Hi
I am new to oVirt so apologies for ignorance.
I have installed oVirt Node 4.5.5 and how to login to Web-Interface
(https://:9090) what is the default user and password.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to
I'm attempting to update our oVirt cluster to 4.5.5 from 4.5.4, running oVirt
Node NG on the hosts.
When I tried updating a host through the oVirt Manager GUI, after the host
reboots, it fails to start up and goes into emergency recovery mode:
[4.534872] localhost systemd[1]: Reached target
Hello,
I have ovirt with two nodes and one that are NonResponsive and and cant manage
them
because they are in Unknown state.
It seems that nodes lost connection for a while with their gateway.
The node (ovirt2) however is having consistent problems. The follow sequence of
events is
Hello,
I have ovirt with two nodes and one that are NonResponsive and and cant manage
them because they are in Unknown state.
It seems that nodes lost connection for a while with their gateway.
The node (ovirt2) however is having consistent problems. The follow sequence of
events is
Hello there,
May I ask why I have installed ovirt node 4.5 latest from iso on my esxi8 after
I logged in to the web interface to manage this host I cannot find menu
virtualization but when I tested on 4.4.6 everything is work. Do you have any
idea?
Thanks.
Hello Guys
I installed oVirt Node 4.4 and I want to deploy Hosted Engine but i get this
error
[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address
resolves only on the selected interface]
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "hostname
Hi all,
On a single Server the node disk is broken and I have to replace it.
The glusterfs configuration is also gone but the glusterfs directorys are
existing on a separate available disk.
Did I have a Chance to install the ovirt Node on a New disk and make the old
glusterfs running and
Hello all.
Again, here, asking for help. I just installed a oVirt node 4.5.4 in a new
server but I can't use our 10gb interface becouse even though the module been
loaded we can´t see the interface. I tryed install 4.4 oVirt node in the same
server and I can see and use the same interface. I
Hi all,
I reinstalled one of the ovirt-nodes, with ovirt-4.5.4, and after the
reinstallation the agents of the vms connected to this node cannot
communicate with the ovirt-engine.
ovirt-engine 4.5.4
any idea?
VMs work perfectly, but the agent doesn't communicate.
Best regards,
Fernando
ovirt-node-ng-installer-4.4.10-2022030308.el8
ovirt-node-ng-installer-4.4.10-2022030308
can't recognize network intefaces:
06:00.0 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC
(be3) [19a2:0710] (rev 01)
06:00.1 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb
Hello,
I'm planning to upgrade ovirt engine to 4.5, but I need now to install
additionnal hosts. Is it safe to directly install my new hosts with
ovirt-node 4.5 and attach them to 4.4 engine?
Thank you
--
Nathanaël Blanchet
Supervision réseau
SIRE
227 avenue Professeur-Jean-Louis-Viala
oVirt Node 4.5.3.1 Async update
On October 20th 2022 the oVirt project released an async update of oVirt
Node (4.5.3.1) delivering a fix for OVS/OVN package conflict issue.
The update is already available on resources.ovirt.org and should land on
oVirt mirrors within 24 hours.
--
Sandro
Hi there, I saw that there has new package of
ovirt-node-ng-image-update-placeholder-4.4.10.3-1.el8.noarch.rpm has released
on 2022-06-24. However, I would like to know if there has any plan to release
new package of ovirt-node-ng-image-update-4.4.10.3-1.el8.noarch.rpm as the the
package is
Hello we have some nodes that don't boot cleanly, CTRL-D or logging into the
node allows the system to finish the startup properly.
selinux-autorelabel-mark.service: Job selinux-autorelabel-mark.service/start
failed with result 'dependency'
systemd[1]: Timed out waiting for device
Hi,
I have to scan our 18 nodes with a virus scanner and I have to provide the
report to our ito.
This nodes have no internet connection and they will not get it.
Which software I should use? Clamav?
I can shutdown each single node and can scan but I would prefer to have it as
cmd running
Hi guys! I've tried to deploy ovirt single node with gluster via GUI but have a
problem immediately. A log file that shows after installation was empty. But in
journalctl I found that:
Apr 23 20:06:45 host1 cockpit-ws[22948]: ERROR! couldn't resolve module/action
'vdo'. This often indicates a
Hello,
I am trying to add a new ovirt-node-ng 4.4.10 node to my cluster managed by an
ovirt-engine version 4.4.10.
My cluster is composed of other ovirt-node-ng which have been successively
updated from version 4.4.4 to version 4.4.10 without any problem.
This new node is integrated normally
I am running OVIRT-Node and although I updated my mirror list and the hosts are
fine. It seems my engine deployment (deploying hyperconverged gluster) is
trying to use a different set of mirrors during Engine VM Prep.
SO this is the error I see, should I be running a newer RPM on these nodes or
Hi,
I'm still working on it but I have a first ISO ready for giving a first run
at
https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-ng-installer/4.5.0-2021091610/el9/ovirt-node-ng-installer-4.5.0-2021091610.el9.iso
Known limitations:
- No hosted engine setup available
-
oVirt Node 4.4.8.3 Async update
On September 3rd 2021 the oVirt project released an async update for oVirt
Node consuming the following packages:
-
ovirt-release44 4.4.8.3
-
ovirt-node-ng-image-update 4.4.8.3
oVirt Node respin also consumed most recent CentOS Stream and Advanced
Maybe my problem is in part linked to an issue seen by Jayme earlier, but
then the resolution that worked for him did not succeed for me :
I first upgraded my Self Hosted Engine from 4.4.5 to 4.4.6 and then
upgraded it to Centos-Stream and rebooted
Then I tried to upgrade the cluster (3
Hello!
We want to switch OS based oVirt instalation to oVirt-Node based.
Is it safe to have OS based hosts and oVirt-Node hosts in the same cluster
(with FC shared storage) during transition ?
Thank you.
___
Users mailing list -- users@ovirt.org
To
Hi.
I have a 2 node cluster (both installed from the Ovirt-node iso) , 1 server is
100% fine, but one server I tried to update when there were issues with the
ovirtmgmt network (I wasn't aware of at the time) - as a result the server
update failed, and was still on ovirt-node 4.4.4 after - I
Hi.
I have installed Ovirt nodes via the ovirt-node iso (centos8 based) - on a
fresh install the standard CentOS repos are disabled (the ovirt 4-4 repo is
enabled)
As part of our company hardening we need to install a few packages from the
Centos repos.
Can I enable the
Hi All,
I have a server with a RAID1 disk for sda and RAID 5 disk for sdb.
Following default install, prior to Cockpit Gluster and Engine wizards there is
only a single Volume Group which doesn’t allow me to continue.
If I manually configure the install and deselect sdb it gives other issues
Hi All,
I have a server with a RAID1 disk for sda and RAID 5 disk for sdb.
Following default install, prior to Cockpit Gluster and Engine wizards there is
only a single Volume Group which doesn’t allow me to continue.
If I manually configure the install and deselect sdb it gives other issues
Hello,
when installing ovirt node ng 4.4 on a Dell M620 I remember I had a crash
in anaconda if I try to set up ntp.
Using ovirt-node-ng-installer-4.4.4-2020122111.el8.iso
As soon as I select it and try to type the hostname to use, all stops and
then anaconda aborts.
Just today I had the same with
Hi all,
I project to upgrade from 4.3 to 4.4 hosts in the next few days, and I
wonder if ovirt node based on centos 8.3 will be upgradable to ovirt
node based on centos stream.
If not, I will wait to upgrade directly to ovirt node centos stream
based when available.
--
Nathanaël Blanchet
Hi Everybody,
I have built a new host which has been running fine for the last couple of
days. I noticed today that the host crashed, but it is not giving me a reason
as to why.
It happened at 13:45 today, but I have given time before that on the logs as
well.
Is there something I am missing
Hi All,
I'm trying to install node 4.4.2 on an eMMC card, but when I get to the storage
configuration of the installer, it doesn't save the settings (which is
automatic configuration) I have chosen and displays failed to save storage
configuration. I have deleted all partitions on the card
Hi
Is there a way to deploy vms on the ovirt node without using the oVirt
engine?
Thanks,
Nagaraju
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Hey Folks,
I've got a bit of a strange one here. I downloaded and installed
ovirt-node-ng-installer-4.4.2-2020091810.el8.iso today on an old dev
laptop and to get it to install I needed to add acpi=off to the kernel
boot param to get the installing to work (known issue with my old
laptop). After
oVirt Node 4.4.2 is now generally available
The oVirt project is pleased to announce the general availability of oVirt
Node 4.4.2 , as of September 25th, 2020.
This release completes the oVirt 4.4.2 release published on September 17th
Important notes before you install / upgrade
Please note
I finally got oVirt node installed with gluster on a single node.
So that's great progress!
Once that step was complete...
I noticed that the Engine Deployment wizard asks for SMTP settings for where to
send notifications. I was kind of surprised that it doesn't allow one to enter
any
Hi all
I have an issue while trying to deploy hyperconverged solution on three
ovirt node boxes.
ISO used is ovirt-node-ng-installer-4.4.1-2020072310.el8.iso.
When from cockpit I choose gluster deployment, I have a form where I can
insert both gluster fqdn names and public fqdn names (that is
I've an external RAID subsystem connect to the host by SAS cable (SFF-8644).
I follow the instructions of the RAID card manufacture. Include the driver
during host installation. And I can see the created RAID volumes (LUNs)
available in "Installation Destination". Although I choose to install
All,
I applied the recent update 4.4.1 -> 4.4.1.1 to a host in a cluster and it
failed. After reboot it was hund at the emergency console. I reinstalled 4.4.1
fresh on the host. Prior to adding it back to the cluster I applied the same
update with the same result. Is this just a bad update or
Hi,
Deploying oVirt 4.4.1.1 via Cockpit --> Hosted Engine --> Hyperconverged fails
at Gluster deployment:
TASK [gluster.infra/roles/backend_setup : Create thick logical volume] *
failed: [fmov1n3.sn.dtcorp.com] (item={'vgname': 'gluster_vg_nvme0n1',
'lvname': 'gluster_lv_engine',
Hi,
fresh installation of oVirt-node 4.4.0 on a cluster -- the hosted-engine
--deploy command fails if DNF is unable to download updates.
This cluster is not connected to the public network at the moment.
If I use a proxy (setting the relevant env. variables) it fails at a later
stage (I think
Hi all,
I have in production a 4.3.9 setup of ovirt, based on a standalone
engine, not HE.
I have 3 datacenters (an 3 clusters). One of these clusters is composed
of many tenth of HP blades, accessing storage via InfiniBand (used as
normal NICs, via ipoib). They're not the state of the art, but I
I have built a new host and my setup is a single hyperconverged node.. I
followed the directions to create a new logical network. I see that the engine
has marked the network as being down. (Hosts>Network Interfaces Tab>Setup Host
Networks)
Here is my network config on the host-
[root@vmh
Dear oVirt community,
recently I've started to use oVirt as a replacement for KVM + VirtManager and
I've decided to use the oVirt Node installed on Dell EMC servers with
self-hosted engine. So far, everything works fine, except that, each time I'm
updating the nodes, I must reinstall Dell
Hello,
on the latest version of the oVirt-node install running nodectl
info gives the error
Traceback (most recent call last):
File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib64/python2.7/runpy.py",
Hi,
I am new to oVirt, coming from XenServer platform, so please be patient with me.
After a successful install of latest stable oVirt node
(ovirt-node-ng-installer-4.3.4-2019061016.el7.iso) I am having troubles
deploying hosted engine to an iscsi target over Cockpit. I have a couple of
iscsi
I am unable to connect via SPICE (Windows VirtViewer) to VM's running on
my compute node. It appears the node did not auto-configure the
firewall because the .vv files appear to point to the correct IP address
and common ports. Is there a way to re-run/re-execute the firewall
I have a two-node cluster with one host (ovirt1) running the oVirt engine and
the other running the most recent oVirt Node (4.3.2 from March 2019) software.
The engine host has the following information:
OS Version:
RHEL - 7 - 6.1810.2.el7.centos
OS Description:
CentOS Linux 7 (Core)
Kernel
Hi,
It is possible to transfer my node to other ovirt engine (new 4.3) here's the
scenario.
Old Server: (no internet prod)
Engine (ovirt 4.1) - Hardware failure No possible recovery
Node1 (node 4.1)
Node2 (node 4.1)
New Server
Engine (Ovirt 4.3)
*note have full backup of old engine 4.1
This only started to happen with oVirt node 4.3, 4.2 didn't have issue. Since
I updated to 4.3, every reboot the host goes into emergency mode. First few
times this happened I re-installed O/S from scratch, but after some digging I
found out that the drives it mounts in /etc/fstab cause the
Sorry if this seems simple, but trial and error is how I learn. So the basics.
I installed Node 4.3 on 3 hosts, and was following the setup for self-hosted
engine. The setup fails when detecting peers and indicates that they are
already part of a cluster. So i restart the install and choose the
Hi all!
The following error occurs during installation oVirt Node 4.2.8:
EVENT_ID: VDS_INSTALL_IN_PROGRESS_ERROR(511), An error has occurred during
installation of Host hostname_ovirt_node2: Yum Cannot queue package dmidecode:
Cannot retrieve metalink for repository: ovirt-4.2-epel/x86_64.
Hi at all, during the deployment the system fail...
http://oi63.tinypic.com/et9kd4.jpg
During installation it's corretct select all disks?
All disk must be without any partition table?
My target is on the first disk ovirt node, second vmstore/engine volume and
third for data.
By watching this
Boring 3 vanilla node deployment. Default options except for gluster volume
size. All three nodes on static IP on LAN. All three have each other listed
in /etc/hosts as well as dns.
Gluster wizard complete successfully, deploy VM. VM deployment fails after
copying to the gluster storage. At that
I have no idea what's wrong at this point. Very vanilla install of 3 nodes.
Run the Hyperconverged wizard, completes fine. Run the engine deployment,
takes hours, eventually fails with :
[ INFO ] TASK [oVirt.hosted-engine-setup : Check engine VM health]
[ ERROR ] fatal: [localhost]: FAILED! =>
New install of ovirt-node 4.2 (from iso). Setup each node with networking
and ssh keys, and use the hyperconverged gluster deployment wizard. None of
the user specified settings are ever reflected in the gdeployConfig.conf.
Anyone running into this?
--
_
Fact:
1. Ninjas are mammals.
2.
Let's start a new thread more focused on the subject
I'm just testing deployment of HCI single host using oVirt Node NG CentOS 7
iso
I was able to complete the gluster setup via cockpit with these
modifications:
1) I wanted to check via ssh and found that files *key under /etc/ssh/ had
too weak
Hi,
Trying to update oVirt Node 4.2.7.1 to 4.3.0, but it fails with the
following dependencies:
"Loaded plugins: enabled_repos_upload, fastestmirror,
imgbased-persist,\n : package_upload, product-id,
search-disabled-repos, subscription-\n : manager,
Hello everybody,
Since days, I'm trying to install oVirt (via Foreman) in network mode (TFTP net
install).
All is great, but I want to make some actions in postinstall (%post).
Some actions are relatated to /etc/sysconfig/network-interfaces and another
action is related to root authorized_keys.
Hello,
vm stuck (on two hosts)
I have MySQL VM guest that was stuck in a way that "kill -9" to the MySQL
server pid did nothing.
from the shell I execute "init 0", this did not shut down the VM.
from the ovirt-engine I'm trying to power off the machine, and it is not
doing anything.
the event
Hi,
I have downloaded the ISO on physical server but I am unable to attach to my
ovirt engine as it showing vdsm error but during update on CentosOS launched
with ISO its giving below :
[root@r yum.repos.d]# sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm
Loaded
Hi, community! What is best way for LDAP auth on oVirt Node? Is it possible to use realmd to integarate with domain?___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
1. I install the ovirt node 4.2 in KVM on centos 7. when i try to install
package or yum update it shows the message" Cannot retrieve metalink for
repository: ovirt-4.2-epel/x86_64. Please verify its path and try again
Uploading Enabled Repositories Report Loaded plugins: fastestmirror,
Hi all !
Broken dependencies ?
[root@nscovirtkvm41prdpoa ~]# yum update
Loaded plugins: enabled_repos_upload, fastestmirror, package_upload,
product-id, search-disabled-repos, subscription-manager, vdsmupgrade
This system is not registered with an entitlement server. You can use
I'm trying to change the FQDN, I tried changing the /etc/hosts and also with
hosted-engine --deploy... please can someone help me about what can I do to
change the fqdn?
And I'm trying to do the Hosted Engine Deployment and I want to put for example
ovirtNode.sec.com...
Any idea about how to
yum update ends with:
warning: %post(ovirt-node-ng-image-update-4.2.5.1-1.el7.noarch) scriptlet
failed, exit status 1
Non-fatal POSTIN scriptlet failure in rpm package
ovirt-node-ng-image-update-4.2.5.1-1.el7.noarch
It creates the layers:
ovirt-node-ng-4.2.5.1-0.20180731.0 onn Vri---tz-k
Hello all,
I've emailed about similar trouble with an oVirt Node upgrade using the
ISO install. I've attached the /tmp/imgbased.log file in hopes it will
help give a clue as to why the trouble.
Since these use NFS storage I can rebuild, but would like to know,
ideally, what caused the
Hello,
I tried to update a ovirt-ng-node from 4.2.4 via the engine and it
failed, I also tried using "yum update ovirt-node-ng-image-update".
What is the correct way to update a node and how do I delete old layers
Thanks,
Paul S.
The output from "nodectl info" is
layers:
HI all
How can I provide to my oVirt hosts a custom multipath.conf, considering
that we are using shared/mirrored FC storage from HPE 3PAR with high
availability of provided LUNs, using peer-persistance feature ?
To configure correctly this require a custom multipath.conf is required.
How I can
Hi, i try install oVirt node, but getting errors on step post-install script.
Screen error in attachment.
[cid:944CCD96-B8FF-4ABA-AF17-FA6A7DC184BB@digital-ecosystems.ru]
[cid:8D77635B-AF62-4894-A9E2-F57E9F290DE5@digital-ecosystems.ru]
___
Users
Hello,
I successfully installed Ovirt Node NG from ISO to an ISCSI target
attached via first network interface by using following extensions to
the grub cmdline:
"rd.iscsi.ibft=1 ip=ibft ip=eno2:dhcp"
I want to use the server as diskless ovirt-node-ng Server.
After successful install the
I am trying to download Node 4.1 from https://www.ovirt.org/node but am
receiving a 404 error. Is there an alternative link to try for the latest
stable release?
Thanks,
Charles
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email
Hi guys,
how do you upgrade ovirt nodes? I can't figure out the best practice
from documentation.
If I try `Check for upgrades` from oVirt Hosted engine interface,
nothing happens.
If I run `yum update` on an ovirt node, I get offered the following:
```
Installing:
Hello,
I successfully installed Ovirt Node NG from ISO to an ISCSI target
attached via first network interface by using following extensions to
the grub cmdline:
"rd.iscsi.ibft=1 ip=ibft ip=eno2:dhcp"
I want to use the server as diskless ovirt-node-ng Server.
After successful install the
Hello,
I'm deploying a test cluster to get used to the ovirt product.
My ovirt ( 4.2.2) engine is deployed in a vmware virtual machine.
I'm busy deploying 5 hosts using the ovirt-node iso.
I have issue with the additional physical network interface ( used for vm
trafic and iSCSI)
In ovirt
Hi,
I am currently building a new virtualization cluster with oVirt, using
AMD EPYC processors (AMD EPYC 7351P). At the moment I'm running oVirt
Node Version 4.2.3 @ CentOS 7.4.1708.
We have the situation that the processor type is recognized as "AMD
Opteron G3". With this type of
On 03/28/2018 01:37 AM, Pavol Brilla wrote:
Hi
AFAIK ext4 is not supporting online shrinking of filesystem,
to shrink storage you would need to unmount filesystem,
thus it is not possible to do with VM online.
Correct. Just saying it's not possible at all with XFS, be that online or
Hi
AFAIK ext4 is not supporting online shrinking of filesystem,
to shrink storage you would need to unmount filesystem,
thus it is not possible to do with VM online.
On Wed, Mar 28, 2018 at 2:30 AM, Matt Simonsen wrote:
> Hello,
>
> We have a development box with local storage,
Hello,
We have a development box with local storage, running ovirt Node 4.1
It appears that using the admin interface on port 9090 I can resize a
live partition to a smaller size.
Our storage is a seperate LVM partition, ext4 formated.
My question is, both theoretically and practically, if
Hello,
I'm experimenting to install ovirt ng node 4.2 via pxe and it seems all
went ok.
Only problem I have is that opening terminal session I get this traceback
that seems related to thinpool
Traceback (most recent call last):
File "/usr/lib64/python2.7/runpy.py", line 162, in
On Mon, Mar 5, 2018 at 10:56 PM, Nicolas Vaye
wrote:
> Hello,
>
>
> I'd installed oVirt Node 4.2.1 on two host, i'd deployed HE on the first,
> via a storage NFS.
> The administration portal seem to be OK but i can't see the HE VM, the
> portal indicate there is one
Hello,
I'd installed oVirt Node 4.2.1 on two host, i'd deployed HE on the first, via a
storage NFS.
The administration portal seem to be OK but i can't see the HE VM, the portal
indicate there is one VM, but impossible to get it into the list of the VM.
I can't see the storage that host the
Hi Yuval,
interesting, thank you!
Luca
On Thu, Jan 18, 2018 at 1:26 PM, Yuval Turgeman wrote:
> Hi Luca,
>
> We updated the FAQ [1] with a small script to help upgrade between major
> releases.
>
> [1] https://www.ovirt.org/node/faq/
>
> On Mon, Jan 15, 2018 at 10:21 AM,
Hi Luca,
We updated the FAQ [1] with a small script to help upgrade between major
releases.
[1] https://www.ovirt.org/node/faq/
On Mon, Jan 15, 2018 at 10:21 AM, Luca 'remix_tj' Lorenzetto <
lorenzetto.l...@gmail.com> wrote:
>
>
> On Thu, Jan 11, 2018 at 2:31 PM, Ryan Barry
Next-gen node (since 4.0) doesn't have any strong notion of "persistence",
unlike previous versions of oVirt Node.
My guess would be that /exports was not moved across to the new system.
The update process for Node is essentially:
* create a new lv
* unpack the squashfs in the new RPM and put
Note that, in the case of Node, the ovirt-release RPM should not be
installed. Mostly because it automatically enables a number of per-package
updates (such as vdsm) instead of installing a single image.
Trimming the repo files so they look like what is shipped in Node
(IgnorePkgs and OnlyPkgs)
On 29 December 2017 at 09:11, Michal Skrivanek
wrote:
>
>
>> On 29 Dec 2017, at 10:03, Ed Stout wrote:
>>
>> On 29 December 2017 at 08:42, Michal Skrivanek
>> wrote:
>>>
>>>
On 29 Dec 2017, at 09:34, Ed Stout
> On 29 Dec 2017, at 10:03, Ed Stout wrote:
>
> On 29 December 2017 at 08:42, Michal Skrivanek
> wrote:
>>
>>
>>> On 29 Dec 2017, at 09:34, Ed Stout wrote:
>>>
>>> Good Morning,
>>>
>>> Perhaps someone could clarify for
On 29 December 2017 at 08:42, Michal Skrivanek
wrote:
>
>
>> On 29 Dec 2017, at 09:34, Ed Stout wrote:
>>
>> Good Morning,
>>
>> Perhaps someone could clarify for me, please - to update oVirt Nodes
>> from 4.1.8 -> 4.2, should I just be able to yum
> On 29 Dec 2017, at 09:34, Ed Stout wrote:
>
> Good Morning,
>
> Perhaps someone could clarify for me, please - to update oVirt Nodes
> from 4.1.8 -> 4.2, should I just be able to yum install the 4.2
> release file, then yum update?
Hi,
yes, that should be the right one
Good Morning,
Perhaps someone could clarify for me, please - to update oVirt Nodes
from 4.1.8 -> 4.2, should I just be able to yum install the 4.2
release file, then yum update? Or, do I have to start with the 4.2
ISO then update from there?
When I try the former it fails with dependency issues
Hello Matt,
All the partitions will be persisted when gluster is installed on
the ovirt node since gluster recommends user not to create bricks in root
directory. If the gluster bricks are created in root partition then once
the update of the node is done, you will not be able to see any
On 12/15/2017 03:06 AM, Simone Tiraboschi wrote:
On Fri, Dec 15, 2017 at 4:45 AM, Donny Davis > wrote:
have you gotten an image update yet?
On Thu, Dec 14, 2017 at 8:08 PM, Matt Simonsen >
On Fri, Dec 15, 2017 at 4:45 AM, Donny Davis wrote:
> have you gotten an image update yet?
>
> On Thu, Dec 14, 2017 at 8:08 PM, Matt Simonsen wrote:
>
>> Hello all,
>>
>> I read at https://www.ovirt.org/develop/projects/node/troubleshooting/
>> that
have you gotten an image update yet?
On Thu, Dec 14, 2017 at 8:08 PM, Matt Simonsen wrote:
> Hello all,
>
> I read at https://www.ovirt.org/develop/projects/node/troubleshooting/
> that "Changes made from the command line are done at your own risk. Making
> changes has the
Hello all,
I read at https://www.ovirt.org/develop/projects/node/troubleshooting/
that "Changes made from the command line are done at your own risk.
Making changes has the potential to leave your system in an unusable
state." It seems clear that RPMs should not be installed.
Is this
ext week. Thanks for your help ;)
--
*Von:* Yuval Turgeman <yuv...@redhat.com>
*Gesendet:* Donnerstag, 30. November 2017 09:22:39
*An:* Kilian Ries
*Cc:* users
*Betreff:* Re: [ovirt-users] oVirt Node ng upgrade failed
Looks like it, yes - we try to add setfiles_t to
ff: Re: [ovirt-users] oVirt Node ng upgrade failed
Looks like it, yes - we try to add setfiles_t to permissive, because we assume
selinux is on, and if it's disabled, semanage fails with the error you
mentioned. Can you open a bug on this ?
If you would like to fix the system, you will need to
thanx for replying
Le 30/11/2017 à 10:19, Yuval Turgeman a écrit :
2 more questions -
1. Which ovirt repos are enabled on your node ?
centos-opstools-release/x86_64 CentOS-7 - OpsTools -
release 263
ovirt-4.1/7 Latest oVirt
2 more questions -
1. Which ovirt repos are enabled on your node ?
2. Can you share the output from `rpm -qa | grep ovirt-node-ng` ?
Thanks,
Yuval.
On Thu, Nov 30, 2017 at 11:02 AM, Nathanaël Blanchet
wrote:
>
>
> Le 30/11/2017 à 08:58, Yuval Turgeman a écrit :
>
> Hi,
>
>
Le 30/11/2017 à 08:58, Yuval Turgeman a écrit :
Hi,
Which version are you using ?
4.1.7
Thanks,
Yuval.
On Wed, Nov 29, 2017 at 4:17 PM, Nathanaël Blanchet > wrote:
Hi all,
I didn't find any explicit howto about upgrade of ovirt-node,
e problem? :/
> --
> *Von:* Yuval Turgeman <yuv...@redhat.com>
> *Gesendet:* Donnerstag, 30. November 2017 09:13:34
> *An:* Kilian Ries
> *Cc:* users
>
> *Betreff:* Re: [ovirt-users] oVirt Node ng upgrade failed
>
> Kilian, did you disable selinux by any chance ? (selinux=0 o
1 - 100 of 275 matches
Mail list logo