Same here, some example for QoS/Rate limiting would be nice to get started.
Thanks and Regards,
Raj
On Sat, Dec 29, 2018 at 9:39 AM carlito nueno wrote:
>
>
> I am looking for rate limiting (bandwidth/traffic shaping) as well.
>
>
> Vakili, Did you figure it out?
>
>
and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11810): https://lists.fd.io/g/vpp-dev/message/11810
Mute This Topic: https://lists.fd.io/mt/28903866/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp
Hi,
Just checking if there is movement on this!
Thanks and Regards,
Raj
On Thu, Dec 20, 2018 at 12:08 PM Raj via Lists.Fd.Io
wrote:
>
> Thanks a lot to both of you!
>
> Raj
>
> On Thu, Dec 20, 2018 at 6:17 AM Ni, Hongjun wrote:
> >
> > Hi Raj,
> >
> &g
am able to download at the full interface speed of
100.69.1.4
Any pointers to get this working?
Thanks and Regards,
Raj
On Tue, Jan 1, 2019 at 2:56 PM Raj via Lists.Fd.Io
wrote:
>
> Same here, some example for QoS/Rate limiting would be nice to get started.
>
> Thanks and Rega
On Thu, Jan 3, 2019 at 4:44 PM Damjan Marion wrote:
> From VPP perspective sample plugin might be good start, if you have
> any particular questions, drop email here and we will try to explain...
Thanks a lot. Will get back if there are questions.
Thanks and Regards
Hello Hongjun and Alp Arslan,
Just checking if there is any update on this patch.
with regards,
raj
On Thu, Dec 20, 2018 at 6:17 AM Ni, Hongjun wrote:
> Hi Raj,
>
> For the issue you mentioned, Alp Arslan in the To list will submit a patch to
> fix it.
>
> To Alp Arslan,
&g
Is such a configuration possible? How can I configure VPP for it? Is
there any incompatibility between NAT and Policer?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11963): https://lists.fd.io/g/vpp-dev/message/11963
s where to send
packet since you don't know at compile time whether policer is
configured on interface.".
Thanks and Regards,
Raj
On Mon, Jan 21, 2019 at 6:04 PM Matus Fabian -X (matfabia - PANTHEON
TECHNOLOGIES at Cisco) wrote:
>
> Hi,
>
> You can use ip4-policer-classify b
hcp-client-detect"),
};
Its just first time hacking on VPP code, so do let me know if this is
the right way or there is a better way.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11969): https://lists.fd.io/g/vpp-dev/mes
lusion was premature. I still do not quite
understand VNET_FEATURE_INIT to route the traffic the way I want. A
sample code fragment would be very helpful.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11971): https://lists.fd.io
CT_FALSE (proto0 == ~0))
{
if (nat_out2in_sm_unknown_proto (sm, b0, ip0, rx_fib_index0))
I hope the approach followed is the correct one, but I could not
figure out why the ASSERT is happening.
Thanks and Regards,
Raj
On Tue, Jan 22, 2019 at 8:10 PM Matus Fabian -X (matfabia -
ing if this patch is available or is there any other way to
get PPPoE working in latest version?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11676): https://lists.fd.io/g/vpp-dev/message/11676
Mute This Topic: https://lists.fd
a mask parameter and session
has a match parameter, what do they do?
The example shows how to configure policing for one IP address, what
needs to be done to configure it for another IP address or a network?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent
On Wed, Jan 9, 2019 at 4:18 PM Damjan Marion wrote:
>> On 9 Jan 2019, at 09:53, Raj wrote:
>> 1. static_always_inline void
>> vlib_buffer_enqueue_to_next (vlib_main_t * vm, vlib_node_runtime_t * node,
>>u32 * buffers,
rse operation?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11878): https://lists.fd.io/g/vpp-dev/message/11878
Mute This Topic: https://lists.fd.io/mt/28982509/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: ht
Thanks a lot to both of you!
Raj
On Thu, Dec 20, 2018 at 6:17 AM Ni, Hongjun wrote:
>
> Hi Raj,
>
> For the issue you mentioned, Alp Arslan in the To list will submit a patch to
> fix it.
>
> To Alp Arslan,
> Thank you for your great help!
>
> Thanks,
>
ot;,
"miss_next": "permit"
}
]
}
I can create a classify table like this, with skip_n_vectors as zero,
but with a longer mask and it works fine.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Onl
On Thu, Mar 28, 2019 at 4:38 PM Michal Cmarada -X (mcmarada - PANTHEON
TECHNOLOGIES at Cisco) wrote:
>
> Raj: If you have more data available after testing, please provide them here.
> Thanks
My observation is when I use skip of 1, cli works fine while RESTCONF do not.
Config using
load-balance, and packets are not hitting
ip4-my-node.
Do I have to make any other change apart from what I have already done
insert the ip4-my-node into the path?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12353):
.
stats { socket-name /run/vpp/stats.sock }
Should I have to do any thing else to get the sock file and possibly
enable SHM logging?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12443): https://lists.fd.io/g/vpp-dev/message
with problem reproduced. In the mean time,
if you like me to check any thing specific I can do it.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12442): https://lists.fd.io/g/vpp-dev/message/12442
Mute This Topic: https://li
put (heap, p);
->mspace_free (msp, object_header);
->ok_magic(fm)
->return (m->magic == mparams.magic); /* here it dumps */
Following is my gdb session transcript:
(gdb) bt
#0 0x75fd9f98 in ok_magic (m=0x13131313cdbec9ad) at
/h
in master/latest - automated
> anomaly detection - and the master/latest version will cheerfully work with
> event-logs from an 18.10 vpp image. So, I'd be tempted to pull master/latest
> and build it.
Will check out master and try.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Link
Hello all,
According to docs I can compile g2 using make g2-install. But in 18.10
sources I get this
[raj@vpp-dev-01 build-root (stable-1810)]$ make g2-install
Arch for platform 'native' is native
Finding source for g2
Package g2 not found with path /home/raj/vpp/build
__GI_abort () at abort.c:79
#2 0xc4c8 in os_panic () at /home/raj/vpp/src/vpp/vnet/main.c:335
#3 0x75d0125f in debugger () at /home/raj/vpp/src/vppinfra/error.c:84
#4 0x75d0169a in _clib_error (how_to_die=2,
function_name=0x0, line_number=0, fmt=0x7fffb4860d40 "%s:%d (%s
script can reliably produce the
crash.
Thanks and Regards,
Raj
vppset.sh
Description: application/shellscript
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12481): https://lists.fd.io/g/vpp-dev/message/12481
Mute This Topic: https://lists.fd
Hi,
Tested again in 18.10, same result.
Configuration:
sh version
vpp v18.10-22~g13f5dcf91 built by raj on vpp-dev-01 at Mon Mar 18 18:38:14
IST 2019
DBGvpp#
DBGvpp#
DBGvpp# set int state GigabitEthernet86/0/3 up
DBGvpp# set int ip address GigabitEthernet86/0/3 xxx.xx.223.14/29
DBGvpp# set
Will do that and report back.
Thanks and Regards,
Raj
On Mon, Mar 18, 2019 at 7:45 PM Neale Ranns (nranns)
wrote:
>
>
> Hi Raj,
>
>
>
> ABF, which is a feature that runs in the L3 path, has not (to my knowledge
> anyway) been tested with MACIP ACLs – this ACL type is
ely.
Thanks!
raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12582): https://lists.fd.io/g/vpp-dev/message/12582
Mute This Topic: https://lists.fd.io/mt/30439598/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/
ackets whose destination MAC is the same as the interface
MAC or bcast/mcast MAC. How should I go about fixing this? Would
turning off off this check for TAP interface work? Any better way to
achieve this result?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all message
ch will be accepted upstream. I am
not sure how to _correctly_ fix this, so that it will be accepted by
upstream. If some pointers are given I can submit a patch to get PPPoE
working correctly again in VPP.
Thanks and Regards,
Raj
On Tue, Mar 19, 2019 at 1:09 PM Raj via Lists.Fd.Io
wrote:
>
Another approach that can be used is to send all PPP/PPPoE control
packets encapsulated in NSH, and Control plane can process it and
return the packets to VPP which will decapsulate the NSH headers and
pass the packets on to PPPoE client.
Thanks and Regards,
Raj
On Mon, Mar 18, 2019 at 7:44 PM
Thanks Andrew for looking into it.
In the crash I sent, I missed adding ACL. But I was working with 18.10
previously and there I am sure I added ACL, but there was still some
thing amiss. I am now doing the testing once more in 18.10 and will
get back with result.
Thanks and Regards,
Raj
or a
sample conf for 18.10
Thanks and Regards,
Raj
On Wed, Mar 6, 2019 at 8:31 PM Ole Troan wrote:
>
> Hi Raj,
>
> statseg { … }
>
> There is a C API in vpp-api/client/stat_client.h you can use.
> Or a higher level Go, Python or C++ binding too.
>
> Cheers,
> Ole
>
automatically.
Also can I view events in real time, rather than saving in a file and
viewing it offline?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12557): https://lists.fd.io/g/vpp-dev/message/12557
Mute This Topic: https
commit/1edfba9a6394128ee5fad2b413e9e0a05972ef48
talks about these events.Do these events gets generated automatically?
Thanks and Regards,
Raj
> -Original Message-
> From: vpp-dev@lists.fd.io On Behalf Of Raj
> Sent: Friday, March 15, 2019 8:02 AM
> To: vpp-dev
> Subject: [vpp-dev] Enabling events
&
he above TODO related?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12615): https://lists.fd.io/g/vpp-dev/message/12615
Mute This Topic: https://lists.fd.io/mt/30706811/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe:
he correct fix for this
ASSERT failure, and if yes I am not sure how exactly it works.
Does adding the feature 'nat44-out2in' in the .runs_before of
'ip4-policer-classify' has a side effect of incrementing the value of
n_next_nodes? If not how adding the above patch resolve the Assert
failure?
W
bvppinfra.so.18.10
#14 0x7ffcc1a6b2d0 in ?? ()
#15 0x7f7b0a1e996e in vlib_unix_main (argc=2, argv=0x7ffcc1a6c5c8)
at /home//vpp/src/vlib/unix/main.c:676
#16 0x55d570fd6927 in main (argc=2, argv=0x7ffcc1a6c5c8) at
/home//vpp/src/vpp/vnet/main.c:264
Thanks and Regards,
Raj
On Wed, Jan 2
large amount of delay, so the buffers
> cannot be used to temporarily store the data.
If my understanding is correct, the comparison is between two packet
copy per packet and performance degradation due to bigger buffers. How
would they compare?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Lin
to next frame and
pending frame. I could not figure out what these are and for what they
are being used.
Thanks and Regards,
Raj
On Thu, Jan 31, 2019 at 9:31 PM Dave Barach (dbarach) wrote:
>
> In vlib – vpp’s basic vector library - frames comprise a single vector, a set
> of scalar
Thanks Florin!
Raj
On Fri, Feb 1, 2019 at 2:07 AM Florin Coras wrote:
>
> Hi Raj,
>
> Partly. Check “show buffers”
>
> Florin
>
> > On Jan 31, 2019, at 1:04 AM, Raj wrote:
> >
> > Hi Florin,
> >
> > On Wed, Jan 30, 2019 at 10:01 PM Florin
there is a statement vec_resize (nm->pending_frames,
32). In here, what is pending_frames and what is the significance of
number 32?
I know I have been asking too many questions over here and very
grateful to all who answer.
Thanks a lot!
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messa
On Mon, Feb 4, 2019 at 9:19 PM Dave Barach via Lists.Fd.Io
wrote:
> "use the Force and read the Source..."
Thanks :) Will do!
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12179): https://lists.fd.io/g/vpp-dev/messa
out the exact mechanism.
Thanks and Regards,
Raj
On Fri, Feb 1, 2019 at 8:21 PM Dave Barach (dbarach) wrote:
>
> Next frames are the physical manifestations of graph arcs. Pending frames are
> graph scheduler run-queue entries.
>
> -Original Message-
> From: v
is
not reporting ARP events, though ip-route-resolver-process is doing
so.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12812): https://lists.fd.io/g/vpp-dev/message/12812
Mute This Topic: https://lists.fd.io/mt/31223473/21656
Group
Thanks, I will cross check and get back.
Thanks and Regards,
Raj
On Fri, Mar 15, 2019 at 6:40 PM Dave Barach (dbarach) wrote:
>
> You're sure that links are up, ipv6 is enabled on the interfaces and all that
> good stuff, right?
>
> If "show ip6 neighbor" shows
.
