm the opensips-cp/web/tools/system/cdrviewer/template/menu.php has 
the following:


As I mentioned in my original mail, the /Users/Alias Management menu has the 
gear icon.  Compared that menu.php file with the cdrviewer menu.php and are 
identical apart from the obvious "System / CDR Viewer / " part.

I have only one user defined for CP, admin that is with “admin” access to 
everything. However, if I change the access to “read-only” for Alias Management 
I still see the gear icon and even able to modify e.g. the result per page 
value from the gear icon setting.

Can you please advise how to get any error log for this issue! Syslog does not 
show anything.

Cheers,
Bela

From: Daniel Airinei<mailto:daniel.airi...@opensips.org>
Sent: Thursday, 9 June 2022 11:40
To: OpenSIPS users mailling list<mailto:users@lists.opensips.org>; Bela 
H<mailto:hob...@hotmail.com>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2


Hi Bela,

Thanks for reaching out. CP 9.3.2 does not use local.inc.php files anymore, you 
should use the settings interface for additional CDR fields (the one accessed 
through the gear button we are talking about). Could you access any tool in the 
CP and then send me the error log? What browser are you using? Could you check, 
for example, the file

opensips-cp/web/tools/system/cdrviewer/template/menu.php

and make sure that line 28 is "display_settings_button()"? (which is the 
function that displays the gear button).

Regarding exporting, I have indeed found some issues and they will be fixed as 
soon as possible.

Additionally, you have mentioned in an earlier mail that you see extra fields 
from local.inc.php in the details tab, but not in the CDR viewer panel. That is 
probably because those fields were still in your database, and the details tab 
fetches all fields directly, whereas in the CDR viewer panel, you will see only 
the fields you have configured through the gear button settings interface (so 
no extra fields in your case). But local.inc.php files for tools are not used 
in CP 9.3.2, all their content is now managed through the settings interface.

Don't hesitate to follow up,

Kind regards,

Daniel Airinei
http://www.opensips-solutions.com/
On 6/9/2022 2:00 AM, Bela H wrote:
Hi Daniel,

I have installed the CP 9.3.2 and it still looks the same: no gear icon.
I can confirm the opensips-cp/config/globals.php file indentical to the GitHub 
one:

$config->permissions = array("read-only","read-write","admin");

// Password can be saved in plain text mode by setting
// $config->admin_passwd_mode to 0 or chyphered mode, by setting it to 1
$config->admin_passwd_mode=1;

One more question: is the /cdrviewer/local.inc.php config used at all? In the 
CP 8.3.2 I modified that one for additional CDR fields but CP 9.3.2 uses the 
settings.inc.php file.

And also I found an additional problem: CDR exporting does not work, the 
exported file is empty.

Thanks for your help!
Cheers,
Bela


From: Daniel Airinei<mailto:daniel.airi...@opensips.org>
Sent: Wednesday, 8 June 2022 01:30
To: OpenSIPS users mailling list<mailto:users@lists.opensips.org>; Răzvan 
Crainea<mailto:raz...@opensips.org>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hello Bela,

If you are interested in upgrading to 9.3.2, I'd be happy to assist you
with any issues you might encounter (I reworked most of the new settings
feature). Regarding your gear button problem, you could first check the
permissions in the opensips-cp/config/globals.php file, and make sure
they look like the ones here:
https://github.com/OpenSIPS/opensips-cp/blob/master/config/globals.php

If they look the same, or if you have any additional problems, please
let me know and I will help you out.

Regards,

Daniel Airinei
http://www.opensips-solutions.com

On 6/7/2022 1:32 PM, Răzvan Crainea wrote:
> Well, this depends on the way you had set up your call forwarding
> feature in OpenSIPS. But since most likely this is a custom handling,
> in a custom table, you will have better experience if you are using
> the tviewer tool în 9.3.2. So the answer is yes, it is worth upgrading
> :).
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 6/7/22 11:44, Bela H wrote:
>> Hi Răzvan,
>>
>> Unfortunately there was no luck, I rolled it back.
>>
>> However, I am not sure if this latest 9.3.2 version has the feature I
>> was hoping for.
>>
>> Is there an “easy” way to configure this new CP GUI for call
>> forwarding management? Currently I set up/modify directly in the DB.
>>
>> Cheers,
>>
>> Bela
>>
>> *From: *Răzvan Crainea <

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Daniel Airinei]

Hi Bela,

Thanks for reaching out. CP 9.3.2 does not use local.inc.php files 
anymore, you should use the settings interface for additional CDR fields 
(the one accessed through the gear button we are talking about). Could 
you access any tool in the CP and then send me the error log? What 
browser are you using? Could you check, for example, the file


opensips-cp/web/tools/system/cdrviewer/template/menu.php

and make sure that line 28 is "display_settings_button()"? (which is the 
function that displays the gear button).


Regarding exporting, I have indeed found some issues and they will be 
fixed as soon as possible.


Additionally, you have mentioned in an earlier mail that you see extra 
fields from local.inc.php in the details tab, but not in the CDR viewer 
panel. That is probably because those fields were still in your 
database, and the details tab fetches all fields directly, whereas in 
the CDR viewer panel, you will see only the fields you have configured 
through the gear button settings interface (so no extra fields in your 
case). But local.inc.php files for tools are *not***used in CP 9.3.2, 
all their content is now managed through the settings interface.


Don't hesitate to follow up,

Kind regards,

Daniel Airinei
http://www.opensips-solutions.com/

On 6/9/2022 2:00 AM, Bela H wrote:


Hi Daniel,

I have installed the CP 9.3.2 and it still looks the same: no gear icon.

I can confirm the opensips-cp/config/globals.php file indentical to 
the GitHub one:


$config->permissions = array("read-only","read-write","admin");

// Password can be saved in plain text mode by setting

// $config->admin_passwd_mode to 0 or chyphered mode, by setting it to 1

$config->admin_passwd_mode=1;

One more question: is the /cdrviewer/local.inc.php config used at all? 
In the CP 8.3.2 I modified that one for additional CDR fields but CP 
9.3.2 uses the settings.inc.php file.


And also I found an additional problem: CDR exporting does not work, 
the exported file is empty.


Thanks for your help!

Cheers,

Bela

*From: *Daniel Airinei <mailto:daniel.airi...@opensips.org>
*Sent: *Wednesday, 8 June 2022 01:30
*To: *OpenSIPS users mailling list <mailto:users@lists.opensips.org>; 
Răzvan Crainea <mailto:raz...@opensips.org>

*Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hello Bela,

If you are interested in upgrading to 9.3.2, I'd be happy to assist you
with any issues you might encounter (I reworked most of the new settings
feature). Regarding your gear button problem, you could first check the
permissions in the opensips-cp/config/globals.php file, and make sure
they look like the ones here:
https://github.com/OpenSIPS/opensips-cp/blob/master/config/globals.php

If they look the same, or if you have any additional problems, please
let me know and I will help you out.

Regards,

Daniel Airinei
http://www.opensips-solutions.com

On 6/7/2022 1:32 PM, Răzvan Crainea wrote:
> Well, this depends on the way you had set up your call forwarding
> feature in OpenSIPS. But since most likely this is a custom handling,
> in a custom table, you will have better experience if you are using
> the tviewer tool în 9.3.2. So the answer is yes, it is worth upgrading
> :).
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 6/7/22 11:44, Bela H wrote:
>> Hi Răzvan,
>>
>> Unfortunately there was no luck, I rolled it back.
>>
>> However, I am not sure if this latest 9.3.2 version has the feature I
>> was hoping for.
>>
>> Is there an “easy” way to configure this new CP GUI for call
>> forwarding management? Currently I set up/modify directly in the DB.
>>
>> Cheers,
>>
>> Bela
>>
>> *From: *Răzvan Crainea <mailto:raz...@opensips.org 
<mailto:raz...@opensips.org>>

>> *Sent: *Tuesday, 7 June 2022 20:36
>> *To: *users@lists.opensips.org <mailto:users@lists.opensips.org 
<mailto:users@lists.opensips.org>>

>> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
>>
>> Hi, Bela!
>>
>> Did you manage to sort this out? If not, perhaps Daniel, the guy who
>> reworked the settings feature might be able to help you out.
>>
>> Best regards,
>>
>> Răzvan Crainea
>> OpenSIPS Core Developer
>> http://www.opensips-solutions.com <http://www.opensips-solutions.com>
>>
>> On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:
>>  > Hi Bela,
>>  >
>>  > OK, be sure the user you are using to log into CP has the "admin"
>>  > permission on the cdrviewer tool . Check this via the Admin tools
>> -> Access.
>>  >
>>  > Regards,
>>  >
>>  > Bogdan-Andrei Iancu
>>  >
&

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Hi Daniel,

I have installed the CP 9.3.2 and it still looks the same: no gear icon.
I can confirm the opensips-cp/config/globals.php file indentical to the GitHub 
one:

$config->permissions = array("read-only","read-write","admin");

// Password can be saved in plain text mode by setting
// $config->admin_passwd_mode to 0 or chyphered mode, by setting it to 1
$config->admin_passwd_mode=1;

One more question: is the /cdrviewer/local.inc.php config used at all? In the 
CP 8.3.2 I modified that one for additional CDR fields but CP 9.3.2 uses the 
settings.inc.php file.

And also I found an additional problem: CDR exporting does not work, the 
exported file is empty.

Thanks for your help!
Cheers,
Bela


From: Daniel Airinei<mailto:daniel.airi...@opensips.org>
Sent: Wednesday, 8 June 2022 01:30
To: OpenSIPS users mailling list<mailto:users@lists.opensips.org>; Răzvan 
Crainea<mailto:raz...@opensips.org>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hello Bela,

If you are interested in upgrading to 9.3.2, I'd be happy to assist you
with any issues you might encounter (I reworked most of the new settings
feature). Regarding your gear button problem, you could first check the
permissions in the opensips-cp/config/globals.php file, and make sure
they look like the ones here:
https://github.com/OpenSIPS/opensips-cp/blob/master/config/globals.php

If they look the same, or if you have any additional problems, please
let me know and I will help you out.

Regards,

Daniel Airinei
http://www.opensips-solutions.com

On 6/7/2022 1:32 PM, Răzvan Crainea wrote:
> Well, this depends on the way you had set up your call forwarding
> feature in OpenSIPS. But since most likely this is a custom handling,
> in a custom table, you will have better experience if you are using
> the tviewer tool în 9.3.2. So the answer is yes, it is worth upgrading
> :).
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 6/7/22 11:44, Bela H wrote:
>> Hi Răzvan,
>>
>> Unfortunately there was no luck, I rolled it back.
>>
>> However, I am not sure if this latest 9.3.2 version has the feature I
>> was hoping for.
>>
>> Is there an “easy” way to configure this new CP GUI for call
>> forwarding management? Currently I set up/modify directly in the DB.
>>
>> Cheers,
>>
>> Bela
>>
>> *From: *Răzvan Crainea <mailto:raz...@opensips.org>
>> *Sent: *Tuesday, 7 June 2022 20:36
>> *To: *users@lists.opensips.org <mailto:users@lists.opensips.org>
>> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
>>
>> Hi, Bela!
>>
>> Did you manage to sort this out? If not, perhaps Daniel, the guy who
>> reworked the settings feature might be able to help you out.
>>
>> Best regards,
>>
>> Răzvan Crainea
>> OpenSIPS Core Developer
>> http://www.opensips-solutions.com <http://www.opensips-solutions.com>
>>
>> On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:
>>  > Hi Bela,
>>  >
>>  > OK, be sure the user you are using to log into CP has the "admin"
>>  > permission on the cdrviewer tool . Check this via the Admin tools
>> -> Access.
>>  >
>>  > Regards,
>>  >
>>  > Bogdan-Andrei Iancu
>>  >
>>  > OpenSIPS Founder and Developer
>>  > https://www.opensips-solutions.com
>> <https://www.opensips-solutions.com>
>>  > OpenSIPS eBootcamp 23rd May - 3rd June 2022
>>  > https://opensips.org/training/OpenSIPS_eBootcamp_2022/
>> <https://opensips.org/training/OpenSIPS_eBootcamp_2022/>
>>  >
>>  > On 5/18/22 12:25 AM, Bela H wrote:
>>  >>
>>  >> Hi Bogdan,
>>  >>
>>  >> I have re-installed the CP 9.3.2 but the results are same. Still
>>  >> missing CDR fields in the CDR Viewer and no gear icon anywhere only
>>  >> Users/Alias Management and System/Monit.
>>  >>
>>  >> However, in the CDR details I can see the additional fields:
>>  >>
>>  >> What did I wrong?
>>  >>
>>  >> Cheers,
>>  >>
>>  >> Bela
>>  >>
>>  >> *From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org
>> <mailto:bog...@opensips.org>>
>>  >> *Sent: *Wednesday, 18 May 2022 03:01
>>  >> *To: *OpenSIPS users mailling list
>> <mailto:Users@lists.opensips.org <mailto:Users@lists.opensips.org>>;
>>  >> Bela H <mailto:hob...@hotmail.com <mailto:hob...@hotmail.com>>
>>  >> *Subject: *Re: [OpenSIPS-User

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Thanks Daniel!

