Hi guys,
I'm running FC storage with 4 hosts on oVirt 3.6 and we've been having some
IOPS issues recently and the SAN provider has asked me to provide them with
the following info...
Datastore Stripe Size
Default VM Disk Stripe Size
Average IO Size
Average THROUGHPUT (MB/s)
Average IOPS
Maximum
Hi Adam,
Le 04/10/2017 à 16:48, Adam Litke a écrit :
Sure. vdsm-tool should be disabling lvmetad on the host automatically.
Maybe some of the hosts were fresh installed and others have been
upgraded from older versions? In any case, you should be able to run on
any host in maintenance
On Thu, Oct 5, 2017 at 10:15 AM, Fabrice Bacchella <
fabrice.bacche...@orange.fr> wrote:
> I have HP blades too (ProLiant BL460c Gen9). I have set the fencing to
> ilo4 and everything works fine.
>
> Nothing special on the ilo side, just up to date firmware.
>
>
Also these blades are BL460c Gen9
Same here. I'm only ensuring ilo4 is up to date and ovirtmgmt network
can reach ilo network.
On Thu, Oct 5, 2017 at 10:15 AM, Fabrice Bacchella
wrote:
> I have HP blades too (ProLiant BL460c Gen9). I have set the fencing to ilo4
> and everything works fine.
>
>
On Thu, Oct 5, 2017 at 9:53 AM, Gianluca Cecchi
wrote:
> Hello,
> on 4.1.6 I'm configuring fencing on HP blades Gen9.
> It seems I'm able to use ilo_ssh as agent and that I have only to set 22
> as the port and ssh=1 in options
>
> Question: why ssh=1??? the agent is
Haha it is rather crappy.
It was very cheap in comparison to Dell's and HP's etc at the time, and
it's over 6 years old now so it's done quite well considering the price.
The brand is Cipherwave which I think is a rebrand of some other brand,
very basic GUI and features.
So is there no way to
On tor, 2017-10-05 at 08:27 +0200, Neil wrote:
> Hi guys,
>
> I'm running FC storage with 4 hosts on oVirt 3.6 and we've been
> having some IOPS issues recently and the SAN provider has asked me to
> provide them with the following info...
>
> Datastore Stripe Size
> Default VM Disk Stripe Size
Hi Karli,
I was hoping that too, but it seems the SAN doesn't have these features.
There is only the 4 oVirt hosts connected to it via 8GB FC.
I see oVirt has Storage QOS, but how do we set Storage QOS without knowing
the maximum storage limits? Perhaps I'm misunderstood this...
Thanks.
Hello,
on 4.1.6 I'm configuring fencing on HP blades Gen9.
It seems I'm able to use ilo_ssh as agent and that I have only to set 22 as
the port and ssh=1 in options
Question: why ssh=1??? the agent is named ilo_ssh shouldn't be
obvious???
The same form command line I MUST set -x even if I use
On tor, 2017-10-05 at 09:45 +0200, Neil wrote:
> Hi Karli,
>
> I was hoping that too, but it seems the SAN doesn't have these
> features.
Wow, that´s kind of a crappy storage, no offense. What´s the brand, so
we can stay clear of it? :)
/K
>
> There is only the 4 oVirt hosts connected to it
On Thu, Oct 5, 2017 at 11:04 AM, Martin Perina wrote:
>
>
>
> Please take a look at man page of fence_ilo_ssh and scroll down to STDIN
> PARAMETERS section. These parameters needs to be used in Options field in
> webadmin
>
>
It seems on ovirt node the man pages are
On tor, 2017-10-05 at 10:10 +0200, Neil wrote:
> Haha it is rather crappy.
>
> It was very cheap in comparison to Dell's and HP's etc at the time,
> and it's over 6 years old now so it's done quite well considering the
> price.
>
> The brand is Cipherwave which I think is a rebrand of some other
I have HP blades too (ProLiant BL460c Gen9). I have set the fencing to ilo4 and
everything works fine.
Nothing special on the ilo side, just up to date firmware.
> Le 5 oct. 2017 à 09:53, Gianluca Cecchi a écrit :
>
> Hello,
> on 4.1.6 I'm configuring fencing on HP
Good night friends, I'm trying to make the passtrought GPU run using OVIRT
with an NVIDIA M2000 / K2200 and a K4000, I made several configurations,
the VM with windows recognizes the card, I install the NVIDIA drivers and
after restarting the windows and access using the client SPICE remote viwer
Dear All,
We are using oVirt release *Version 4.1.5.2. *I was trying to make a clone
of a VM but I got the following message* "*Error while executing action
CloneVm: Internal Engine Error", I found that when cloud-init is used in
the vm's edit section, this error occurs, but when the vm is
Hello!
On Thu, Oct 5, 2017 at 12:21 AM, Bryan Sockel wrote:
> Is there any performance loss from your if your gluster replica 3 servers
> are not all the same configuration?
>
>
> Server 1 - Primary
> 16 X 1.2 TB 10k Drives - Raid 10 - Stripe 256k (2.5 Drives)
> 1 CPU -
Hi Guillaume!
Welcome to the oVirt community! I'm sorry to hear you're having problems.
The node project [1] isn't really intended to be used as a stand-alone
product. It's purpose is to provide a minimal host environment that's
managed by the oVirt engine, which is the heart of the oVirt
On Thu, Oct 5, 2017 at 11:38 AM, Gianluca Cecchi
wrote:
> On Thu, Oct 5, 2017 at 11:04 AM, Martin Perina wrote:
>
>>
>>
>>
>> Please take a look at man page of fence_ilo_ssh and scroll down to
>> STDIN PARAMETERS section. These parameters needs
On Thu, Oct 5, 2017 at 3:28 PM, Phillip Bailey wrote:
> Hi Guillaume!
>
> Welcome to the oVirt community! I'm sorry to hear you're having problems.
>
> The node project [1] isn't really intended to be used as a stand-alone
> product. It's purpose is to provide a minimal host
Hello,
I'm a Systems Administrator at Wolfram Research, and we've been having an issue
with a Windows 7 x64 VM. This is a new VM with a newly created Cinder VM image
attached to it, which was working without issue last week. Earlier today I
performed a Windows update and shutdown the VM.
Full /etc/sasl2/libvirt.conf:
mech_list: digest-md5
sasldb_path: /etc/libvirt/passwd.db
Also note that VDSM has to be patched to work on 7.4 with no issues. oVirt 3.6
and 4.1 have required fixes, but oVirt 4.0 doesn’t.
On 04/10/2017, 18:44, "users-boun...@ovirt.org on behalf of Alan Griffiths"
Hello,
I'm a Systems Administrator at Wolfram Research, and we've been having an issue
with a Windows 7 x64 VM. This is a new VM with a newly created Cinder VM image
attached to it, which was working without issue last week. Earlier today I
performed a Windows update and shutdown the VM.
בתאריך יום ה׳, 5 באוק׳ 2017, 11:39, מאת Nicolas Ecarnot <
nico...@ecarnot.net>:
> Hi Adam,
>
>
> Le 04/10/2017 à 16:48, Adam Litke a écrit :
> > Sure. vdsm-tool should be disabling lvmetad on the host automatically.
> > Maybe some of the hosts were fresh installed and others have been
> >
I'm having some issues granting permissions to AD users in ovirt-engine
4.1. Users can log in but receive an error as below.
The user u...@example.com@example.com is not authorized to perform login
I am also not able to grant this user any permissions through the admin
console. Entering a user
Hi,
it seems that you have an error in your aaa-ldap configuration. Could you
please share your engine.log and your aaa-ldap configuration?
Thanks
Martin Perina
On Thu, Oct 5, 2017 at 9:08 PM, Michael Watters wrote:
> I'm having some issues granting permissions to AD
On Oct 5, 2017 10:53 AM, "Karli Sjöberg" wrote:
On tor, 2017-10-05 at 10:10 +0200, Neil wrote:
> Haha it is rather crappy.
>
> It was very cheap in comparison to Dell's and HP's etc at the time,
> and it's over 6 years old now so it's done quite well considering the
> price.
I actually reran the ovirt-engine-extension-aaa-ldap-setup tool and was
able to login and complete a search successfully but doing the same
thing in the engine UI fails.
Here's the configuration from the .properties file.
include =
vars.domain = example.com
vars.user = ldapu...@example.com
Any idea how this can be addressed?
On Sep 19, 2017 23:07, "Alex K" wrote:
Hi all,
I am trying to get the VM console of a VM through SSH socks proxy.
This is a scenario I will frequently face, as the ovirt cluster will be
available only though a remote SSH tunnel.
I
28 matches
Mail list logo