Having pulled out my hair so far over the weekend, I have figured out,
that maybe, I need to change the ca field in channels.conf. After a scan
from dvbscan, it is set to 0, which appearantly means fta. Changing it
to 1 isn't a magical fix, but I think it is something that is needed?
After this
Hi,
Try the following:
set in menu-settings-dvb
Update channels to add new transponders
then press ok.
Then set the ca field to unencrypted and switch to that channel in vdr.
Vdr should detect the ca field and change the vallue.
HTH.
Halim
Halim Sahin
E-Mail:
Success!
I removed the pvrinput plugin and set the update to add new transponders on.
And after doing a new dvbscan vdr made it all worked. Incidently, my
smartcard is properly updated now too (in the log, it said somewhere
that the start/end dates was 1 jan 1990; those read reasonable values
Ok, i found that i get the debugging from running vdr and piping it
output to a file. I removed the log serial numbers hopefully. I can't
see anything wrong though, i changed from fta, to encrypted channels and
back, also went through the cam menu while on the encrpyted channels.
Do I need to do
Hello all,
I have recently purchased a TechnoTrend 1500 DVB-T PCI card with CI
daughter board. I also have an official CAM and Smartcard for our local
DVB-T service. The DVB-T in the air broadcasts 4 FtA channels and the
rest encrypted. I can scan and find all the channels properly. Also
I think this should be it with CI enabled in the source, any easy way I
can check this on the binary?
Dec 16 22:18:38 erin vdr: [14866] switching to channel 42
Dec 16 22:18:38 erin vdr: [15019] transfer thread ended (pid=14866,
tid=15019)
Dec 16 22:18:38 erin vdr: [14866] buffer stats: 2632 (0%)
I think it's working I got this from my cam in my message:
Dec 17 00:24:01 erin vdr: [14866] CAM 1: Menu --
Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Conax Conditional Access'
Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Main menu'
Dec 17 00:24:01 erin vdr: [14866] CAM 1: