Re: [weewx-user] No /dev/ttyUSB0

. After getting the new raspberry 3 B set up and configured to boot from hard drive, run NUT, and configured as a RealVNC server, installing and getting weewx running and talking to my station was really straightforward! Thanks so much for awesome software, documentation, and support! --

Re: [weewx-user] No /dev/ttyUSB0

Thank you for being so responsive and tolerant! Will start work on rpi 3 tomorrow. I found a YouTube video by a guy running weewx on rpi 3 so am hopeful. The Azulle had to have a custom build of ubuntu because of other driver issues, like wifi. I suspect this is just one more of its

Re: [weewx-user] No /dev/ttyUSB0

I don't know about the RPi 3, but I just checked an RPi B+, running wheezy on kernel 4.1.19+, and it had the cp210x module. Odds are the RPI3 will have it. -tk On Sun, Sep 17, 2017 at 1:14 PM, Joe Percival wrote: > Will the raspberry pi 3 work? > This is not the first

Re: [weewx-user] No /dev/ttyUSB0

Will the raspberry pi 3 work? This is not the first major problem ive had with tha byte plus -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] No /dev/ttyUSB0

When I disconnect the vantage, reconnect it, and then do dmesg I get: USB disconnect, device number 10 new full-speed USB device number 11 using xhci_hcd Every time I disconnect and reconnect, the device number increments -- You received this message because you are subscribed to the Google

Re: [weewx-user] No /dev/ttyUSB0

I'm surprised. My version of Ubuntu 16.04 comes with the cp210x module: $ *find /lib/modules -type f -name "*.ko"|grep cp210x* /lib/modules/4.4.0-93-generic/kernel/drivers/usb/serial/cp210x.ko /lib/modules/4.4.0-92-generic/kernel/drivers/usb/serial/cp210x.ko Perhaps they don't offer it for the

Re: [weewx-user] No /dev/ttyUSB0

They only have files for Linux kernels 2.x and 3.x. Ubuntu 16.04 uses kernel version 4.4  -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] No /dev/ttyUSB0

Nothing came back from the find command -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit

Re: [weewx-user] No /dev/ttyUSB0

Oh, and if the module is not on your system, then try to download from the chip manufacturer . -tk On Sun, Sep 17, 2017 at 12:25 PM, Thomas Keffer wrote: > The command lsusb will tell

Re: [weewx-user] No /dev/ttyUSB0

The command lsusb will tell you what devices are on the bus, but it will not tell you which port (if any) they have been mapped to. Sounds like the cp210x driver module is not getting loaded or does not exist on your system. It's the driver needed for a USB device on the bus to be treated as a

Re: [weewx-user] No /dev/ttyUSB0

Oh, and when I do a lsusb -t the driver for this connection is empty. On Sunday, September 17, 2017 at 12:00:07 PM UTC-7, Joe Percival wrote: > > I don't see anything like that. Could this be a clue? > When I did a lsusb the vantage connection indicates that it is a cp210x > UART bridge. >

Re: [weewx-user] No /dev/ttyUSB0

Not osmosis... lsmod  -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit

Re: [weewx-user] No /dev/ttyUSB0

I'm about ready to give up on this box and go with the well known rasberry pi 3. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] No /dev/ttyUSB0

I don't see anything like that. Could this be a clue? When I did a lsusb the vantage connection indicates that it is a cp210x UART bridge. When I do a osmosis, cp210x is not listed. Usbserial is also missing. Does this mean that the build that came with my machine is incompatible? -- You

Re: [weewx-user] No /dev/ttyUSB0

Plug the station in, then try the command dmesg. It will show the port the USB device was attached to. Should look something like: [20065.643632] usb 2-2: new full-speed USB device number 7 using xhci_hcd [20065.772251] usb 2-2: New USB device found, idVendor=05ad, idProduct=0fba [20065.772257]

[weewx-user] No /dev/ttyUSB0

Trying to check connection to vantage pro 2 USB but I have no file /dev/ttyUSB0, nor anything similar. I'm running ubuntu 16.04 LTS on an Azulle Byte Plus. Station is on and plugged into the USB 2.0 port and some other things are plugged into a hub on one of the USB 3.0 ports. Any idea what I