[vchkpw] offtopic sorry!
Hi! Good day, has anyone from you guys know how can i bypass rbl checking if the sender was already authenticated with smtp? i use spamcontrol implementation of smtpd-auth, i know this is not really the proper channel for this, but i'm really desperate to solve this issue Best regards, Ronaldo Chan !DSPAM:4abb7eef32712948025637!
Re: [vchkpw] offtopic sorry!
yeah, that's correct, i will try to check what ismail said of his post about using spamdyke. Thanks for your reply guys i really appreciate your input. Best regards, Ronaldo Chan On Sep 24, 2009, at 10:27 PM, Wouter van der Schagt wrote: You cannot because RBL checking happens before SMTP authentication as far as I know. Sincerely, - Wouter van der Schagt -- From: Ronaldo Chan ron...@revlink.ph Sent: Thursday, September 24, 2009 10:14 PM To: vchkpw@inter7.com Subject: [vchkpw] offtopic sorry! Hi! Good day, has anyone from you guys know how can i bypass rbl checking if the sender was already authenticated with smtp? i use spamcontrol implementation of smtpd-auth, i know this is not really the proper channel for this, but i'm really desperate to solve this issue Best regards, Ronaldo Chan !DSPAM:4abb938b32711057819470!
Re: Re[2]: [vchkpw] offtopic sorry!
Ismail, Thanks for your prompt reply, i'll check it today if can compare spamcontrol with spamdyke by apple to apple comparison. thanks for your reply guys, i really appreciate it. Best regards, Ronaldo Chan On Sep 24, 2009, at 10:38 PM, Ismail YENIGUL wrote: Hi Ronald, You can bypass RBL checking for authenticated users with spamdyke. (http://www.spamdyke.org ) A quote from web page: Full SMTP AUTH support, so your users can bypass all filters, even from remote locations. spamdyke can provide SMTP AUTH even if qmail is completely unpatched. Thanks. Thursday, September 24, 2009, 5:27:01 PM, you wrote: You cannot because RBL checking happens before SMTP authentication as far as I know. Sincerely, - Wouter van der Schagt -- From: Ronaldo Chan ron...@revlink.ph Sent: Thursday, September 24, 2009 10:14 PM To: vchkpw@inter7.com Subject: [vchkpw] offtopic sorry! Hi! Good day, has anyone from you guys know how can i bypass rbl checking if the sender was already authenticated with smtp? i use spamcontrol implementation of smtpd-auth, i know this is not really the proper channel for this, but i'm really desperate to solve this issue Best regards, Ronaldo Chan -- Ismail YENIGUL Endersys Ltd. Proje Yöneticisi / Project Manager Phone :+90 216-4709423 | Mobile:+90 533 747 36 65 Fax :+90 216-4709508 | web: http://www.endersys.com.tr Endersys blog açıldı. http://blog.endersys.com !DSPAM:4abb947832711725645914!
[vchkpw] vpopmail + existing openxchange LDAP
Hi List, Good day, has anyone from you guys know how can i integrate vpopmail with openxchange, having existing LDAP on openxchange groupware so that changing password to and from openxchange and vpopmail become seemless ?. TIA Ronald Chan
Re: [vchkpw] vpopmail + existing openxchange LDAP
yeah, your right that's why i post this question to list because i'm really sick and tired of making it to work :) in a hope somebody along the way has the same millage with me :) anyway thanks a lot On Feb 02, 2006 09:43 AM, Jeremy Kitchen [EMAIL PROTECTED] wrote: On Wednesday 01 February 2006 17:43, Ronaldo Chan wrote: Hi List, Good day, has anyone from you guys know how can i integrate vpopmail with openxchange, having existing LDAP on openxchange groupware so that changing password to and from openxchange and vpopmail become seemless ?. vpopmail uses a very specific LDAP schema. If you can get 'openxchange' to emulate this schema, then it will work. Otherwise, it will not. I believe there is a README.ldap file in the vpopmail source distribution, you should have a look at it :) -Jeremy -- Jeremy Kitchen ++ [EMAIL PROTECTED] In the beginning was The Word and The Word was Content-type: text/plain -- The Word of Bob.
