ports). I saw
that weewx was running as user weewx (hmm, don't recall that...). User
weewx was a member of group weewx, so amended the device ownership to:
root:weewx.
Cheers, Jason.
On Tuesday 20 February 2024 at 17:10:27 UTC+11 vince wrote:
> Is it working now ? What thoughts
all seems well. Thoughts, anyone?
Best regards, Jason.
On Sunday 11 February 2024 at 07:36:30 UTC+11 Joseph Verreau wrote:
> p.p.s I just noticed that I didn't have the subsystem prefix on my rule.
> So my entry in 50-localusb.rules is:
> SUBSYSTEM=="tty",ATTRS{serial}==&q
outTemp = temperature_out
outHumidity = humidity_out
dateTime = dateTime
usUnits = usUnits
pressure = pressure
windDir = wind_dir
windSpeed = wind_speed
UV = uv
And data doesn't seem to be flowing into Weewx. I guess I could
rain = drain_piezo
rainRate = rrain_piezo
supplyVoltage = wh90batt
referenceVoltage = ws90cap_volt
Not sure where to go from here.
Cheers,
Jason
On Wednesday, June 14, 2023 at 3:41:00 AM UTC+10 Rainer Lang wrote:
> Hi Jason
>
> 1. the local API (lo
ain_piezo: 1.209
ws90cap_volt: 5.2
ws90_ver: 133
gain10_piezo: 1.15
gain20_piezo: 1.05
gain30_piezo: 1.00
gain40_piezo: 1.00
gain50_piezo: 1.00
wh90batt: 3.10
freq: 433M
model: HP2564CA_Pro_V1.9.0
interval: 30
Cheers,
Jason
--
You received this message because you are subscribed to the Google Group
coding UTF-8
#set $show_rss = $DisplayOptions.get('show_rss', True)
#set $show_reports = $DisplayOptions.get('show_reports', True)
Was there maybe a change to weewx.conf or skin.conf that allowed templates
access to these functions? I didn't accept those updates since they can
Thanks for the heads up, definitely a point in its favour!
On Thursday, September 10, 2020 at 9:57:59 AM UTC+10 Dan'l B wrote:
> There is a Maxbotix extension
> <https://github.com/weewx/weewx/wiki/maxbotix> already available for
> WeeWx.
>
> On 9 Sep, 2020, at
there other skins with AU
features I should know about?
thanks .. Jason
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googl
electrosense emailed back saying they no longer sell their Aquagauge. lots
of options for diy submerged pressure gauges though.
A problem with a submerged pressure gauge for me is that it might get
washed away in a flood. So I'm exploring ultrasonic and lidar. Ultrasonic
tends to have limite
ame, not an actual
type. I know this sounds picky, but it confused me at first. If there's a
link to a list of normal values for obs_type, that would be helpful.
My code is below in case any of it would be useful for documentation.
Thanks!
Jason
P.S. The yearly plots started working o
ot;inDewpoint" in skin.conf for the daytempin plot. It looks
like inDewpoint is a generated value. Can plots use inDewpoint?
Thanks,
Jason
On Saturday, July 18, 2020 at 9:00:58 PM UTC-4 tke...@gmail.com wrote:
> Hello, Jason! Have not heard from you in years!
>
> The "backf
at for day
and week, but month/year appear to be missing data. I see that the stats
tables are now part of weewx.sdb. During startup, it spent a few minutes
"generating stats" and I see the new tables in weewx.sdb. Is there a way to
tell it to go back further and generate, say, a year of st
Heres my log :
Jul 1 11:19:37 WxPI weewx[1949] DEBUG weewx.engine: Finished loading
service weewx.restx.StdAWEKAS
Jul 1 11:19:37 WxPI weewx[1949] DEBUG weewx.engine: Loading service
weewx.engine.StdPrint
Jul 1 11:19:37 WxPI weewx[1949] DEBUG weewx.engine: Finished loading
service weewx.engi
I'm getting the same error here as well with my WMR200 and Rpi
On Saturday, 20 June 2020 08:06:10 UTC-3, Alessandro wrote:
>
> Hello all,
> firstly thanks so much for your work!
>
> As newbie, I'm having a problem running Weewx on Raspi 4 and Wmr200 as
> weather station.
>
> I installed weewx 3
You answered my question indirectly, thanks.
*python -V returns*
*Python 2.7.17*
*python -c "import ephem" returns nothing*
*python3 -c "import ephem" returns*
*Traceback (most recent call last):*
* File "", line 1, in *
*ModuleNotFoundError: No module name
Thanks for this.
You were correct - when I run with the explicit python I get the same
result on both.
I have python 2.7.17 and python 3.6.9 from what I can see. Do you mean
multiple versions of 2.x.x (or 3.x.x) or would having 2 and 3 versions
installed cause this problem?
Regards,
Jason
:
Sunrise: 07:07:36
Sunset: 19:59:08
Moon Phase: First quarter (50% full)
The same config file is used for both wee_reports and when I restart weewx.
Any ideas - I must have missed something?
Regards,
Jason.
--
You received this message because you are subscribed to the Google Grou
2019 20:12:41 UTC+1, Jason wrote:
>
> Is it possible to add a Barometer offset to weewx as my ftp upload shows
> presssure to be at 14 mb higher than what both my base unit and mercury
> Barometer shows.
> I believe Weewx shows real level pressure which is higher than what it i
the end of
the reading.
Index of /g/g4bgq-drm//index/weewx
<https://www.qsl.net/g/g4bgq-drm//index/weewx/>
On Saturday, 5 October 2019 20:12:41 UTC+1, Jason wrote:
>
> Is it possible to add a Barometer offset to weewx as my ftp upload shows
> presssure to be at 14 mb h
Is it possible to add a Barometer offset to weewx as my ftp upload shows
presssure to be at 14 mb higher than what both my base unit and mercury
Barometer shows.
I believe Weewx shows real level pressure which is higher than what it is
at my 120 meter high location.
I have been thro all config
Thank you that is done, now how do I edit the config file to change the ftp
settings, it will not let me save it.
On Wednesday, 2 October 2019 10:30:19 UTC+1, Jason wrote:
>
> Following my previous post I uninstalled and re-installed weewx under
> python as a simulator. this is wor
Following my previous post I uninstalled and re-installed weewx under
python as a simulator. this is working fine.
How do I change from simulator to a WH3081 station without messing up the
installaation.
Thanks.
--
You received this message because you are subscribed to the Google Groups
"weew
UTC+1, Jason wrote:
>
> I have installed Weewx on a Raspberry Pi 4 and get the message on the
> image above. It weems to be directing the command to the wrong directory.
> Weewx is installed in /etc/weewx so cannot be found.
> How do I change the startup command to the correct direct
I have installed Weewx on a Raspberry Pi 4 and get the message on the image
above. It weems to be directing the command to the wrong directory.
Weewx is installed in /etc/weewx so cannot be found.
How do I change the startup command to the correct directory.
Is there a way to view the working app
On Tuesday, 1 October 2019 11:53:54 UTC+1, Jason wrote:
>
> I have installed Weewx onto my Paspberry Pi 4B
> I don't understand the error message when I start it.
> can I view the data locally, ie on the PC via VNC viewer,
> What if any files do I have to put on my ftp si
On Tuesday, 1 October 2019 11:53:54 UTC+1, Jason wrote:
>
> I have installed Weewx onto my Paspberry Pi 4B
> How do I know if it is running,
> can I view the data locally, ie on the PC via VNC viewer,
> What if any files do I have to put on my ftp site so as to view the dials
I have installed Weewx onto my Paspberry Pi 4B
How do I know if it is running,
can I view the data locally, ie on the PC via VNC viewer,
What if any files do I have to put on my ftp site so as to view the dials
etc.
At the moment I don't know what to do next, any advice would be appreciated.
Thank
I’m trying to figure out if I could fit weewx into a smaller form factor than
Pi - something like a Particle.io board.
Could one of our RPi users post back some system stats when weewx is running
“full tilt”?
--
You received this message because you are subscribed to the Google Groups
"weewx-
28 matches
Mail list logo