I’ll upgrade again hopefully this Friday and will get back to you with the 
findings.

Cheers,
Bela

From: Daniel Airinei<mailto:daniel.airi...@opensips.org>
Sent: Wednesday, 8 June 2022 01:30
To: OpenSIPS users mailling list<mailto:users@lists.opensips.org>; Răzvan 
Crainea<mailto:raz...@opensips.org>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hello Bela,

If you are interested in upgrading to 9.3.2, I'd be happy to assist you
with any issues you might encounter (I reworked most of the new settings
feature). Regarding your gear button problem, you could first check the
permissions in the opensips-cp/config/globals.php file, and make sure
they look like the ones here:
https://github.com/OpenSIPS/opensips-cp/blob/master/config/globals.php

If they look the same, or if you have any additional problems, please
let me know and I will help you out.

Regards,

Daniel Airinei
http://www.opensips-solutions.com

On 6/7/2022 1:32 PM, Răzvan Crainea wrote:
> Well, this depends on the way you had set up your call forwarding
> feature in OpenSIPS. But since most likely this is a custom handling,
> in a custom table, you will have better experience if you are using
> the tviewer tool în 9.3.2. So the answer is yes, it is worth upgrading
> :).
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 6/7/22 11:44, Bela H wrote:
>> Hi Răzvan,
>>
>> Unfortunately there was no luck, I rolled it back.
>>
>> However, I am not sure if this latest 9.3.2 version has the feature I
>> was hoping for.
>>
>> Is there an “easy” way to configure this new CP GUI for call
>> forwarding management? Currently I set up/modify directly in the DB.
>>
>> Cheers,
>>
>> Bela
>>
>> *From: *Răzvan Crainea <mailto:raz...@opensips.org>
>> *Sent: *Tuesday, 7 June 2022 20:36
>> *To: *users@lists.opensips.org <mailto:users@lists.opensips.org>
>> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
>>
>> Hi, Bela!
>>
>> Did you manage to sort this out? If not, perhaps Daniel, the guy who
>> reworked the settings feature might be able to help you out.
>>
>> Best regards,
>>
>> Răzvan Crainea
>> OpenSIPS Core Developer
>> http://www.opensips-solutions.com <http://www.opensips-solutions.com>
>>
>> On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:
>>  > Hi Bela,
>>  >
>>  > OK, be sure the user you are using to log into CP has the "admin"
>>  > permission on the cdrviewer tool . Check this via the Admin tools
>> -> Access.
>>  >
>>  > Regards,
>>  >
>>  > Bogdan-Andrei Iancu
>>  >
>>  > OpenSIPS Founder and Developer
>>  > https://www.opensips-solutions.com
>> <https://www.opensips-solutions.com>
>>  > OpenSIPS eBootcamp 23rd May - 3rd June 2022
>>  > https://opensips.org/training/OpenSIPS_eBootcamp_2022/
>> <https://opensips.org/training/OpenSIPS_eBootcamp_2022/>
>>  >
>>  > On 5/18/22 12:25 AM, Bela H wrote:
>>  >>
>>  >> Hi Bogdan,
>>  >>
>>  >> I have re-installed the CP 9.3.2 but the results are same. Still
>>  >> missing CDR fields in the CDR Viewer and no gear icon anywhere only
>>  >> Users/Alias Management and System/Monit.
>>  >>
>>  >> However, in the CDR details I can see the additional fields:
>>  >>
>>  >> What did I wrong?
>>  >>
>>  >> Cheers,
>>  >>
>>  >> Bela
>>  >>
>>  >> *From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org
>> <mailto:bog...@opensips.org>>
>>  >> *Sent: *Wednesday, 18 May 2022 03:01
>>  >> *To: *OpenSIPS users mailling list
>> <mailto:Users@lists.opensips.org <mailto:Users@lists.opensips.org>>;
>>  >> Bela H <mailto:hob...@hotmail.com <mailto:hob...@hotmail.com>>
>>  >> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
>>  >>
>>  >> Hi Bela,
>>  >>
>>  >> Does you CDRviewer look like this ?
>>  >>
>>  >>
>>  >>
>>  >> See the gear box in the right upper corner.
>>  >>
>>  >> And be sure that the 9.3.2 version is indeed displayed in the left
>>  >> upper corner.
>>  >>
>>  >> Regards,
>>  >>
>>  >> Bogdan-Andrei Iancu
>>  >> OpenSIPS Founder and Developer
>>  >> https://www.opensips-solutions.com
>> &l

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Thanks Răzvan!

I am using the usr_preferences preferences table for call forwarding setup, 
like this:
+++--++---+--+-+-+
| id | uuid   | username | domain | attribute | type | value   | 
last_modified   |
+++--++---+--+-+-+
| 23 | B_num ||| fwdnoansw|0| C_num 
   | 2022-04-11 16:46:40 |


Cheers,
Bela

From: Răzvan Crainea<mailto:raz...@opensips.org>
Sent: Tuesday, 7 June 2022 22:36
To: users@lists.opensips.org<mailto:users@lists.opensips.org>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Well, this depends on the way you had set up your call forwarding
feature in OpenSIPS. But since most likely this is a custom handling, in
a custom table, you will have better experience if you are using the
tviewer tool în 9.3.2. So the answer is yes, it is worth upgrading :).

Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 6/7/22 11:44, Bela H wrote:
> Hi Răzvan,
>
> Unfortunately there was no luck, I rolled it back.
>
> However, I am not sure if this latest 9.3.2 version has the feature I
> was hoping for.
>
> Is there an “easy” way to configure this new CP GUI for call forwarding
> management? Currently I set up/modify directly in the DB.
>
> Cheers,
>
> Bela
>
> *From: *Răzvan Crainea <mailto:raz...@opensips.org>
> *Sent: *Tuesday, 7 June 2022 20:36
> *To: *users@lists.opensips.org <mailto:users@lists.opensips.org>
> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
>
> Hi, Bela!
>
> Did you manage to sort this out? If not, perhaps Daniel, the guy who
> reworked the settings feature might be able to help you out.
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com <http://www.opensips-solutions.com>
>
> On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:
>  > Hi Bela,
>  >
>  > OK, be sure the user you are using to log into CP has the "admin"
>  > permission on the cdrviewer tool . Check this via the Admin tools ->
> Access.
>  >
>  > Regards,
>  >
>  > Bogdan-Andrei Iancu
>  >
>  > OpenSIPS Founder and Developer
>  > https://www.opensips-solutions.com <https://www.opensips-solutions.com>
>  > OpenSIPS eBootcamp 23rd May - 3rd June 2022
>  > https://opensips.org/training/OpenSIPS_eBootcamp_2022/
> <https://opensips.org/training/OpenSIPS_eBootcamp_2022/>
>  >
>  > On 5/18/22 12:25 AM, Bela H wrote:
>  >>
>  >> Hi Bogdan,
>  >>
>  >> I have re-installed the CP 9.3.2 but the results are same. Still
>  >> missing CDR fields in the CDR Viewer and no gear icon anywhere only
>  >> Users/Alias Management and System/Monit.
>  >>
>  >> However, in the CDR details I can see the additional fields:
>  >>
>  >> What did I wrong?
>  >>
>  >> Cheers,
>  >>
>  >> Bela
>  >>
>  >> *From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org
> <mailto:bog...@opensips.org>>
>  >> *Sent: *Wednesday, 18 May 2022 03:01
>  >> *To: *OpenSIPS users mailling list <mailto:Users@lists.opensips.org
> <mailto:Users@lists.opensips.org>>;
>  >> Bela H <mailto:hob...@hotmail.com <mailto:hob...@hotmail.com>>
>  >> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
>  >>
>  >> Hi Bela,
>  >>
>  >> Does you CDRviewer look like this ?
>  >>
>  >>
>  >>
>  >> See the gear box in the right upper corner.
>  >>
>  >> And be sure that the 9.3.2 version is indeed displayed in the left
>  >> upper corner.
>  >>
>  >> Regards,
>  >>
>  >> Bogdan-Andrei Iancu
>  >> OpenSIPS Founder and Developer
>  >> https://www.opensips-solutions.com
> <https://www.opensips-solutions.com>
> <https://www.opensips-solutions.com <https://www.opensips-solutions.com>>
>  >> OpenSIPS eBootcamp 23rd May - 3rd June 2022
>  >> https://opensips.org/training/OpenSIPS_eBootcamp_2022/
> <https://opensips.org/training/OpenSIPS_eBootcamp_2022/>
> <https://opensips.org/training/OpenSIPS_eBootcamp_2022/
> <https://opensips.org/training/OpenSIPS_eBootcamp_2022/>>
>  >>
>  >> On 5/17/22 10:55 AM, Bela H wrote:
>  >>
>  >> Hello,
>  >>
>  >> What is the best method to upgrade the control panel from 8.3.2 to
>  >> 9

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Daniel Airinei]

Hello Bela,

If you are interested in upgrading to 9.3.2, I'd be happy to assist you 
with any issues you might encounter (I reworked most of the new settings 
feature). Regarding your gear button problem, you could first check the 
permissions in the opensips-cp/config/globals.php file, and make sure 
they look like the ones here: 
https://github.com/OpenSIPS/opensips-cp/blob/master/config/globals.php


If they look the same, or if you have any additional problems, please 
let me know and I will help you out.


Regards,

Daniel Airinei
http://www.opensips-solutions.com

On 6/7/2022 1:32 PM, Răzvan Crainea wrote:
Well, this depends on the way you had set up your call forwarding 
feature in OpenSIPS. But since most likely this is a custom handling, 
in a custom table, you will have better experience if you are using 
the tviewer tool în 9.3.2. So the answer is yes, it is worth upgrading 
:).


Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 6/7/22 11:44, Bela H wrote:

Hi Răzvan,

Unfortunately there was no luck, I rolled it back.

However, I am not sure if this latest 9.3.2 version has the feature I 
was hoping for.


Is there an “easy” way to configure this new CP GUI for call 
forwarding management? Currently I set up/modify directly in the DB.


Cheers,

Bela

*From: *Răzvan Crainea <mailto:raz...@opensips.org>
*Sent: *Tuesday, 7 June 2022 20:36
*To: *users@lists.opensips.org <mailto:users@lists.opensips.org>
*Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hi, Bela!

Did you manage to sort this out? If not, perhaps Daniel, the guy who
reworked the settings feature might be able to help you out.

Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com <http://www.opensips-solutions.com>

On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:
 > Hi Bela,
 >
 > OK, be sure the user you are using to log into CP has the "admin"
 > permission on the cdrviewer tool . Check this via the Admin tools 
-> Access.

 >
 > Regards,
 >
 > Bogdan-Andrei Iancu
 >
 > OpenSIPS Founder and Developer
 > https://www.opensips-solutions.com 
<https://www.opensips-solutions.com>

 > OpenSIPS eBootcamp 23rd May - 3rd June 2022
 > https://opensips.org/training/OpenSIPS_eBootcamp_2022/ 
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/>

 >
 > On 5/18/22 12:25 AM, Bela H wrote:
 >>
 >> Hi Bogdan,
 >>
 >> I have re-installed the CP 9.3.2 but the results are same. Still
 >> missing CDR fields in the CDR Viewer and no gear icon anywhere only
 >> Users/Alias Management and System/Monit.
 >>
 >> However, in the CDR details I can see the additional fields:
 >>
 >> What did I wrong?
 >>
 >> Cheers,
 >>
 >> Bela
 >>
 >> *From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org 
<mailto:bog...@opensips.org>>

 >> *Sent: *Wednesday, 18 May 2022 03:01
 >> *To: *OpenSIPS users mailling list 
<mailto:Users@lists.opensips.org <mailto:Users@lists.opensips.org>>;

 >> Bela H <mailto:hob...@hotmail.com <mailto:hob...@hotmail.com>>
 >> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
 >>
 >> Hi Bela,
 >>
 >> Does you CDRviewer look like this ?
 >>
 >>
 >>
 >> See the gear box in the right upper corner.
 >>
 >> And be sure that the 9.3.2 version is indeed displayed in the left
 >> upper corner.
 >>
 >> Regards,
 >>
 >> Bogdan-Andrei Iancu
 >> OpenSIPS Founder and Developer
 >> https://www.opensips-solutions.com 
<https://www.opensips-solutions.com> 
<https://www.opensips-solutions.com 
<https://www.opensips-solutions.com>>

 >> OpenSIPS eBootcamp 23rd May - 3rd June 2022
 >> https://opensips.org/training/OpenSIPS_eBootcamp_2022/ 
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/> 
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/ 
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/>>

 >>
 >> On 5/17/22 10:55 AM, Bela H wrote:
 >>
 >> Hello,
 >>
 >> What is the best method to upgrade the control panel from 
8.3.2 to

 >> 9.3.2?
 >>
 >> I had some extra fields e.g. in CDR viewer and disappeared after
 >> 9.3.2. It is in the file
 >> 
/var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php
 >> but not visible in the CDR viewer panel only in the detailed 
view

 >> for each call.
 >>
 >> Also I don’t see this gear icon Bogdan mentioned in the blog: 
Each

 >> tool has its own Settings panel “accessible via the gear-icon in
 >> the right side of the too

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Răzvan Crainea]

Well, this depends on the way you had set up your call forwarding 
feature in OpenSIPS. But since most likely this is a custom handling, in 
a custom table, you will have better experience if you are using the 
tviewer tool în 9.3.2. So the answer is yes, it is worth upgrading :).


Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 6/7/22 11:44, Bela H wrote:

Hi Răzvan,

Unfortunately there was no luck, I rolled it back.

However, I am not sure if this latest 9.3.2 version has the feature I 
was hoping for.


Is there an “easy” way to configure this new CP GUI for call forwarding 
management? Currently I set up/modify directly in the DB.


Cheers,

Bela

*From: *Răzvan Crainea <mailto:raz...@opensips.org>
*Sent: *Tuesday, 7 June 2022 20:36
*To: *users@lists.opensips.org <mailto:users@lists.opensips.org>
*Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hi, Bela!

Did you manage to sort this out? If not, perhaps Daniel, the guy who
reworked the settings feature might be able to help you out.

Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com <http://www.opensips-solutions.com>

On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:
 > Hi Bela,
 >
 > OK, be sure the user you are using to log into CP has the "admin"
 > permission on the cdrviewer tool . Check this via the Admin tools -> 
Access.

 >
 > Regards,
 >
 > Bogdan-Andrei Iancu
 >
 > OpenSIPS Founder and Developer
 > https://www.opensips-solutions.com <https://www.opensips-solutions.com>
 > OpenSIPS eBootcamp 23rd May - 3rd June 2022
 > https://opensips.org/training/OpenSIPS_eBootcamp_2022/ 
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/>

 >
 > On 5/18/22 12:25 AM, Bela H wrote:
 >>
 >> Hi Bogdan,
 >>
 >> I have re-installed the CP 9.3.2 but the results are same. Still
 >> missing CDR fields in the CDR Viewer and no gear icon anywhere only
 >> Users/Alias Management and System/Monit.
 >>
 >> However, in the CDR details I can see the additional fields:
 >>
 >> What did I wrong?
 >>
 >> Cheers,
 >>
 >> Bela
 >>
 >> *From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org 
<mailto:bog...@opensips.org>>

 >> *Sent: *Wednesday, 18 May 2022 03:01
 >> *To: *OpenSIPS users mailling list <mailto:Users@lists.opensips.org 
<mailto:Users@lists.opensips.org>>;

 >> Bela H <mailto:hob...@hotmail.com <mailto:hob...@hotmail.com>>
 >> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
 >>
 >> Hi Bela,
 >>
 >> Does you CDRviewer look like this ?
 >>
 >>
 >>
 >> See the gear box in the right upper corner.
 >>
 >> And be sure that the 9.3.2 version is indeed displayed in the left
 >> upper corner.
 >>
 >> Regards,
 >>
 >> Bogdan-Andrei Iancu
 >> OpenSIPS Founder and Developer
 >> https://www.opensips-solutions.com 
<https://www.opensips-solutions.com>  
<https://www.opensips-solutions.com <https://www.opensips-solutions.com>>

 >> OpenSIPS eBootcamp 23rd May - 3rd June 2022
 >> https://opensips.org/training/OpenSIPS_eBootcamp_2022/ 
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/>  
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/ 
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/>>

 >>
 >> On 5/17/22 10:55 AM, Bela H wrote:
 >>
 >> Hello,
 >>
 >> What is the best method to upgrade the control panel from 8.3.2 to
 >> 9.3.2?
 >>
 >> I had some extra fields e.g. in CDR viewer and disappeared after
 >> 9.3.2. It is in the file
 >> 
/var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php

 >> but not visible in the CDR viewer panel only in the detailed view
 >> for each call.
 >>
 >> Also I don’t see this gear icon Bogdan mentioned in the blog: Each
 >> tool has its own Settings panel “accessible via the gear-icon in
 >> the right side of the tool header”.
 >>
 >> Cheers,
 >>
 >> Bela
 >>
 >>
 >>
 >> ___
 >>
 >> Users mailing list
 >>
 >> Users@lists.opensips.org  <mailto:Users@lists.opensips.org 
<mailto:Users@lists.opensips.org>>

 >>
 >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users 
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>  
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users 
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>>

 >>
 >
 >
 > __

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Hi Răzvan,

Unfortunately there was no luck, I rolled it back.
However, I am not sure if this latest 9.3.2 version has the feature I was 
hoping for.
Is there an “easy” way to configure this new CP GUI for call forwarding 
management? Currently I set up/modify directly in the DB.

Cheers,
Bela


From: Răzvan Crainea<mailto:raz...@opensips.org>
Sent: Tuesday, 7 June 2022 20:36
To: users@lists.opensips.org<mailto:users@lists.opensips.org>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hi, Bela!

Did you manage to sort this out? If not, perhaps Daniel, the guy who
reworked the settings feature might be able to help you out.

Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:
> Hi Bela,
>
> OK, be sure the user you are using to log into CP has the "admin"
> permission on the cdrviewer tool . Check this via the Admin tools -> Access.
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
>https://www.opensips-solutions.com
> OpenSIPS eBootcamp 23rd May - 3rd June 2022
>https://opensips.org/training/OpenSIPS_eBootcamp_2022/
>
> On 5/18/22 12:25 AM, Bela H wrote:
>>
>> Hi Bogdan,
>>
>> I have re-installed the CP 9.3.2 but the results are same. Still
>> missing CDR fields in the CDR Viewer and no gear icon anywhere only
>> Users/Alias Management and System/Monit.
>>
>> However, in the CDR details I can see the additional fields:
>>
>> What did I wrong?
>>
>> Cheers,
>>
>> Bela
>>
>> *From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org>
>> *Sent: *Wednesday, 18 May 2022 03:01
>> *To: *OpenSIPS users mailling list <mailto:Users@lists.opensips.org>;
>> Bela H <mailto:hob...@hotmail.com>
>> *Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2
>>
>> Hi Bela,
>>
>> Does you CDRviewer look like this ?
>>
>>
>>
>> See the gear box in the right upper corner.
>>
>> And be sure that the 9.3.2 version is indeed displayed in the left
>> upper corner.
>>
>> Regards,
>>
>> Bogdan-Andrei Iancu
>> OpenSIPS Founder and Developer
>>https://www.opensips-solutions.com  <https://www.opensips-solutions.com>
>> OpenSIPS eBootcamp 23rd May - 3rd June 2022
>>https://opensips.org/training/OpenSIPS_eBootcamp_2022/  
>> <https://opensips.org/training/OpenSIPS_eBootcamp_2022/>
>>
>> On 5/17/22 10:55 AM, Bela H wrote:
>>
>> Hello,
>>
>> What is the best method to upgrade the control panel from 8.3.2 to
>> 9.3.2?
>>
>> I had some extra fields e.g. in CDR viewer and disappeared after
>> 9.3.2. It is in the file
>> /var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php
>> but not visible in the CDR viewer panel only in the detailed view
>> for each call.
>>
>> Also I don’t see this gear icon Bogdan mentioned in the blog: Each
>> tool has its own Settings panel “accessible via the gear-icon in
>> the right side of the tool header”.
>>
>> Cheers,
>>
>> Bela
>>
>>
>>
>> ___
>>
>> Users mailing list
>>
>> Users@lists.opensips.org  <mailto:Users@lists.opensips.org>
>>
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users  
>> <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>>
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Răzvan Crainea]

Hi, Bela!

Did you manage to sort this out? If not, perhaps Daniel, the guy who 
reworked the settings feature might be able to help you out.


Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 5/18/22 09:06, Bogdan-Andrei Iancu wrote:

Hi Bela,

OK, be sure the user you are using to log into CP has the "admin" 
permission on the cdrviewer tool . Check this via the Admin tools -> Access.


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
   https://www.opensips-solutions.com
OpenSIPS eBootcamp 23rd May - 3rd June 2022
   https://opensips.org/training/OpenSIPS_eBootcamp_2022/

On 5/18/22 12:25 AM, Bela H wrote:


Hi Bogdan,

I have re-installed the CP 9.3.2 but the results are same. Still 
missing CDR fields in the CDR Viewer and no gear icon anywhere only 
Users/Alias Management and System/Monit.


However, in the CDR details I can see the additional fields:

What did I wrong?

Cheers,

Bela

*From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org>
*Sent: *Wednesday, 18 May 2022 03:01
*To: *OpenSIPS users mailling list <mailto:Users@lists.opensips.org>; 
Bela H <mailto:hob...@hotmail.com>

*Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hi Bela,

Does you CDRviewer look like this ?



See the gear box in the right upper corner.

And be sure that the 9.3.2 version is indeed displayed in the left 
upper corner.


Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
   https://www.opensips-solutions.com  <https://www.opensips-solutions.com>
OpenSIPS eBootcamp 23rd May - 3rd June 2022
   https://opensips.org/training/OpenSIPS_eBootcamp_2022/  
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/>

On 5/17/22 10:55 AM, Bela H wrote:

Hello,

What is the best method to upgrade the control panel from 8.3.2 to
9.3.2?

I had some extra fields e.g. in CDR viewer and disappeared after
9.3.2. It is in the file
/var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php
but not visible in the CDR viewer panel only in the detailed view
for each call.

Also I don’t see this gear icon Bogdan mentioned in the blog: Each
tool has its own Settings panel “accessible via the gear-icon in
the right side of the tool header”.

Cheers,

Bela



___

Users mailing list

Users@lists.opensips.org  <mailto:Users@lists.opensips.org>

http://lists.opensips.org/cgi-bin/mailman/listinfo/users  
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>




___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bogdan-Andrei Iancu]

Hi Bela,

OK, be sure the user you are using to log into CP has the "admin" 
permission on the cdrviewer tool . Check this via the Admin tools -> Access.


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS eBootcamp 23rd May - 3rd June 2022
  https://opensips.org/training/OpenSIPS_eBootcamp_2022/

On 5/18/22 12:25 AM, Bela H wrote:


Hi Bogdan,

I have re-installed the CP 9.3.2 but the results are same. Still 
missing CDR fields in the CDR Viewer and no gear icon anywhere only 
Users/Alias Management and System/Monit.


However, in the CDR details I can see the additional fields:

What did I wrong?

Cheers,

Bela

*From: *Bogdan-Andrei Iancu <mailto:bog...@opensips.org>
*Sent: *Wednesday, 18 May 2022 03:01
*To: *OpenSIPS users mailling list <mailto:Users@lists.opensips.org>; 
Bela H <mailto:hob...@hotmail.com>

*Subject: *Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hi Bela,

Does you CDRviewer look like this ?



See the gear box in the right upper corner.

And be sure that the 9.3.2 version is indeed displayed in the left 
upper corner.


Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
   https://www.opensips-solutions.com  <https://www.opensips-solutions.com>
OpenSIPS eBootcamp 23rd May - 3rd June 2022
   https://opensips.org/training/OpenSIPS_eBootcamp_2022/  
<https://opensips.org/training/OpenSIPS_eBootcamp_2022/>

On 5/17/22 10:55 AM, Bela H wrote:

Hello,

What is the best method to upgrade the control panel from 8.3.2 to
9.3.2?

I had some extra fields e.g. in CDR viewer and disappeared after
9.3.2. It is in the file
/var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php
but not visible in the CDR viewer panel only in the detailed view
for each call.

Also I don’t see this gear icon Bogdan mentioned in the blog: Each
tool has its own Settings panel “accessible via the gear-icon in
the right side of the tool header”.

Cheers,

Bela



___

Users mailing list

Users@lists.opensips.org  <mailto:Users@lists.opensips.org>

http://lists.opensips.org/cgi-bin/mailman/listinfo/users  
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Hi Bogdan,

I have re-installed the CP 9.3.2 but the results are same. Still missing CDR 
fields in the CDR Viewer and no gear icon anywhere only Users/Alias Management 
and System/Monit.

[cid:image002.png@01D86A99.33EE85C0]

However, in the CDR details I can see the additional fields:
[cid:image005.png@01D86A99.33EE85C0]

What did I wrong?

Cheers,
Bela

From: Bogdan-Andrei Iancu<mailto:bog...@opensips.org>
Sent: Wednesday, 18 May 2022 03:01
To: OpenSIPS users mailling list<mailto:Users@lists.opensips.org>; Bela 
H<mailto:hob...@hotmail.com>
Subject: Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

Hi Bela,

Does you CDRviewer look like this ?

[cid:part1.1E9CE55B.28BF7076@opensips.org]

See the gear box in the right upper corner.

And be sure that the 9.3.2 version is indeed displayed in the left upper corner.

Regards,


Bogdan-Andrei Iancu



OpenSIPS Founder and Developer

  https://www.opensips-solutions.com

OpenSIPS eBootcamp 23rd May - 3rd June 2022

  https://opensips.org/training/OpenSIPS_eBootcamp_2022/
On 5/17/22 10:55 AM, Bela H wrote:

Hello,

What is the best method to upgrade the control panel from 8.3.2 to 9.3.2?
I had some extra fields e.g. in CDR viewer and disappeared after 9.3.2. It is 
in the file 
/var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php but not 
visible in the CDR viewer panel only in the detailed view for each call.

Also I don’t see this gear icon Bogdan mentioned in the blog: Each tool has its 
own Settings panel “accessible via the gear-icon in the right side of the tool 
header”.

Cheers,
Bela



___

Users mailing list

Users@lists.opensips.org<mailto:Users@lists.opensips.org>

http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bogdan-Andrei Iancu]

Hi Bela,

Does you CDRviewer look like this ?



See the gear box in the right upper corner.

And be sure that the 9.3.2 version is indeed displayed in the left upper 
corner.


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS eBootcamp 23rd May - 3rd June 2022
  https://opensips.org/training/OpenSIPS_eBootcamp_2022/

On 5/17/22 10:55 AM, Bela H wrote:


Hello,

What is the best method to upgrade the control panel from 8.3.2 to 9.3.2?

I had some extra fields e.g. in CDR viewer and disappeared after 
9.3.2. It is in the file 
/var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php 
but not visible in the CDR viewer panel only in the detailed view for 
each call.


Also I don’t see this gear icon Bogdan mentioned in the blog: Each 
tool has its own Settings panel “accessible via the gear-icon in the 
right side of the tool header”.


Cheers,

Bela


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] OpenSIPS CP upgrade to 9.3.2

[Bela H]

Hello,

What is the best method to upgrade the control panel from 8.3.2 to 9.3.2?
I had some extra fields e.g. in CDR viewer and disappeared after 9.3.2. It is 
in the file 
/var/www/html/opensips-cp/config/tools/system/cdrviewer/local.inc.php but not 
visible in the CDR viewer panel only in the detailed view for each call.

Also I don’t see this gear icon Bogdan mentioned in the blog: Each tool has its 
own Settings panel “accessible via the gear-icon in the right side of the tool 
header”.

Cheers,
Bela
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Kevin Wormington]

I would start with double checking that the permissions module is actually 
loaded on the server.  That is the most common reason to get a reload error.

Kevin
> On Jul 20, 2021, at 11:26 AM, Jeff Wilkie  wrote:
> 
> Opensips 3.1.2
> CP 8.3.1
> Debian 10
> 
> When adding permissions, I hit "Reload on Server" but I get the following 
> error:
> 
> Sending to json:127.0.0.1:/mi : MI command failed with code -32601 
> (Method not found)
> 
> I​
> I don't get this error on any other page but this one when attempting to 
> "Reload on Server".  Is there something specifically wrong with this page and 
> how it uses the MI command structure?  Again, All other pages that use the 
> "Reload on Server" give a 200ok and work as expected.
> 
> Thanks,
> 
> Jeff
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Jeff Wilkie]

Opensips 3.1.2
CP 8.3.1
Debian 10

When adding permissions, I hit "Reload on Server" but I get the following error:

Sending to json:127.0.0.1:/mi : MI command failed with code -32601 (Method 
not found)

I​
I don't get this error on any other page but this one when attempting to 
"Reload on Server".  Is there something specifically wrong with this page and 
how it uses the MI command structure?  Again, All other pages that use the 
"Reload on Server" give a 200ok and work as expected.

Thanks,

Jeff
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Jeff Wilkie]

You are correct.  My error.  It wasn't loaded.

Thanks
Jeff


On Thu, Jul 22, 2021 at 2:57 AM Bogdan-Andrei Iancu 
wrote:

> Hi Jeff,
>
> Are you sure the OpenSIPS (your CP is connected to ) has the permissions
> module loaded ?
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
>   https://www.opensips-solutions.com
> OpenSIPS Bootcamp 2021 online
>   https://opensips.org/training/OpenSIPS_eBootcamp_2021/
>
> On 7/21/21 4:17 PM, Jeff Wilkie wrote:
>
> Opensips 3.1.2
> CP 8.3.1
> Debian 10
>
> When adding permissions, I hit "Reload on Server" but I get the
> following error:
>
> Sending to *json:127.0.0.1:/mi * : MI
> command failed with code -32601 (Method not found)
>
> I
> I don't get this error on any other page but this one when attempting to
> "Reload on Server".  Is there something specifically wrong with this page
> and how it uses the MI command structure?  Again, All other pages that use
> the "Reload on Server" give a 200ok and work as expected.
>
> Thanks,
>
> Jeff
>
> ___
> Users mailing 
> listUsers@lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Bogdan-Andrei Iancu]

Hi Jeff,

Are you sure the OpenSIPS (your CP is connected to ) has the permissions 
module loaded ?


Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
  https://www.opensips-solutions.com
OpenSIPS Bootcamp 2021 online
  https://opensips.org/training/OpenSIPS_eBootcamp_2021/

On 7/21/21 4:17 PM, Jeff Wilkie wrote:

Opensips 3.1.2
CP 8.3.1
Debian 10

When adding permissions, I hit "Reload on Server" but I get the 
following error:


Sending to*json:127.0.0.1:/mi *:MI 
command failed with code -32601 (Method not found)


I
I don't get this error on any other page but this one when 
attempting to "Reload on Server".  Is there something specifically 
wrong with this page and how it uses the MI command structure?  Again, 
All other pages that use the "Reload on Server" give a 200ok and work 
as expected.


Thanks,

Jeff

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] Opensips CP Permissions "RELOAD on SERVER" produces error

[Jeff Wilkie]

Opensips 3.1.2
CP 8.3.1
Debian 10

When adding permissions, I hit "Reload on Server" but I get the
following error:

Sending to *json:127.0.0.1:/mi * : MI command
failed with code -32601 (Method not found)

I
I don't get this error on any other page but this one when attempting to
"Reload on Server".  Is there something specifically wrong with this page
and how it uses the MI command structure?  Again, All other pages that use
the "Reload on Server" give a 200ok and work as expected.

Thanks,

Jeff
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPs & CP - Documentation (Dynamic Routing, DialPlans, CP)

[Schneur Rosenberg]

Why don't you get Bogdans book? It's called Building telephony systems with
OpenSIPs second edition, it's a little old but it's a good start.

On Fri, Mar 12, 2021, 08:55 Rick McGill - ₪  wrote:

> Dear OpenSIPs Community,
>
> I'm very new to OpenSIPS and have a new fresh install and have started to
> customize it.
> So if my question seems so very basic this is why.
>
> I have the following:
> Debian 1.7 (Buster)
> OpenSIPs 3.1
> OpenSIPs Control Panel
> RTPproxy
>
> I have a couple of uses setup and can call with softphone from User to user
> on OpenSIPS.
> I have an FreePBX/Asterisk SIP Trunk setup to OpenSIPS.   With outbound
> routes and all configured and working properly.
> I also have on OpenSIPS a Route/Gateway or Trunk from OpenSIPs to CommPeak
> For Outbound calls.
>
> The issue I'm having is learning or finding documentation on how exactly to
> setup Dialplan, Dynamic Routes, Permissions and such so that I can get a
> call from Ext on Asterisk routed to OpenSIPS then out to CommPeak for an
> outbound International call.
>
> Currently when I try to make this type of call OpenSIPS says for example
> 662...@sip.netrovoip.comuserloc does not exists and hangs up.
> Sip.netrovoip.com is my OpenSIPs server
> So apparently with all my efforts my Dialplan, Permissions, and Dynamic
> Routes is not working no matter what changes I keep trying in them.
>
> FYI I have not yet edited or customized the file
> /var/www/opensips-cp/config/tools/system/dialplan/local.inc.php
>
> I cannot find out what code and customization I should do for attrib and
> what I can use standard in OpenSIPS-CP
>
> $config->attrs_cb=array(
> <-->// name , description
> <-->"a" => "Descr a",
> <-->"b" => "Descr b",
> <-->"c" => "Descr c",
>
> So My question is:
> Where can I find some comprehensive detailed documentation (if it exists)
> so
> I can learn more about the following?:
> Dialplans
> Dynamic Routes
> And whatever else I need to learn to get this kind of basic Dynamic Routing
> working?
> I have gone thru the OpenSIPS-CP documentation and the OpenSIPs.org too but
> there it seems a bit basic or outdated.
>
> Also I do have my Regular Expressions Quick Reference v1.2 but no matter
> what I program in CP it does not seem to work.
> I think I'm missing some very basic but major bit of information on how to
> get this simple Asterisk -> OpenSIPS -> CommPeak outbound call basic setup
> configured / working.
>
> Again sorry if all this sound like such a basic knowledge set of questions.
>
>
> 
> ---
> Rick McGill – CEO
> r...@netrovoip.com | r...@netropolitanworks.com
> Thailand: +66-2105-4262  x1001  |   USA: +1-737-237-2030   |Mobile:
> +66-85557-3000
> Support:: +66-97047-2000  |  SKYPE & LINE ID:  NetroVOIP  |
> supp...@netrovoip.com
>   ₪  www.NetroVOIP.com  Telecommunications / Video Consulting & Solutions
> Provider
>
> 
> ---
>
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] OpenSIPs & CP - Documentation (Dynamic Routing, DialPlans, CP)

[Rick McGill - ₪]

Dear OpenSIPs Community,

I'm very new to OpenSIPS and have a new fresh install and have started to
customize it.
So if my question seems so very basic this is why.

I have the following:
Debian 1.7 (Buster)
OpenSIPs 3.1
OpenSIPs Control Panel
RTPproxy

I have a couple of uses setup and can call with softphone from User to user
on OpenSIPS.
I have an FreePBX/Asterisk SIP Trunk setup to OpenSIPS.   With outbound
routes and all configured and working properly.  
I also have on OpenSIPS a Route/Gateway or Trunk from OpenSIPs to CommPeak
For Outbound calls.

The issue I'm having is learning or finding documentation on how exactly to
setup Dialplan, Dynamic Routes, Permissions and such so that I can get a
call from Ext on Asterisk routed to OpenSIPS then out to CommPeak for an
outbound International call.

Currently when I try to make this type of call OpenSIPS says for example
662...@sip.netrovoip.comuserloc does not exists and hangs up.
Sip.netrovoip.com is my OpenSIPs server
So apparently with all my efforts my Dialplan, Permissions, and Dynamic
Routes is not working no matter what changes I keep trying in them.

FYI I have not yet edited or customized the file
/var/www/opensips-cp/config/tools/system/dialplan/local.inc.php

I cannot find out what code and customization I should do for attrib and
what I can use standard in OpenSIPS-CP

$config->attrs_cb=array(
<-->// name , description
<-->"a" => "Descr a",
<-->"b" => "Descr b",
<-->"c" => "Descr c",

So My question is:
Where can I find some comprehensive detailed documentation (if it exists) so
I can learn more about the following?:
Dialplans
Dynamic Routes
And whatever else I need to learn to get this kind of basic Dynamic Routing
working?
I have gone thru the OpenSIPS-CP documentation and the OpenSIPs.org too but
there it seems a bit basic or outdated.

Also I do have my Regular Expressions Quick Reference v1.2 but no matter
what I program in CP it does not seem to work.
I think I'm missing some very basic but major bit of information on how to
get this simple Asterisk -> OpenSIPS -> CommPeak outbound call basic setup
configured / working.

Again sorry if all this sound like such a basic knowledge set of questions.


---
Rick McGill – CEO
r...@netrovoip.com | r...@netropolitanworks.com 
Thailand: +66-2105-4262  x1001  |   USA: +1-737-237-2030   |Mobile:
+66-85557-3000
Support:: +66-97047-2000  |  SKYPE & LINE ID:  NetroVOIP  |
supp...@netrovoip.com
  ₪  www.NetroVOIP.com  Telecommunications / Video Consulting & Solutions
Provider

---   



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS-CP errors

[bobsy via Users]

Okay m4 dependency was missing.

> On 14 Jan 2021, at 1:07 pm, bobsy  wrote:
> 
> While I’m at it when I try to create a script using osipsconfig I get this :
> 
> 
>   Config generated : 
> /etc/opensips/opensips_loadbalancer_2021-1-14_13:6:
> 26.cfg = FAILED (). Press any key to continue
> 
> 
>> On 14 Jan 2021, at 12:55 pm, bobsy via Users > > wrote:
>> 
>> Hi,
>> 
>> I’m using opensips 3.1.1 from deb repo
>> And opensips-cp 8.3.1
>> With nginx and php7.3-fpm
>> Postgresql for db
>> 
>> And I’ve configured mi_http for json…
>> 
>> I’m receiving a few errors like this:
>> 
>> Failed to issue total count query, error message : Array ( [0] => 42P01 [1] 
>> => 7 [2] => ERROR: relation "cc_agents" does not exist LINE 2: from 
>> cc_agents ^ ) [select count(id) from cc_agents]
>> 
>> On the call centre page and on the dialog page
>> 
>> 
>> 2021/01/14 12:50:29 [error] 3849#3849: *289 FastCGI sent in stderr: "PHP 
>> message: PHP Warning:  Creating default object from empty value in 
>> /var/www/opensips-cp/config/tools/system/dialog/local.inc.php on line 27PHP 
>> message: PHP Notice:  Array to string conversion in 
>> /var/www/opensips-cp/web/tools/system/dialog/dialog.php on line 112" while 
>> reading response header from upstream, client: 119.18.18.117, server: 
>> opensips.vale.ski, request: "GET /tools/system/dialog/dialog.php HTTP/1.1", 
>> upstream: "fastcgi://unix:/run/php/php7.3-fpm.sock: 
>> ", host: "opensips.vale.ski", 
>> referrer: "http://opensips.vale.ski/menu.php 
>> ”
>> 
>> I get this error on that page:
>> 
>> MI command failed with code -32601 (Method not found)
>> 
>> Any insight would be greatly appreciated.
>> 
>> 
>> ___
>> Users mailing list
>> Users@lists.opensips.org 
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> 

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS-CP errors

[bobsy via Users]

While I’m at it when I try to create a script using osipsconfig I get this :


  Config generated : /etc/opensips/opensips_loadbalancer_2021-1-14_13:6:
26.cfg = FAILED (). Press any key to continue


> On 14 Jan 2021, at 12:55 pm, bobsy via Users  wrote:
> 
> Hi,
> 
> I’m using opensips 3.1.1 from deb repo
> And opensips-cp 8.3.1
> With nginx and php7.3-fpm
> Postgresql for db
> 
> And I’ve configured mi_http for json…
> 
> I’m receiving a few errors like this:
> 
> Failed to issue total count query, error message : Array ( [0] => 42P01 [1] 
> => 7 [2] => ERROR: relation "cc_agents" does not exist LINE 2: from cc_agents 
> ^ ) [select count(id) from cc_agents]
> 
> On the call centre page and on the dialog page
> 
> 
> 2021/01/14 12:50:29 [error] 3849#3849: *289 FastCGI sent in stderr: "PHP 
> message: PHP Warning:  Creating default object from empty value in 
> /var/www/opensips-cp/config/tools/system/dialog/local.inc.php on line 27PHP 
> message: PHP Notice:  Array to string conversion in 
> /var/www/opensips-cp/web/tools/system/dialog/dialog.php on line 112" while 
> reading response header from upstream, client: 119.18.18.117, server: 
> opensips.vale.ski, request: "GET /tools/system/dialog/dialog.php HTTP/1.1", 
> upstream: "fastcgi://unix:/run/php/php7.3-fpm.sock: 
> ", host: "opensips.vale.ski", 
> referrer: "http://opensips.vale.ski/menu.php 
> ”
> 
> I get this error on that page:
> 
> MI command failed with code -32601 (Method not found)
> 
> Any insight would be greatly appreciated.
> 
> 
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] OpenSIPS-CP errors

[bobsy via Users]

I also get this in OpenSIPS

 DBG:httpd:answer_to_connection: START *** cls=(nil), 
connection=0x55d766a1b220, url=/mi, method=POST, versio=HTTP/1.1, 
upload_data[48]=0x55d766a229cc, *con_cls=0x7f53f1f2d4d0
Jan 14 12:57:26 [27593] DBG:httpd:answer_to_connection: NOT a regular POST :o)
Jan 14 12:57:26 [27593] DBG:httpd:getConnectionHeader: key=[Host] 
value=[127.0.0.1:]
Jan 14 12:57:26 [27593] DBG:httpd:getConnectionHeader: Accept=*/*
Jan 14 12:57:26 [27593] DBG:httpd:getConnectionHeader: 
Content-Type=application/json
Jan 14 12:57:26 [27593] DBG:httpd:getConnectionHeader: Content-Length=48
Jan 14 12:57:26 [27593] DBG:httpd:answer_to_connection: got ContentType [3] 
with len [48]: {"jsonrpc":"2.0","id":1,"method":"dr_gw_status"}\nJan 14 
12:57:26 [27593] DBG:httpd:answer_to_connection: START *** cls=(nil), 
connection=0x55d766a1b220, url=/mi, method=POST, versio=HTTP/1.1, 
upload_data[0]=(nil), *con_cls=0x7f53f1f2d4d0
Jan 14 12:57:26 [27593] DBG:httpd:answer_to_connection: normalised_url=[]
Jan 14 12:57:26 [27593] DBG:mi_http:mi_json_answer_to_connection: START *** 
cls=(nil), connection=0x55d766a1b220, url=, method=POST, version=HTTP/1.1, 
upload_data[48]=0x7f53f1f2b299, *con_cls=0x7f53f1f2d468
Jan 14 12:57:26 [27593] DBG:mi_http:mi_http_run_mi_cmd: got command=dr_gw_status
Jan 14 12:57:26 [27593] ERROR:core:handle_mi_request: Command not found

> On 14 Jan 2021, at 12:55 pm, bobsy  wrote:
> 
> Hi,
> 
> I’m using opensips 3.1.1 from deb repo
> And opensips-cp 8.3.1
> With nginx and php7.3-fpm
> Postgresql for db
> 
> And I’ve configured mi_http for json…
> 
> I’m receiving a few errors like this:
> 
> Failed to issue total count query, error message : Array ( [0] => 42P01 [1] 
> => 7 [2] => ERROR: relation "cc_agents" does not exist LINE 2: from cc_agents 
> ^ ) [select count(id) from cc_agents]
> 
> On the call centre page and on the dialog page
> 
> 
> 2021/01/14 12:50:29 [error] 3849#3849: *289 FastCGI sent in stderr: "PHP 
> message: PHP Warning:  Creating default object from empty value in 
> /var/www/opensips-cp/config/tools/system/dialog/local.inc.php on line 27PHP 
> message: PHP Notice:  Array to string conversion in 
> /var/www/opensips-cp/web/tools/system/dialog/dialog.php on line 112" while 
> reading response header from upstream, client: 119.18.18.117, server: 
> opensips.vale.ski, request: "GET /tools/system/dialog/dialog.php HTTP/1.1", 
> upstream: "fastcgi://unix:/run/php/php7.3-fpm.sock: 
> ", host: "opensips.vale.ski", 
> referrer: "http://opensips.vale.ski/menu.php 
> ”
> 
> I get this error on that page:
> 
> MI command failed with code -32601 (Method not found)
> 
> Any insight would be greatly appreciated.
> 
> 

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] OpenSIPS-CP errors

[bobsy via Users]

Hi,

I’m using opensips 3.1.1 from deb repo
And opensips-cp 8.3.1
With nginx and php7.3-fpm
Postgresql for db

And I’ve configured mi_http for json…

I’m receiving a few errors like this:

Failed to issue total count query, error message : Array ( [0] => 42P01 [1] => 
7 [2] => ERROR: relation "cc_agents" does not exist LINE 2: from cc_agents ^ ) 
[select count(id) from cc_agents]

On the call centre page and on the dialog page


2021/01/14 12:50:29 [error] 3849#3849: *289 FastCGI sent in stderr: "PHP 
message: PHP Warning:  Creating default object from empty value in 
/var/www/opensips-cp/config/tools/system/dialog/local.inc.php on line 27PHP 
message: PHP Notice:  Array to string conversion in 
/var/www/opensips-cp/web/tools/system/dialog/dialog.php on line 112" while 
reading response header from upstream, client: 119.18.18.117, server: 
opensips.vale.ski, request: "GET /tools/system/dialog/dialog.php HTTP/1.1", 
upstream: "fastcgi://unix:/run/php/php7.3-fpm.sock:", host: 
"opensips.vale.ski", referrer: "http://opensips.vale.ski/menu.php”

I get this error on that page:

MI command failed with code -32601 (Method not found)

Any insight would be greatly appreciated.


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips-cp 8.3.0 / Call to undefined function json_encode()

[Maciej Bylica]

Hello

Could somebody please point me to where I should look for the clue ?

Thanks
Maciej

pon., 30 lis 2020 o 15:51 Maciej Bylica  napisał(a):

> Hello
>
>
> I am struggling with OpenSIPS-CP 8.3.0 (.zip source) configuration on
> Centos 8.2
>
> Opensips 3.1 uses port 8000 to interop with opensips-cp, but there are no
> tcpdump packets on that port.
>
> It turned out that i am getting following errors on php level:
>
>
> [30-Nov-2020 14:13:54 UTC] PHP Warning:  Creating default object from
> empty value in
> /var/www/html/opensips-cp/config/tools/system/drouting/local.inc.php on
> line 24
>
> [30-Nov-2020 14:13:54 UTC] PHP Stack trace:
>
> [30-Nov-2020 14:13:54 UTC] PHP   1. {main}()
> /var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:0
>
> [30-Nov-2020 14:13:54 UTC] PHP   2. require()
> /var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:25
>
> [30-Nov-2020 14:13:54 UTC] PHP Error:  Call to undefined function
> json_encode() in /var/www/html/opensips-cp/web/common/mi_comm.php on line 31
>
> [30-Nov-2020 14:13:54 UTC] PHP Stack trace:
>
> [30-Nov-2020 14:13:54 UTC] PHP   1. {main}()
> /var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:0
>
> [30-Nov-2020 14:13:54 UTC] PHP   2. mi_command($command = 'dr_reload',
> $params_array = NULL, $mi_url = 'json:127.0.0.1:8000/JSON', $errors =
> NULL)
> /var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:43
>
> [30-Nov-2020 14:13:54 UTC] PHP   3. write2json($command = 'dr_reload',
> $params_array = NULL, $json_url = '127.0.0.1:8000/JSON', $errors = NULL)
> /var/www/html/opensips-cp/web/common/mi_comm.php:87
>
> [30-Nov-2020 14:13:54 UTC] PHP Fatal error:  Uncaught Error: Call to
> undefined function json_encode() in
> /var/www/html/opensips-cp/web/common/mi_comm.php:31
>
> Stack trace:
>
> #0 /var/www/html/opensips-cp/web/common/mi_comm.php(87):
> write2json('dr_reload', NULL, '127.0.0.1:8000/...', NULL)
>
> #1
> /var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php(43):
> mi_command('dr_reload', NULL, 'json:127.0.0.1:...', NULL)
>
> #2 {main}
>
>   thrown in /var/www/html/opensips-cp/web/common/mi_comm.php on line 31
>
>
> I followed installation document located at
> http://controlpanel.opensips.org/documentation.php.
>
>
> Here is my boxes.global.inc.php config:
>
> $boxes[$box_id]['mi']['conn']="json:127.0.0.1:8000/JSON";
>
> but i also tried with
>
> $boxes[$box_id]['mi']['conn']="json:127.0.0.1:8000/mi";
>
> with the same effect.
>
>
> Opensips (compiled from the sources) has got following modules up and
> running:
>
>
> HTTP
>
> loadmodule "httpd.so"
>
> modparam("httpd", "port", 8000)
>
>
> ###JSON
>
> loadmodule "json.so"
>
>
> ###MI_HTTP
>
> loadmodule "mi_http.so"
>
>
> Could you please point me where the problem might be located ?
>
>
> Thanks
>
> Maciej
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] Opensips-cp 8.3.0 / Call to undefined function json_encode()

[Maciej Bylica]

Hello


I am struggling with OpenSIPS-CP 8.3.0 (.zip source) configuration on
Centos 8.2

Opensips 3.1 uses port 8000 to interop with opensips-cp, but there are no
tcpdump packets on that port.

It turned out that i am getting following errors on php level:


[30-Nov-2020 14:13:54 UTC] PHP Warning:  Creating default object from empty
value in
/var/www/html/opensips-cp/config/tools/system/drouting/local.inc.php on
line 24

[30-Nov-2020 14:13:54 UTC] PHP Stack trace:

[30-Nov-2020 14:13:54 UTC] PHP   1. {main}()
/var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:0

[30-Nov-2020 14:13:54 UTC] PHP   2. require()
/var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:25

[30-Nov-2020 14:13:54 UTC] PHP Error:  Call to undefined function
json_encode() in /var/www/html/opensips-cp/web/common/mi_comm.php on line 31

[30-Nov-2020 14:13:54 UTC] PHP Stack trace:

[30-Nov-2020 14:13:54 UTC] PHP   1. {main}()
/var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:0

[30-Nov-2020 14:13:54 UTC] PHP   2. mi_command($command = 'dr_reload',
$params_array = NULL, $mi_url = 'json:127.0.0.1:8000/JSON', $errors = NULL)
/var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php:43

[30-Nov-2020 14:13:54 UTC] PHP   3. write2json($command = 'dr_reload',
$params_array = NULL, $json_url = '127.0.0.1:8000/JSON', $errors = NULL)
/var/www/html/opensips-cp/web/common/mi_comm.php:87

[30-Nov-2020 14:13:54 UTC] PHP Fatal error:  Uncaught Error: Call to
undefined function json_encode() in
/var/www/html/opensips-cp/web/common/mi_comm.php:31

Stack trace:

#0 /var/www/html/opensips-cp/web/common/mi_comm.php(87):
write2json('dr_reload', NULL, '127.0.0.1:8000/...', NULL)

#1
/var/www/html/opensips-cp/web/tools/system/drouting/apply_changes.php(43):
mi_command('dr_reload', NULL, 'json:127.0.0.1:...', NULL)

#2 {main}

  thrown in /var/www/html/opensips-cp/web/common/mi_comm.php on line 31


I followed installation document located at
http://controlpanel.opensips.org/documentation.php.


Here is my boxes.global.inc.php config:

$boxes[$box_id]['mi']['conn']="json:127.0.0.1:8000/JSON";

but i also tried with

$boxes[$box_id]['mi']['conn']="json:127.0.0.1:8000/mi";

with the same effect.


Opensips (compiled from the sources) has got following modules up and
running:


HTTP

loadmodule "httpd.so"

modparam("httpd", "port", 8000)


###JSON

loadmodule "json.so"


###MI_HTTP

loadmodule "mi_http.so"


Could you please point me where the problem might be located ?


Thanks

Maciej
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips-cp 8.3.0 HTTP/1.1 400 Bad Request..

[mrsanvicente]

Hi Ovidiu,

Thanks for taking the time for explaining.  I am sure some of us can take 
advantage of
It!

Mario San Vicente
Best regards

> El 3 nov 2020, a la(s) 22:51, Ovidiu Sas  escribió:
> 
> Hello Mario,
> 
> If you have CP working fine, you don't really need mi_html.
> If you want to have it as an alternative, load the module and set a
> new root path:
> modparam("mi_html", "root", "opensips_mi")
> Then you should be able to access the embedded management interface
> via http://[OPENSIPS_HTTPD_IP]:[OPENSIPS_HTTPD_PORT]/opensips_mi
> 
> This interface has nothing to do with CP. It's an alternative to
> opensipsctl, opensips-cli or CP (for dispatching management commands
> to opensips). The module was written to provide easy access to mi
> commands using a web browser (using the embedded web server from
> opensips - no need to use a dedicated web server).
> 
> The old name of the module was mi_http and was renamed to mi_html.
> The old mi_json was renamed to mi_http.
> No more mi_json, welcome mi_html and mi_http was "rebranded":
> mi_json [v<=2.4.x] -> mi_http [v>=3.0.x]
> mi_http [v<=2.4.x] -> mi_html [v>=3.0.x]
> This created some confusion when migrating from pre 2.4.x to post
> 3.0.x opensips versions.
> Clear as mud? :)
> 
> Hope this helps,
> Ovidiu
> 
>> On Tue, Nov 3, 2020 at 4:59 PM Mario San Vicente  
>> wrote:
>> 
>> Hello Răzvan /  Ovidiu,
>> 
>> After disabling mi_html, my CP is working fine, i will be enabling more 
>> modules on it.   Thanks for your help!
>> 
>> Ovidiu,   It would be good to have both portals running,but  i am not 
>> getting to work the following comment:
>> "If you want to keep mi_html, then set a different root path: 
>> #modparam("mi_html", "root", "osips_mi")  ", any other hint?
>> 
>> Thank you!
>> 
>> 
>> 
>> 
>> 
>>> On Tue, Nov 3, 2020 at 8:22 AM Ovidiu Sas  wrote:
>>> 
>>> Hello Mario,
>>> 
>>> It seems that you have both mi_http and mi_html modules loaded.
>>> By default, both modules have the root path set to mi and one of the
>>> modules is stealing the root path from the other.
>>> In your case, when you hit http://x.x.x.x:/mi , you are hitting a
>>> standalone management interface that is not part of opensips-cp. It's
>>> an alternative way to run mi commands through a web interface.
>>> 
>>> If you want to have only opensips-cp, then umload mi_html.
>>> If you want to keep mi_html, then set a different root path:
>>> #modparam("mi_html", "root", "osips_mi")
>>> 
>>> Hope this helps,
>>> Ovidiu
>>> 
>>> On Sat, Oct 31, 2020 at 1:58 PM Mario San Vicente
>>>  wrote:
 
 Hello  Răzvan ,
 I was wrong with my diagnosis, cause i stopped receiving the http / 400 
 error.  But when trying to monitor calls i see that the portal is not 
 reflecting the real info, i tested dialogs and rtpproxy.
 I do see the json reply on a trace, but it is not updated on the portal:
 
 T 127.0.0.1:47632 -> 127.0.0.1: [AP] #137
  POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
 application/json..Content-Length: 
 49{"jsonrpc":"2.0","id":1,"method":"rtpproxy_
  show"}"id..._";i#4
 #
 T 127.0.0.1: -> 127.0.0.1:47632 [A] #138
  ..._..k#)...
 #
 T 127.0.0.1: -> 127.0.0.1:47632 [AP] #139
  HTTP/1.1 200 OK..Content-Length: 136..Content-Type: 
 application/json..Date: Sat, 31 Oct 2020 17:34:22 
 GMT{"jsonrpc":"2.0","result":[{"Set":0,"Nodes
  
 ":[{"url":"udp:localhost:2123","index":0,"disabled":0,"weight":1,"recheck_ticks":0}]}],"id":1}.._..k#4
 
 T 127.0.0.1:47644 -> 127.0.0.1: [AP] #204
  POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
 application/json..Content-Length: 
 78{"jsonrpc":"2.0","id":1,"method":"dlg_list"
  ,"params":{"index":0,"counter":20}}._J.
 #
 T 127.0.0.1: -> 127.0.0.1:47644 [A] #205
  @.._
 #
 T 127.0.0.1: -> 127.0.0.1:47644 [AP] #206
  HTTP/1.1 200 OK..Content-Length: 58..Content-Type: 
 application/json..Date: Sat, 31 Oct 2020 17:42:14 
 GMT{"jsonrpc":"2.0","result":{"count":0,"Dialo
  gs":[]},"id":1}._4...4.
 
 Aside notes:
 When enabling this line #modparam("mi_http", "root", "opensips_mi") , i 
 can see the mi portal.  http://x.x.x.x:/mi , which has lots of 
 aditional info,  but i have to disable it to get the json response and 
 just get an http response pointing to the mi interface:
 T 127.0.0.1: -> 127.0.0.1:47654 [AP] #256
  HTTP/1.1 200 OK..Content-Length: 1886..Content-Type: text/html..Date: 
 Sat, 31 Oct 2020 17:55:45 GMTOpenSIPS Management 
 Interface
  >>> type="text/css">body{margin:0;}body,p,div,td,th,tr,form,ol,ul,li,input,textarea,select,a{font-family:"lucida
  grande",verdana,geneva,aria
  
 

Re: [OpenSIPS-Users] Opensips-cp 8.3.0 HTTP/1.1 400 Bad Request..

[Ovidiu Sas]

Hello Mario,

If you have CP working fine, you don't really need mi_html.
If you want to have it as an alternative, load the module and set a
new root path:
modparam("mi_html", "root", "opensips_mi")
Then you should be able to access the embedded management interface
via http://[OPENSIPS_HTTPD_IP]:[OPENSIPS_HTTPD_PORT]/opensips_mi

This interface has nothing to do with CP. It's an alternative to
opensipsctl, opensips-cli or CP (for dispatching management commands
to opensips). The module was written to provide easy access to mi
commands using a web browser (using the embedded web server from
opensips - no need to use a dedicated web server).

The old name of the module was mi_http and was renamed to mi_html.
The old mi_json was renamed to mi_http.
No more mi_json, welcome mi_html and mi_http was "rebranded":
mi_json [v<=2.4.x] -> mi_http [v>=3.0.x]
mi_http [v<=2.4.x] -> mi_html [v>=3.0.x]
This created some confusion when migrating from pre 2.4.x to post
3.0.x opensips versions.
Clear as mud? :)

Hope this helps,
Ovidiu

On Tue, Nov 3, 2020 at 4:59 PM Mario San Vicente  wrote:
>
> Hello Răzvan /  Ovidiu,
>
> After disabling mi_html, my CP is working fine, i will be enabling more 
> modules on it.   Thanks for your help!
>
> Ovidiu,   It would be good to have both portals running,but  i am not getting 
> to work the following comment:
> "If you want to keep mi_html, then set a different root path: 
> #modparam("mi_html", "root", "osips_mi")  ", any other hint?
>
> Thank you!
>
>
>
>
>
> On Tue, Nov 3, 2020 at 8:22 AM Ovidiu Sas  wrote:
>>
>> Hello Mario,
>>
>> It seems that you have both mi_http and mi_html modules loaded.
>> By default, both modules have the root path set to mi and one of the
>> modules is stealing the root path from the other.
>> In your case, when you hit http://x.x.x.x:/mi , you are hitting a
>> standalone management interface that is not part of opensips-cp. It's
>> an alternative way to run mi commands through a web interface.
>>
>> If you want to have only opensips-cp, then umload mi_html.
>> If you want to keep mi_html, then set a different root path:
>> #modparam("mi_html", "root", "osips_mi")
>>
>> Hope this helps,
>> Ovidiu
>>
>> On Sat, Oct 31, 2020 at 1:58 PM Mario San Vicente
>>  wrote:
>> >
>> > Hello  Răzvan ,
>> > I was wrong with my diagnosis, cause i stopped receiving the http / 400 
>> > error.  But when trying to monitor calls i see that the portal is not 
>> > reflecting the real info, i tested dialogs and rtpproxy.
>> > I do see the json reply on a trace, but it is not updated on the portal:
>> >
>> > T 127.0.0.1:47632 -> 127.0.0.1: [AP] #137
>> >   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
>> > application/json..Content-Length: 
>> > 49{"jsonrpc":"2.0","id":1,"method":"rtpproxy_
>> >   show"}"id..._";i#4
>> > #
>> > T 127.0.0.1: -> 127.0.0.1:47632 [A] #138
>> >   ..._..k#)...
>> > #
>> > T 127.0.0.1: -> 127.0.0.1:47632 [AP] #139
>> >   HTTP/1.1 200 OK..Content-Length: 136..Content-Type: 
>> > application/json..Date: Sat, 31 Oct 2020 17:34:22 
>> > GMT{"jsonrpc":"2.0","result":[{"Set":0,"Nodes
>> >   
>> > ":[{"url":"udp:localhost:2123","index":0,"disabled":0,"weight":1,"recheck_ticks":0}]}],"id":1}.._..k#4
>> > 
>> > T 127.0.0.1:47644 -> 127.0.0.1: [AP] #204
>> >   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
>> > application/json..Content-Length: 
>> > 78{"jsonrpc":"2.0","id":1,"method":"dlg_list"
>> >   ,"params":{"index":0,"counter":20}}._J.
>> > #
>> > T 127.0.0.1: -> 127.0.0.1:47644 [A] #205
>> >   @.._
>> > #
>> > T 127.0.0.1: -> 127.0.0.1:47644 [AP] #206
>> >   HTTP/1.1 200 OK..Content-Length: 58..Content-Type: 
>> > application/json..Date: Sat, 31 Oct 2020 17:42:14 
>> > GMT{"jsonrpc":"2.0","result":{"count":0,"Dialo
>> >   gs":[]},"id":1}._4...4.
>> >
>> > Aside notes:
>> > When enabling this line #modparam("mi_http", "root", "opensips_mi") , i 
>> > can see the mi portal.  http://x.x.x.x:/mi , which has lots of 
>> > aditional info,  but i have to disable it to get the json response and 
>> > just get an http response pointing to the mi interface:
>> > T 127.0.0.1: -> 127.0.0.1:47654 [AP] #256
>> >   HTTP/1.1 200 OK..Content-Length: 1886..Content-Type: text/html..Date: 
>> > Sat, 31 Oct 2020 17:55:45 GMTOpenSIPS Management 
>> > Interface
>> >   > > type="text/css">body{margin:0;}body,p,div,td,th,tr,form,ol,ul,li,input,textarea,select,a{font-family:"lucida
>> >  grande",verdana,geneva,aria
>> >   
>> > l,helvetica,sans-serif;font-size:14px;}a:hover{text-decoration:none;}a{text-decoration:underline;}.foot{padding-top:40px;font-size:10px;color:#33;}
>> >   .foot 
>> > a{font-size:10px;color:#00;}table.center{margin-left:auto;margin-right:auto;}> >  http-equiv="Expires" content="0">> >   "Pragma" content="no-cache">> > href="https://opensips.org/favicon.png;>.> > 

Re: [OpenSIPS-Users] Opensips-cp 8.3.0 HTTP/1.1 400 Bad Request..

[Mario San Vicente]

Hello Răzvan /  Ovidiu,

After disabling mi_html, my CP is working fine, i will be enabling more
modules on it.   Thanks for your help!

Ovidiu,   It would be good to have both portals running,but  i am not
getting to work the following comment:
"If you want to keep mi_html, then set a different root
path: #modparam("mi_html", "root", "osips_mi")  ", any other hint?

Thank you!





On Tue, Nov 3, 2020 at 8:22 AM Ovidiu Sas  wrote:

> Hello Mario,
>
> It seems that you have both mi_http and mi_html modules loaded.
> By default, both modules have the root path set to mi and one of the
> modules is stealing the root path from the other.
> In your case, when you hit http://x.x.x.x:/mi , you are hitting a
> standalone management interface that is not part of opensips-cp. It's
> an alternative way to run mi commands through a web interface.
>
> If you want to have only opensips-cp, then umload mi_html.
> If you want to keep mi_html, then set a different root path:
> #modparam("mi_html", "root", "osips_mi")
>
> Hope this helps,
> Ovidiu
>
> On Sat, Oct 31, 2020 at 1:58 PM Mario San Vicente
>  wrote:
> >
> > Hello  Răzvan ,
> > I was wrong with my diagnosis, cause i stopped receiving the http / 400
> error.  But when trying to monitor calls i see that the portal is not
> reflecting the real info, i tested dialogs and rtpproxy.
> > I do see the json reply on a trace, but it is not updated on the portal:
> >
> > T 127.0.0.1:47632 -> 127.0.0.1: [AP] #137
> >   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type:
> application/json..Content-Length:
> 49{"jsonrpc":"2.0","id":1,"method":"rtpproxy_
> >   show"}"id..._";i#4
> > #
> > T 127.0.0.1: -> 127.0.0.1:47632 [A] #138
> >   ..._..k#)...
> > #
> > T 127.0.0.1: -> 127.0.0.1:47632 [AP] #139
> >   HTTP/1.1 200 OK..Content-Length: 136..Content-Type:
> application/json..Date: Sat, 31 Oct 2020 17:34:22
> GMT{"jsonrpc":"2.0","result":[{"Set":0,"Nodes
> >
>  
> ":[{"url":"udp:localhost:2123","index":0,"disabled":0,"weight":1,"recheck_ticks":0}]}],"id":1}.._..k#4
> > 
> > T 127.0.0.1:47644 -> 127.0.0.1: [AP] #204
> >   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type:
> application/json..Content-Length:
> 78{"jsonrpc":"2.0","id":1,"method":"dlg_list"
> >   ,"params":{"index":0,"counter":20}}._J.
> > #
> > T 127.0.0.1: -> 127.0.0.1:47644 [A] #205
> >   @.._
> > #
> > T 127.0.0.1: -> 127.0.0.1:47644 [AP] #206
> >   HTTP/1.1 200 OK..Content-Length: 58..Content-Type:
> application/json..Date: Sat, 31 Oct 2020 17:42:14
> GMT{"jsonrpc":"2.0","result":{"count":0,"Dialo
> >   gs":[]},"id":1}._4...4.
> >
> > Aside notes:
> > When enabling this line #modparam("mi_http", "root", "opensips_mi") , i
> can see the mi portal.  http://x.x.x.x:/mi , which has lots of
> aditional info,  but i have to disable it to get the json response and just
> get an http response pointing to the mi interface:
> > T 127.0.0.1: -> 127.0.0.1:47654 [AP] #256
> >   HTTP/1.1 200 OK..Content-Length: 1886..Content-Type: text/html..Date:
> Sat, 31 Oct 2020 17:55:45 GMTOpenSIPS Management
> Interface
> >type="text/css">body{margin:0;}body,p,div,td,th,tr,form,ol,ul,li,input,textarea,select,a{font-family:"lucida
> grande",verdana,geneva,aria
> >
>  
> l,helvetica,sans-serif;font-size:14px;}a:hover{text-decoration:none;}a{text-decoration:underline;}.foot{padding-top:40px;font-size:10px;color:#33;}
> >   .foot
> a{font-size:10px;color:#00;}table.center{margin-left:auto;margin-right:auto;} http-equiv="Expires" content="0"> >   "Pragma" content="no-cache">https://opensips.org/favicon.png;>. bgcolor="#ff" l
> >   ink="#00" text="#00" vlink="#00"> cellpadding="5" width="100%%" border="0"> colspan=2 valign
> >   ="top" align="left" bgcolor="#EFF7FF" width="100%%"> align="center">OpenSIPS MI HTML InterfaceOpenSIPS
> (3.1.0-dev (x86_6
> >   4/linux)) is running since Sat Oct 31 11:55:35
> 2020.. cellpadding="3" cellspacing="0"> >   >.statistics. href='/mi/core'>core. href='/mi/blacklists'>blacklists.httpd.tm. href='/mi/usrloc'>usrloc. href='/mi/dialog'>dialog.nathelper. href='/mi/rtpproxy'>rtpproxy. href='/mi/db_text'>db_text.drouti
> >   ng class="foot" style="margin:20px auto"> style='margin-left:5px;'>OpenSIPS web siteCopyright 
> 2011-2015 http://www.voipembedded.com/;>VoIP Embedded, Inc..
> All rights res
> >   erved!.._X.t.4
> >
> > Thank in advace.
> >
> >
> > On Fri, Oct 30, 2020 at 8:45 PM Mario San Vicente <
> mrsanvice...@gmail.com> wrote:
> >>
> >> Hello  Răzvan ,
> >>
> >> Thanks alot, that made the trick.
> >>
> >> I will check if something is not matching with the monit page cause
> that is not working ,  but that's another story.
> >>
> >> Best regards.
> >> Mario
> >>
> >>
> >>
> >>
> >>
> >> On Thu, Oct 29, 2020 at 3:49 AM Răzvan Crainea 
> wrote:
> >>>
> >>> As I see in your logs, OpenSIPS CP uses the 

Re: [OpenSIPS-Users] Opensips-cp 8.3.0 HTTP/1.1 400 Bad Request..

