Re: [vdr] Can not view DVB-S2 channels
As far as Igor's confirmation on "channel not available" I get this message only on DVB-S2 encrypted channels. I dont get it on encrypted DVB-S channels. As far as Reinhard's suggestion for the Initial channel (to tune for a few minutes before the card actually tunes), I could not get a sustained lock. It locked after about 10 minutes, it gave me TS stream errors for a few seconds and then it lost lock. I have the feeling that the channel is not available at my location/dish installation. Thank you Vangelis Igor wrote: > So, I have checked on my VDR 170 your issue. I can confirm that on encrypted > dvb/s dvb/s2 channels I receive the message "Channal not available" > > But you can fix it easy :) > > Go to Menu - Setup - Update channels - NO > after that go to the channels edit (red button) - change CA field from > encrypted to Free to Air > > Igor > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
So, I have checked on my VDR 170 your issue. I can confirm that on encrypted dvb/s dvb/s2 channels I receive the message "Channal not available" But you can fix it easy :) Go to Menu - Setup - Update channels - NO after that go to the channels edit (red button) - change CA field from encrypted to Free to Air Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
Hi, Vangelis Nonas schrieb: > When I switch to Initial channel I dont get the channel not available > message, however I dont get a picture as well. I believe that this > channel is not receivable, at least not at my location. Following is my > log when starting vdr with BBC World, then switching to Initial, then > back to BBC World (using -l 3): Well, I forgot to mention that the SkyStar HD (TT3200) driver still has an issue regarding tuning this channel. It may take up to several minutes until it successfully tunes to this channel (you'll see several messages like 'frontend 0 timed out while tuning to channel 1860, tp 111449'). BTW: Where do these PMT-SWITCH messages come from? OT: check your LANG and LC_... environment variables. Set LANG to one entry among the list which locale -a outputs and check the values of the other variables by typing locale In case an LC_... variable is not set explicitly, the locale command will print it's default value derived from other variables like LANG, so there is no need to set them unless you want some of them to be different from their default values. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED] ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
When I switch to Initial channel I dont get the channel not available message, however I dont get a picture as well. I believe that this channel is not receivable, at least not at my location. Following is my log when starting vdr with BBC World, then switching to Initial, then back to BBC World (using -l 3): May 10 19:42:07 vagoshome vdr: [5296] cTimeMs: not using monotonic clock - resolution is too bad (0 s 1 000 ns) May 10 19:42:07 vagoshome vdr: [5296] VDR version 1.7.0 started May 10 19:42:07 vagoshome vdr: [5296] codeset is 'ANSI_X3.4-1968' - unknown May 10 19:42:07 vagoshome vdr: [5296] found 0 locales in ./locale May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'deu,ger' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'slv,slo' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'ita' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'dut,nla,nld' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'por' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'fra,fre' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'nor' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'fin,smi' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'pol' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'esl,spa' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'ell,gre' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'sve,swe' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'rom,rum' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'hun' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'cat,cln' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'rus' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'hrv' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'est' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'dan' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'cze,ces' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'tur' May 10 19:42:07 vagoshome vdr: [5296] no locale for language code 'ukr' May 10 19:42:07 vagoshome vdr: [5296] loading plugin: ./PLUGINS/lib/libvdr-xine.so.1.7.0 May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/setup.conf May 10 19:42:07 vagoshome vdr: [5296] ERROR: unknown config parameter: MenuButtonCloses = 0 May 10 19:42:07 vagoshome vdr: [5296] unknown locale: '0' May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/sources.conf May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/diseqc.conf May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/channels.conf May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/timers.conf May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/svdrphosts.conf May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/remote.conf May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/keymacros.conf May 10 19:42:07 vagoshome vdr: [5296] reading EPG data from /video/epg.data May 10 19:42:07 vagoshome vdr: [5298] video directory scanner thread started (pid=5296, tid=5298) May 10 19:42:07 vagoshome vdr: [5296] probing /dev/dvb/adapter0/frontend0 May 10 19:42:07 vagoshome vdr: [5298] video directory scanner thread ended (pid=5296, tid=5298) May 10 19:42:07 vagoshome vdr: [5296] device 1 provides: DVBS DSS DVBS2 May 10 19:42:07 vagoshome vdr: [5297] video directory scanner thread started (pid=5296, tid=5297) May 10 19:42:07 vagoshome vdr: [5296] found 1 video device May 10 19:42:07 vagoshome vdr: [5297] video directory scanner thread ended (pid=5296, tid=5297) May 10 19:42:07 vagoshome vdr: [5296] initializing plugin: xine (0.8.2): Software based playback using xine May 10 19:42:07 vagoshome vdr: [5296] setting primary device to 2 May 10 19:42:07 vagoshome vdr: [5296] assuming manual start of VDR May 10 19:42:07 vagoshome vdr: [5296] SVDRP listening on port 2001 May 10 19:42:07 vagoshome vdr: [5296] setting current skin to "sttng" May 10 19:42:07 vagoshome vdr: [5296] loading /home/vagos/vdr-1.4.7/video/themes/sttng-default.theme May 10 19:42:07 vagoshome vdr: [5296] starting plugin: xine May 10 19:42:07 vagoshome vdr: [5299] tuner on device 1 thread started (pid=5296, tid=5299) May 10 19:42:07 vagoshome vdr: [5300] section handler thread started (pid=5296, tid=5300) May 10 19:42:07 vagoshome vdr: [5301] XineRemote control thread started (pid=5296, tid=5301) May 10 19:42:07 vagoshome vdr: [5301] Entering cXineRemote thread May 10 19:42:07 vagoshome vdr: [5296] ERROR: remote control XineRemote not ready! May 10 19:42:07 vagoshome vdr: [5296] remote control KBD - keys known May 10 19:42:07 vagoshome vdr: [5296] switching to channel 299 May 10
Re: [vdr] Can not view DVB-S2 channels
Hi, can you try this FTA channel, which broadcasts MPEG2 via DVB-S2 at Hotbird 13.0 E: Initial;ITI:11449:hC23M5O35S1:S13.0E:27500:519:0:0:0:15100:318:1300:0 BTW: your syslog excerpt didn't show messages like May 10 18:04:03 video vdr: [6165] cVideoRepacker: switching to MPEG1/2 mode just May 10 18:04:03 video vdr: [6165] cVideoRepacker: operating in MPEG1/2 mode so I assume you didn't specify -l 3 on VDR's command line, or debug messages are logged into a different file by syslog. Please try to provide those log lines too. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED] ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
This is my log from vdr-1.7.0 changing to HD Suisse (1853) then to Sky Sport HD 1 (1854) and then back to HD Suisse: May 10 18:49:12 vagoshome vdr: [4815] receiver on device 1 thread started (pid=4774, tid=4815) May 10 18:49:12 vagoshome vdr: [4816] TS buffer on device 1 thread started (pid=4774, tid=4816) May 10 18:49:13 vagoshome vdr: [4814] cVideoRepacker: operating in H.264 mode May 10 18:49:13 vagoshome vdr: [4774] retuning due to modification of channel 1853 May 10 18:49:13 vagoshome vdr: [4774] switching to channel 1853 May 10 18:49:13 vagoshome vdr: [4814] transfer thread ended (pid=4774, tid=4814) May 10 18:49:13 vagoshome vdr: [4774] buffer stats: 253048 (12%) used May 10 18:49:13 vagoshome vdr: [4774] PMT-SWITCH Device: '0' Channel: '1853' SID '990' May 10 18:49:13 vagoshome vdr: [4774] /dev/dvb/adapter0/demux0 May 10 18:49:13 vagoshome vdr: [4816] TS buffer on device 1 thread ended (pid=4774, tid=4816) May 10 18:49:13 vagoshome vdr: [4815] buffer stats: 178412 (8%) used May 10 18:49:13 vagoshome vdr: [4815] receiver on device 1 thread ended (pid=4774, tid=4815) May 10 18:49:13 vagoshome vdr: [4819] transfer thread started (pid=4774, tid=4819) May 10 18:49:13 vagoshome vdr: [4820] receiver on device 1 thread started (pid=4774, tid=4820) May 10 18:49:13 vagoshome vdr: [4821] TS buffer on device 1 thread started (pid=4774, tid=4821) May 10 18:49:14 vagoshome vdr: [4819] cVideoRepacker: operating in H.264 mode May 10 18:49:23 vagoshome vdr: [4774] switching to channel 1854 May 10 18:49:23 vagoshome vdr: [4819] transfer thread ended (pid=4774, tid=4819) May 10 18:49:23 vagoshome vdr: [4774] buffer stats: 331256 (15%) used May 10 18:49:23 vagoshome vdr: [4774] info: Channel not available! May 10 18:49:23 vagoshome vdr: [4821] TS buffer on device 1 thread ended (pid=4774, tid=4821) May 10 18:49:23 vagoshome vdr: [4820] buffer stats: 254552 (12%) used May 10 18:49:23 vagoshome vdr: [4820] receiver on device 1 thread ended (pid=4774, tid=4820) May 10 18:49:27 vagoshome vdr: [4774] switching to channel 1853 May 10 18:49:27 vagoshome vdr: [4774] PMT-SWITCH Device: '0' Channel: '1853' SID '990' May 10 18:49:27 vagoshome vdr: [4774] /dev/dvb/adapter0/demux0 May 10 18:49:27 vagoshome vdr: [4824] transfer thread started (pid=4774, tid=4824) May 10 18:49:27 vagoshome vdr: [4825] receiver on device 1 thread started (pid=4774, tid=4825) May 10 18:49:27 vagoshome vdr: [4826] TS buffer on device 1 thread started (pid=4774, tid=4826) May 10 18:49:27 vagoshome vdr: [4824] cVideoRepacker: operating in H.264 mode Vangelis Nonas wrote: > My multiproto version is not the latest, it is changeset 7205 dated a > couple of months ago. My modified szap is dated from that date also, but > it does not compile with multiproto plus. I cant find the exact links I > downloaded multiproto and modified szap but they were mentioned on the > linux-dvb mailing list. > > As fas as changing encrypted flag, vpid, ppid and dpid, can you please > give me an example, what I have to change in the following line: > > Next > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 > > Following is the log from vdr-1.5.14 with h264 patch and multiproto. If > you want log from vdr-1.7.0 I'll send. > Channel 1854 is HD Suisse and channel 1855 is Sky Sport HD 1. > > May 10 18:18:03 vagoshome vdr: [5996] cVideoRepacker: operating in H.264 > mode > May 10 18:18:13 vagoshome vdr: [5957] switching to channel 1854 > May 10 18:18:13 vagoshome vdr: [5996] transfer thread ended (pid=5957, > tid=5996) > May 10 18:18:13 vagoshome vdr: [5957] buffer stats: 228984 (10%) used > May 10 18:18:13 vagoshome vdr: [5957] info: Channel not available! > May 10 18:18:13 vagoshome vdr: [5999] TS buffer on device 1 thread ended > (pid=5957, tid=5999) > May 10 18:18:13 vagoshome vdr: [5998] buffer stats: 203040 (9%) used > May 10 18:18:13 vagoshome vdr: [5998] receiver on device 1 thread ended > (pid=5957, tid=5998) > May 10 18:18:15 vagoshome vdr: [5957] switching to channel 1853 > May 10 18:18:15 vagoshome vdr: [5957] PMT-SWITCH Device: '0' Channel: > '1853' SID '990' > May 10 18:18:15 vagoshome vdr: [5957] /dev/dvb/adapter0/demux0 > May 10 18:18:16 vagoshome vdr: [6002] transfer thread started (pid=5957, > tid=6002) > May 10 18:18:16 vagoshome vdr: [6003] receiver on device 1 thread > started (pid=5957, tid=6003) > May 10 18:18:16 vagoshome vdr: [6004] TS buffer on device 1 thread > started (pid=5957, tid=6004) > > > Igor wrote: > >>> As far as trying vdr with clear DVB-S2 channels, unfortunately it is not >>> possible in my case since I only have access to Hotbird, which I think >>> has no clear DVB-S2 channels. >>> >>> >> yes, you are right - on Hotbird the open dvb-s2 channels absent >> http://www.lyngsat.com/hd/hotbird.html >> >> >> >> >>> As fas as changing encrypted flag, vpid, ppid and dpid, can you please >>> give me an example, what I have to change in
Re: [vdr] Can not view DVB-S2 channels
