Re: [ovirt-users] ovirt 3.6 centos7.2 all-in-one install: The VDSM host was found in a failed state.

Progress: I managed to get a host setup and then a vm setup on the host, but the VM won't start. I'm looking for some help getting the VM to start. Details... I was able to work around the VDSM host in a failed state issue (I think), by doing a host reinstall from the engine web GUI, after

Re: [ovirt-users] Network instability after upgrade 3.6.0 -> 3.6.1

Stefano, I am currently experiencing the same issue. 2x nic lacp config at switch, mode 4 bond at server with no connectivity. Interestingly I am able to ping the switch itself. I haven't had time to investigate thoroughly but my first thought is an update somewhere. Did you ever resolve and

Re: [ovirt-users] R: Re: Network instability after upgrade 3.6.0 -> 3.6.1

Hi Stefano, It's definitely not the switch, it seems to be the latest kernel package (kernel-3.10.0-327.3.1.el7.x86_64) which stops bonding working correctly, reverting back to the previous kernel brings the network up in 802.3ad mode (4). I know, from reading the release notes of 7.2, that

Re: [ovirt-users] oVirt 3.6.1 ISO storage domain with all-in-one local disk install not working as expected

Hello Matthew, i got similar problem, but this howto works for me :http://taste-of-it.de/ovirt-all-in-one-installation-auf-centos-7/ Hope it works for you too. Taste Am 2015-12-29 23:02, schrieb Matthew Bohnsack: Hello, I installed an all-in-one oVirt 3.6.1 system on CentOS 7.2 with local

[ovirt-users] Reply: host xxx did no satisfy internal filter Memory because its swap value was illegal.

Hi Doron,Thank you, I will do things like "swapoff" later. 1) Just a little confused about how to caculate the value.###and I quote,And in your case we see the value is > 0.This means that swap_total < (swap_free+mem_available) or in generalyour host is swapping.###data in my

[ovirt-users] oVirt 3.6.1 ISO storage domain with all-in-one local disk install not working as expected

Hello, I installed an all-in-one oVirt 3.6.1 system on CentOS 7.2 with local disk configured for images and ISOs. However, the engine web GUI doesn't mention the ISO_DOMAIN, and I can't seem to select an uploaded ISO and attach it to a VM. Any idea what I'm doing wrong here? Thanks, -Matthew

Re: [ovirt-users] Self-hosted engine: Host cannot activate - network issues

Everything seems to be good. The install created the "ovirtmgmt" bridge without any issue. At one point after I did the 'engine-setup', I thought the host got stuck, as it seemed to stay on "[INFO] Connecting to the engine" for quite a bit of time, but my "screen" session just got

Re: [ovirt-users] ovirt 3.6 centos7.2 all-in-one install: The VDSM host was found in a failed state.

I temporarily moved beyond both my issues with the VDSM host needing to be reinstalled from the engine GUI and VMs not starting by doing a fresh all-in-one install without any of our configuration management stuff. I.e., it worked fine when I installed on top of a fresh CentOS 7.2 ISO install.

Re: [ovirt-users] Self-hosted engine: Host cannot activate - network issues

On Tue, Dec 29, 2015 at 9:19 PM, Alan Murrell wrote: > Everything seems to be good. The install created the "ovirtmgmt" bridge > without any issue. At one point after I did the 'engine-setup', I thought > the host got stuck, as it seemed to stay on "[INFO] Connecting to the >

[ovirt-users] Reply: host xxx did no satisfy internal filter Memory because its swap value was illegal.

Hi Doron, [repost...I forgot to change html to plain test again when I replied a few hours ago...sorry about the format..] Thank you, I disabled swap on hosts, and migrated 2 vms from n33 to n34 an hour ago, everything's fine. 1) Just a little confused about how to caculate the value. ###and

Re: [ovirt-users] oVirt 3.6: Dummy interfaces

On Mon, Dec 28, 2015 at 03:11:29PM -0800, Alan Murrell wrote: > Hi Frank, > > Thanks for info! Does your script automatically load the dummy module as > well, or do you create a separate file in '/etc/modprobe.d' to load it > (that's how I currently do my dummy NICs) > > Thanks! :-) > >

Re: [ovirt-users] oVirt 3.6.1 USB Host Device passthrough

Hi All, just to let you know that I have tested the 3.6.2 RC1 and I can confirm that both problems are fixed with this version. 1. USB device list get refreshed automatically 2. USB device could be attached to the VM through the frontend So looking forward for the final release of 3.6.2!

Re: [ovirt-users] Self-hosted engine: Host cannot activate - network issues

On Tue, Dec 29, 2015 at 9:56 AM, Alan Murrell wrote: > On 28/12/2015 11:29 PM, Yedidyah Bar David wrote: >> >> Did you principally do exactly the same thing in 3.5 and 3.6? > > > I did. I basically followed "Up and Running with oVirt 3.5", except I used > 3.6 packages. > >> In

Re: [ovirt-users] Self-hosted engine: Host cannot activate - network issues

On 28/12/2015 11:29 PM, Yedidyah Bar David wrote: Did you principally do exactly the same thing in 3.5 and 3.6? I did. I basically followed "Up and Running with oVirt 3.5", except I used 3.6 packages. In both cases just had a simple network interface (no vlan/bonding/whatever) and input

Re: [ovirt-users] Hosted engine vs. hypervisor hosts naming on hyperconverged setup

On Tue, Dec 29, 2015 at 3:44 PM, Will Dennis wrote: > Would like to get this issue settled before I move on… Should I expect to see > the hosted engine VM showing up in the “VMs” node, or is it a “hidden” VM > because of it’s special status? This is tracked in the

[ovirt-users] Hosted engine support

HI Installed KVM in the host in which VT is enabled . installed one vm centos6.7 64 bit in the KVM server and tried to configure Hosted engine ,getting the below error , *"Failed to execute stage ‘Environment Customization’: Hardware virtualization support is not available :please check BIOS

Re: [ovirt-users] Hosted engine vs. hypervisor hosts naming on hyperconverged setup

Would like to get this issue settled before I move on… Should I expect to see the hosted engine VM showing up in the “VMs” node, or is it a “hidden” VM because of it’s special status? Also, I see that I can change the name of the 1st host if I select it in the “Hosts” node, and choose “Edit”…

Re: [ovirt-users] Change "ovirt-engine" virtual directory

- Original Message - > From: "Hamid Mazrae Mollaie" > To: "Alon Bar-Lev" > Cc: users@ovirt.org > Sent: Tuesday, December 29, 2015 11:54:58 AM > Subject: Re: [ovirt-users] Change "ovirt-engine" virtual directory > > tank you for reply > but

Re: [ovirt-users] Self-hosted engine: Host cannot activate - network issues

On 29/12/2015 12:17 AM, Yedidyah Bar David wrote: In principle pre-creating the bridge should work, but is not commonly tested. Perhaps you also had issues with NetworkManager? After I do the minimal install I always stop and disable NetworkManager (and firewalld), anfd in the ifcfg-* files

Re: [ovirt-users] Change "ovirt-engine" virtual directory

tank you for reply but unfortunately branding does not change "ovirt-engine" in webadmin url path On Mon, Dec 28, 2015 at 2:18 PM, Alon Bar-Lev wrote: > > > - Original Message - > > From: "Hamid Mazrae Mollaie" > > To: users@ovirt.org > > Sent:

Re: [ovirt-users] Hosted engine vs. hypervisor hosts naming on hyperconverged setup

Also, just noticed that I’m getting the message “The Hosted Engine Storage Domain isn’t Active” in the Events pane, but I do not see that domain anywhere now in the Storage node in the Datacenter… What must I do to activate this? On Dec 29, 2015, at 8:44 AM, Will Dennis

Re: [ovirt-users] virt-viewer error

1. Which component "Can not find the specified file" (in other words, where does this error is shown) ? 2. What's the client's OS ? 3. Did they run virt-viewer from command-line/user-portal/other ? Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor

Re: [ovirt-users] host xxx did no satisfy internal filter Memory because its swap value was illegal.

On Tue, Dec 29, 2015 at 5:54 AM, pc wrote: > [sorry, this is my first time to use mailing list, repost again, with > content from html to plain text] > > ### Description ### > 1. problem > 1) migrate vm {name:xyz001, mem(min, max) = (2G,4G)} from ovirt host n33 > to n34, failed.

Re: [ovirt-users] Hosted engine support

On Tue, Dec 29, 2015 at 1:04 PM, Budur Nagaraju wrote: > HI > > Installed KVM in the host in which VT is enabled . > installed one vm centos6.7 64 bit in the KVM server and tried to configure > Hosted engine ,getting the below error , > > "Failed to execute stage ‘Environment