[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

On Wed, Nov 11, 2020 at 11:49 AM Matteo Bonardi wrote: > > Hi Didi, > > > On Tue, Nov 10, 2020 at 7:18 PM Strahil Nikolov via Users > > > > > I already suggested to open a bug for this earlier in this thread. > > I will open a bug for that. Thanks. > > > I am not sure. I talked with Sandro

[ovirt-users] Upgrade Problem oVirt engine 4.4.1.8-1.el8 -> 4.4.3

Hi ! I’m trying to upgrade oVirt engine 4.4.1.8-1.el8 to the latest 4.4.3, running as KVM appliance (not hosted engine). This sequence of commands yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm engine-upgrade-check yum update ovirt\*setup\* Results in a long list of

[ovirt-users] Re: Upgrade Problem oVirt engine 4.4.1.8-1.el8 -> 4.4.3

Hi I would like to add to this thread that I had experienced a very similar problem yesterday on my test system. Notice that I have a different installation (engine installed on same host as oVirt host). I worked around the issue with the following steps: * make engine-backup of the

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

On Tue, Nov 10, 2020 at 7:18 PM Strahil Nikolov via Users wrote: > > the delegate_to stanza should use the variable for the HostedEngine, but I > think this one from the code should work: > > delegate_to: "{{ groups.engine[0] }}" > > @Sandro Bonazzola , > Maybe we should open a feature request

[ovirt-users] Re: Host NonResponsive after migration to oVirt 4.4

On Wed, Nov 11, 2020 at 12:38 PM tfe...@swissonline.ch wrote: > > Hello Yedidyah > > Many thanks for clarification. > > If I wanted to convert my all-in-one installation to a "supported" one (on a > single box), would I have to migrate my engine into a self-hosted VM? What > would be the most

[ovirt-users] Ballooning disabled when creating a VmPool

Hi, We're using oVirt 4.3.8 along with ovirt-engine-sdk-python (4.4.1) to handle our pools. Pools are based on a template which has ballooning enabled. However, when deploying a VmPool based on that template, has the "Ballooning enabled" field disabled, uneditable and an icon which states:

[ovirt-users] Re: Cannot restore engine from 4.3.9 to 4.4.3

On Wed, Nov 11, 2020 at 4:34 AM tfe...@swissonline.ch wrote: > > Hi > > I just tried to restore my engine backup taken from release 4.3.9.4 to a > newer oVirt installation release 4.4.3.11. > > The restore process fails with a FATAL error. > > I was under the impression that backups from all 4.3

[ovirt-users] Engine update error from 4.4.2 to 4.4.3

Hello, is this still the correct command during updates through minor releases in 4.4.x? yum update ovirt\*setup\* Because my standalone external engine is now at level ovirt-engine-4.4.2.6-1.el8.noarch with [root@ovmgr1 ~]# yum repolist repo id repo name AppStream CentOS-8 - AppStream BaseOS

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

Thanks to all yours suggestions I, finally, complete the deploy with success. The solution is been to edit the file /usr/share/ansible/roles/ovirt.engine-setup/tasks/install_packages.yml adding the proxy variable: - name: Install oVirt Engine package package: name: "ovirt-engine"

[ovirt-users] Re: Host NonResponsive after migration to oVirt 4.4

Hello Yedidyah Many thanks for clarification. If I wanted to convert my all-in-one installation to a "supported" one (on a single box), would I have to migrate my engine into a self-hosted VM? What would be the most common way to conform? I was able to fix my problem by: * uninstalling

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

Hi Didi, > On Tue, Nov 10, 2020 at 7:18 PM Strahil Nikolov via Users > > I already suggested to open a bug for this earlier in this thread. I will open a bug for that. > I am not sure. I talked with Sandro about this, and we agreed that a > common enterprise requirement is being able to use a

[ovirt-users] Re: Clone a VM in the User Portal

Hi Arik, El 10/11/20 a las 15:22, Arik Hadas escribió: On Tue, Nov 10, 2020 at 4:37 PM Nicolás > wrote: Hi Arik, El 10/11/20 a las 13:21, Arik Hadas escribió: On Tue, Nov 10, 2020 at 3:08 PM Nicolás mailto:nico...@devels.es>> wrote: Hi

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

On Wed, Nov 11, 2020 at 12:14 PM Gianluca Cecchi wrote: > > On Wed, Nov 11, 2020 at 11:05 AM Yedidyah Bar David wrote: > > [snip] > >> > One suggestion for who will have the same problem: >> > This file was created by the first failed run of the deploy. >> > Without run the deploy, this file

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

On Wed, Nov 11, 2020 at 11:05 AM Yedidyah Bar David wrote: [snip] > One suggestion for who will have the same problem: > > This file was created by the first failed run of the deploy. > > Without run the deploy, this file does not exists. > > So you have to run the deploy one time, let it fail

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

Hi Gianluca, could you please file a bug for that? No idea how we could miss such a blocker :-( Thanks, Martin On Wed, Nov 11, 2020 at 2:46 PM Gianluca Cecchi wrote: > On Wed, Nov 11, 2020 at 2:02 PM Gilboa Davara wrote: > [snip] > > >> $ yum update ovirt\*setup\* >> Last metadata

[ovirt-users] Re: Single Node HCI upgrade procedure from CentOS7/oVirt 4.3 to CentOS8/oVirt 4.4?

There are plenty of other reasons to be running a single-host Hyperconverged deployment, in production. One of them is financial. Another is for small-scale production systems that don't have the space, finances, or other resources to run a 3-node system. Considering it a "toy" doesn't mean it

[ovirt-users] Upgrade OVIRT from 3.6 to 4.3

Hi Guys! I need to upgrade from 3.6 to 4.3 and I have a doubt. Do I need to restard VMs for each upgrade (DC Compatibilty 1° 4.0 - 2° 4.1 - 3° 4.2 and 4° 4.3) or can modify the compatibilty from 3.6 to 4.2 and restart the vms in this only step. Best regards

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

Hello I have updated only the engine first using bellow command and could proceed with the update. dnf update ovirt-engine-setup ovirt-engine-setup-plugin-websocket-proxy ovirt-engine-dwh-setup ovirt-engine-dwh-grafana-integration-setup engine-setup " yum update ovirt\*setup\* " -- did

[ovirt-users] Re: Upgrade Problem oVirt engine 4.4.1.8-1.el8 -> 4.4.3

Yes I know I can reinstall and import back database, but its kinda awkward. > On 11 Nov 2020, at 14:21, tfe...@swissonline.ch wrote: > > Hi > > I would like to add to this thread that I had experienced a very similar > problem yesterday on my test system. > > Notice that I have a different

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

On Wed, Nov 11, 2020 at 3:45 PM Gianluca Cecchi wrote: > > On Wed, Nov 11, 2020 at 2:02 PM Gilboa Davara wrote: > [snip] > >> >> $ yum update ovirt\*setup\* >> Last metadata expiration check: 1:50:00 ago on Wed 11 Nov 2020 01:03:00 PM >> IST. >> > > ?? > Does it mean you too or what? > Please,

[ovirt-users] Re: Upgrade Problem oVirt engine 4.4.1.8-1.el8 -> 4.4.3

The way i resolved this, was to update only specific packages first. So i am not using this step " yum update ovirt\*setup\* " and use the bellow command which updates the engine-setup. dnf update ovirt-engine-setup ovirt-engine-setup-plugin-websocket-proxy ovirt-engine-dwh-setup

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

On Wed, Nov 11, 2020 at 4:12 PM shadow emy wrote: > Hello > > I have updated only the engine first using bellow command and could > proceed with the update. > > dnf update ovirt-engine-setup ovirt-engine-setup-plugin-websocket-proxy > ovirt-engine-dwh-setup

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

On Wed, Nov 11, 2020 at 2:02 PM Gilboa Davara wrote: [snip] > $ yum update ovirt\*setup\* > Last metadata expiration check: 1:50:00 ago on Wed 11 Nov 2020 01:03:00 PM > IST. > > ?? Does it mean you too or what? Please, words are (still) free so you can use some more... ;-) Gianluca

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

No problem, Martin. Actually after so many RCs I remained sort of stumbled too... but possibly a last minute change on some repos without deeply considering impacts... Tell me which component: ovirt-engine? And if so what component type? I'm already inside the bugzilla form page ;-) Gianluca

[ovirt-users] Re: Cluster with Hosted Engine update BIOS Setting Ovirt 4.4.3

I had the same problem after Update. What i did was set Chipset/Firmware Type to: " I440FX Chipset with BIOS " and it works. Previous setting was "Q35 Chipset with BIOS " , which did not work with 4.4.3 . I also can not change the Cluster Compatibility to 4.5 and if i want to do Spike VNC

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

On Wed, Nov 11, 2020 at 10:57 AM Gianluca Cecchi wrote: > > Hello, > is this still the correct command during updates through minor releases in > 4.4.x? > > yum update ovirt\*setup\* > > Because my standalone external engine is now at level > ovirt-engine-4.4.2.6-1.el8.noarch > > with >

[ovirt-users] Cluster with Hosted Engine update BIOS Setting Ovirt 4.4.3

I changed the type in the cluster and now my hosted-engine machine won't start!. There are no backups. How can I manually change the parameters of the machine from under the roof so that it starts and I can restore ovirt to work Error in logs: XML error: The device at PCI address :00:02.0

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

On Wed, Nov 11, 2020 at 3:35 PM Gianluca Cecchi wrote: > No problem, Martin. > Actually after so many RCs I remained sort of stumbled too... but possibly > a last minute change on some repos without deeply considering impacts... > Tell me which component: ovirt-engine? And if so what component

[ovirt-users] Cluster compatibility version 4.5 on oVirt 4.4

Hi Today, I upgraded oVirt from 4.3 to 4.4.3. After the upgrade, I upgraded the compatibility from 4.3 to 4.4. I noticed that the cluster config is offering me another upgrade of the compatibility to version 4.5. Up until now, I was under the impression that the compatibility version must