My multiproto version is not the latest, it is changeset 7205 dated a couple of months ago. My modified szap is dated from that date also, but it does not compile with multiproto plus. I cant find the exact links I downloaded multiproto and modified szap but they were mentioned on the linux-dvb mailing list. As fas as changing encrypted flag, vpid, ppid and dpid, can you please give me an example, what I have to change in the following line: Next HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 Following is the log from vdr-1.5.14 with h264 patch and multiproto. If you want log from vdr-1.7.0 I'll send. Channel 1854 is HD Suisse and channel 1855 is Sky Sport HD 1. May 10 18:18:03 vagoshome vdr: [5996] cVideoRepacker: operating in H.264 mode May 10 18:18:13 vagoshome vdr: [5957] switching to channel 1854 May 10 18:18:13 vagoshome vdr: [5996] transfer thread ended (pid=5957, tid=5996) May 10 18:18:13 vagoshome vdr: [5957] buffer stats: 228984 (10%) used May 10 18:18:13 vagoshome vdr: [5957] info: Channel not available! May 10 18:18:13 vagoshome vdr: [5999] TS buffer on device 1 thread ended (pid=5957, tid=5999) May 10 18:18:13 vagoshome vdr: [5998] buffer stats: 203040 (9%) used May 10 18:18:13 vagoshome vdr: [5998] receiver on device 1 thread ended (pid=5957, tid=5998) May 10 18:18:15 vagoshome vdr: [5957] switching to channel 1853 May 10 18:18:15 vagoshome vdr: [5957] PMT-SWITCH Device: '0' Channel: '1853' SID '990' May 10 18:18:15 vagoshome vdr: [5957] /dev/dvb/adapter0/demux0 May 10 18:18:16 vagoshome vdr: [6002] transfer thread started (pid=5957, tid=6002) May 10 18:18:16 vagoshome vdr: [6003] receiver on device 1 thread started (pid=5957, tid=6003) May 10 18:18:16 vagoshome vdr: [6004] TS buffer on device 1 thread started (pid=5957, tid=6004) Igor wrote: >> As far as trying vdr with clear DVB-S2 channels, unfortunately it is not >> possible in my case since I only have access to Hotbird, which I think >> has no clear DVB-S2 channels. >> > > yes, you are right - on Hotbird the open dvb-s2 channels absent > http://www.lyngsat.com/hd/hotbird.html > > > >> As fas as changing encrypted flag, vpid, ppid and dpid, can you please >> give me an example, what I have to change in the following line: >> >> Next >> HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 >> >> >> >> Finally, I have to mention that using multiproto (not multiproto plus) >> and modified szap, I can tune to Next HD and get a lock (of course I can >> not watch the channel, I just get the message from modified szap that it >> has lock). >> > > which multipro's version and szap do you use ? where from did you get szap ? > > >> Modified szap does not work at all with multiproto plus. >> > > it's strange. May be the version of multiproto_plus and multiproto is > different ? > > >> Moreover, using multiproto (not multiproto plus) and vdr-1.5.14 (with >> h264 patch) or vdr-1.5.12 (with dvb-s2 + h264 patch) I have exactly the >> same behaviour with vdr-1.7.0 and multiproto plus : channel not >> avaialble for all DVB-S2 channels. >> > > what about the logs ? could you see un /var/syslog > > Igor > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
> As far as trying vdr with clear DVB-S2 channels, unfortunately it is not > possible in my case since I only have access to Hotbird, which I think > has no clear DVB-S2 channels. yes, you are right - on Hotbird the open dvb-s2 channels absent http://www.lyngsat.com/hd/hotbird.html > As fas as changing encrypted flag, vpid, ppid and dpid, can you please > give me an example, what I have to change in the following line: > > Next > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 > > > > Finally, I have to mention that using multiproto (not multiproto plus) > and modified szap, I can tune to Next HD and get a lock (of course I can > not watch the channel, I just get the message from modified szap that it > has lock). which multipro's version and szap do you use ? where from did you get szap ? > Modified szap does not work at all with multiproto plus. it's strange. May be the version of multiproto_plus and multiproto is different ? > Moreover, using multiproto (not multiproto plus) and vdr-1.5.14 (with > h264 patch) or vdr-1.5.12 (with dvb-s2 + h264 patch) I have exactly the > same behaviour with vdr-1.7.0 and multiproto plus : channel not > avaialble for all DVB-S2 channels. what about the logs ? could you see un /var/syslog Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
