[vdr] alphacrypt cam upgrade to version 3.12

2008-01-13 Thread Simon Baxter
Hi Can anyone tell me how to upgrade my alphacrypt CAM to version 3.12 (New Zealand)? One of mine is running 3.09 and I can't decrypt multi-channels in a boquet. My cable provider doesn't support upgrade over PIDs - so I need some manual way from a PC. Thanks Simon

Re: [vdr] BUG: DVB-T and DVB-S[2] do not work with VDR multiproto

2008-01-13 Thread Reinhard Nissl
Hi, Reinhard Nissl schrieb: Please report the debug output here for further investigation. Please report the relevant channel from VDR-1.4.x' channel.conf and from VDR-1.5.12's channel.conf too. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED]

[vdr] alphacrypt cam upgrade to version 3.12

2008-01-13 Thread Martin Binder (AON)
Hi Simon, Mascom provides an update here: http://www.alphacrypt.de/Updates.36.0.html It's only in german - if you need help: write me a PM. Regards Martin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Simon Baxter Sent: Sunday, January 13,

Re: [vdr] alphacrypt cam upgrade to version 3.12

2008-01-13 Thread Frank Enderle
hi simon, i think you need the following file. http://devel.mascom.de:8080/cms1/fileadmin/user_upload/Dateien/Bedienungsanleitungen/AlphaCryptUpdate3_12_Classic.zip unfortunately the whole thing is written in german. i hope this is correct: 1. install the correct driver for your os. the system

[vdr] BUG: DVB-T and DVB-S[2] do not work with VDR multiproto

2008-01-13 Thread Morfsta
I spent the whole evening with Manu looking through the emulation layer and cannot see any obvious errors in the DVB-T case. Thank-you very much for your time. Then use VDR-1.4.x (limited to only one device) and tune to a certain DVB-T channel. Have a look what the driver reports (see

[vdr] BUG: DVB-T and DVB-S[2] do not work with VDR multiproto

2008-01-13 Thread Morfsta
Please report the relevant channel from VDR-1.4.x' channel.conf and from VDR-1.5.12's channel.conf too. 1.4.x: - BBC ONE;BBC:73000:I0C34D34M16B8T2G32Y0:T:27500:600:601=eng,602=eng:0:0:4165: 9018:4101:0 1.5.12: - BBC

Re: [vdr] [ANNOUNCE] DVB-S2 + H.264 support for VDR-1.5.12

2008-01-13 Thread Hagen Schöbel
I have an problem with the original patch to vdr-1.5.12: [EMAIL PROTECTED]:/usr/local/src/vdr-1.5.12-dvbs2# make g++ -g -O2 -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DLIRC_DEVICE=\/dev/lircd\ -DRCU_DEVICE=\/dev/ttyS1\ -D_GNU_SOURCE -DVIDEODIR=\/video\ -DCONFDIR=\/video\

Re: [vdr] [ANNOUNCE] DVB-S2 + H.264 support for VDR-1.5.12

2008-01-13 Thread Stefan Lucke
On Sunday 13 January 2008, Hagen Schöbel wrote: I have an problem with the original patch to vdr-1.5.12: [EMAIL PROTECTED]:/usr/local/src/vdr-1.5.12-dvbs2# make g++ -g -O2 -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DLIRC_DEVICE=\/dev/lircd\ -DRCU_DEVICE=\/dev/ttyS1\ -D_GNU_SOURCE

Re: [vdr] Rotor patch for 1.5.12

2008-01-13 Thread Morfsta
Has anyone managed to get the signal strength, SNR and lock functions working with multiproto and rotor 1.5.12? I took a look at menu.c and compared it with szap2 but couldn't find much difference! On Jan 11, 2008 10:21 PM, Reinhard Nissl [EMAIL PROTECTED] wrote: Hi, lucian orasanu schrieb:

[vdr] [ANNOUNCE] VDR developer version 1.5.13

2008-01-13 Thread Klaus Schmidinger
VDR developer version 1.5.13 is now available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.13.tar.bz2 A 'diff' against the previous developer version is available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.12-1.5.13.diff WARNING: This is a *developer* version. Even

[vdr] vdr 1.5.13 (and earlier)

2008-01-13 Thread Tony Grant
I noticed that I could no longer see channels with vertical polarisation - this used to work must have stopped last week. Channels: BBC 2 England;BSkyB:10773:hC56:S28.2E:22000:... etc. works ITV1 London;BSkyB:10759:vC56:S28.2E:22000:... blanks screen vdr 1.5.13, vdr-xine 0.8 Any ideas?

Re: [vdr] vdr 1.5.13 (and earlier)

2008-01-13 Thread Gregoire Favre
On Sun, Jan 13, 2008 at 05:08:24PM +0100, Tony Grant wrote: I noticed that I could no longer see channels with vertical polarisation - this used to work must have stopped last week. Channels: BBC 2 England;BSkyB:10773:hC56:S28.2E:22000:... etc. works ITV1

Re: [vdr] vdr 1.5.13 (and earlier)

2008-01-13 Thread Tony Grant
Le dimanche 13 janvier 2008 à 17:33 +0100, Gregoire Favre a écrit : I can't test vdr-1.5.13 because a VDR without DVB-S2 isn't fun at all, but with vdr-1.5.12 with DVB-S2 support I can perfectly tune to : ITV1

Re: [vdr] vdr 1.5.13 (and earlier)

2008-01-13 Thread Tony Grant
Le dimanche 13 janvier 2008 à 17:33 +0100, Gregoire Favre a écrit : On Sun, Jan 13, 2008 at 05:08:24PM +0100, Tony Grant wrote: I noticed that I could no longer see channels with vertical polarisation - this used to work must have stopped last week. Channels: BBC 2

Re: [vdr] BUG: DVB-T and DVB-S[2] do not work with VDR multiproto

2008-01-13 Thread Reinhard Nissl
Hi, Morfsta schrieb: Please report the debug output here for further investigation. Attached are two files - tuning to the same DVB-T channel using either system and the Philips frontend... vdr-1.4.x shows the channel fine, 1.5.12 does not. Hope this helps and thanks again for your

[vdr] error compiling vdr-xine

2008-01-13 Thread serge pecher
Hello, I did install ffmpeg, xine-lib 1.2, and xine-ui to get vdr-xine working. After searching a bit I achieve to compile the 3 first one, but I have an error with make plugins. Input_vdr.h is missing. I can't find that file on my system. The make process tell me to patch xine-lib, but in

Re: [vdr] error compiling vdr-xine

2008-01-13 Thread Reinhard Nissl
Hi, serge pecher schrieb: I did install ffmpeg, xine-lib 1.2, and xine-ui to get vdr-xine working. After searching a bit I achieve to compile the 3 first one, but I have an error with make plugins. Input_vdr.h is missing. I can’t find that file on my system. The make process tell me

Re: [vdr] Rotor patch for 1.5.12

2008-01-13 Thread Ales Jurik
On Thursday 10 January 2008, Reinhard Nissl wrote: Hi, lucian orasanu schrieb: it is changed after patch with function above and in menu.c at line 304 is expecting another function like this: SChannel-cChannel::SetSatTransponderData(RotorPos-R_Code(),Frequenz,Pol

Re: [vdr] vdr 1.5.13 (and earlier)

2008-01-13 Thread Ales Jurik
On Sunday 13 January 2008, Gregoire Favre wrote: On Sun, Jan 13, 2008 at 05:08:24PM +0100, Tony Grant wrote: I noticed that I could no longer see channels with vertical polarisation - this used to work must have stopped last week. Channels: BBC 2

Re: [vdr] vdr 1.5.13 (and earlier)

2008-01-13 Thread Gregoire Favre
On Sun, Jan 13, 2008 at 09:38:37PM +0100, Ales Jurik wrote: Hi Gregoire, there is no problem - vdr-1.5.13 is vdr-1.5.12-dvbs2-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff compatible. I'm using it just now ;) . OoO ;-) I should have tried... Thank for the info

Re: [vdr] vdr 1.5.13 (and earlier)

2008-01-13 Thread Gregoire Favre
Hello, ITV1 London;BSkyB:10758:vC56S0Z0:S28.2E:22000:2305:2310=eng,2314=NAR:2315:0:10060:2:2044:0 is still working with vdr-1.5.13 here. -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre

[vdr] Multiproto problem tuning some channels

2008-01-13 Thread Ales Jurik
Hi, there is very difficult (or practically impossible) to tune some stations with nominal values in channels.conf. But if increasing SR it is possible. It was reported by another user in cssf.cz forum, too. Example: No possible: City

Re: [vdr] Rotor patch for 1.5.12

2008-01-13 Thread Ales Jurik
On Sunday 13 January 2008, Morfsta wrote: Has anyone managed to get the signal strength, SNR and lock functions working with multiproto and rotor 1.5.12? I took a look at menu.c and compared it with szap2 but couldn't find much difference! Hi, I've tried to pass through the source code and it

[vdr] H.264 VPID's

2008-01-13 Thread ShorTie
Been playing with this genpix, hd and xine. Pretty much got everything running except for 1 thing seems to be hiding from me. For vdr to be able to tune to a hd channel I need to add 1 to the vpid’s which I do in my nscan/convert/pad10 no biggie. The problem is that when I tune away from a