On 11/26/2018 06:03 PM, Paul Boven via USRP-users wrote:
Hi Marcus, everyone,
On 25/11/2018 19:47, Marcus D. Leech via USRP-users wrote:
OK, just tried the attached flow-graph in the lab, using:
[mleech@lab ~]$ uhd_usrp_probe --args addr=192.168.10.2
[INFO] [UHD] linux; GNU C++ version 4.8.3
Hi Marcus, everyone,
On 25/11/2018 19:47, Marcus D. Leech via USRP-users wrote:
OK, just tried the attached flow-graph in the lab, using:
[mleech@lab ~]$ uhd_usrp_probe --args addr=192.168.10.2
[INFO] [UHD] linux; GNU C++ version 4.8.3 20140911 (Red Hat 4.8.3-7);
Boost_105400;
On 11/25/2018 07:22 AM, Paul Boven via USRP-users wrote:
Hi again,
On 11/22/18 6:45 PM, Marcus D. Leech via USRP-users wrote:
Your radio block is set to a sample rate of 100e6, whereas the X310
uses a sample clock of 200e6. This may be why things are getting
stuffed up.
I've now tried
Hi again,
On 11/22/18 6:45 PM, Marcus D. Leech via USRP-users wrote:
Your radio block is set to a sample rate of 100e6, whereas the X310 uses
a sample clock of 200e6. This may be why things are getting
stuffed up.
I've now tried 200 MHz for the radio block. Still getting the same error
On 11/22/2018 12:37 PM, Paul Boven via USRP-users wrote:
Hi,
On 22/11/2018 16:20, Marcus D. Leech via USRP-users wrote:
On 11/22/2018 09:26 AM, Paul Boven via USRP-users wrote:
A simple flowgraph (see attached image) using RFNOC:Radio, RFNOC:DDC
and a QT GUI frequency, together with
Hi,
On 22/11/2018 16:20, Marcus D. Leech via USRP-users wrote:
On 11/22/2018 09:26 AM, Paul Boven via USRP-users wrote:
A simple flowgraph (see attached image) using RFNOC:Radio, RFNOC:DDC
and a QT GUI frequency, together with Device3, starts and runs but no
data is produced. Instead, it
On 11/22/2018 09:26 AM, Paul Boven via USRP-users wrote:
Hi everyone,
After quite a bit of trial and error, I've managed to build a GNU
Radio environment that includes RFNOC. My environment consists of:
uhd-3.14, gnuradio-3.7.13.4, gr-ettus (master).
uhd_usrp_probe shows that the X310 is
