On Wed, Jun 19, 2013 at 05:51:52AM -0400, Timothy Asir Jeyasingh wrote: > Hi All, > > Currently I am facing some issues while adding a node to an engine. > Host comes up initially. Then goes to Non-operational state. On trying to > activate the host, it again comes up. Then goes to Non-operational state > again and so on. > > The following message is seen in the engine Events log multiple times - > Bridged network ovirtmgmt is attached to multiple interfaces: eth2,eth0 on > Host ... > > The following is seen in the engine logs - > 2013-06-06 20:52:23,003 INFO > [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] > (DefaultQuartzScheduler_Worker-16) Host '...' moved to Non-Operational state > because interface/s 'eth0, ' are down which needed by network/s 'ovirtmgmt, ' > in the current cluster > > Additional info: > The host is a physical machine. The contents of the file > /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt - > > # cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt > DEVICE=ovirtmgmt > TYPE=Bridge > ONBOOT=yes > DELAY=0 > BOOTPROTO=dhcp > NM_CONTROLLED=no > > The contents of /etc/sysconfig/network-scripts/ifcfg-eth2 > > # cat /etc/sysconfig/network-scripts/ifcfg-eth2 > DEVICE="eth2" > BRIDGE="ovirtmgmt" > BOOTPROTO="dhcp" > HWADDR="00:25:90:93:62:02" > IPV6INIT="yes" > IPV6_AUTOCONF="yes" > NM_CONTROLLED="yes" > ONBOOT="yes" > TYPE="Ethernet" > > The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 - > > # cat /etc/sysconfig/network-scripts/ifcfg-eth0 > DEVICE="eth0" > HWADDR="00:25:90:7C:2C:7A" > NM_CONTROLLED="yes" > ONBOOT="yes" > > > Can someone give some suggestion for this issue!
I've had a couple of questions on https://bugzilla.redhat.com/show_bug.cgi?id=971477#c7 What does `brctl show` have on your faulty host? (just to rule out that vdsm is lying about the ovirtmgmt being connected to two nics) {'ovirtmgmt': {'addr': '10.70.36.44', 'cfg': {'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.254.0', 'stp': 'off', 'ports': ['eth0', 'eth2']}} Does it reproduce on any other system? Does it go away once you manually brctl delif ovirtmgmt eth0 _______________________________________________ vdsm-devel mailing list vdsm-devel@lists.fedorahosted.org https://lists.fedorahosted.org/mailman/listinfo/vdsm-devel