As far as trying vdr with clear DVB-S2 channels, unfortunately it is not possible in my case since I only have access to Hotbird, which I think has no clear DVB-S2 channels. As fas as changing encrypted flag, vpid, ppid and dpid, can you please give me an example, what I have to change in the following line: Next HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 Finally, I have to mention that using multiproto (not multiproto plus) and modified szap, I can tune to Next HD and get a lock (of course I can not watch the channel, I just get the message from modified szap that it has lock). Modified szap does not work at all with multiproto plus. Moreover, using multiproto (not multiproto plus) and vdr-1.5.14 (with h264 patch) or vdr-1.5.12 (with dvb-s2 + h264 patch) I have exactly the same behaviour with vdr-1.7.0 and multiproto plus : channel not avaialble for all DVB-S2 channels. Thank you Vangelis Igor wrote: >> Vangelis Nonas wrote: >> >>> I dont think that this is the case because with encrypted DVB-S channels >>> I get a blank screen but NOT the message "channel not available". I get >>> this message ONLY on DVB-S2 channels. I can perfectly watch HD Suisse >>> which is DVB-S. >>> >> with vdr 1.7 and the patch it s possible to say that there is something >> if you remove the encrypted flag, and vpid, ppid and dpid they will >> reappear when you switch to that channel - its there, maybe they are >> not broadcasting at that moment >> > > I suppose Vangelis Nonas didn't remove any encrypted flags and pids. For you > information - what's new in VDR 1.6.0 > > > The changes since version 1.5.13: > - Removed switching to the next higher or lower channel if the current channel > is not available, in order to allow staying on an encrypted channel that takes > a while for the CAM to start decrypting. > = > > > may be in 1.7.0 it was broken for dvb-s2 encrypted channels > > > Igor > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
> Vangelis Nonas wrote: > > I dont think that this is the case because with encrypted DVB-S channels > > I get a blank screen but NOT the message "channel not available". I get > > this message ONLY on DVB-S2 channels. I can perfectly watch HD Suisse > > which is DVB-S. > > with vdr 1.7 and the patch it s possible to say that there is something > if you remove the encrypted flag, and vpid, ppid and dpid they will > reappear when you switch to that channel - its there, maybe they are > not broadcasting at that moment I suppose Vangelis Nonas didn't remove any encrypted flags and pids. For you information - what's new in VDR 1.6.0 The changes since version 1.5.13: - Removed switching to the next higher or lower channel if the current channel is not available, in order to allow staying on an encrypted channel that takes a while for the CAM to start decrypting. = may be in 1.7.0 it was broken for dvb-s2 encrypted channels Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
Vangelis Nonas wrote: > I dont think that this is the case because with encrypted DVB-S channels > I get a blank screen but NOT the message "channel not available". I get > this message ONLY on DVB-S2 channels. I can perfectly watch HD Suisse > which is DVB-S. with vdr 1.7 and the patch it´s possible to say that there is something if you remove the encrypted flag, and vpid, ppid and dpid they will reappear when you switch to that channel - its there, maybe they are not broadcasting at that moment ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
