[vdr] Issue with VDR-2.0.4 and IPTV-2.0.0 plugin
Hi, I've installed IPTV-2.0.0 on VDR-2.0.4 to view IP channels from my DSL provider. No problem on compilation and installation. Unfortunately, I've an issue : - when viewing channels via vdr => sound is OK but video freezes **every** seconds. - when viewing channels via vlc (outside vdr) => no problem. In vdr plugin menu, I tried to change buffer value and % prefill buffer without success. And filters are selected on "NO". I can't determine if problem comes from vdr or from iptv-plugin. Did I missed something ? Is there any special patch to apply ? Could you please help me to fix this issue ? Regards. Karim ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] searching a HW problem
Hello, an additional amplifier for the signal solved the problem. So it was HW related. Best regards & Thanks for the hints, Torsten Am Sonntag, 13. Oktober 2013, 18:14:13 schrieb Torsten Mohr: > Hello, > > i have a VDR up and running, the SW works fine so far (at least i think so). > > Some recordings are half-corrupted, have breaks inbetween, bad sound, etc. > > The bad-quality problem is not related to a certain channel, i wonder how i > can track this down. > > My hardware: > 2 (TWO !) Terratec Cinergy PCI cards. <-- two cards > MSI C847 MS-E33 board > > I use DVB-C. > > The cable goes into me set-top-box, out to PCI card 1, from there out to > PCI card 2. > > > I wonder if i can detect somehow which card did which recording? > > Is there a way to force a recording to happen on a certain card? > > > Thanks for any hints > Torsten > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no image with TeVii S464
If you always have a good signal with your Nexus then the problem is not the lnb or cable. BTW, unfortunately the signal meter is unreliable for a lot of cards because they don't follow a standardized metric. It works for some cards, for others it's basically useless. Other things to consider... Is the driver for your TeVii S464 known to be good/solid/stable? If not, the driver might be to blame. Is your card correctly detected by the driver or do you have to manually tell it which card you're using? Is the tuner on the card overheating? If the copper core wire was cut too short, it can cause inconsistent signal with some connectors, or no signal at all even if it works fine with a different connector. Basically there is not enough information to know the source of your issue. You've got to do further investigation. On Sun, Oct 27, 2013 at 8:12 AM, Sergio Daniel Gomez wrote: > El 27/10/13 11:11, Peter Münster escribió: > >> Hi, >> >> This is probably not a VDR problem, but I guess that here are people who >> could help perhaps. >> >> I use the femon plugin to check the signal, and there is only some 20% >> of the first line (red), when I test my brand new TeVii S464, and no >> image. >> >> When I replace the card with my old >> "Technotrend/Hauppauge WinTV Nexus-S rev2.X", I get green signals and an >> image, so it seems that everything is fine with my dish. >> >> Is there some configuration issue, or is this new card just broken? >> Or do I need another LNB? >> >> TIA for any hints, >> > > Hi. > 20% it's poor signal. To check lnb you can put your hand between dish and > lnb, signal must to change. If not, the problem it's with lnb. > Regards. > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no image with TeVii S464
El 27/10/13 11:11, Peter Münster escribió: Hi, This is probably not a VDR problem, but I guess that here are people who could help perhaps. I use the femon plugin to check the signal, and there is only some 20% of the first line (red), when I test my brand new TeVii S464, and no image. When I replace the card with my old "Technotrend/Hauppauge WinTV Nexus-S rev2.X", I get green signals and an image, so it seems that everything is fine with my dish. Is there some configuration issue, or is this new card just broken? Or do I need another LNB? TIA for any hints, Hi. 20% it's poor signal. To check lnb you can put your hand between dish and lnb, signal must to change. If not, the problem it's with lnb. Regards. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] no image with TeVii S464
Hi, This is probably not a VDR problem, but I guess that here are people who could help perhaps. I use the femon plugin to check the signal, and there is only some 20% of the first line (red), when I test my brand new TeVii S464, and no image. When I replace the card with my old "Technotrend/Hauppauge WinTV Nexus-S rev2.X", I get green signals and an image, so it seems that everything is fine with my dish. Is there some configuration issue, or is this new card just broken? Or do I need another LNB? TIA for any hints, -- Peter ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr