As far as Igor's confirmation on "channel not available"
I get this message only on DVB-S2 encrypted channels. I dont get it on
encrypted DVB-S channels.
As far as Reinhard's suggestion for the Initial channel (to tune for a
few minutes before the card actually tunes), I could not get a sustaine
So, I have checked on my VDR 170 your issue. I can confirm that on encrypted
dvb/s dvb/s2 channels I receive the message "Channal not available"
But you can fix it easy :)
Go to Menu - Setup - Update channels - NO
after that go to the channels edit (red button) - change CA field from
encrypted
Hi,
Vangelis Nonas schrieb:
> When I switch to Initial channel I dont get the channel not available
> message, however I dont get a picture as well. I believe that this
> channel is not receivable, at least not at my location. Following is my
> log when starting vdr with BBC World, then switch
When I switch to Initial channel I dont get the channel not available
message, however I dont get a picture as well. I believe that this
channel is not receivable, at least not at my location. Following is my
log when starting vdr with BBC World, then switching to Initial, then
back to BBC Worl
Hi,
can you try this FTA channel, which broadcasts MPEG2 via DVB-S2
at Hotbird 13.0 E:
Initial;ITI:11449:hC23M5O35S1:S13.0E:27500:519:0:0:0:15100:318:1300:0
BTW: your syslog excerpt didn't show messages like
May 10 18:04:03 video vdr: [6165] cVideoRepacker: switching to
MPEG1/2 mode
just
Ma
This is my log from vdr-1.7.0 changing to HD Suisse (1853) then to Sky
Sport HD 1 (1854) and then back to HD Suisse:
May 10 18:49:12 vagoshome vdr: [4815] receiver on device 1 thread
started (pid=4774, tid=4815)
May 10 18:49:12 vagoshome vdr: [4816] TS buffer on device 1 thread
started (pid=477
My multiproto version is not the latest, it is changeset 7205 dated a
couple of months ago. My modified szap is dated from that date also, but
it does not compile with multiproto plus. I cant find the exact links I
downloaded multiproto and modified szap but they were mentioned on the
linux-dvb
> As far as trying vdr with clear DVB-S2 channels, unfortunately it is not
> possible in my case since I only have access to Hotbird, which I think
> has no clear DVB-S2 channels.
yes, you are right - on Hotbird the open dvb-s2 channels absent
http://www.lyngsat.com/hd/hotbird.html
> As fas as
As far as trying vdr with clear DVB-S2 channels, unfortunately it is not
possible in my case since I only have access to Hotbird, which I think
has no clear DVB-S2 channels.
As fas as changing encrypted flag, vpid, ppid and dpid, can you please
give me an example, what I have to change in the f
> Vangelis Nonas wrote:
> > I dont think that this is the case because with encrypted DVB-S channels
> > I get a blank screen but NOT the message "channel not available". I get
> > this message ONLY on DVB-S2 channels. I can perfectly watch HD Suisse
> > which is DVB-S.
>
> with vdr 1.7 and the
Vangelis Nonas wrote:
> I dont think that this is the case because with encrypted DVB-S channels
> I get a blank screen but NOT the message "channel not available". I get
> this message ONLY on DVB-S2 channels. I can perfectly watch HD Suisse
> which is DVB-S.
with vdr 1.7 and the patch it´s po
Nonas <[EMAIL PROTECTED]>
To: VDR Mailing List
Date: Fri, 09 May 2008 22:46:04 +
Subject: Re: [vdr] Can not view DVB-S2 channels
>
> I dont think that this is the case because with encrypted DVB-S channels
> I get a blank screen but NOT the message "channel not available&quo
EMAIL PROTECTED]>
> To: VDR Mailing List <[EMAIL PROTECTED] org>
> Date: Fri, 09 May 2008 20:52:46 +
> Subject: Re: [vdr] Can not view DVB-S2 channels
>
>
>> Nobody has this problem? Any suggestions?
>>
>> Thanks
>> Vagelis
>>
>>
>&
the channels in your channels.conf are encrypted , thta's why vdr couldn't open
them
-Original Message-
From: Vangelis Nonas <[EMAIL PROTECTED]>
To: VDR Mailing List <[EMAIL PROTECTED] org>
Date: Fri, 09 May 2008 20:52:46 +0000
Subject: Re: [vdr] Can not view DVB-S2
Nobody has this problem? Any suggestions?
Thanks
Vagelis
NONAS EUAGGELOS wrote:
> Dear All,
>
> I have a skystar hd and I am using vdr 1.7.0 with the h264 patch and xine for
> output device as described here:
>
> http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine
>
> The only cha
Dear All,
I have a skystar hd and I am using vdr 1.7.0 with the h264 patch and xine for
output device as described here:
http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine
The only channel I am able to watch is HD Suisse. I can not watch any other
dvb-s2 or h264 channel. When I z
16 matches
Mail list logo