On Wed, May 23, 2018 at 2:43 PM, Peter Harman
wrote:
> Ovirt Community,
>
>
>
> First off: thank you – these emails have helped me to get Ovirt running. I
> barely know what I am doing but learning quickly.
>
>
>
> I am trying to do a network separation and confusing myself. I have two
> physical
2018-05-23 18:45 GMT+02:00 WK :
>
>
> On 5/23/2018 7:57 AM, Sandro Bonazzola wrote:
>
>>
>>
>> Please note that to fully mitigate this vulnerability, system
>> administrators must apply both hardware “microcode” updates and software
>> patches that enable new functionality.
>> At this time, microp
> On 23 May 2018, at 18:45, WK wrote:
>
>
>
> On 5/23/2018 7:57 AM, Sandro Bonazzola wrote:
>>
>>
>> Please note that to fully mitigate this vulnerability, system administrators
>> must apply both hardware “microcode” updates and software patches that
>> enable new functionality.
>> At th
On Thu, May 24, 2018 at 10:08 AM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
[snip]
> >
> > Intel has been promising microcode updates since January when Spectre
> first appeared and yet except for the very newest CPUs we haven't seen
> anything and in the cases of older CPUs, I wonde
hi,
I have the same error when I try to restore on a new hosted VM (ovirt 4.2.3)
Have you a solution ?
Emmanuel
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Hi,
hosted engine does not care about disks. Gluster might, but I do not
know enough about best practice brick layout there, sorry.
Martin
On Wed, May 23, 2018 at 11:44 AM, femi adegoke wrote:
> Must all 7 hosts have the same amount of storage/number of disks?
>
Hi
There is a BZ with a similar issue:
https://bugzilla.redhat.com/show_bug.cgi?id=1546839
To sum things up, try stopping the network manager and restarting your
network if you are using a RH distribution, e,g. :
systemctl stop NetworkManager
systemctl restart network
And check what is your ker
Hi,
Excuse the English :)
Need some advice regarding the use of high availability software on VMs on
oVirt.
We are migrating a physical high available application to oVirt.
The HA platform uses pacemaker, it contains two nodes and a shared storage,
fence (stonith) is configured to use ILO.
I kn
I did not run the hosted engine setup again.
I only ran it once during the initial setup.
Did I send the wrong set of logs?
On 2018-05-22 07:08, Simone Tiraboschi wrote:
On Tue, May 22, 2018 at 6:19 AM, wrote:
I have attached the logs in case you can find anything
The upgrade to all 3 nodes g
Hello,
We've been trying to setup oVirt environment for few days but we have issue
with hosted-engine-setup (ansible script).
We managed to fix few small things and have them merged upstream but
unfortunately right now the installation process fails on getting host facts.
It looks like it cannot
hi,
I follow this doc
https://www.ovirt.org/documentation/self-hosted/chap-Backing_up_and_Restoring_an_EL-Based_Self-Hosted_Environment/
But like others, i can't restore database
I Have :
pg_restore: [archiver (db)] Error while PROCESSING TOC:
pg_restore: [archiver (db)] Error from TOC entry 7
*As part of an oVirt project review, we're publishing an updated privacy
policy.You should read the statement fully, but the key updates include:*
Clearer descriptions of how oVirt uses your personal data to provide
services;* Additional detail on how your personal data may be shared to
serve the p
*As part of an oVirt project review, we're publishing an updated privacy
policy.You should read the statement fully, but the key updates include:*
Clearer descriptions of how oVirt uses your personal data to provide
services;* Additional detail on how your personal data may be shared to
serve the p
The oVirt Project is pleased to announce the availability of the oVirt
4.2.4 First Release Candidate, as of May 24th, 2018
This update is a release candidate of the fourth in a series of
stabilization updates to the 4.2
series.
This is pre-release software. This pre-release should not to be used i
On Wed, May 23, 2018 at 8:35 AM, Mariusz Kozakowski <
mariusz.kozakow...@dsg.dk> wrote:
> Hello,
>
> We've been trying to setup oVirt environment for few days but we have
> issue with hosted-engine-setup (ansible script).
> We managed to fix few small things and have them merged upstream but
> unf
Hi,
adding also Didi here.
We'll try to reproduce, in the mean time, can you please share
engine-backup logs at backup and restore times?
thanks
On Wed, May 23, 2018 at 2:20 PM, thetas emmanuel <
emmanuel.the...@obs-nancay.fr> wrote:
> hi,
>
> I follow this doc
>
> https://www.ovirt.org/documenta
Hi Mariusz,
I'm sorry to hear you're having issues. Could you please provide a link to
a pastebin or something similar for the full log file?
Thanks!
-Phillip Bailey
On Wed, May 23, 2018 at 2:35 AM, Mariusz Kozakowski <
mariusz.kozakow...@dsg.dk> wrote:
> Hello,
>
> We've been trying to setup
On Wed, May 23, 2018 at 5:43 PM, <03ce...@gmail.com> wrote:
> I have self-hosted-engine (4.2) deployed successfully on cento (7.4)
> server.
>
> The physical server has 'ovirt' as hostname and the self-hosted engineVM
> deployed
> and running on it has 'engine.ovirt' as fdqn.
>
> I can successfull
On Thu, May 24, 2018 at 2:09 PM, Sandro Bonazzola
wrote:
> The oVirt Project is pleased to announce the availability of the oVirt
> 4.2.4 First Release Candidate, as of May 24th, 2018
>
>
>
[snip]
> Additional Resources:
> * Read more about the oVirt 4.2.4 release highlights:http://www.ovirt.
>
2018-05-24 14:51 GMT+02:00 Gianluca Cecchi :
> On Thu, May 24, 2018 at 2:09 PM, Sandro Bonazzola
> wrote:
>
>> The oVirt Project is pleased to announce the availability of the oVirt
>> 4.2.4 First Release Candidate, as of May 24th, 2018
>>
>>
>>
> [snip]
>
>
>> Additional Resources:
>> * Read mor
Hi,
I wanted to try ceph with oVirt and so I've installed an openstack
queens (current stable) environment containing cinder and keystone. But
when I tried to add the storage provider I ended up with 404 errors in
the engine log files.
They are because oVirt tries using the v2.0 API, and
http
example of full list in oVirt 4.2.3.5 with only one host
https://drive.google.com/file/d/12fj3uorno9UjBL_aNQOG0mUSqEFn-Ol4/view?usp=sharing
example of truncated list in oVirt 4.2.3.7 with 3 hosts
https://drive.google.com/file/d/1Es3YSAhcB_L-feaHdkAvwZz8BTB3sYiS/view?usp=sharing
if I select with t
Dear oVirt team,
When trying to start imported VM, it fails with following message:
ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-0673
is down with error. Exit message: Cannot access backin
hi,
see my restore.log in attachment
regards,
--
Emmanuel Thétas
Equipe informatique
support_informatique AT obs-nancay.fr
Station de Radio-astronomie de Nançay
(USN/Observatoire de Paris/CNRS)
18330 Nançay
mail: emmanuel.thetas AT obs-nancay.fr
tel: 02 48 51 87 20
fax: 02 48 51 83
Hi,
according to the logs it seems that something was already in the engine DB.
Could you please try running engine-cleanup before trying the restore?
On Thu, May 24, 2018 at 3:24 PM, thetas emmanuel <
emmanuel.the...@obs-nancay.fr> wrote:
> hi,
>
>
> see my restore.log in attachment
>
>
> regard
I do the restore procedure 3 times
and do for 1
engine-cleanup
systemctl stop rh-postgresql95-postgresql
rm -rf /var/opt/rh/rh-postgresql95/lib/pgsql/data
and restore
like i see here
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/OS7PIU2YUEIA3T3RCCQQETS5W64H7YJL/
but same
On Thu, May 24, 2018 at 5:05 PM Vrgotic, Marko
wrote:
> Dear oVirt team,
>
>
>
> When trying to start imported VM, it fails with following message:
>
>
>
> ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), V
Hi,
New user of ovirt here, i'm trying ovirt 4.2.3.5-1 on centos 7.5.
On the web administration interface i'm missing a lot of features compared to
the guides I can find online or even compared to the official docs.
For example I can't find how to restore a snapshot, I don't have the snapshot
On Thu, May 24, 2018 at 4:54 PM Bernhard Dick wrote:
> Hi,
>
> I wanted to try ceph with oVirt and so I've installed an openstack
> queens (current stable) environment containing cinder and keystone. But
> when I tried to add the storage provider I ended up with 404 errors in
> the engine log fil
On Thu, May 24, 2018 at 2:20 PM wodel youchi wrote:
> Hi,
>
> Excuse the English :)
>
> Need some advice regarding the use of high availability software on VMs on
> oVirt.
>
> We are migrating a physical high available application to oVirt.
> The HA platform uses pacemaker, it contains two nodes
On Thu, May 24, 2018 at 4:07 PM, Guilhem Berna wrote:
> Hi,
>
> New user of ovirt here, i'm trying ovirt 4.2.3.5-1 on centos 7.5.
> On the web administration interface i'm missing a lot of features compared
> to the guides I can find online or even compared to the official docs.
>
> For example I
Dear Nir,
Thank you for quick reply.
Ok, why it will not work?
I used qemu+tcp connection, via import method through engine admin UI.
Images was imported and converted according logs, still “backing file” invalid
entry remained.
Also, I did use same method before, connecting to plain “libvirt
Hello,
after upgrading engine (external) and the 3 hosts composing the cluster, I
try to set its level to 4.2 but I receive this kind of message
"
Error while executing action: Update of cluster compatibility version
failed because there are VMs/Templates [ov42, ovlive3, ovlive4, ovlive1,
ovlive2]
On Thu, May 24, 2018 at 6:06 PM Vrgotic, Marko
wrote:
> Dear Nir,
>
> Thank you for quick reply.
>
> Ok, why it will not work?
>
Because the image has a backing file which is not accessible to oVirt.
> I used qemu+tcp connection, via import method through engine admin UI.
