Re: [vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)
Success! I removed the pvrinput plugin and set the update to add new transponders on. And after doing a new dvbscan vdr made it all worked. Incidently, my smartcard is properly updated now too (in the log, it said somewhere that the start/end dates was 1 jan 1990; those read reasonable values now. In any case, with pvrinput, i had the xineliboutput setup that the OSD was partially transparant and 'smooth'. Changing specific settings (cropping, overscanning etc) made the menu be non-transparant and extremly slow. Before, I _think_ my FTA channels worked that way too, but now, I can't seem to get the background to be transparant. I'm guessing I could remove my xineliboutput settings, but i'm sure there's an easier way? One other strange thing, in the DVB menu my dvb card is listed 2nd card. If i change it to first, all goes away again. I guess the easy way is to reset my config and start over :) (For the next few months, I might want to keep my PVR somewhere highup, channels 50+) Anyway! I checked what my channels.conf said, and my CA or CA-ID (caid) field was changed to B00. zap and i think my CAM menu mentioned that my cam was 0x0b00. So VDR entered my CA to the Cam id. Hopefully google will pick this up for anybody searching for this stuff sometime in the future :) On 12/18/10 22:18, Halim Sahin wrote: > Hi, > Try the following: > set in menu->settings->dvb > Update channels to add new transponders > then press ok. > Then set the ca field to unencrypted and switch to that channel in vdr. > Vdr should detect the ca field and change the vallue. > HTH. > Halim > > > Halim Sahin > E-Mail: > halim.sahin (at) t-online.de > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)
Hi, Try the following: set in menu->settings->dvb Update channels to add new transponders then press ok. Then set the ca field to unencrypted and switch to that channel in vdr. Vdr should detect the ca field and change the vallue. HTH. Halim Halim Sahin E-Mail: halim.sahin (at) t-online.de ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)
Having pulled out my hair so far over the weekend, I have figured out, that maybe, I need to change the ca field in channels.conf. After a scan from dvbscan, it is set to 0, which appearantly means fta. Changing it to 1 isn't a magical fix, but I think it is something that is needed? After this however, I am kinda stuck. There is hardly anything to be found on this subject and most/all info I find is about softcams and cardsharing. Nobody has any pointer in the right direction to get VDR working with a hardware cam? Thanks, Oliver On 12/17/10 22:21, Oliver Schinagl wrote: > And this time, with the log actually attached. > > On 12/17/10 22:18, Oliver Schinagl wrote: >> Ok, i found that i get the debugging from running vdr and piping it >> output to a file. I removed the log serial numbers hopefully. I can't >> see anything wrong though, i changed from fta, to encrypted channels and >> back, also went through the cam menu while on the encrpyted channels. >> >> Do I need to do anything with channels.conf to let it know i have >> encrypted channels? I just piped the output from dvbscan to >> channels.conf ... >> >> oliver >> >> >> ___ >> vdr mailing list >> vdr@linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)
Ok, i found that i get the debugging from running vdr and piping it output to a file. I removed the log serial numbers hopefully. I can't see anything wrong though, i changed from fta, to encrypted channels and back, also went through the cam menu while on the encrpyted channels. Do I need to do anything with channels.conf to let it know i have encrypted channels? I just piped the output from dvbscan to channels.conf ... oliver On 12/17/10 00:36, Oliver Schinagl wrote: > I think it's working I got this from my cam in my message: > > > Dec 17 00:24:01 erin vdr: [14866] CAM 1: Menu -- > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Conax Conditional Access' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Main menu' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Subscription status' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Event status' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Tokens status' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Change CA PIN' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Maturity Rating' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Modem Ordering' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'About Conax CA' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Message' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Language' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Loader status' > Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press > 'EXIT' to return' > Dec 17 00:24:02 erin vdr: [14866] max. latency time 3 seconds > Dec 17 00:24:03 erin vdr: [14866] CAM 1: select 0 > Dec 17 00:24:03 erin vdr: [14866] CAM 1: Menu -- > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Conax Conditional Access' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Subscription status' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Name: Digitenne ' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Start date 01. Dec 2010 01. > Jan 1990' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'End date 31. Dec 2010 01. > Jan 1990' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Entitlement 010b 01ff' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'The First Entitlement' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'The End Entitlement' > Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'OK - view subscription status' > Dec 17 00:24:39 erin vdr: [15132] ERROR: no useful data seen within > 10540220 byte of video stream > Dec 17 00:27:48 erin vdr: [15132] PES packet shortened to 27080 bytes > (expected: 53845 bytes) > Dec 17 00:30:32 erin vdr: [14866] CAM 1: select 4 > Dec 17 00:30:33 erin vdr: [14866] CAM 1: Menu -- > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Conax Conditional Access' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Subscription status' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Name: Digitenne ' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Start date 01. Dec 2010 01. > Jan 1990' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'End date 31. Dec 2010 01. > Jan 1990' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Entitlement 010b 01ff' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'The First Entitlement' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'The End Entitlement' > Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'OK - view subscription status' > Dec 17 00:30:33 erin vdr: [14866] [xine..put] OSD bandwidth: 1077562 > bytes/s (8418 kbit/s) > Dec 17 00:30:34 erin vdr: [14866] CAM 1: Menu -- > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Conax Conditional Access' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Main menu' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Subscription status' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Event status' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Tokens status' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Change CA PIN' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Maturity Rating' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Modem Ordering' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'About Conax CA' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Message' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Language' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Loader status' > Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press > 'EXIT' to return' > Dec 17 00:30:35 erin vdr: [14866] [xine..put] OSD bandwidth: 918770 > bytes/s (7177 kbit/s) > Dec 17 00:30:35 erin vdr: [14866] CAM 1: select 1 > Dec 17 00:30:36 erin vdr: [14866] CAM 1: Menu -- > Dec 17 00:30:36 erin vdr: [14866] CAM 1: '' > Dec 17 00:30:36 erin vdr: [14866] CAM 1: 'No Entitlement!' > Dec 17 00:30:36 erin vdr: [14866] [xine..put] OSD bandwidth: 857737 > bytes/s (6701 kbit/s) > Dec 17 00:30:37 erin vdr: [14866] CAM 1: Menu -- > Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Conax Conditional Access' > Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Main menu' > Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Subscription status' > Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Event status' > Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Tokens stat
Re: [vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)
I think it's working I got this from my cam in my message: Dec 17 00:24:01 erin vdr: [14866] CAM 1: Menu -- Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Conax Conditional Access' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Main menu' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Subscription status' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Event status' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Tokens status' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Change CA PIN' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Maturity Rating' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Modem Ordering' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'About Conax CA' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Message' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Language' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Loader status' Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press 'EXIT' to return' Dec 17 00:24:02 erin vdr: [14866] max. latency time 3 seconds Dec 17 00:24:03 erin vdr: [14866] CAM 1: select 0 Dec 17 00:24:03 erin vdr: [14866] CAM 1: Menu -- Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Conax Conditional Access' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Subscription status' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Name: Digitenne ' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Start date 01. Dec 2010 01. Jan 1990' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'End date 31. Dec 2010 01. Jan 1990' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Entitlement 010b 01ff' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'The First Entitlement' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'The End Entitlement' Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'OK - view subscription status' Dec 17 00:24:39 erin vdr: [15132] ERROR: no useful data seen within 10540220 byte of video stream Dec 17 00:27:48 erin vdr: [15132] PES packet shortened to 27080 bytes (expected: 53845 bytes) Dec 17 00:30:32 erin vdr: [14866] CAM 1: select 4 Dec 17 00:30:33 erin vdr: [14866] CAM 1: Menu -- Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Conax Conditional Access' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Subscription status' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Name: Digitenne ' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Start date 01. Dec 2010 01. Jan 1990' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'End date 31. Dec 2010 01. Jan 1990' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Entitlement 010b 01ff' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'The First Entitlement' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'The End Entitlement' Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'OK - view subscription status' Dec 17 00:30:33 erin vdr: [14866] [xine..put] OSD bandwidth: 1077562 bytes/s (8418 kbit/s) Dec 17 00:30:34 erin vdr: [14866] CAM 1: Menu -- Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Conax Conditional Access' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Main menu' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Subscription status' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Event status' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Tokens status' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Change CA PIN' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Maturity Rating' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Modem Ordering' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'About Conax CA' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Message' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Language' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Loader status' Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press 'EXIT' to return' Dec 17 00:30:35 erin vdr: [14866] [xine..put] OSD bandwidth: 918770 bytes/s (7177 kbit/s) Dec 17 00:30:35 erin vdr: [14866] CAM 1: select 1 Dec 17 00:30:36 erin vdr: [14866] CAM 1: Menu -- Dec 17 00:30:36 erin vdr: [14866] CAM 1: '' Dec 17 00:30:36 erin vdr: [14866] CAM 1: 'No Entitlement!' Dec 17 00:30:36 erin vdr: [14866] [xine..put] OSD bandwidth: 857737 bytes/s (6701 kbit/s) Dec 17 00:30:37 erin vdr: [14866] CAM 1: Menu -- Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Conax Conditional Access' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Main menu' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Subscription status' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Event status' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Tokens status' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Change CA PIN' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Maturity Rating' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Modem Ordering' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'About Conax CA' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Message' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Language' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Loader status' Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press 'EXIT' to return' On 12/16/10 22:19, Oliver Schinagl wrote: > I think this should be it with CI enabled in the source, any easy way I > can check this on the binary? >
Re: [vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)
I think this should be it with CI enabled in the source, any easy way I can check this on the binary? Dec 16 22:18:38 erin vdr: [14866] switching to channel 42 Dec 16 22:18:38 erin vdr: [15019] transfer thread ended (pid=14866, tid=15019) Dec 16 22:18:38 erin vdr: [14866] buffer stats: 2632 (0%) used Dec 16 22:18:38 erin vdr: [15022] transfer thread started (pid=14866, tid=15022) Dec 16 22:18:38 erin vdr: [15021] TS buffer on device 1 thread ended (pid=14866, tid=15021) Dec 16 22:18:38 erin vdr: [15020] buffer stats: 2256 (0%) used Dec 16 22:18:38 erin vdr: [15020] receiver on device 1 thread ended (pid=14866, tid=15020) Dec 16 22:18:38 erin vdr: [15023] receiver on device 1 thread started (pid=14866, tid=15023) Dec 16 22:18:38 erin vdr: [15024] TS buffer on device 1 thread started (pid=14866, tid=15024) Dec 16 22:18:38 erin vdr: [15025] osdteletext-receiver thread started (pid=14866, tid=15025) Dec 16 22:18:39 erin vdr: [15022] [xine..put] Detected video size 704x576 Dec 16 22:18:39 erin vdr: [15022] setting audio track to 1 (0) Dec 16 22:18:43 erin vdr: [14866] switching to channel 64 Dec 16 22:18:43 erin vdr: [15022] transfer thread ended (pid=14866, tid=15022) Dec 16 22:18:43 erin vdr: [14866] buffer stats: 49632 (2%) used Dec 16 22:18:43 erin vdr: [15025] osdteletext-receiver thread ended (pid=14866, tid=15025) Dec 16 22:18:43 erin vdr: [15026] transfer thread started (pid=14866, tid=15026) Dec 16 22:18:43 erin vdr: [15024] TS buffer on device 1 thread ended (pid=14866, tid=15024) Dec 16 22:18:43 erin vdr: [15023] buffer stats: 52828 (2%) used Dec 16 22:18:43 erin vdr: [15023] receiver on device 1 thread ended (pid=14866, tid=15023) Dec 16 22:18:43 erin vdr: [15027] receiver on device 1 thread started (pid=14866, tid=15027) Dec 