When a block of IP address is allocated to a PPPoE client, how does
the routing work? How will VPP route the packets, ingress from north,
belonging to a network, to correct PPPoE encapsulation, including MAC
and PPPoE ID?
I guess I am missing some routing command here.
Thanks and Regards,
Raj
ode_index;
n = vlib_get_node (vm, node_index);
if (0 == memcmp (n->name, input_feat,
sizeof("ip4-policer-classify") - 1))
return 1;
}
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#13392): https:
Hi all,
Any one with experience in using Prometheus plugin for VPP stats
monitoring? Any help in getting started with the Prometheus plugin is
much appreciated.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12854): https
through PPPoE interface.
Thanks and Regards,
Raj
On Thu, Sep 26, 2019 at 7:15 PM Raj via Lists.Fd.Io
wrote:
>
> Hello all,
>
> I am observing a VPP crash when approximately 20 - 50 PPPoE clients
> are connecting and traffic is flowing through them. This crash was
> reproducible
f index can be seen in bt #5:
#5 0x7fba88e9ce0b in vlib_increment_combined_counter
(n_bytes=, n_packets=1, index=538976288,
thread_index=0, cm=0x7fba481f46a0) at
/root/build-1908/src/vlib/counter.h:229
Thanks and Regards,
Raj
vpp# show version verbose
Version: v19.08.1-59~ga2aa83ca9-dir
ve some pointers
to figure out
1. Why, when a new session is created, the data of an old session is
changed to 0x1313
2. What debugging steps can I take next to figure out why this happens.
Thanks and Regards,
Raj
On Sat, Sep 28, 2019 at 6:09 PM Raj via Lists.Fd.Io
wrote:
>
> Hello all
Hello all,
I am looking to see if any one has attempted to connect two VPP using
memif and what pps numbers is seen over memif interface? It would be
great if the VPP config too can be shares so that I can recreate it
locally.
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive
On Mon, Nov 11, 2019 at 5:20 PM Jerome Tollet (jtollet)
wrote:
>
> Did you have a look at
> https://docs.fd.io/csit/rls1908/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.html#
> ?
Thanks for this link. I hadn't seen this before.
raj
-=-=-=-=-=-=-=-=-
age fib_index.
Is leaving snat_session_key_t sm0 uninitialized intentional, or should
it be initialized?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#14587): https://lists.fd.io/g/vpp-dev/message/14587
Mute This Topic: https://l
is not done. vpp version is: 19.01.3-rc0
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#14545): https://lists.fd.io/g/vpp-dev/message/14545
Mute This Topic: https://lists.fd.io/mt/47761827/21656
Group Owner: vpp-dev+ow
0x0
Packet Offload Flags
PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid
PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid
0x1235: 00:02:40:7b:1b:00 -> 00:01:08:00:06:04
btw, if inner VLAN is specified, everything works fine.
Thanks
hitectural rational behind adding one
element to the vector pool at a time, as opposed to allocating a bulk
number initially.
If it is ok to allocate a large pool initially (preferably taking the
max_sessions from a conf file), we can side step this issue.
Thanks and Regards,
Raj
-=-=-=-=-=-=-
Thanks and Regards,
Raj
On Fri, Oct 11, 2019 at 12:17 PM Ni, Hongjun wrote:
>
> Hi Raj,
>
> I tried to reproduce your issue on VPP 20.01 as per your steps for some
> times, but cannot reproduce it.
>
> From your description, please set a breakpoint in
> vnet_pppoe_add_de
so that only outer VLAN interface needs to be created, while
inner VLAN interface will be provided by the control plane
application? Is this a road worth traveling?
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#1
Thanks a lot for the clarification!
Raj
On Tue, Dec 17, 2019 at 7:43 PM John Lo (loj) wrote:
>
> Hi Raj,
>
> A sub-interface with "dot1q inner any" can only work with L2 forwarding via
> cross-connect or bridging where packets are forwarded using MAC header
> witho
M] 0.0-20.0 sec 67 datagrams received out-of-order
[ 5] 0.00-20.00 sec 41.2 MBytes 17.3 Mbits/sec 0.106 ms
40505/70904 (57%) receiver
Thanks and Regards,
Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#14957): https://lists.fd.io/g/v
tx
bytes2533
drops 12
punt 1
ip415386
Thanks and Regards,
Raj
On Mon, Dec 23, 2019 at 11:25 PM Raj via Lists.Fd.Io
wrote:
>
> Hello all,
>
> In VPP I have configured policer to
Hi Florin,
Thanks for the clarification.
Thanks,
-Raj
On Wed, Feb 26, 2020 at 5:14 PM Florin Coras wrote:
> Hi Raj,
>
> Now that’s interesting. VPP detects when an application dies (binary api
> mechanism) and forces through the session layer a de-attach which in turn
> lea
t; 9915
length 7576, checksum 0x225d
01:12:04:676169: error-punt
rx:vppnet1.2001
01:12:04:676170: punt
ip6-udp-lookup: no listener punt
thanks,
-Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15570): https://lists.fd.io/g/vpp-dev/message/15570
:edc4:ESTABLISHED0 0
Thread 3: active sessions 2
ConnectionState Rx-f
Tx-f
[4:0][T] fd0d:edc4::2001::203:6669->fd0d:edc4:ESTABLISHED0 0
[4:1][T] fd0d:edc4::2001::203:57550->fd0d:edc4ESTABLISHED0
399
[4:
Hi Florin,
Yes, [2] patch resolved the IPv6/UDP receiver issue.
Thanks! for your help.
thanks,
-Raj
On Tue, Jan 14, 2020 at 9:35 PM Florin Coras wrote:
> Hi Raj,
>
> First of all, with this [1], the vcl test app/client can establish a udpc
> connection. Note that udp will most p
UDP: 56944 -> 8092
length 1458, checksum 0xb22d
00:09:53:445032: ip6-local
UDP: fd0d:edc4::2001::201 -> fd0d:edc4::2001::203
tos 0x00, flow label 0x0, hop limit 64, payload length 1458
UDP: 56944 -> 8092
length 1458, checksum 0xb22d
00:09:53:445032: ip6-udp-look
Hi ,
I am trying some host application tests ( using LD_PRELOAD) . TCP rx and tx
both work fine. UDP tx also works fine.
The issue is only with UDP rx . In some discussion it was mentioned that
session layer does not support connection-less transports so protocols like udp
still need to
length 1458, checksum 0x0964
00:23:39:401362: ip6-udp-lookup
UDP: src-port 60593 dst-port 8092 (no listener)
00:23:39:401362: ip6-icmp-error
UDP: fd0d:edc4::2001::201 -> fd0d:edc4::2001::203
tos 0x00, flow label 0x0, hop limit 64, payload length 1458
UDP: 60593 -> 809
ssions
Thread 7: no sessions
vpp# sh app client
Connection App
[#1][U] fd0d:edc4::2001::203:58926->udp6_tx_8092[shm]
[#1][U] fd0d:edc4::2001::203:63413->udp6_tx_8093[shm]
vpp#
thanks,
-Raj
On Sun, Jan 19, 2020 at 8:50 PM Florin Coras wrot
dp ipv4-other ipv4
ipv6-tcp-ex
ipv6-udp-ex ipv6-frag ipv6-tcp ipv6-udp ipv6-other
ipv6-ex ipv6
tx burst function: (nil)
rx burst function: mlx5_rx_burst
thanks,
-Raj
On Mon, Jan 20, 2020 at 7:55 PM Florin Coras wrote:
> Hi Raj,
>
>
Correction : -
Please read 17 Mbps as 17 Gbps and 13Mbps as 13Gbps in my previous mail.
thanks,
-Raj
On Tue, Jan 21, 2020 at 6:41 PM Raj Kumar wrote:
> Hi Florin,
> There is no drop on the interfaces. It is 100G card.
> In UDP tx application, I am using 1460 bytes of buffer to send on
utput
> feature, but we don’t run features for packets that hit the glean (i.e. I
> need to ARP) adjacency. So the route needs to resolve via a neighbour
> adjacency. It doesn’t have to be a complete adj, hence you don’t need an
> ARP response, so any address will do.
>
>
>
>
OSED): connecting to peer IPv6 2001:5b0::700:b883:31f:29e:9886
port 51190 proto UDP
udpRxThread started!!! ... rx port = 6677vppcom_session_connect() failed
... -115
vcl_session_cleanup:1300: vcl<16083:1>: session 0 [0x0] closing
vcl_worker_cleanup_cb:190: vcl<94:-1>: cleaned up worker 1
0]
connected! rx_fifo 0x224051a80, refcnt 1, tx_fifo 0x224051980, refcnt 1
vcl_session_app_add_segment_handler:855: vcl<24434:1>: mapped new segment
'24177-4' size 134217728
vcl_session_bound_handler:607: vcl<24434:1>: session 3 [0x0]: listen
succeeded!
vppcom_epoll_ctl:2658: vcl&l
teps that you might
> typically use to run a debug version of the vpp executable file, generate
> packets, and to analyze results.
> wiki.fd.io
>
> --
> *From:* Muthu Raj
> *Sent:* Thursday, May 7, 2020 7:04 PM
> *To:* Filip Tehlar -X (ftehlar - PA
;
>
>ip route add 10.6.0.0/16 via 172.30.x.y lan0.218
>
>
>
> x and y can be anything, apart from x=0 and y=5.
>
>
>
> /neale
>
>
>
> *From: * on behalf of Muthu Raj <
> muthuraj.muth...@gmail.com>
> *Date: *Monday 11 May 2020 at 17:3
patches and it worked perfectly.
https://gerrit.fd.io/r/c/vpp/+/24332
https://gerrit.fd.io/r/c/vpp/+/24334
https://gerrit.fd.io/r/c/vpp/+/24462
Thanks,
-Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#16410): https://lists.fd.io/g/vpp-dev/message
.
I will change my application and will update you about the result.
Thanks,
-Raj
On Fri, May 15, 2020 at 5:17 PM Florin Coras wrote:
> Hi Raj,
>
> We removed udpc transport in vpp. I’ll push a patch that removes it from
> vcl as well.
>
> Calling connect on a udp connec
Hello,
I am trying out IPSec on VPP, and used the wiki[1] to create an IPSec
tunnel between an AWS instance(remote) and my home. The tunnel was
established successfully, and when pinging an IP on the remote side,
the icmp req flows over the tunnel, is seen by the remote box, and
responded back as
3
#14 dispatch_process (vm=0x76d7c200 ,
p=0x7fffb571a000, last_time_stamp=12611933408198086, f=0x0)
at
/usr/src/debug/vpp-20.05-rc0~748_g83d129837.x86_64/src/vlib/main.c:1569
thanks,
-Raj
On Sat, May 16, 2020 at 8:18 PM Florin Coras wrote:
> Hi Raj,
>
> Inline.
>
> On May
ir.hi 0x0 fdir.lo 0xed0f5862
Packet Types
RTE_PTYPE_L3_IPV4 (0x0010) IPv4 packet without extension headers
IP6: 12:27:3c:81:f8:f3 -> 12:43:12:c4:21:97
IPSEC_ESP: 2001::1 -> 2001::2
tos 0x00, flow label 0x0, hop limit 253, payload length 132
Let me know if you need more info.
Thank
n the SPD.
>
> The match in the SPD is against SA 20’s tunnel addresses not the policy’s
> local/remote range.
>
>
>
> /neale
>
>
>
>
>
> *From: *Muthu Raj
> *Date: *Thursday 14 May 2020 at 15:51
> *To: *"muthuraj.muth...@gmail.com"
> *Cc:
Hi Muthu,
>
>
>
> I tried your 4over6 config, it doesn’t work… here’s the fix:
>
> https://gerrit.fd.io/r/c/vpp/+/27019
>
>
>
> /neale
>
>
>
> *From: *Muthu Raj
> *Date: *Monday 11 May 2020 at 21:36
> *To: *"Neale Ranns (nranns)"
> *Cc:
over the tunnel.
On Mon, May 11, 2020, 10:26 PM Neale Ranns (nranns)
wrote:
>
>
>
>
> *From: *Muthu Raj
> *Date: *Monday 11 May 2020 at 18:42
> *To: *"Neale Ranns (nranns)"
> *Cc: *"Filip Tehlar -X (ftehlar - PANTHEON TECH SRO at Cisco)" <
> fte
ashing with UDPC.
Please let me know if there is any other way to compile VPP with the local
code changes.
thanks,
-Raj
.
On Tue, May 19, 2020 at 12:31 AM Florin Coras
wrote:
> Hi Raj,
>
> By the looks of it, something’s not right because in the logs VCL still
> reports it’s bindi
Hi Florin,
Can we please have the fix[1] on "stable/2005" branch.
[1] https://gerrit.fd.io/r/c/vpp/+/28173
Thanks,
-Raj
On Wed, Aug 5, 2020 at 7:30 PM Raj Kumar via lists.fd.io wrote:
> Hi Florin,
> Yes , this[1] fixed the issue.
>
> thanks,
> -Raj
>
> On Wed
t...
>
>
>
> *From:* vpp-dev@lists.fd.io *On
> Behalf Of *Raj Kumar
> *Sent:* Monday, August 17, 2020 5:09 PM
> *To:* Ayush Gautam
> *Cc:* Florin Coras ;
> vpp-dev
> *Subject:* Re: [vpp-dev] VPP 2005 is crashing on stopping the VCL
> applications #vpp-host
version explaining more things (more like
capturing what neale explained to me) with traces in the VPP user docs.
Thanks Neale, Filip and everyone.
On Fri, May 15, 2020 at 3:11 PM Neale Ranns (nranns)
wrote:
>
>
> Hi Muthu,
>
>
>
> *From: * on behalf of Muthu Raj <
>
in ?? ()
#16 0x in ?? ()
thanks,
-Raj
On Mon, May 25, 2020 at 2:17 PM Florin Coras wrote:
> Hi Raj,
>
> Ow, now you’ve hit the untested part of [2]. Could you try this [3]?
>
> Regards,
> Florin
>
> [3] https://gerrit.fd.io/r/c/vpp/+/27235
>
> On May 25
in (argc=50, argv=0x705f00) at
/opt/vpp/src/vlib/unix/main.c:730
#20 0x00407387 in main (argc=50, argv=0x705f00) at
/opt/vpp/src/vpp/vnet/main.c:291
thanks,
-Raj
On Mon, May 25, 2020 at 5:02 PM Florin Coras wrote:
> Hi Raj,
>
> Okay, so at least with that we have support fo
/debug/vpp-20.05-9~g0bf9c294c_dirty.x86_64/src/vppinfra/types.h:133
#12 0x7f0f66009024 in ?? ()
Thanks,
-Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#17110): https://lists.fd.io/g/vpp-dev/message/17110
Mute This Topic: https://lists.fd.io/mt
application for a proper cleanup.
I also tried vppcom_app_destroy() before exiting the main application but
still I am seeing the same issue.
thanks,
-Raj
On Wed, Jul 29, 2020 at 5:34 PM Florin Coras wrote:
> Hi Raj,
>
> Does stopping include a call to vppcom_app_exit o
by vppcom_epoll_wait().
Thanks,
-Raj
On Wed, Jul 29, 2020 at 11:23 PM Florin Coras
wrote:
> Hi Raj,
>
> In that case it should work. Just from the trace lower it’s hard to figure
> out what exactly happened. Also, keep in mind that vcl is not thread safe,
> so make sure you’re not
- Centos 8.1 , vpp release - 20.05
thanks,
-Raj
On Tue, Aug 4, 2020 at 10:24 AM Florin Coras wrote:
> Hi Raj,
>
> Interesting. For some reason, the message queue’s underlying
> pthread_cond_timedwait does not work in your setup. Not sure what to make
> of that, unless mayb
Hi Florin,
After adding use-mq-eventfd in VCL configuration, it is working as
expected.
Thanks! for your help.
vcl {
rx-fifo-size 400
tx-fifo-size 400
app-scope-local
app-scope-global
use-mq-eventfd
api-socket-name /tmp/vpp-api.sock
}
thanks,
-Raj
On Tue, Aug 4, 2020 at 12
Hi Florin,
Yes , this[1] fixed the issue.
thanks,
-Raj
On Wed, Aug 5, 2020 at 1:57 AM Florin Coras wrote:
> Hi Raj,
>
> Does this [1] fix the issue?
>
> Regards,
> Florin
>
> [1] https://gerrit.fd.io/r/c/vpp/+/28173
>
> On Aug 4, 2020, at 8:24 AM, Raj Kumar w
311830
tx bytes ok 128602546562
rx frames ok 1877
rx bytes ok 228452
thanks,
-Raj
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#16863): https://lists.fd.io/g/vpp-dev/
1 - 100 of 106 matches
Mail list logo