Stanley did that tyre fit without modifying anything on the swingarm or the
placement of the axle washers?
Sam Blumenstein # 795
Stanley Manuel wrote:
Hi to all. I am new to the list,(South Africa) but have been following the
debate on rear tires with interest.For what it's worth,I have
In a message dated 9/26/2000 5:13:40 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
I have recently
fitted a 170/80 x 15 Michelin Tarmac. What a transformation!
Need I say more? I love this tire!
Frank
.
To unsubscribe go to
In a message dated 9/27/2000 4:42:55 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Stanley did that tyre fit without modifying anything on the swingarm or the
placement of the axle washers?
Yes it does. I had one on my late Vmax.
Frank
.
To
Stanley did that tyre fit without modifying anything on the swingarm or
the
placement of the axle washers?
Yes it does. I had one on my late Vmax.
I ordered one for my max from m.a.w. Man are they slow!
.
To unsubscribe go to
Hi guys,
While polishing up my mostly stock, '85 Max for Biketoberfest, I discovered
that the rubber bumpers on the top of the rear shocks have turned into
rubber powder! (and fell off the shocks upon pressure!)
I'm assuming they're there to prevent the shock piston from bottoming out
internally,
Hello all,
To make a long story short, I went racing this last weekend, for the
first time since I got my Nitrous system fully operational. I found that by
the end of the day, I couldn't keep the tire from spinning while heading
down the track. There were even times when the front wheel
Hey Chris,
I think that your best bet would be to find some kind soul on the list who's
replaced their rears with Works shocks and see if they'll give you a
humanitarian discount on the stock shocks they've removed OR call Hacksaw
(Furbur) at RMS and see if he's parting out a bike with a deal on
do you have a pic of that tire? Stanley did that tyre fit without modifying
anything on the swingarm or the
placement of the axle washers?
Yes it does. I had one on my late Vmax.
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
Don, you should get upto 6" rim in the stock swingarm, 5.5" to be on the
safe side. Don't know about the wheelie bars, probably well worth checking
out a few "drag" sites lists.. Careful with the driveshaft - "rumour" has
it that SOME (!) flex is built into the design to reduce the 'torque
Forgot to mention, John Furbur (RMS) s doing alternative shafts (but he's in
Oz right now...)
Steve
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Wayne, have you tried Comp. Accessories?
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Shocks were dead 15 yr's ago.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Don, better get ready to buy a bunch of driveshafts. With a bar and
tire, a stock max can twist one. How's the swingarm doing?
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
Date: Wed, 27 Sep 2000 07:20:28 -0700
From: "Don Seel" [EMAIL PROTECTED]
To: "Vmax tech list" [EMAIL PROTECTED]
Subject: drag slick
Message-ID: 002001c0288e$162ba500$[EMAIL PROTECTED]
Hello all,
To make a long story short, I went racing this last weekend, for the
first time
Hi Don! What jets are you running ? Is your engine stock?
Eric H.
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Schwinn bought up and produced Excelsior-Henderson motor cycles but stopped
production some time during the Great Depression, 1930? I believe the
Schwinn company was sold a few years back.
-Original Message-
From: Eric Harnish [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 26, 2000
I have the possibility to buy a pair of new 418 Progressive
for 300ยจ$ , new. BUT they are 12.5' what will be the result on my 94 Max
??
Tks for your (blue ?) light
PhM
It a sensation you don't forget, similiar to a friends 1150E turbo I
rode, 9:15@157. I bettered his 60 ft., but hit 3rd and the front came up
about 18". Stupid me I didn't back off, I liked it, and only bettered
his time a tenth. Stock driveshaft? I've seen them pop with a stock
motor and a bar
13" is stock length, so 1/2" won't be a problem.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
hi guys,
just to let ya know that i burned off my back tire until it blew
outYES ITS ON VIDEO...
I will let it known when I get it posted on the net. I had my
woman behind the camera, so the PRODUCTION sucked, they just dont
understand the importance of these things. but the EVENT was
I notice this when the bike is cold: kind of a short mechanical "clacking"
noise from under the top cover when I'm just starting out for a few blocks
only, then it's gone. What is it? Sorry if it's obvious; new Max owner!!!
thanx!
trueblue
21 matches
Mail list logo