16 22:18:43 erin vdr: [14866] buffer stats: 0 (0%) used Dec 16 22:18:43 erin vdr: [15028] TS buffer on device 1 thread started (pid=14866, tid=15028) Dec 16 22:18:43 erin vdr: [15029] osdteletext-receiver thread started (pid=14866, tid=15029) On 12/16/10 19:31, Simon Baxter wrote: >> Dec 16 17:58:55 erin vdr: [2756] switching to channel 42 >> Dec 16 17:58:55 erin vdr: [2884] transfer thread ended (pid=2756, >> tid=2884) >> Dec 16 17:58:55 erin vdr: [2756] buffer stats: 40232 (1%) used >> Dec 16 17:58:55 erin vdr: [2888] transfer thread started (pid=2756, >> tid=2888) >> Dec 16 17:58:55 erin vdr: [2887] osdteletext-receiver thread ended >> (pid=2756, tid=2887) >> Dec 16 17:58:55 erin vdr: [2756] buffer stats: 0 (0%) used >> Dec 16 17:58:55 erin vdr: [2889] osdteletext-receiver thread started >> (pid=2756, tid=2889) >> Dec 16 17:58:56 erin vdr: [2888] [xine..put] Detected video size 704x576 >> Dec 16 17:58:56 erin vdr: [2888] setting audio track to 1 (0) >> Dec 16 17:58:59 erin vdr: [2756] switching to channel 64 >> Dec 16 17:58:59 erin vdr: [2888] transfer thread ended (pid=2756, >> tid=2888) >> Dec 16 17:58:59 erin vdr: [2756] buffer stats: 75388 (3%) used >> Dec 16 17:58:59 erin vdr: [2889] osdteletext-receiver thread ended >> (pid=2756, tid=2889) >> Dec 16 17:58:59 erin vdr: [2890] transfer thread started (pid=2756, >> tid=2890) >> Dec 16 17:59:00 erin vdr: [2886] TS buffer on device 1 thread ended >> (pid=2756, tid=2886) >> Dec 16 17:59:00 erin vdr: [2885] buffer stats: 78960 (3%) used >> Dec 16 17:59:00 erin vdr: [2885] receiver on device 1 thread ended >> (pid=2756, tid=2885) >> Dec 16 17:59:00 erin vdr: [2891] receiver on device 1 thread started >> (pid=2756, tid=2891) >> Dec 16 17:59:00 erin vdr: [2756] buffer stats: 0 (0%) used >> Dec 16 17:59:00 erin vdr: [2756] creating directory >> /var/cache/osdteletext/T-8720-2213-32 >> Dec 16 17:59:00 erin vdr: [2893] TS buffer on device 1 thread started >> (pid=2756, tid=2893) >> Dec 16 17:59:00 erin vdr: [2892] osdteletext-receiver thread started >> (pid=2756, tid=2892) >> Dec 16 17:59:01 erin vdr: [2756] retuning due to modification of >> channel 64 >> Dec 16 17:59:01 erin vdr: [2756] switching to channel 64 >> Dec 16 17:59:01 erin vdr: [2890] transfer thread ended (pid=2756, >> tid=2890) >> Dec 16 17:59:01 erin vdr: [2756] buffer stats: 39480 (1%) used >> Dec 16 17:59:01 erin vdr: [2894] transfer thread started (pid=2756, >> tid=2894) >> Dec 16 17:59:04 erin vdr: [2756] switching to channel 42 >> >> >> any idea why the scrambled stream isn't being decoded? > > Have you tried turning on debugging in ci.c? > // Set these to 'true' for debug output: > static bool DumpTPDUDataTransfer = false; > static bool DebugProtocol = false; > static bool DumpPolls = false; > static bool DumpDateTime = false; > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)
Dec 16 17:58:55 erin vdr: [2756] switching to channel 42 Dec 16 17:58:55 erin vdr: [2884] transfer thread ended (pid=2756, tid=2884) Dec 16 17:58:55 erin vdr: [2756] buffer stats: 40232 (1%) used Dec 16 17:58:55 erin vdr: [2888] transfer thread started (pid=2756, tid=2888) Dec 16 17:58:55 erin vdr: [2887] osdteletext-receiver thread ended (pid=2756, tid=2887) Dec 16 17:58:55 erin vdr: [2756] buffer stats: 0 (0%) used Dec 16 17:58:55 erin vdr: [2889] osdteletext-receiver thread started (pid=2756, tid=2889) Dec 16 17:58:56 erin vdr: [2888] [xine..put] Detected video size 704x576 Dec 16 17:58:56 erin vdr: [2888] setting audio track to 1 (0) Dec 16 17:58:59 erin vdr: [2756] switching to channel 64 Dec 16 17:58:59 erin vdr: [2888] transfer thread ended (pid=2756, tid=2888) Dec 16 17:58:59 erin vdr: [2756] buffer stats: 75388 (3%) used Dec 16 17:58:59 erin vdr: [2889] osdteletext-receiver thread ended (pid=2756, tid=2889) Dec 16 17:58:59 erin vdr: [2890] transfer thread started (pid=2756, tid=2890) Dec 16 17:59:00 erin vdr: [2886] TS buffer on device 1 thread ended (pid=2756, tid=2886) Dec 16 17:59:00 erin vdr: [2885] buffer stats: 78960 (3%) used Dec 16 17:59:00 erin vdr: [2885] receiver on device 1 thread ended (pid=2756, tid=2885) Dec 16 17:59:00 erin vdr: [2891] receiver on device 1 thread started (pid=2756, tid=2891) Dec 16 17:59:00 erin vdr: [2756] buffer stats: 0 (0%) used Dec 16 17:59:00 erin vdr: [2756] creating directory /var/cache/osdteletext/T-8720-2213-32 Dec 16 17:59:00 erin vdr: [2893] TS buffer on device 1 thread started (pid=2756, tid=2893) Dec 16 17:59:00 erin vdr: [2892] osdteletext-receiver thread started (pid=2756, tid=2892) Dec 16 17:59:01 erin vdr: [2756] retuning due to modification of channel 64 Dec 16 17:59:01 erin vdr: [2756] switching to channel 64 Dec 16 17:59:01 erin vdr: [2890] transfer thread ended (pid=2756, tid=2890) Dec 16 17:59:01 erin vdr: [2756] buffer stats: 39480 (1%) used Dec 16 17:59:01 erin vdr: [2894] transfer thread started (pid=2756, tid=2894) Dec 16 17:59:04 erin vdr: [2756] switching to channel 42 any idea why the scrambled stream isn't being decoded? Have you tried turning on debugging in ci.c? // Set these to 'true' for debug output: static bool DumpTPDUDataTransfer = false; static bool DebugProtocol = false; static bool DumpPolls = false; static bool DumpDateTime = false; ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