[Ovidiu Sas]

Hello Mario,

It seems that you have both mi_http and mi_html modules loaded.
By default, both modules have the root path set to mi and one of the
modules is stealing the root path from the other.
In your case, when you hit http://x.x.x.x:/mi , you are hitting a
standalone management interface that is not part of opensips-cp. It's
an alternative way to run mi commands through a web interface.

If you want to have only opensips-cp, then umload mi_html.
If you want to keep mi_html, then set a different root path:
#modparam("mi_html", "root", "osips_mi")

Hope this helps,
Ovidiu

On Sat, Oct 31, 2020 at 1:58 PM Mario San Vicente
 wrote:
>
> Hello  Răzvan ,
> I was wrong with my diagnosis, cause i stopped receiving the http / 400 
> error.  But when trying to monitor calls i see that the portal is not 
> reflecting the real info, i tested dialogs and rtpproxy.
> I do see the json reply on a trace, but it is not updated on the portal:
>
> T 127.0.0.1:47632 -> 127.0.0.1: [AP] #137
>   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
> application/json..Content-Length: 
> 49{"jsonrpc":"2.0","id":1,"method":"rtpproxy_
>   show"}"id..._";i#4
> #
> T 127.0.0.1: -> 127.0.0.1:47632 [A] #138
>   ..._..k#)...
> #
> T 127.0.0.1: -> 127.0.0.1:47632 [AP] #139
>   HTTP/1.1 200 OK..Content-Length: 136..Content-Type: application/json..Date: 
> Sat, 31 Oct 2020 17:34:22 GMT{"jsonrpc":"2.0","result":[{"Set":0,"Nodes
>   
> ":[{"url":"udp:localhost:2123","index":0,"disabled":0,"weight":1,"recheck_ticks":0}]}],"id":1}.._..k#4
> 
> T 127.0.0.1:47644 -> 127.0.0.1: [AP] #204
>   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
> application/json..Content-Length: 
> 78{"jsonrpc":"2.0","id":1,"method":"dlg_list"
>   ,"params":{"index":0,"counter":20}}._J.
> #
> T 127.0.0.1: -> 127.0.0.1:47644 [A] #205
>   @.._
> #
> T 127.0.0.1: -> 127.0.0.1:47644 [AP] #206
>   HTTP/1.1 200 OK..Content-Length: 58..Content-Type: application/json..Date: 
> Sat, 31 Oct 2020 17:42:14 GMT{"jsonrpc":"2.0","result":{"count":0,"Dialo
>   gs":[]},"id":1}._4...4.
>
> Aside notes:
> When enabling this line #modparam("mi_http", "root", "opensips_mi") , i can 
> see the mi portal.  http://x.x.x.x:/mi , which has lots of aditional 
> info,  but i have to disable it to get the json response and just get an http 
> response pointing to the mi interface:
> T 127.0.0.1: -> 127.0.0.1:47654 [AP] #256
>   HTTP/1.1 200 OK..Content-Length: 1886..Content-Type: text/html..Date: Sat, 
> 31 Oct 2020 17:55:45 GMTOpenSIPS Management Interface
>type="text/css">body{margin:0;}body,p,div,td,th,tr,form,ol,ul,li,input,textarea,select,a{font-family:"lucida
>  grande",verdana,geneva,aria
>   
> l,helvetica,sans-serif;font-size:14px;}a:hover{text-decoration:none;}a{text-decoration:underline;}.foot{padding-top:40px;font-size:10px;color:#33;}
>   .foot 
> a{font-size:10px;color:#00;}table.center{margin-left:auto;margin-right:auto;}  http-equiv="Expires" content="0">   "Pragma" content="no-cache"> href="https://opensips.org/favicon.png;>. bgcolor="#ff" l
>   ink="#00" text="#00" vlink="#00"> cellpadding="5" width="100%%" border="0"> valign
>   ="top" align="left" bgcolor="#EFF7FF" width="100%%"> align="center">OpenSIPS MI HTML InterfaceOpenSIPS 
> (3.1.0-dev (x86_6
>   4/linux)) is running since Sat Oct 31 11:55:35 
> 2020.. cellpadding="3" cellspacing="0">   >.statistics. href='/mi/core'>core. href='/mi/blacklists'>blacklists.httpd.tm. href='/mi/usrloc'>usrloc. href='/mi/dialog'>dialog.nathelper. href='/mi/rtpproxy'>rtpproxy. href='/mi/db_text'>db_text.drouti
>   ng class="foot" style="margin:20px auto"> style='margin-left:5px;'>OpenSIPS web siteCopyright  2011-2015  href="http://www.voipembedded.com/;>VoIP Embedded, Inc.. All rights res
>   erved!.._X.t.4
>
> Thank in advace.
>
>
> On Fri, Oct 30, 2020 at 8:45 PM Mario San Vicente  
> wrote:
>>
>> Hello  Răzvan ,
>>
>> Thanks alot, that made the trick.
>>
>> I will check if something is not matching with the monit page cause that is 
>> not working ,  but that's another story.
>>
>> Best regards.
>> Mario
>>
>>
>>
>>
>>
>> On Thu, Oct 29, 2020 at 3:49 AM Răzvan Crainea  wrote:
>>>
>>> As I see in your logs, OpenSIPS CP uses the `json` URL path for querying
>>> MI, whereas the default root path is `mi`[1]. Either change the `root`
>>> to `json`, or modify your OpenSIPS CP boxes config to `mi`.
>>>
>>> [1] https://opensips.org/docs/modules/3.1.x/mi_http.html#param_root
>>>
>>> Best regards,
>>>
>>> Răzvan Crainea
>>> OpenSIPS Core Developer
>>> http://www.opensips-solutions.com
>>>
>>> On 10/28/20 11:23 PM, Mario San Vicente wrote:
>>> >Thanks for the answer Johan,
>>> >
>>> > But i see that; the *mi_json* module has been renamed to
>>> > *mi_http* module.  and so: failed to load module mi_json.so
>>> > 

Re: [OpenSIPS-Users] Opensips-cp 8.3.0 HTTP/1.1 400 Bad Request..

[Răzvan Crainea]

I am not sure why you're saying it is not reflecting the real info - I 
can see the MI returning data for rtpproxy, are you sure that's not 
correct? And you're probably not having any ongoing calls, that's why 
dlg_list returns 0.
Running MI HTTP is a completely different story, what you're showing us 
is probably the output of the `which` command, enclosed in HTTP tags; 
you should try to run the `which` command as well through the CP, to 
have a comparison ground.

But I believe your setup is OK now.

Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 10/31/20 7:57 PM, Mario San Vicente wrote:

Hello Răzvan ,
I was wrong with my diagnosis, cause i stopped receiving the http / 400 
error.  But when trying to monitor calls i see that the portal is not 
reflecting the real info, i tested dialogs and rtpproxy.

I do see the json reply on a trace, but it is not updated on the portal:

T 127.0.0.1:47632  -> 127.0.0.1: 
 [AP] #137
   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
application/json..Content-Length: 
49{"jsonrpc":"2.0","id":1,"method":"rtpproxy_

   show"}"id..._";i#4
#
T 127.0.0.1:  -> 127.0.0.1:47632 
 [A] #138

   ..._..k#)...
#
T 127.0.0.1:  -> 127.0.0.1:47632 
 [AP] #139
   HTTP/1.1 200 OK..Content-Length: 136..Content-Type: 
application/json..Date: Sat, 31 Oct 2020 17:34:22 
GMT{"jsonrpc":"2.0","result":[{"Set":0,"Nodes
   
":[{"url":"udp:localhost:2123","index":0,"disabled":0,"weight":1,"recheck_ticks":0}]}],"id":1}.._..k#4


T 127.0.0.1:47644  -> 127.0.0.1: 
 [AP] #204
   POST /mi HTTP/1.1..Host: 127.0.0.1:..Accept: */*..Content-Type: 
application/json..Content-Length: 
78{"jsonrpc":"2.0","id":1,"method":"dlg_list"

   ,"params":{"index":0,"counter":20}}._J.
#
T 127.0.0.1:  -> 127.0.0.1:47644 
 [A] #205

   @.._
#
T 127.0.0.1:  -> 127.0.0.1:47644 
 [AP] #206
   HTTP/1.1 200 OK..Content-Length: 58..Content-Type: 
application/json..Date: Sat, 31 Oct 2020 17:42:14 
GMT{"jsonrpc":"2.0","result":{"count":0,"Dialo

   gs":[]},"id":1}._4...4.

Aside notes:
When enabling this line #modparam("mi_http", "root", "opensips_mi") , i 
can see the mi portal. http://x.x.x.x:/mi , which has lots of 
aditional info,  but i have to disable it to get the json response and 
just get an http response pointing to the mi interface:
T 127.0.0.1:  -> 127.0.0.1:47654 
 [AP] #256
   HTTP/1.1 200 OK..Content-Length: 1886..Content-Type: text/html..Date: 
Sat, 31 Oct 2020 17:55:45 GMTOpenSIPS Management 
Interface
   type="text/css">body{margin:0;}body,p,div,td,th,tr,form,ol,ul,li,input,textarea,select,a{font-family:"lucida 
grande",verdana,geneva,aria
   
l,helvetica,sans-serif;font-size:14px;}a:hover{text-decoration:none;}a{text-decoration:underline;}.foot{padding-top:40px;font-size:10px;color:#33;}
   .foot 
a{font-size:10px;color:#00;}table.center{margin-left:auto;margin-right:auto;}http-equiv="Expires" content="0">   "Pragma" content="no-cache">href="https://opensips.org/favicon.png;>.bgcolor="#ff" l
   ink="#00" text="#00" vlink="#00">cellpadding="5" width="100%%" border="0">colspan=2 valign
   ="top" align="left" bgcolor="#EFF7FF" width="100%%">align="center">OpenSIPS MI HTML InterfaceOpenSIPS 
(3.1.0-dev (x86_6
   4/linux)) is running since Sat Oct 31 11:55:35 
2020..cellpadding="3" cellspacing="0">   >.statistics.href='/mi/core'>core.href='/mi/blacklists'>blacklists.httpd.tm.href='/mi/usrloc'>usrloc.href='/mi/dialog'>dialog.nathelper.href='/mi/rtpproxy'>rtpproxy.href='/mi/db_text'>db_text.drouti
   ngclass="foot" style="margin:20px auto">style='margin-left:5px;'>http://opensips.org>">OpenSIPS web 
siteCopyright  2011-2015 href="http://www.voipembedded.com/;>VoIP Embedded, Inc.. All rights res

   erved!.._X.t.4

Thank in advace.


On Fri, Oct 30, 2020 at 8:45 PM Mario San Vicente 
mailto:mrsanvice...@gmail.com>> wrote:


Hello Răzvan ,

Thanks alot, that made the trick.

I will check if something is not matching with the monit page cause
that is not working ,  but that's another story.

Best regards.
Mario




On Thu, Oct 29, 2020 at 3:49 AM Răzvan Crainea mailto:raz...@opensips.org>> wrote:

As I see in your logs, OpenSIPS CP uses the `json` URL path for
querying
MI, whereas the default root path is `mi`[1]. Either change the
`root`
to `json`, or modify your OpenSIPS CP boxes config to `mi`.

[1]