[ovirt-users] Dependencies failure when upgrading from version 4.4.2 to 4.4.3

When I update the Engine and Host, many dependencies are missing, as shown by the host error log: Error: Problem 1: package ovirt-hosted-engine-setup-2.4.6-1.el8.noarch requires ovirt-ansible-engine-setup >= 1.1.9, but none of the providers can be installed - package

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

On Wed, Nov 11, 2020 at 8:13 PM Martin Perina wrote: > Hi, > Could you please try to upgrade from 4.4.2 to 4.4.3 using below steps: > > # dnf update ovirt\*setup\* --nobest > # engine-setup > # dnf update --nobest > # reboot > > Thanks, > Martin > > Hi, it was successful and I updated

[ovirt-users] Re: Dependencies failure when upgrading from version 4.4.2 to 4.4.3

Hi, We already have https://bugzilla.redhat.com/show_bug.cgi?id=1896799 open to track this issue. Could you please to upgrade your standalone engine using below steps? # dnf update ovirt\*setup\* --nobest # engine-setup # dnf update --nobest # reboot If engine upgrade is successful,

[ovirt-users] Re: Dependencies failure when upgrading from version 4.4.2 to 4.4.3

Hi Martin. Sorry my english... So... the engine was updated successfully. I had already executed the commands and procedures you wrote below, but even so, the host fails to update. Below are some messages from the events of the engine's web interface: - Failed to upgrade Host

[ovirt-users] Adding iscsi issue 4.3

When connecting an iscsi connection from an array I get the following popup "A database error occurred. Please contact your system administrator." I have checked everything and the only device connected right now is the single host in the datacenter. If I check the box " Approve operation" and

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

Hi, Could you please try to upgrade from 4.4.2 to 4.4.3 using below steps: # dnf update ovirt\*setup\* --nobest # engine-setup # dnf update --nobest # reboot Thanks, Martin On Wed, Nov 11, 2020 at 4:32 PM Gianluca Cecchi wrote: > On Wed, Nov 11, 2020 at 4:12 PM shadow emy wrote: > >>

[ovirt-users] Re: Adding iscsi issue 4.3

Disregard, the array was setting the LBA support to 32 bit which was causing the block size to go way up. Also it was doing an auto partition of the volume which was causing the LV create to error out. Once I ran dd on the volume it all works correctly now.

[ovirt-users] Re: Cluster compatibility version 4.5 on oVirt 4.4

Just to confirm i face similar problem. Yes i saw that warning too : "Upgrade Cluster Compatibility Level" to upgrade the Cluster to version 4.5. Though when i try to do that there are a lot of errors. In GUI : Error while executing action: Cannot change Cluster Compatibility Version to

[ovirt-users] Unable to live migrate a VM from 4.4.2 to 4.4.3 CentOS Linux host

Hello, I was able to update an external CentOS Linux 8.2 standalone engine from 4.4.2 to 4.4.3 (see dedicated thread). Then I was able to put into maintenance one 4.4.2 host (CentOS Linux 8.2 based, not ovirt node ng) and run: [root@ov301 ~]# dnf update Last metadata expiration check: 0:27:11 ago

[ovirt-users] Re: Dependencies failure when upgrading from version 4.4.2 to 4.4.3

On Wed, Nov 11, 2020 at 9:07 PM wrote: > Hi Martin. > > Sorry my english... > > So... the engine was updated successfully. I had already executed the > commands and procedures you wrote below, but even so, the host fails to > update. > > Just as a complimentary follow up, I was able to update a

[ovirt-users] Re: Engine update error from 4.4.2 to 4.4.3

Yes after that i run engine-setup, then i was able to run " yum update" on the hosted-engine vm without errors. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: Upgrade OVIRT from 3.6 to 4.3

On Wed, Nov 11, 2020, 17:03 Miguel Angel Costas wrote: > Hi Guys! > > I need to upgrade from 3.6 to 4.3 and I have a doubt. > Do I need to restard VMs for each upgrade (DC Compatibilty 1° 4.0 - 2° > 4.1 - 3° 4.2 and 4° 4.3) or can modify the compatibilty from 3.6 to 4.2 > and restart the vms

[ovirt-users] BUG: after upgrading 4.4.2 to 4.4.3 ISO Domain show empty list

I have upgraded 4.4.2 to 4.4.3 afterthat ISO Domain is not showing any ISO files .its show empty list i think this is bug in 4.4.3 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: Cluster compatibility version 4.5 on oVirt 4.4

Hello, To upgrade to cluster 4.5 you need a 8.3 host. I guess still CentOS 8.3 is not available. I am not sure on CentOS 8.3 availability. If it's available please make sure your host is upgraded to 8.3 . On Thu, Nov 12, 2020, 5:38 AM shadow emy wrote: > > Just to confirm i face similar

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

Il giorno mer 11 nov 2020 alle ore 11:01 Yedidyah Bar David ha scritto: > On Wed, Nov 11, 2020 at 11:49 AM Matteo Bonardi wrote: > > > > Hi Didi, > > > > > On Tue, Nov 10, 2020 at 7:18 PM Strahil Nikolov via Users > > > > > > > > I already suggested to open a bug for this earlier in this