On 20.02.11 21:31, Udo Richter wrote:
I've uploaded the final patch version of the h.264 NALU fill removal for
VDR 1.7.16.
which config parameter I must set in the setup.conf to enable this
patch? (I have no video output on my recording machine, so OSD is not
working)
Thanks,
Matthias
--
"
Excellent news!
I am sure the entire rotor vdr community will be very glad to hear that!
At the moment I use diseqc.conf with goto position commands for each sat
position to move the dish
With rotor-ng does diseqc use have to be switched off in vdr and the plugin
takes care of everything or doe
On Tue, Mar 22, 2011 at 12:05 PM, Arturo Martinez wrote:
> Excellent news!
> I am sure the entire rotor vdr community will be very glad to hear that!
> At the moment I use diseqc.conf with goto position commands for each sat
> position to move the dish
> With rotor-ng does diseqc use have to be sw
On Tue, Mar 22, 2011 at 5:41 AM, Morfsta wrote:
> At the moment you need to manually edit the file to set the positions
> up. A later version might include assigning or changing the position
> numbers directly in the plugin interface.
>
> I should at this point thank Luca Olivetti for all his work
I get smoe of the terms confused. gotox is where you tell it the sat
postion such as 97w and it goes there as vs telling it to go to a stored
location? If that is the case, then gotox is needed as a way to get the
rotor to a location.
Also, VDR Diseqc should be on to use rotor as well as switc
maybe once it's cleaned up and fully functional, in can be intigrated
with vdr.
On 3/22/2011 8:49 AM, VDR User wrote:
On Tue, Mar 22, 2011 at 5:41 AM, Morfsta wrote:
At the moment you need to manually edit the file to set the positions
up. A later version might include assigning or changing t
Am 22.03.2011 09:16, schrieb Matthias Fechner:
> On 20.02.11 21:31, Udo Richter wrote:
>> I've uploaded the final patch version of the h.264 NALU fill removal for
>> VDR 1.7.16.
>
> which config parameter I must set in the setup.conf to enable this
> patch? (I have no video output on my recording