[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

On Tue, May 21, 2019 at 12:16 PM Sahina Bose wrote: > > > On Mon, May 20, 2019 at 9:55 PM Adrian Quintero > wrote: > >> Sahina, >> Yesterday I started with a fresh install, I completely wiped clean all >> the disks, recreated the arrays from within my controller of our DL380 Gen >> 9's. >> >> OS

[ovirt-users] Re: VM pools broken in 4.3

Hi Rik, I tried also USB enabled pool and other combinations. And unfortunately I did not reproduce the problem. Maybe Michal can say where to look further. On 5/21/19 9:29 AM, Rik Theys wrote: Hi, I've now created a new pool without USB support. After creating the pool, I've restarted ov

[ovirt-users] Re: RHEL 8 Template Seal failed

I'll copy Michal's answer from another thread: "Indeed it won’t work for el8 guests. Unfortunately an el7 libguestfs(so any virt- tool) can’t work with el8 filesystems. And ovirt still uses el7 hosts That’s going to be a limitation until 4.4 Thanks, michal" If you wish to seal el8 guest, you migh

[ovirt-users] Re: VM Windows on 4.2

I can't boot UEFI Windows VM even on oVirt 4.3. "No boot device found" ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: h

[ovirt-users] Re: Wrong disk size in UI after expanding iscsi direct LUN

Hi, Am 17.05.2019 um 19:25 schrieb Scott Dickerson: On Thu, May 16, 2019 at 11:11 AM Bernhard Dick > wrote: Hi, I've extended the size of one of my direct iSCSI LUNs. The VM is seeing the new size but in the webinterface there is still the old size

[ovirt-users] Re: Wrong disk size in UI after expanding iscsi direct LUN

Hi Nir, Am 18.05.2019 um 20:48 schrieb Nir Soffer: On Thu, May 16, 2019 at 6:10 PM Bernhard Dick > wrote: Hi, I've extended the size of one of my direct iSCSI LUNs. The VM is seeing the new size but in the webinterface there is still the old size repor

[ovirt-users] hosts becomes NonResponsive

Hi, time to time one of our four ovirt hosts become NonResponsive. From engine point of view it looks this way (engine.log) 2019-05-21 13:10:30,261+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-95) [] EVENT_ID: VDS

[ovirt-users] Migrating self-HostedEngine from NFS to iSCSI

Hello, I have a few questions regarding migration of HostedEngine. Currently I have a cluster of 3 oVirt 4.3.3 nodes, all three of them are capable of running HE and I can freely migrate HostedEngine and regular VMs between them. However I deployed HostedEngine storage on rather edgy NFS server an

[ovirt-users] Re: VM Windows on 4.2

I always get "No new device drivers found" when I try to select any amd64 folder in the virtio-win ISO (stable version) from the Windows10 x64 (no matter if home/pro/enterprise). ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to

[ovirt-users] Re: [ovirt-announce] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available

Dear Krutika, Yes I did but I use 6 ports (1 gbit/s each) and this is the reason that reads get slower. Do you know a way to force gluster to open more connections (client to server & server to server)? Thanks for the detailed explanation. Best Regards, Strahil NikolovOn May 21, 2019 08:36, Kr

[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

Thanks for the clarification. It seems that my nvme (used by vdo) is not locked. I will check again before opening a bug. Best Regards, Strahil NikolovOn May 21, 2019 09:52, Sahina Bose wrote: > > > > On Tue, May 21, 2019 at 2:36 AM Strahil Nikolov wrote: >> >> Hey Sahina, >> >> it seems that al

[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

Sac, *To answer some of your questions:* *fdisk -l:* [root@host1 ~]# fdisk -l /dev/sdb Disk /dev/sde: 480.1 GB, 480070426624 bytes, 937637552 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 262144 bytes / 262144 bytes

[ovirt-users] Re: Migrating self-HostedEngine from NFS to iSCSI

On Tue, May 21, 2019 at 3:21 PM Miha Verlic wrote: > Hello, > > I have a few questions regarding migration of HostedEngine. Currently I > have a cluster of 3 oVirt 4.3.3 nodes, all three of them are capable of > running HE and I can freely migrate HostedEngine and regular VMs between > them. Howe

[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

> EUREKA: After doing the above I was able to get past the filter issues, > however I am still concerned if during a reboot the disks might come up > differently. For example /dev/sdb might come up as /dev/sdx... Even if they change , you don't have to worry about as each PV contains LVM metada

[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

Awesome, thanks! , and yes I agree, this is a great project! I will now continue to scale the cluster from 3 to 6 nodes including the storage...I will let y'all know how it goes and post the steps as I have only seen examples of 3 hosts but not steps to go from 3 to 6. regards, AQ On Tue, May

[ovirt-users] Re: oVirt node loses gluster volume UUID after reboot, goes to emergency mode every time I reboot.

I'm sorry, i'm still working on my linux knowledge, here is the output of my blkid on one of the servers: /dev/nvme0n1: PTTYPE="dos" /dev/nvme1n1: PTTYPE="dos" /dev/mapper/eui.6479a71892882020: PTTYPE="dos" /dev/mapper/eui.0025385881b40f60: PTTYPE="dos" /dev/mapper/eui.6479a71892882020p1: UUID="

[ovirt-users] Re: oVirt node loses gluster volume UUID after reboot, goes to emergency mode every time I reboot.

Do you use VDO ?If yes, consider setting up systemd ".mount" units, as this is the only way to setup dependencies. Best Regards,Strahil Nikolov В вторник, 21 май 2019 г., 22:44:06 ч. Гринуич+3, mich...@wanderingmad.com написа: I'm sorry, i'm still working on my linux knowledge, here i

[ovirt-users] Gluster rebuild: request suggestions (poor IO performance)

Hi: I've been having one heck of a time for nearly the entire time I've been running ovirt with disk IO performance. I've tried a variety of things, I've posted to this list for help several times, and it sounds like in most cases the problems are due to design decisions and such. My cluster has

[ovirt-users] Re: Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

On Tue, May 21, 2019 at 9:00 PM Adrian Quintero wrote: > Sac, > > 6.-started the hyperconverged setup wizard and added* > "gluster_features_force_varlogsizecheck: false"* to the "vars:" section > on the Generated Ansible inventory : > */etc/ansible/hc_wizard_inventory.yml* file as it was complai

[ovirt-users] Re: Supporting comments on ovirt-site Blog section

The postings on your site are always excellent https://enablecookieswindows10.com/ Thanks for the great share and keep up this great work ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: [ovirt-announce] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available

On Tue, May 21, 2019 at 8:13 PM Strahil wrote: > Dear Krutika, > > Yes I did but I use 6 ports (1 gbit/s each) and this is the reason that > reads get slower. > Do you know a way to force gluster to open more connections (client to > server & server to server)? > The idea was explored sometime b

[ovirt-users] Re: oVirt node loses gluster volume UUID after reboot, goes to emergency mode every time I reboot.

+Sachidananda URS On Wed, May 22, 2019 at 1:14 AM wrote: > I'm sorry, i'm still working on my linux knowledge, here is the output of > my blkid on one of the servers: > > /dev/nvme0n1: PTTYPE="dos" > /dev/nvme1n1: PTTYPE="dos" > /dev/mapper/eui.6479a71892882020: PTTYPE="dos" > /dev/mapper/eui.0

[ovirt-users] Re: oVirt node loses gluster volume UUID after reboot, goes to emergency mode every time I reboot.

On Wed, May 22, 2019 at 11:26 AM Sahina Bose wrote: > +Sachidananda URS > > On Wed, May 22, 2019 at 1:14 AM wrote: > >> I'm sorry, i'm still working on my linux knowledge, here is the output of >> my blkid on one of the servers: >> >> /dev/nvme0n1: PTTYPE="dos" >> /dev/nvme1n1: PTTYPE="dos" >>