no need the additional patches for vdr 170 except vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2 , but you already have installed it. could you check VDR's behaviour on open dvb-s2 channels , please Igor -Original Message- From: Vangelis Nonas <[EMAIL PROTECTED]> To: VDR Mailing List Date: Fri, 09 May 2008 22:46:04 +0000 Subject: Re: [vdr] Can not view DVB-S2 channels > > I dont think that this is the case because with encrypted DVB-S channels > I get a blank screen but NOT the message "channel not available". I get > this message ONLY on DVB-S2 channels. I can perfectly watch HD Suisse > which is DVB-S. > > I think I am missing a patch. I think there must be a patch that "tells" > vdr that these channels are DVB-S2 and instructs the card accordingly to > switch to dvb-s2 "mode". > > Basically I use vdr-1.7.0 with this patch: > http://www.linuxtv.org/pipermail/vdr/attachments/20080413/1054bcfb/attachment-0001.bin > and vdr-xine as described here: > http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine > > Am I missing a patch or something else? > > > > Igor wrote: > > the channels in your channels.conf are encrypted , thta's why vdr couldn't > > open them > > > > -Original Message- > > From: Vangelis Nonas <[EMAIL PROTECTED]> > > To: VDR Mailing List <[EMAIL PROTECTED] org> > > Date: Fri, 09 May 2008 20:52:46 + > > Subject: Re: [vdr] Can not view DVB-S2 channels > > > > > >> Nobody has this problem? Any suggestions? > >> > >> Thanks > >> Vagelis > >> > >> > >> > >> NONAS EUAGGELOS wrote: > >> > >>> Dear All, > >>> > >>> I have a skystar hd and I am using vdr 1.7.0 with the h264 patch and xine > >>> for output device as described here: > >>> > >>> http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine > >>> > >>> The only channel I am able to watch is HD Suisse. I can not watch any > >>> other dvb-s2 or h264 channel. When I zap to > >>> > > it I get: channel not available. > > > >>> These are some example channels from chanels.conf that do NOT work: > >>> > >>> SKY Sport HD > >>> 1;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10164+164:0;416=ita,417= > >>> eng:0:919,93B:11020:64511:6400:0 > >>> Next > >>> HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:9 > >>> 19,93B:11030:64511:6400:0 > >>> SKY Cinema > >>> HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10161+161:0;404=ita,405=e > >>> ng:0:919,93B:11031:64511:6400:0 > >>> NationalGeo > >>> HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10163+163:0;412=ita,413= > >>> eng:0:919,93B:11032:64511:6400:0 > >>> SKY Sport HD > >>> 2;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10165+165:0;420=eng,421= > >>> ita:0:919,93B:11033:64511:6400:0 > >>> > >>> > >>> I have copied them from the mailing list: > >>> http://www.mail-archive.com/vdr@linuxtv.org/msg04678.html > >>> > >>> > >>> Any help / ideas would be appreciated. > >>> > >>> Regards > >>> Vagelis > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
I dont think that this is the case because with encrypted DVB-S channels I get a blank screen but NOT the message "channel not available". I get this message ONLY on DVB-S2 channels. I can perfectly watch HD Suisse which is DVB-S. I think I am missing a patch. I think there must be a patch that "tells" vdr that these channels are DVB-S2 and instructs the card accordingly to switch to dvb-s2 "mode". Basically I use vdr-1.7.0 with this patch: http://www.linuxtv.org/pipermail/vdr/attachments/20080413/1054bcfb/attachment-0001.bin and vdr-xine as described here: http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine Am I missing a patch or something else? Igor wrote: > the channels in your channels.conf are encrypted , thta's why vdr couldn't > open them > > -Original Message- > From: Vangelis Nonas <[EMAIL PROTECTED]> > To: VDR Mailing List <[EMAIL PROTECTED] org> > Date: Fri, 09 May 2008 20:52:46 + > Subject: Re: [vdr] Can not view DVB-S2 channels > > >> Nobody has this problem? Any suggestions? >> >> Thanks >> Vagelis >> >> >> >> NONAS EUAGGELOS wrote: >> >>> Dear All, >>> >>> I have a skystar hd and I am using vdr 1.7.0 with the h264 patch and xine >>> for output device as described here: >>> >>> http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine >>> >>> The only channel I am able to watch is HD Suisse. I can not watch any other >>> dvb-s2 or h264 channel. When I zap to >>> > it I get: channel not available. > >>> These are some example channels from chanels.conf that do NOT work: >>> >>> SKY Sport HD >>> 1;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10164+164:0;416=ita,417= >>> eng:0:919,93B:11020:64511:6400:0 >>> Next >>> HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:9 >>> 19,93B:11030:64511:6400:0 >>> SKY Cinema >>> HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10161+161:0;404=ita,405=e >>> ng:0:919,93B:11031:64511:6400:0 >>> NationalGeo >>> HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10163+163:0;412=ita,413= >>> eng:0:919,93B:11032:64511:6400:0 >>> SKY Sport HD >>> 2;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10165+165:0;420=eng,421= >>> ita:0:919,93B:11033:64511:6400:0 >>> >>> >>> I have copied them from the mailing list: >>> http://www.mail-archive.com/vdr@linuxtv.org/msg04678.html >>> >>> >>> Any help / ideas would be appreciated. >>> >>> Regards >>> Vagelis >>> >>> >>> ___ >>> vdr mailing list >>> vdr@linuxtv.org >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >>> >>> . >>> >>> >>> >> ___ >> vdr mailing list >> vdr@linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >> >> > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
the channels in your channels.conf are encrypted , thta's why vdr couldn't open them -Original Message- From: Vangelis Nonas <[EMAIL PROTECTED]> To: VDR Mailing List <[EMAIL PROTECTED] org> Date: Fri, 09 May 2008 20:52:46 +0000 Subject: Re: [vdr] Can not view DVB-S2 channels > > Nobody has this problem? Any suggestions? > > Thanks > Vagelis > > > > NONAS EUAGGELOS wrote: > > Dear All, > > > > I have a skystar hd and I am using vdr 1.7.0 with the h264 patch and xine > > for output device as described here: > > > > http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine > > > > The only channel I am able to watch is HD Suisse. I can not watch any other > > dvb-s2 or h264 channel. When I zap to it I get: channel not available. > > > > These are some example channels from chanels.conf that do NOT work: > > > > SKY Sport HD > > 1;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10164+164:0;416=ita,417= > > eng:0:919,93B:11020:64511:6400:0 > > Next > > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:9 > > 19,93B:11030:64511:6400:0 > > SKY Cinema > > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10161+161:0;404=ita,405=e > > ng:0:919,93B:11031:64511:6400:0 > > NationalGeo > > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10163+163:0;412=ita,413= > > eng:0:919,93B:11032:64511:6400:0 > > SKY Sport HD > > 2;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10165+165:0;420=eng,421= > > ita:0:919,93B:11033:64511:6400:0 > > > > > > I have copied them from the mailing list: > > http://www.mail-archive.com/vdr@linuxtv.org/msg04678.html > > > > > > Any help / ideas would be appreciated. > > > > Regards > > Vagelis > > > > > > ___ > > vdr mailing list > > vdr@linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > > . > > > > > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Can not view DVB-S2 channels
Nobody has this problem? Any suggestions? Thanks Vagelis NONAS EUAGGELOS wrote: > Dear All, > > I have a skystar hd and I am using vdr 1.7.0 with the h264 patch and xine for > output device as described here: > > http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine > > The only channel I am able to watch is HD Suisse. I can not watch any other > dvb-s2 or h264 channel. When I zap to it I get: channel not available. > > These are some example channels from chanels.conf that do NOT work: > > SKY Sport HD > 1;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10164+164:0;416=ita,417= > eng:0:919,93B:11020:64511:6400:0 > Next > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10160+160:0;400=ita,401=eng:0:9 > 19,93B:11030:64511:6400:0 > SKY Cinema > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10161+161:0;404=ita,405=e > ng:0:919,93B:11031:64511:6400:0 > NationalGeo > HD;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10163+163:0;412=ita,413= > eng:0:919,93B:11032:64511:6400:0 > SKY Sport HD > 2;SkyItalia:11996:vC23M5S1Z35:S13.0E:27500:10165+165:0;420=eng,421= > ita:0:919,93B:11033:64511:6400:0 > > > I have copied them from the mailing list: > http://www.mail-archive.com/vdr@linuxtv.org/msg04678.html > > > Any help / ideas would be appreciated. > > Regards > Vagelis > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > . > > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr