Hello, an additional amplifier for the signal solved the problem. So it was HW related.
Best regards & Thanks for the hints, Torsten Am Sonntag, 13. Oktober 2013, 18:14:13 schrieb Torsten Mohr: > Hello, > > i have a VDR up and running, the SW works fine so far (at least i think so). > > Some recordings are half-corrupted, have breaks inbetween, bad sound, etc. > > The bad-quality problem is not related to a certain channel, i wonder how i > can track this down. > > My hardware: > 2 (TWO !) Terratec Cinergy PCI cards. <-- two cards > MSI C847 MS-E33 board > > I use DVB-C. > > The cable goes into me set-top-box, out to PCI card 1, from there out to > PCI card 2. > > > I wonder if i can detect somehow which card did which recording? > > Is there a way to force a recording to happen on a certain card? > > > Thanks for any hints > Torsten > > > _______________________________________________ > vdr mailing list > email@example.com > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list firstname.lastname@example.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr