Re: [vdsm] Need help on fixing VDSM node non-operational error
On Wed, Jun 19, 2013 at 07:59:26AM -0400, Timothy Asir Jeyasingh wrote: > Hi Dan, > > Thank you for the quick fix and reply! > > The output of `brctl show` as follows: > > bridge name bridge id STP enabled interfaces > ovirtmgmt 8000.0025907c2c7a no eth0 > eth2 > > It goes away after doing 'brctl delif ovirtmgmt eth0' manually. > I will let you know if we could reproduce this issue again. If you have historical logs, it might be interesting to tell when this awkward situation (ovirtmgmt bridging two real interfaces) was introduced, and why. Could you find the first occasion where both interfaces were attached to the bridge? ___ vdsm-devel mailing list vdsm-devel@lists.fedorahosted.org https://lists.fedorahosted.org/mailman/listinfo/vdsm-devel
Re: [vdsm] Need help on fixing VDSM node non-operational error
Hi Dan,
Thank you for the quick fix and reply!
The output of `brctl show` as follows:
bridge name bridge id STP enabled interfaces
ovirtmgmt 8000.0025907c2c7a no eth0
eth2
It goes away after doing 'brctl delif ovirtmgmt eth0' manually.
I will let you know if we could reproduce this issue again.
Thanks and Regards,
Tim
- Original Message -
> From: "Dan Kenigsberg"
> To: "Timothy Asir Jeyasingh"
> Cc: vdsm-devel@lists.fedorahosted.org
> Sent: Wednesday, June 19, 2013 4:03:20 PM
> Subject: Re: [vdsm] Need help on fixing VDSM node non-operational error
>
> On Wed, Jun 19, 2013 at 05:51:52AM -0400, Timothy Asir Jeyasingh wrote:
> > Hi All,
> >
> > Currently I am facing some issues while adding a node to an engine.
> > Host comes up initially. Then goes to Non-operational state. On trying to
> > activate the host, it again comes up. Then goes to Non-operational state
> > again and so on.
> >
> > The following message is seen in the engine Events log multiple times -
> > Bridged network ovirtmgmt is attached to multiple interfaces: eth2,eth0 on
> > Host ...
> >
> > The following is seen in the engine logs -
> > 2013-06-06 20:52:23,003 INFO
> > [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
> > (DefaultQuartzScheduler_Worker-16) Host '...' moved to Non-Operational
> > state because interface/s 'eth0, ' are down which needed by network/s
> > 'ovirtmgmt, ' in the current cluster
> >
> > Additional info:
> > The host is a physical machine. The contents of the file
> > /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt -
> >
> > # cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
> > DEVICE=ovirtmgmt
> > TYPE=Bridge
> > ONBOOT=yes
> > DELAY=0
> > BOOTPROTO=dhcp
> > NM_CONTROLLED=no
> >
> > The contents of /etc/sysconfig/network-scripts/ifcfg-eth2
> >
> > # cat /etc/sysconfig/network-scripts/ifcfg-eth2
> > DEVICE="eth2"
> > BRIDGE="ovirtmgmt"
> > BOOTPROTO="dhcp"
> > HWADDR="00:25:90:93:62:02"
> > IPV6INIT="yes"
> > IPV6_AUTOCONF="yes"
> > NM_CONTROLLED="yes"
> > ONBOOT="yes"
> > TYPE="Ethernet"
> >
> > The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 -
> >
> > # cat /etc/sysconfig/network-scripts/ifcfg-eth0
> > DEVICE="eth0"
> > HWADDR="00:25:90:7C:2C:7A"
> > NM_CONTROLLED="yes"
> > ONBOOT="yes"
> >
> >
> > Can someone give some suggestion for this issue!
>
> I've had a couple of questions on
> https://bugzilla.redhat.com/show_bug.cgi?id=971477#c7
>
> What does `brctl show` have on your faulty host? (just to rule out that vdsm
> is lying about the ovirtmgmt being connected to two nics)
>
> {'ovirtmgmt': {'addr': '10.70.36.44', 'cfg': {'DELAY': '0', 'NM_CONTROLLED':
> 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge',
> 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.254.0', 'stp': 'off',
> 'ports': ['eth0', 'eth2']}}
>
> Does it reproduce on any other system?
> Does it go away once you manually
>
> brctl delif ovirtmgmt eth0
>
___
vdsm-devel mailing list
vdsm-devel@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/vdsm-devel
Re: [vdsm] Need help on fixing VDSM node non-operational error
On Wed, Jun 19, 2013 at 05:51:52AM -0400, Timothy Asir Jeyasingh wrote:
> Hi All,
>
> Currently I am facing some issues while adding a node to an engine.
> Host comes up initially. Then goes to Non-operational state. On trying to
> activate the host, it again comes up. Then goes to Non-operational state
> again and so on.
>
> The following message is seen in the engine Events log multiple times -
> Bridged network ovirtmgmt is attached to multiple interfaces: eth2,eth0 on
> Host ...
>
> The following is seen in the engine logs -
> 2013-06-06 20:52:23,003 INFO
> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
> (DefaultQuartzScheduler_Worker-16) Host '...' moved to Non-Operational state
> because interface/s 'eth0, ' are down which needed by network/s 'ovirtmgmt, '
> in the current cluster
>
> Additional info:
> The host is a physical machine. The contents of the file
> /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt -
>
> # cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
> DEVICE=ovirtmgmt
> TYPE=Bridge
> ONBOOT=yes
> DELAY=0
> BOOTPROTO=dhcp
> NM_CONTROLLED=no
>
> The contents of /etc/sysconfig/network-scripts/ifcfg-eth2
>
> # cat /etc/sysconfig/network-scripts/ifcfg-eth2
> DEVICE="eth2"
> BRIDGE="ovirtmgmt"
> BOOTPROTO="dhcp"
> HWADDR="00:25:90:93:62:02"
> IPV6INIT="yes"
> IPV6_AUTOCONF="yes"
> NM_CONTROLLED="yes"
> ONBOOT="yes"
> TYPE="Ethernet"
>
> The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 -
>
> # cat /etc/sysconfig/network-scripts/ifcfg-eth0
> DEVICE="eth0"
> HWADDR="00:25:90:7C:2C:7A"
> NM_CONTROLLED="yes"
> ONBOOT="yes"
>
>
> Can someone give some suggestion for this issue!
I've had a couple of questions on
https://bugzilla.redhat.com/show_bug.cgi?id=971477#c7
What does `brctl show` have on your faulty host? (just to rule out that vdsm is
lying about the ovirtmgmt being connected to two nics)
{'ovirtmgmt': {'addr': '10.70.36.44', 'cfg': {'DELAY': '0', 'NM_CONTROLLED':
'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT':
'yes'}, 'mtu': '1500', 'netmask': '255.255.254.0', 'stp': 'off', 'ports':
['eth0', 'eth2']}}
Does it reproduce on any other system?
Does it go away once you manually
brctl delif ovirtmgmt eth0
___
vdsm-devel mailing list
vdsm-devel@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/vdsm-devel