Re: [vchkpw] eMPF patch for qmail under qmailrocks
Dadang Sulaeman wrote: On Fri, 2005-08-26 at 13:10 +0800, Ronaldo Chan wrote: Dadang Sulaeman wrote: is there a eMPF patch file for qmail under qmailrocks ? thanks Dadang, As far as i know as long you have smtp-auth patch you can also applied the eMPF patch. Ronald Chan Correct me if I'm wrong. I have got eMPF pacth created by Bill Shupp and I sure that its different with smtp-auth. its for administering rule and policy message. What do you think of? empf is a patch written by inter7.com, which allows you to create custome rules whether you will allow or deny some mails to relay or accept base on your criteria or policy. I think smpt-auth patch is one of the requirement of empf patch in order for this to work. i'm sorry i'm not aware of Bill Shupp pop toaster thing. My current setup is OpenBSD 3.7 qmail+spamcontrol+vpopmail+empf+qmail-scanner+spamassassin+procmail Ronald Chan
Re: [vchkpw] eMPF patch for qmail under qmailrocks
Dadang Sulaeman wrote: On Fri, 2005-08-26 at 14:12 +0800, Ronaldo Chan wrote: Dadang Sulaeman wrote: On Fri, 2005-08-26 at 13:10 +0800, Ronaldo Chan wrote: Dadang Sulaeman wrote: is there a eMPF patch file for qmail under qmailrocks ? thanks Dadang, As far as i know as long you have smtp-auth patch you can also applied the eMPF patch. Ronald Chan Correct me if I'm wrong. I have got eMPF pacth created by Bill Shupp and I sure that its different with smtp-auth. its for administering rule and policy message. What do you think of? empf is a patch written by inter7.com, which allows you to create custome rules whether you will allow or deny some mails to relay or accept base on your criteria or policy. I think smpt-auth patch is one of the requirement of empf patch in order for this to work. i'm sorry i'm not aware of Bill Shupp pop toaster thing. My current setup is OpenBSD 3.7 qmail+spamcontrol+vpopmail+empf+qmail-scanner+spamassassin+procmail Ronald Chan Hi Ronald, did you have build eMPF to your qmail successfully ? because I got an error when compiling 'make qmail-smtpd'. could you explain more easy for me ? thanks Yes i build it with my qmail installation successfully, our mileage may vary but i can only give you a tip on this since i don't use Bill Shupp's qmail toaster. Here's what you need on the stock qmail with qmail-auth patch you can get empf patch from inter7.com and follow instruction accordingly. Please remember empf patch rely on qmail-auth patch in order this to work. In your case since you are using Bill Shupp's qmail toaster i know it's heavily modified and you can't straight patch the empf to your qmail installation. Here is what you need base on the documentation i read from inter7.com Bill Shupp's qmail toaster eMPF patch created by Mike Tesliuk Do you have this patch on hand ? if yes please read them carefully on how to integrate it with your qmail installation. if there's a lot of error kicks in just reply on this e-mail and paste the original error message since, the list can't diagnose further problem if you are saying I got an error when compiling 'make qmail-smtpd'. Please be more specific the more error you provide the better of chances a lot of people helping you. Sorry friend for my wrong grammar since i'm not a native english speaker. Best regards, Ronald Chan
Re: [vchkpw] eMPF patch for qmail under qmailrocks
Dadang Sulaeman wrote: is there a eMPF patch file for qmail under qmailrocks ? thanks Dadang, As far as i know as long you have smtp-auth patch you can also applied the eMPF patch. Ronald Chan
Re: [vchkpw] create welcome message
dwi saSonO baktyo wrote: I have my mail server under qmailrocks guide (Fedora Core 3) and use vpopmail.5.4.9, actually im new in qmail and linux. could you help me how to built that patch into vpopmail.c file ? just download that vpopmail 5.4.9 and configure the same as your server configure, make ... and make install just for caution ... backup primary vpopmail binary. ps. i'm still not sure that you can do that by your self, but reading a couple documentation vpopmail will help you a lot. __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com it's too easy just download the patch and enjoy i assume you are in the vpopmail source directory $ patch -p1 your_patch_download_on_sourceforge then compile the vpopmail as always :) create /home/vpopmail/etc/welcome.msg with the following format From: [EMAIL PROTECTED] Subject: Welcome New user blah.. i test this patch on my OpenBSD production server it's working flawlessly. Ronald Chan
Re: [vchkpw] request
Christophe Casalegno wrote: Le Mardi 9 Août 2005 23:16, Saimir Hafizi a écrit : Hi there, One of the domain names cannot get messages on qmail, can send only. Any help will be appriciated. I.T Department Your problem is it that the delivery don't work or simply the get by POP ? best regards, Sir could you please be more specific or please ellaborate your problem :)
[vchkpw] qmailadmin + quota usage error
Hi Guys, Can someone from the group can explain why the user quota doesn't update properly on qmailadmin interface while on vuserinfo it display the correct usage. :) sorry if this question has been ask before. My setup is vpopmail 5.5.0 and qmailadmin 1.2.7 on OpenBSD 3.7 Ronald Chan
[vchkpw] courier-imap 4 + courier-authlib + authvchkpw + cdb
List, Hi everyone, is there anyone from the list know how can in link authvchkpw authentication modules using cdb instead of mysql ? i'm having problem to compile this modules but other's working as i expected. :) if i launch authdaemond it load's all the module flawlessly except for authvchkpw my setup is openbsd 3.7 + qmail-stock + spamcontrol + vpopmail + empf + qmail-scanner + courier-imap 4 Thanks Ronald Chan
Re: [vchkpw] Disable local relay
yes it's possible by using empf more information can be found here http://www.inter7.com/?page=empf - Original Message - From: michele To: vchkpw@inter7.com Sent: Friday, July 08, 2005 1:47 AM Subject: [vchkpw] Disable local relay Hi, it's possible to disable relaying for local domains? Our server host mail for domain.com; if i try to send a message from anothercomputerto [EMAIL PROTECTED], using our server as smtp server, it does allow relay: there is a way to prevent this? Thanks
Re: [vchkpw] Re: smtp after pop
Hi List, On my personal experience i use the combination of stock qmail + spamcontrol + vpopmail + eMail Messaging Policy Framework (eMPF) comes with inter7.com. spamcontrol can be found at http://www.fehcom.de/qmail/spamcontrol.html for me it has everything you need and i think the author himself is here on the list :) Best Regards --Ron - Original Message - From: Steve Cole [EMAIL PROTECTED] To: vchkpw@inter7.com Sent: Wednesday, July 06, 2005 4:56 AM Subject: Re: [vchkpw] Re: smtp after pop On Tuesday 05 July 2005 16:50, Peter Palmreuther wrote: Hello List, On Tuesday, July 5, 2005 at 7:24:19 PM patrick wrote: by the way: does anyone know a good howto to use smtp after pop with vpopmail? regards That's exactly 'roaming users' feature of vpopmail. Yes. Just so everyone is aware, it won't work with the latest versions of Courier-IMAP. You will need to find a 3.x series Courier-IMAP if you want to use that feature. SMTP-Auth is more flexible and works better, IMHO. It usually comes with LDAP baggage in the patch, though... if you don't need that functionality, you could perhaps hack it back out (I haven't tried). It also has traditionally conflicted with the chkuser patch, which I need for my Barracuda spam firewalls. Hope this helps. -- Cheers, Steve |President Systems Administrator, Kingston Online Services |(e pluribus unix) Multiple-T3/OC3 URL: http://www.kos.net/ |Business and Education partners in SouthEastern Ontario | |Through the firewall, out the router, down the OC3, across the |backbone, bounced from satellite, it's nothing but net.
Re: [vchkpw] qmail-tap patch + spamcontrol
qmail-tap patch can be found on http://www.inter7.com/?page=qmailtap New Release version 1.1 Mon Jun 6 13:18:04 CDT 2005 This version allows for setting a different email address for each line in the taps control file. The new syntax is email address to tap:Address to send the copy to. For example: [EMAIL PROTECTED]:[EMAIL PROTECTED] [EMAIL PROTECTED]:[EMAIL PROTECTED] * The qmail tap patch adds additional functionality: Specify which email addresses tap using a regex style control file. With the regex function, you can specify full domains or individual email addresses. * Specify which email address to send the tapped email address. * Qmail does not need to be restarted to change the above. Just update the taps control file. The regex match is applied to both the to and from email addresses. So email sent to or from the addresses will be copied. - Original Message - From: Erwin Hoffmann [EMAIL PROTECTED] To: vchkpw@inter7.com; vchkpw@inter7.com Sent: Friday, July 01, 2005 3:24 AM Subject: Re: [vchkpw] qmail-tap patch + spamcontrol Hi, At 15:56 30.06.2005 +0800, Ronald Chan wrote: Hi everyone, has anyone from you guys know is there a modified qmail-tap patch that can be integrate with spamcontrol found in www.fehcom.de/qmail/spamcontrol.htm i really want to integrate it since spamcontrol patch is a rock solid code for me, My current setup is OpenBSD 3.7 with Qmail-1.0.3 + spamcontrol patch + vpopmail + qmail-scanner. Please tell me more about the qmail-tab patch. What is it ? Where to find ? regards. --eh. Dr. Erwin Hoffmann | FEHCom | http://www.fehcom.de/ Wiener Weg 8, 50858 Cologne | T: +49 221 484 4923 | F: ...24