I'm running version 0.7 of the SDR driver with an Acurite 2032c outdoor
sensor. When I run the driver stand-alone, I see the rainfall amount,
although it is not being parsed. Here is the output of the driver running
directly:
out: ['wind speed: 1 kph, wind direction: 135.0\xc2\xb0, rain gauge:
After a lot of trial and error I've managed to replicate the calls
WeatherSmart makes to the device and can pull data, at least in .NET. My
Python is somewhat rusty so porting this into WeeWx might be a challenge,
if anyone is interested I can supply the information and be a guinea pig.
On
Sorry for the deletion. I had posted a bad config.
Thanks for the answer.
On Saturday, September 24, 2016 at 7:24:39 PM UTC-7, Tom Keffer wrote:
>
> Hello, Terry
>
> Again, weewx does not actually send rain rate to the WU. It sends the
> total amount of rain that fell during the last 60
Hi,
Is anybody interested in chatting about weewx and other things
weather-related on IRC? I set up #weewx on Freenode; come join me if
you're interested.
You can connect to irc.freenode.net with any IRC client or use their
web-based one: https://webchat.freenode.net/
Chris NW5W
--
You
matt,
I understand the service a bit better. I tried setting weewx.conf to make
the separate database, which worked. I have reset it to save to the weewx
database now. I checked the lightning database and saw a couple "strikes",
but they didn't show up in the weewx database. I am pretty sure
On Monday, September 26, 2016 at 6:20:38 PM UTC-4, Lloyd Kinsella wrote:
>
> After a lot of trial and error I've managed to replicate the calls
> WeatherSmart makes to the device and can pull data, at least in .NET. My
> Python is somewhat rusty so porting this into WeeWx might be a challenge,
That worked! Thank you so much! I got this:
pi@weatherstationpizero:~ $ sudo PYTHONPATH=/usr/share/weewx python
/usr/share/weewx/user/sdr.py --cmd='rtl_433 -R 39 -f 433919000'
out: []
unparsed: []
out: []
unparsed: []
out: []
unparsed: []
out: []
unparsed: []
out: ['2016-09-26 18:59:04 Acurite
