I've found that QtWebKit does not actually depend on QtScript module (at least
if configured without
V8 support).
The only thing actually used is enum QScriptEngine::ValueOwnership. If its
definition is included into
Source/WebCore/bridge/qt/qt_instance.h and WebKit/qt/Api/qwebframe.h, QtWebK
14.01.2011, 21:24, "Benjamin Poulain" :
> On 01/14/2011 06:06 PM, ext Konstantin Tokarev wrote:
>
>> I've found that QtWebKit does not actually depend on QtScript module (at
>> least if configured without
>> V8 support).
>>
>>
14.01.2011, 21:38, "Benjamin Poulain" :
> On 01/14/2011 07:30 PM, ext Konstantin Tokarev wrote:
>
>>> Long term QtWebKit will depends on QtScript for the bridge. To avoid
>>> inconsistencies and regressions, I think it would be more reasonable to
>>&
28.01.2011, 23:57, "luying pan" :
> Thanks for the response. That only works the objects that are generated from
> the same makefile, but I think my general problem is that my compiler is too
> old. Do you know any ways to use gcc44 instead of gcc? I tried "export
> CC=gcc44" before running ./
29.01.2011, 00:15, "luying pan" :
> I figured it out. You have to replace gcc and g++ in with gcc44 and g++44 in
> mkspecs/common/g++.conf file in your qt install so that qmake will generate
> all the Makefiles properly.
It's a dirty hack interfering your Qt installation. I'd recommended you t
22.02.2011, 20:15, "Andreas Kling" :
> Heyo everyone,
>
> In preparing for the Qt 4.8 release, I will be removing support for
> building QtWebKit trunk against Qt 4.6, as we normally only support the
> latest two Qt versions.
>
> Are there any objections to this?
Could you specify Qt 4.7-only fe
09.03.2011, 06:04, "周鹏" :
> Hi,guys!
> I get very slow load times on QtWebKit in Linux.Can any one could tell me
> how to avoid painting and layout while loading a page,I just need the page
> content,don't care layout infomation.
My guess is that you don't need QtWebKit for this task. You c
10.03.2011, 04:51, "周鹏" :
> Hi,Konstantin Tokarev！
>
> I must evaluate the javascript in the page,so i don't think
> QNetworkRequest can satisfy my requirement.
Maybe these articles will be interesting for you:
http://labs.qt.nokia.com/2011/03/04/faking-a
24.04.2011, 16:31, "Lindsay Mathieson" :
> I have a git clone of master (g...@gitorious.org:webkit/webkit.git)
> from a couple of weeks back. I've made some minor changes to several
> files in QtWebKit and QtTestBrowser, commited them and just tried to
> do a "git pull" to update from master.
It
01.07.2011, 18:53, viatcheslav.ostape...@nokia.com:
>
>> -simplify APIs to something minimal: QMobileWebView (the viewport) +
>> QMobileWebPage (the view on the page) for mobile. QDesktopWebView as
>> the only view for mobile.
>
> Mobile/Desktop - sounds odd. Who knows, where will be mobile or
26.07.2011, 16:28, "Alexis Menard" :
> As far as I understood the way Qt For Embedded Linux stands today is
> dead/replace/deprecated with Lighthouse no?
Do you expect all embedded developers to switch to Lighthouse overnight
once Qt 4.8 is released?
--
Regards,
Konstantin
18.08.2011, 13:09, "sunny shah" :
> Hi QtWebkit Team,Can you please provide approximate release dates of Qt 4.8
> an QtWebkit 2.2 ?
> My usage is mainly for Linux and Embedded Linux, so let me know, If it is
> stable for that two platforms.
We are using Qt 4.7.3 and QtWebKit 2.1.1 on embedded Li
16.09.2011, 10:30, "Konstantin Tokarev" :
> 16.09.2011, 03:44, "Matt Cote" :
>
>> After the build fails I also have libQtWebKit.so.4.10 libs even though I'm
>> using 4.7.4.
>> Any ideas? Thanks in advance.
>
> It's OK becaus
16.09.2011, 03:44, "Matt Cote" :
> After the build fails I also have libQtWebKit.so.4.10 libs even though I'm
> using 4.7.4.
> Any ideas? Thanks in advance.
It's OK because build failed on test building stage. It's also OK that .so
version does not match Qt version (.so.4.8 == tWebKit 2.1, .so.
16.09.2011, 18:40, "Matt Cote" :
> Hi. Any ideas about what would cause failure on test building?Also... I
> can't seem to run the qt test browser after building because nothing seems to
> be placed in the bin directory.
> [mcot@localhost WebKit-r95080]$ Tools/Scripts/run-launcher --qt
> Startin
Hi all,
Are there any plans on the next QtWebKit release? E.g, when approximately
branch-off should be expected?
--
Regards,
Konstantin
___
webkit-qt mailing list
webkit-qt@lists.webkit.org
http://lists.webkit.org/mailman/listinfo.cgi/webkit-qt
25.11.2011, 14:09, "Simon Hausmann" :
> Hi,
>
> While we're at the topic of third-party libraries (ICU...), there's one other
> thing that I discussed with Andreas yesterday that might make sense for us
> regarding XSLT support:
>
> I'd like to propose that we remove the code that uses QtXmlPatte
25.11.2011, 17:38, benedikte.h...@nokia.com:
> Hi everyone,
>
> This is just a heads-up to let you know we're getting close to releasing Qt
> 4.8.0.
> If you have a QtWebKit bug fix you'd really like to see go into Qt 4.8.0,
> there is a small window left for you to get it in.
>
> Please give u
Seeing other people are posting bugs here, I'd like to highlight one minor
issue with QtWebKit 2.2.
For SH4 platform, recently added JIT compilation is enabled unconditionally so
it cannot be disabled by defining ENABLE_JIT=0 JAVASCRIPTCORE_JIT=no from
outside:
// wtf/Platform.h
#if CPU(SH4) &
25.11.2011, 18:26, "Konstantin Tokarev" :
> 25.11.2011, 17:38, benedikte.h...@nokia.com:
>
>> Hi everyone,
>>
>> This is just a heads-up to let you know we're getting close to releasing Qt
>> 4.8.0.
>> If you have a QtWebKit bug fix you&#x
25.01.2012, 15:09, "Sylvain Pointeau" :
> On Tue, Jan 24, 2012 at 7:28 PM, Jocelyn Turcotte
> wrote:
>> Hi Sylvain,
>>
>> This might take some time, but we will eventually need some way to exchange
>> data between wrapping applications and the web content.
>> It might not be as powerful as QWebE
08.02.2012, 06:30, "Alexis Menard" :
> On Tue, Feb 7, 2012 at 8:45 PM, Lindsay Mathieson
> wrote:
>
>> On Fri, 3 Feb 2012 12:34:44 PM you wrote:
>>> Have been away for a few months dealing with issues - floods etc :( so a
>>> little out of touch, please excuse my massive ignorance as to
>>>
08.02.2012, 15:32, "Alexis Menard" :
> 2012/2/8 Konstantin Tokarev :
>
>> 08.02.2012, 06:30, "Alexis Menard" :
>>> On Tue, Feb 7, 2012 at 8:45 PM, Lindsay Mathieson
>>> wrote:
>>>> On Fri, 3 Feb 2012 12:34:44 PM you wrot
09.02.2012, 14:00, "rakesh sadhu" :
> Hi ,
> I am trying to do Debug build for QtWebKit on Linux Ubuntu 10.10 .
> But I'm getting failure, I've qt4.8 locally build and QTDIR is pointing to
> /usr/local/Trolltech/Qt-4.8.0 .
> Kindly help and errors are in mentioned in pastebin
> http://pastebin.co
10.02.2012, 03:20, "Carlos Smith" :
> People have been asking on the Qt forums with no help, so maybe I’ll have
> better luck here.
>
> Does anyone know why the and tags are not supported in Qt
> 4.8/QtWebkit 2.2, at least on Windows?
>
> The QtWebKit pages on webkit.org say this version of Web
10.02.2012, 15:10, "rakesh sadhu" :
> Hi,
> I'm trying to build debug qtwebkit on linux ubuntu 10.10 32-bit version .
> I am getting error while linking .
> Kindly help , I don;t want to change my OS version from 32 to 64 bit.
You can install 64-bit kernel and gcc while keeping 32-bit userland.
If
10.02.2012, 15:49, "Osztrogonac Csaba" :
> Hi,
>
> Konstantin Tokarev írta:
>
>> 10.02.2012, 15:10, "rakesh sadhu" :
>>> Hi,
>>> I'm trying to build debug qtwebkit on linux ubuntu 10.10 32-bit version .
>>> I am getting
10.02.2012, 16:42, "Osztrogonac Csaba" :
> Hi,
>
> Konstantin Tokarev írta:
>
>> 10.02.2012, 15:49, "Osztrogonac Csaba" :
>>> Hi,
>>>
>>> Konstantin Tokarev írta:
>>>> 10.02.2012, 15:10, "rakesh sadhu"
12.02.2012, 06:37, "XiaoDong Wang" :
> There is a features.pri in qt-everywhere-opensource-src-4.8.0’s
> webkit/Source/WebCore.
> I comment out some features. But got error with generated files
> like
> ../../WebCore/generated/JSHTMLEmbedElement.cpp:304:39: error:
> ‘class WebCore::HTMLEmbedE
19.03.2012, 18:08, "henry.haveri...@nokia.com" :
> On 3/19/12 3:59 PM, "Storm-Olsen Marius (Nokia-MP/Austin)"
> wrote:
>
>> On 3/19/12 2:48 PM, "Haverinen Henry (Nokia-MP/Tampere)"
>> wrote:
>>> The Qt WebKit module can become a part of Qt Essentials, but Qt WebKit
>>> Widgets module cannot, be
31.03.2012, 03:58, "Girish Ramakrishnan" :> Hi,>> On Fri, Mar 30, 2012 at 4:57 PM, Girish Ramakrishnan> wrote:>>> Hi QtWebKit team,>> is QtWebKit 2.3 planned how will this patch end up in Qt? (Is the>> Correction, I meant 'Since there is no QtWebKit 2.3 planned...' Make QtWebKit 2.3 planned? -
30.04.2012, 21:35, "Harsha Buruganahalli" :
> Hi,
>
> I am using webkit(r49229) + directfb(1.4.5) + qt(4.5) on a mips platform &
> facing issues with “Caught signal 11 (at (nil), invalid address”. Debugging
> on this by allocating more memory did not solve the issue.
>
> Wonder where exactly I c
01.05.2012, 16:28, "Harsha Buruganahalli" :
> Thanks for the reply Konstantin,
>
> I had a check and I see that we are not using the -ffunction-sections compile
> options.
It's set inside one of .pro files.
> Why do you suspect the toolchain? Have you witnessed this failure before?
I had rand
05.06.2012, 16:53, "Balazs Kelemen" :
> Hi all!
>
> I think it's time to decide how important is the v8 integration for us. I'm
> not saying it's hyper-super important, I'm just curious about your opinion.
> In fact we have a qt5 release blocker bug for that:
> https://bugs.webkit.org/show_
14.08.2012, 17:52, "Coda Highland" :
> My first suggestion would be to check out the qtwebkit-2.3 branch and
> try using that; it's much better all around.
Or try to rebuild with --system-malloc
--
Regards,
Konstantin
___
webkit-qt mailing list
webki
28.08.2012, 16:33, "Michael" :
> Hi All,
>
> when using Visual Studio 2010 to build QtWebkit 2.3
> fromhttps://gitorious.org/+qtwebkit-developers/webkit/qtwebkit-23 with
> binaries/source Qt 4.8.2 installed,
>
> i do get the following link errors:
>
> link /LIBPATH:"p:\qtwebkit-23\WebKit
Hi all,
There was a patch [1] that was later reverted because of performance
degradation on DirectFB, where QPixmap is hardware accelerated.
We use QtWebKit 2.3.3 with Qt 4.8 on embedded system. We have internally
written gfxdriver for QWS which does not provide hardware acceleration for
QPixm
13.09.2013, 15:50, "Jocelyn Turcotte" :
> On Fri, Sep 13, 2013 at 03:12:59PM +0400, Konstantin Tokarev wrote:
>
>> Hi all,
>>
>> There was a patch [1] that was later reverted because of performance
>> degradation on DirectFB, where QPixmap is hardware a
04.10.2013, 12:05, "arnaud le roy" :
> hello,
>
> i try to compile the webkit 2.3 but i get some compilation error with
> the media_stream options :
>
> In file included from WebCore/bindings/js/JSEventTargetCustom.cpp:29:0:
> generated/EventTargetHeaders.h:130:30: fatal error: LocalMediaStream.h
04.10.2013, 17:13, "arnaud le roy" :
> Le 04/10/2013 10:10, Konstantin Tokarev a écrit :
>
>> 04.10.2013, 12:05, "arnaud le roy" :
>>> hello,
>>>
>>> i try to compile the webkit 2.3 but i get some compilation error with
>>>
04.10.2013, 21:54, "arnaud le roy" :
> thanks,
>
> now it compiles fine but i have some unresolved symbol in the final
> linkage !
>
> for exemple :
>
> WebCore.lib(JSRTCPeerConnection.obj) : error LNK2019: unresolved
> external symbol "public: void __thiscall WebC
> ore::RTCPeerConnection::getSt
05.10.2013, 15:40, "arnaud le roy" :
> thanks,
>
> i have found my problems this morning and i post it but the message
> awaits approval.
>
> this is the message :
>
>> hello,
>> after some modifications, i have successfully compile the webkit with
>> this options :
>> --qt --media-stream --media
05.10.2013, 16:11, "arnaud le roy" :
> Le 05/10/2013 14:00, Konstantin Tokarev a écrit :
>
>> 05.10.2013, 15:40, "arnaud le roy" :
>>> thanks,
>>>
>>> i have found my problems this morning and i post it but the message
>&
25.10.2013, 16:58, "Richard Gerd Kuesters" :
> Hello all!
>
> I am currently tweaking one of my webkit applications to shrink its size
> (bandwidth costs are sometimes high).
You can shrink QtWebKit by using custom options of build-webkit script. For
example, disabling SVG support will make it
25.10.2013, 22:21, "Richard Gerd Kuesters" :
> Thanks Andras!
>
> I'm sorry for my DLL list. We already rips *d.dll from the distrib :)
>
> I was wondering if print or qml or quick or sensors are really necessary for
> webkit to work ...
That depends only on what your application uses and what a
27.10.2013, 02:17, "Richard Gerd Kuesters" :
> Thanks again Konstantin!
>
> I think my best hope is based on what you glimpsed while pondering about SVG
> support on Webkit: compiling Qt submodules one by one, using the switches I
> might need and other that don't - doing so in a extreme fast ma
27.10.2013, 02:17, "Richard Gerd Kuesters" :
> Thanks again Konstantin!
>
> I think my best hope is based on what you glimpsed while pondering about SVG
> support on Webkit: compiling Qt submodules one by one, using the switches I
> might need and other that don't - doing so in a extreme fast ma
28.10.2013, 15:36, "Richard Gerd Kuesters" :
> Well, it might appear as a very dumb question, but ... where do I find this
> version of QtWebkit that doesnt depends on lib ICU? I was digging around with
> version 2.3 (including ones already included in Qt 5.2 b1) and they still
> needs ICU.
gi
28.10.2013, 15:50, "Richard Gerd Kuesters" :
> Yes, I just did that :)
>
> My only doubt was that I saw some ICU unicode header files in the .pro files.
> So, I can just drop this on top of the Qt version I use and bye bye ICU?
You don't need to change .pro file to drop ICU (I don't do it).
--
28.10.2013, 22:49, "Richard Gerd Kuesters" :
> Well ... Is it just with me or gitorious is completely unable to work with?
Works fine here. You can try ssh or https url - it might be you are behind a
firewall that blocks git protocol.
--
Regards,
Konstantin
_
29.10.2013, 17:42, "Richard Gerd Kuesters" :
> Ok, QtWebkit 2.3.3 downloaded! :)
>
> But, I feel that it'll not work as a simple dropin on top of Qt 5.x,
> specially if I try to compile it on Windows.
>
> I noticed a huge difference in the Makefiles (and .pro?) files from the
> QtWebkit shipped
29.10.2013, 19:13, "Konstantin Tokarev" :
> I'm afraid QtWebKit 2.3.3 was not tested on Windows at all (though I may be
> wrong).
Looks like QupZilla uses QtWebKit 2.3 on Windows [1], so my guess was wrong :)
[1] https://github.com/QupZilla/qupzilla
--
31.10.2013, 13:05, "Thomas Scheuermann" :
> Hello,
>
> I would like to run a network video stream in webkit.
> I first tried it with a file:
>
>
>
>
>
> This works and the video starts playing.
> If I use:
>
>
> src="rtsp://192.168.180.22/axis-media/media.amp?videocodec=h264">
>
>
06.11.2013, 17:42, "Rethmeier, Eike" :
> Hi,
>
> by moving from Qt5.1 to Qt5.2 we encountered some CSS rendering changes with
> FlexBoxes. Because we want to track down the source of the changes (most
> likely these changes are actually bugfixes in WebKit) we need the versions of
> WebKit (not
26.02.2014, 00:38, "Richard Gerd Kuesters" :
> hello all! :)
>
> i was reading some of webkit resources, and one of them is to provide local
> database storage, including sqlite3.
>
> ok, i'm developing a custom application with webkit, and i would like to
> expose my apps database to it, so i c
26.02.2014, 13:26, "Allan Sandfeld Jensen" :
> On Wednesday 26 February 2014, Konstantin Tokarev wrote:
>
>> 26.02.2014, 00:38, "Richard Gerd Kuesters" :
>>> hello all! :)
>>>
>>> i was reading some of webkit resources, and one o
26.02.2014, 13:29, "Konstantin Tokarev" :
> 26.02.2014, 13:26, "Allan Sandfeld Jensen" :
>
>> On Wednesday 26 February 2014, Konstantin Tokarev wrote:
>>> 26.02.2014, 00:38, "Richard Gerd Kuesters" :
>>>> hello all! :)
>>
06.03.2014, 20:52, "Manish Gurnaney" :
> Hi Arijit,
> I have set following paths in the .bashrc file
> export QTDIR=/usr/share/qt4
> export PATH=$QTDIR/bin:$PATH
> export QMAKEPATH=/home/OpenSource/webkit/Tools/qmake
>
> Apart from that when check the qmake version it says
> 1) q
Hi Kenneth,
I'm aware that you are not working on WebKit for a long time, however I'd like
to ask you some questions about your code.
1. In patch [1] what was the motivation for not sending surroundingText in case
of result.isInPasswordField? In this case code from patch [2] sets hints
Qt::Imh
Hello everyone,
I'd like to upgrade QtWebKit to modern WebKit code base.
One particular goal is to obtain modern browser engine capable of running in
low memory conditions on MIPS device, which would have relatively small binary
size.
I'd like to support the next configurations:
* OS: Linux
30.12.2015, 15:00, "Konstantin Tokarev" :
> In case anyone does not follow WebKit development, here are several
> highlights of what has changed since last QtWebKit branch-off:
>
> * Partial ES6 support in JavaScriptCore
> (https://webkit.org/blog/4054/es6-in-webkit
30.12.2015, 20:01, "Coda Highland" :
> I'm interested but contractually prohibited from contributing. :( I
> wish you the best of luck.
Thank you! Let's hope there will be something for you to test eventually :)
--
Regards,
Konstantin
___
webkit-qt m
Hi all,
(reposting here from webkitnix group in case anyone from INdT team is still
reading this list)
I just re-read announcement of Nix from 2013 [1], and it mentions QtWebKit +
libsoup experiment.
Were its details (goals, results, source code) published somewhere?
I'm also interested why l
Hello again,
I've created repository at https://github.com/annulen/webkit. Branch qtwebkit-1
contains Qt port of JavaScriptCore, it can be built with build-webkit script.
Resulting jsc executable successfully passes tests.
I've added some other information to the wiki:
https://github.com/annul
11.01.2016, 14:33, "Vitaly Slobodin" :
> Hello,
>
> First of all, I want to say thank you for reviving QtWebkit. We (the
> PhantomJS team) are really depend on it.
Thanks! Great to know there are more people interested in QtWebKit.
> We tried to use QtWebEngine but, unfortunately, it doesn't s
11.01.2016, 14:53, "Vitaly Slobodin" :
>
> I'll definitely help you as much as I can!
>
Please take a look at https://github.com/annulen/webkit/wiki/Open-Projects
Also, there are some missing bits in WTF that need to have Qt implementation:
Source/WTF/wtf/qt/RunLoopQt.cpp
Source/WTF/wtf/qt/Wor
11.01.2016, 14:53, "Vitaly Slobodin" :
>> Thta's sad to see work being duplicated. You should have been notified
>> others on the list. Nevertheless, I hope we will be able to join our work.
>
> Well, I did it really quickly, so I know that there're some problems. I just
> wanted to check if i
11.01.2016, 14:15, "Konstantin Tokarev" :
> Hello again,
>
> I've created repository at https://github.com/annulen/webkit. Branch
> qtwebkit-1 contains Qt port of JavaScriptCore, it can be built with
> build-webkit script. Resulting jsc executable successfully pas
or JIT, you
can get some limited amount of help here (though I only have big-endian ppc32
near)
You can start from building JSC, we need to sort out build issues.
If you are cross-compiling you'll need to prepare toolchain file for CMake.
>
> Thanks,
> Atul.
>
> On Mon, Jan 1
Hi all,
Is anybody here interested in QtWebKit on OS X?
Aside from ongoing project of QtWebKit reviving (which you are welcome to join
in), there are several possible improvements in QtWebKit 5.6 which could be
made if you help with testing.
--
Regards,
Konstantin
20.01.2016, 18:33, "Coda Highland" :
> On Wed, Jan 20, 2016 at 7:19 AM, Konstantin Tokarev wrote:
>> Hi all,
>>
>> Is anybody here interested in QtWebKit on OS X?
>>
>> Aside from ongoing project of QtWebKit reviving (which you are welcome
20.01.2016, 19:43, "Konstantin Tokarev" :
> 20.01.2016, 18:33, "Coda Highland" :
>> On Wed, Jan 20, 2016 at 7:19 AM, Konstantin Tokarev
>> wrote:
>>> Hi all,
>>>
>>> Is anybody here interested in QtWebKit on OS X?
>>&g
13.08.2014, 08:48, "Max Stepin" :
> So since my code lives in
> WebCore/platform/image-decoders/png/PNGImageDecoder.cpp
> it might actually affect QtWebKit in some cases?
>
> But if you're not a port, then I guess I'll go and bug GTK again... :)
>
> As I understand, Apple uses their own system l
Hi all,
I'm pleased to announce that qtwebkit-1 branch in repository [1] now contains
everything needed for successful linking of libQt5WebKit.so on Linux using gcc
4.8.4 or clang 3.7. Branch is based on today's trunk and uses B3 compiler as a
default FTL backend.
Note that QtTestBrowser is no
15.02.2016, 21:20, "mepard" :
> On Feb 12, 2016, at 9:32 AM, Konstantin Tokarev wrote:
>> It would be great if someone tried to compile the code on OS X (10.10 or
>> 10.11 is required) and report encountered issues.
>
> I had to make 2 changes to build on OS
15.02.2016, 21:35, "Konstantin Tokarev" :
> 15.02.2016, 21:20, "mepard" :
>> On Feb 12, 2016, at 9:32 AM, Konstantin Tokarev wrote:
>>> It would be great if someone tried to compile the code on OS X (10.10 or
>>> 10.11 is required) and re
tringCF.cpp)
> [D:\working\webkit\WebKitBuild\Release\Source\WTF\wtf\WTF.vcxproj]
> D:\working\webkit\WebKitLibraries\win\include\CoreFoundation/CFMessagePort.h(11):
> fatal error C1083: Cannot open include file: 'dispatch/dispatch.h': No such
> file or directory (compiling so
ation error as before when I compile WebKit.
>
> 1>-- Build started: Project: WebKit (WebKit\WebKit), Configuration:
> Release Win32 --
>
> 1> WebKitPrefix.cpp
>
> 1>D:\working\webkit\WebKitLibraries\win\include\CoreFoundation/CFMessagePort.h(11):
> fatal e
19.02.2016, 11:50, "Cheng, Bobber" :
> Thanks.
>
> Bobber
Please retry now.
>
> -Original Message-
> From: Konstantin Tokarev [mailto:annu...@yandex.ru]
> Sent: Thursday, February 18, 2016 11:47 PM
> To: Cheng, Bobber; webkit-qt@lists.webkit.org
>
This release was brought to you by Konstantin Tokarev (annulen) and Vitaly
Slobodin (vitallium), with invaluable help of WebKit and Qt communitites'
members.
Happy hacking, and stay tuned!
--
[1] Source code: https://github.com/annulen/webkit/archive/qtwebkit-tp1.zip
Hi all,
We are pleased to announce QtWebKit Technology Preview 2. You can find download
links below [1].
This release includes bug fixes and improvements as compared to Technology
Preview 1 [2].
Restored Web APIs to improve feature parity with QtWebKit 5.7:
---
Hello,
In case anyone here were willing to build bleeding edge of QtWebKit from
sources, but were stopped by immense size of git repository [1], now we have
lean and mean repository [2] which contains only files which are *required* to
build QtWebKit instead of complete WebKit tree.
Please try
19.08.2016, 18:34, "Andrew Webster" :
> This may be a question for webkit-dev, but I thought I'd check here first
> since I'm using qtwebkit-tp3.
>
> On an arm 32-bit platform in SpeculativeJIT::speculate, I occasionally hit
> the default handler which contains a release assert when using the
19.08.2016, 20:43, "Konstantin Tokarev" :
> 19.08.2016, 18:34, "Andrew Webster" :
>> This may be a question for webkit-dev, but I thought I'd check here first
>> since I'm using qtwebkit-tp3.
>>
>> On an arm 32-bit platform in Spec
Hello everyone,
We are pleased to announce QtWebKit Technology Preview 3!
Highlights of this release are:
* NPAPI and Qt plugins are finally supported on X11 and Windows (not on macOS
yet, sorry)
* Bulk of the patches which have never been in the trunk of webkit.org was
merged from Qt repositor
19.08.2016, 22:08, "Jason H" :
>> Hello everyone,
>>
>> We are pleased to announce QtWebKit Technology Preview 3!
>>
>> Highlights of this release are:
>>
>> * NPAPI and Qt plugins are finally supported on X11 and Windows (not on
>> macOS
>> yet, sorry)
>>
>> * Bulk of the patches which ha
23.08.2016, 17:16, "Florian Bruhin" :
> Hi,
>
> * Gokul kumar [2016-08-23 18:54:36 +0530]:
>> I'm trying to build a project which uses QT5.6.
>>
>> When I try to build it I'm getting following error.
>>
>> *Project ERROR: Unknown module(s) in QT: webkitwidgets*
>
> QtWebKit was removed from Q
s://bugs.webkit.org/show_bug.cgi?id=161029.
>> AnyInt includes int52 representation, that is only allowed in 64bit DFG.
>> (See enableInt52())
>>
>> On Sat, Aug 20, 2016 at 2:49 AM, Konstantin Tokarev
>> wrote:
>>> 19.08.2016, 20:43, "Konstantin Tokarev" :
t run the JSC test suite.
>
> Thanks a lot Yusuke and Konstantin!
>
> Andrew
> ________
> From: Konstantin Tokarev
> Sent: Tuesday, August 23, 2016 2:00 PM
> To: Yusuke SUZUKI
> Cc: Andrew Webster; webkit-qt@lists.webkit.org; jsc-...@lis
Hi all,
There was some interest in getting MinGW support in QtWebKit. I've added
preliminary instruction at [1]. It uses MSYS2 package repository to set up
build environment without much hassle.
If anyone has interest to fix remaining build issues you can checkout
mingw_build branch from git r
Hi all,
QtWebKit Technology Preview 5 is out.
Highlights of these release are:
* WebGL, accelerated compositing and accelerated 2D canvas are supported now.
Accelerated compositing is disabled by default for now, it is known to cause
minor artifacts on some sites.
* MinGW compiler is now full
08.02.2017, 08:31, "Charles-Elie Gentil" :
> Hello,
>
> I want use QtWebKit and so, I build it following these instructions :
> https://github.com/annulen/webkit/wiki/Building-QtWebKit-on-OS-X
> I add a CMAKE_INSTALL_PREFIX to have this command :
>
> ./Tools/Scripts/build-webkit --qt --cmakeargs
gt; Best regards,
>
> Charlie
>
> m...@jiyuusoft.net
> http://blog.jiyuusoft.net
>
>> Le 8 févr. 2017 à 08:41, Konstantin Tokarev a écrit :
>>
>> 08.02.2017, 08:31, "Charles-Elie Gentil" :
>>> Hello,
>>>
>>> I want use QtWebK
h my computer ;-)
> )
>
> Thank
>
> Best regards,
>
> Charlie
>
> m...@jiyuusoft.net
> http://blog.jiyuusoft.net
>
>> Le 9 févr. 2017 à 08:25, Konstantin Tokarev a écrit :
>>
>> 09.02.2017, 10:13, "Charles-Elie Gentil" :
>>> Hello,
&g
our system that I don't know)
I guess I should write detailed installation instruction :)
>
> Envoyé de mon Galaxy S6 Orange
>
> Message d'origine
> De : Konstantin Tokarev
> Date : 09/02/2017 08:43 (GMT+01:00)
> À : Charles-Elie Gentil
> Cc : we
ur mkspecs/modules/qt_lib_core.pri? Thanks! Best regards,Charlie m...@jiyuusoft.nethttp://blog.jiyuusoft.net Le 9 févr. 2017 à 18:23, Konstantin Tokarev <annu...@yandex.ru> a écrit : 09.02.2017, 20:00, "Charles-Élie G" <m...@jiyuusoft.net>:Hi,Unfortunately, I have the same pr
om/annulen/webkit/pull/388 Best regards,Charlie m...@jiyuusoft.nethttp://blog.jiyuusoft.net Le 9 févr. 2017 à 18:23, Konstantin Tokarev <annu...@yandex.ru> a écrit : 09.02.2017, 20:00, "Charles-Élie G" <m...@jiyuusoft.net>:Hi,Unfortunately, I have the same problem if I do it. :-
s,Charlie m...@jiyuusoft.nethttp://blog.jiyuusoft.net Le 10 févr. 2017 à 18:44, Konstantin Tokarev <annu...@yandex.ru> a écrit : 10.02.2017, 10:33, "Charles-Elie Gentil" <m...@jiyuusoft.net>:Hi, Yes … I do it.I have just rebuild from qtwebkit-tp5.tar.xz with debug and release
23.04.2017, 10:49, "Thomas Rusche" :
> Hello and first of thanks for this great project, bringing back WebKit to Qt!
> It is so much better than the new blink-stuff.
>
> I downloaded the technical preview 5 that does now support MinGW
> 'qtwebkit-tp5-qt58-mingw530-x86.zip' from
> https://githu
Hi all,
I've just merged WebKit 2 changes into qtwebkit-stable. From this moment it's
enabled by default on all systems except macOS and Windows. This means that you
can use QML API on these systems, but there are a few known problems:
* WebView is not flickable by default, until this bug is fi
1 - 100 of 146 matches
Mail list logo
