I think I found the problem. And it is very embarrassing to admit. :-(
I couldn't find any problems, when it stroke me. If everything seems to
work and the station does not show up where expected to. Then it could be a
wrong coordinate. So going to google maps and reading the expected
Hi mwall
there have been a few successful registrations by https://detlillehus.info:
>
> 2020.05.26 05:27:12
>
> 2020.05.29 04:54:07
>
> 2020.05.31 19:13:21
>
> 2020.05.31 19:20:42
>
> 2020.06.01 05:36:49
>
> 2020.06.03 05:43:42
>
> and i can see it in the listing (expand the 'Stations' section):
Hi Greg
You need this bit:
>
> [[StationRegistry]]
> # To register this weather station with weewx, set this to true
>
register_this_station = true
>
As I wrote this has allready been done. Actually it's an station with about
2 years uninterrupted run (more or less). And has
Yes, but my statipn has been runnimg for years. :-)
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this
Yes, but my station has been running for years :-)
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this
As I stated, this is allready done.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web
Hi again
I just wanted for the fun to see if my Weewx station was registered on the
Weewx map. But it is not!
I checked if I had set the station_register variable to true, which I had.
And according to the documentation that should be enough as long as there
allready is set a station_url in
> Nice with som inputs.
>
> So I could actually set up a raspberry pi to collect data from my
> greenhouse in a weewx swtup and implement those readings in another (the
> master) weewx server. I think this i probably my best shot.
>
> This seems doable, without to much hazzle.
>
Thank
Hi good folks of Weewz.
I have a fantastic setup with weewx, and it is just running unproblematic
day after day. Rock solid! I'm really pleased with it. Thanks to Tom.
Thumbs up really.
Well now I'm curious. I'm not really a programmer, but have done a fair
share on embedded C-programming.
Finally I found it.
The variable is indeed formed in the skin.conf file. Now I've got it
working.
Thank you for your inputs. :-)
Cheers
Bent
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving
Oh but I have. But this particular problem is not described in the
custumizing guide.
And as far as I can see this particular variable is not constructed in the
skin template.
I have been searching for the word "on" in the templates, and found out
that the word "on" is in really many words.
I have earlier had a subject on some locale problems. They are solved now.
But some of the variables are filled with data from the database and the
earlier - for me - so troublesome locale.
One is this one: $week.outTemp.maxtime
It has a time of the observation plus a word "on" and then the
You are absolutely right.
And I finally found out how to do it, except I used: update-locale
LC_ALL=da_DK.utf-8 and rebooted the server.
I guess the miss-mash might have come from the installation of my server
which is a howtoforge installation which includes ispconfig. And the
howtoforge
I have done some more research.
It have tried again with standard skin, and it is doing the same thing
whether I use standard or byteweather, so my challenge is not about
Byteweather skin. So far so good.
And as Thomas suggests looking in the logfile, there are some things that
suggests that
I have done some more research.
It have tried again with standard skin, and it is doing the same thing
whether I use standard or byteweather, so my challenge is not about
Byteweather skin. So far so good.
And as Tom suggests looking in the logfile, there are some things that
suggests that the
;> used the setup.py install method. If not, adjust accordingly)
>>
>> If after all this, you have a Danish locale listed in the system log, and
>> you still get German names for *both* Byteweather and the Standard WeeWX
>> skin, then I've run out of ideas. If you ge
ing, type
> this:
>
> *echo $LANG*
>
> See the section *Environment variable LANG* in the Customizing Guide for
> more information.
>
> -tk
>
> On Wed, Sep 26, 2018 at 11:50 AM Bent Jensen > wrote:
>
>> I'm using Byteweather skin for the time being.
>&
two services, with slightly different names. Then use
> two entries in your weewx.conf. Then run them both.
>
> -tk
>
> On Mon, Sep 24, 2018 at 2:07 AM Bent Jensen > wrote:
>
>> Hi good people of weewx.
>>
>> I have had a problem but after good peoples h
I'm using Byteweather skin for the time being.
I have customised it into danish. But when looking at the weekly stats (and
the month names in the main page), the daynames are in german. Howcome, and
where do 'i change that? It must be some localisation setting I'm missing
somewhere.
I have
No pointers?
Does it meen that it is not possible to make more than one email type?
Cheers Bent
mandag den 24. september 2018 kl. 11.07.27 UTC+2 skrev Bent Jensen:
>
> Hi good people of weewx.
>
> I have had a problem but after good peoples help in here, it is working
> like
Hi good people of weewx.
I have had a problem but after good peoples help in here, it is working
like a charm. And so many good tips and tricks to take advantage of.
But. I have the alarm example up and running (except I tried doing an
expression with a single equation sign, but I think python
ing.
I am very grateful and happy about your help, thank you.
How do I suggest the changes to the driver, so the driver can be updated
for others to prevent the same headache?
Bent
onsdag den 12. september 2018 kl. 19.42.42 UTC+2 skrev Bent Jensen:
>
> I will try that. I'll get bac
I will try that. I'll get back with an answer in approx. 24 hours.
Bent
tirsdag den 11. september 2018 kl. 21.59.13 UTC+2 skrev mwall:
>
> On Tuesday, September 11, 2018 at 11:52:48 AM UTC-4, Bent Jensen wrote:
>>
>> Ok now I got an output in the log, that is actually useful
ot;. But I don't really know what to
do about it. It's either the driver for netatmo or The API at netatmo
servers.
Bent
tirsdag den 11. september 2018 kl. 14.24.41 UTC+2 skrev Bent Jensen:
>
> Sorry Gary, I didn't see you answer. Thank you for your suggestion.
>
> I am currently
Sorry Gary, I didn't see you answer. Thank you for your suggestion.
I am currently triyng your suggestion, but it might take a day or two until
it shows. It almost allways happens at night (my night), but not at the
same time.
But in the meantime I can tell that I have installed weewx on
rsync
upload not requested. Skipped.
As you can see it "hangs" at 4:34 and never makes new pages nor new log
entries. I had to restart it at 5:50. And there are no clue at all in the
log as to what could cause the "hanging"
Best regards
Bent
tirsdag den 4. september 20
older timestamp?
>
> It would help if you could explain the context of the log.
>
> -tk
>
> On Tue, Sep 4, 2018 at 6:51 AM Bent Jensen >
> wrote:
>
>> I Know it produces html and where the are. But all of a sudden it stop
>> generating, which can be seen from the timest
I Know it produces html and where the are. But all of a sudden it stop
generating, which can be seen from the timestamp on the html pages.
But I took a new approach. I have started all over by changing the database to
a mysql database. I know all my measures until.now are lost, but it has just
I have a problem with my installation of weewx. It hangs at random. There
is no special time, some times it's after running for 2 hours sometimes
it's after running almost a Whole day. And the peculiar thing is it is not
stopping weewx, it just doesn't publish html anymore and it is not making
29 matches
Mail list logo