>
> Images was import
Am 24.05.2018 um 16:15 schrieb Nir Soffer:
[...]
Basically Ceph support via Cinder is not fully supported. Even if you get
the API to work, we don't support lot of operations like moving disks
between
Ceph and other storage types. This should be improved in 4.3, but we don't
have concrete pla
Dear Nir,
I believe i understand now. The image imported is not base image, but required
backing file to be able to work properly.
Maybe silly move, but i have tried to “solve/workaround” around the problem by
rebasing image to remove backing file dependency, but it’s clear now why I than
saw
> On 24 May 2018, at 17:13, Gianluca Cecchi wrote:
>
> Hello,
> after upgrading engine (external) and the 3 hosts composing the cluster, I
> try to set its level to 4.2 but I receive this kind of message
>
> "
> Error while executing action: Update of cluster compatibility version failed
> b
On Wed, May 23, 2018 at 1:04 AM femi adegoke
wrote:
> Use Notepad++ to view or is there a better tool?
>
I think "less" is a more appropriate tool for logs.
Didi just published an interesting article about it:
https://opensource.com/article/18/5/advanced-use-less-text-file-viewer
There is also
On Thu, May 24, 2018 at 5:13 PM, Gianluca Cecchi
wrote:
> Hello,
> after upgrading engine (external) and the 3 hosts composing the cluster, I
> try to set its level to 4.2 but I receive this kind of message
>
> "
> Error while executing action: Update of cluster compatibility version
> failed bec
On Thu, May 24, 2018 at 4:28 PM, Nir Soffer wrote:
> On Thu, May 24, 2018 at 2:20 PM wodel youchi
> wrote:
>
>>
>>
[snip]
>
>> We are migrating a physical high available application to oVirt.
>> The HA platform uses pacemaker, it contains two nodes and a shared
>> storage, fence (stonith) is c
On Thu, May 24, 2018 at 5:44 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
[snip]
> > Can't I have macspoof in 4.2?
>
> not sure, but isn’t it only that a custom property is not defined for 4.2
> cluster level. For those you need to do that in every version, basically
>
Correct! th
On Thu, May 24, 2018 at 6:21 PM Bernhard Dick wrote:
> Am 24.05.2018 um 16:15 schrieb Nir Soffer:
>
...
> > You can also try other ways to integrate Ceph, like cephfs or Ceph iSCSI
> > gateway.
> > These options are fully supported as they use the existing file and
> > block based
> > capabiliti
I am hosting ovirt node as VM under VMware. when try to run engine setup, it
getting fails and error
[ INFO ] TASK [Create cloud init user-data and meta-data files]
[ INFO ] TASK [Create ISO disk]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Create local VM]
[ INFO ] changed: [localhost]
[ INFO
Ovirt Users,
I am running into a strange problem with uploading images through the webUI.
When I test the connection on an upload I get “Connection to
ovirt-imageio-proxy service has failed. Make sure the service is installed,
configured, and ovirt-engine certificate is registered as a valid CA
On Thu, May 24, 2018 at 10:57 PM Peter Harman
wrote:
> Ovirt Users,
>
What version are you running?
>
>
> I am running into a strange problem with uploading images through the
> webUI. When I test the connection on an upload I get “*Connection to
> ovirt-imageio-proxy service has failed. Make
2018-05-24 14:09 GMT+02:00 Sandro Bonazzola :
> The oVirt Project is pleased to announce the availability of the oVirt
> 4.2.4 First Release Candidate, as of May 24th, 2018
>
> This update is a release candidate of the fourth in a series of
> stabilization updates to the 4.2
> series.
> This is pr
Ovirt is Hosted Engine and version 4.2 installed a week ago.
OS is Centos7.4 on hosted engine and hosts
Peter Harman – Systems and Safety Cordinator | Homeyer Precision Manufacturing
[Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer Logo
(2).zip\Homeyer Logo\Homeyer Logo.jpg]
16
This is oVirt 4.2.3 + Gluster.
I ran yum -y update on the hosted engine.
It installed 1 package & upgraded 16.
Is it necessary to run "engine-setup" again after the yum update?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to us
Hi,
This is a bug, and possibly a regression. Thank you for reporting. Can you
please open a Bug at
https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine
component = Frontend.Webadmin, Team = UX
[ Related: https://bugzilla.redhat.com/show_bug.cgi?id=1516842 ]
Best wishes,
Greg
On Thu,
On Thu, May 24, 2018, 8:07 PM wrote:
> I am hosting ovirt node as VM under VMware. when try to run engine setup,
> it getting fails and error
>
Are you trying to install hosted-engine in a VM under VMware? Why would you
do that? Have you enabled nested virt and enough resources?
Y.
> [ INFO ]
On Fri, May 25, 2018 at 12:45 AM, femi adegoke
wrote:
> This is oVirt 4.2.3 + Gluster.
>
> I ran yum -y update on the hosted engine.
> It installed 1 package & upgraded 16.
>
> Is it necessary to run "engine-setup" again after the yum update?
>
Yes, it is.
But please set HE global maintenance mo
51 matches
Mail list logo