[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Marc Aubry
Hi, Thanks to both of you matthew and andrew for your help. i agree with you about a problem of usb communication between the weather station and the rpi due to whatever unknown yet factor (probably dirty power?) I'll try the following in order to track this problem: 1st. i will connect both the

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread mwall
marc, the old fine offset stations are very sensitive to usb voltage, whether or not the station is powered by the usb. perhaps the wh23xx consoles are sensitive as well. in my short (1 year) experience with the wh23xx hardware, i find it to be considerably more robust than the 1080/2080 fine

Re: [weewx-user] Help with Apache

2017-01-17 Thread Glenn McKechnie
If it worked, there will be a symlink installed into /etc/apache2/conf-enabled which points to that conf file weewx.conf -> /etc/apache2/conf-available/weewx.conf Looking in the tarball ( weewx-3.6.2.tar.gz ), there's an apache weewx.conf file under /weewx-3.6.2/util/apache/conf.d/ Alias /weewx

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
I'm going to have to leave this to Matthew I'm afraid. You definitely appear to have a communication issue with the weather station (READ failure) which occurs at 03:58 approximately, and there are several restarts of weewx which are automatically attempted by weewx. As to the cause of the in

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread Steve
My radiation monitor is a model D from here http://www.uradmonitor.com/ as well as the unit reporting to the global map, I have a cron job that runs every 5 minutes that grabs the data from the unit and writes it to a MySQL database. I still use the bridge with the WeatherSleuth but WeeWx gets

Re: [weewx-user] Help with Apache

2017-01-17 Thread Jerry Simonowits
Thanks Glenn, that was a typo ... I did find it , seemed to work but the Apache server is still not serving the page. Jerry - "Defeat lasts one day, giving up lasts a lifetime." > On Jan 17, 2017, at 8:19 PM, Glenn McKechnie > wrote: > > a2enconf - not - a2ecinf > > It comes packaged with

Re: [weewx-user] Help with Apache

2017-01-17 Thread Jerry Simonowits
i found the command in /use/sbin But still no luck displaying the pages via Apache - "Defeat lasts one day, giving up lasts a lifetime." > On Jan 15, 2017, at 5:22 PM, Glenn McKechnie > wrote: > > Hi Jerry, > > As the root user. > copy that file into /etc/apache2/conf-available, so that yo

Re: [weewx-user] Help with Apache

2017-01-17 Thread Glenn McKechnie
a2enconf - not - a2ecinf It comes packaged with apache2 and lives at /usr/sbin/a2enconf Cheers Glenn rorpi - read only raspberry pi + weewx: now with scripts On 18 January 2017 at 12:00, Jerry Simonowits wrote: > The system could not fin

Re: [weewx-user] Help with Apache

2017-01-17 Thread Jerry Simonowits
The system could not find the a2ecinf command. Jerry - "Defeat lasts one day, giving up lasts a lifetime." > On Jan 15, 2017, at 5:22 PM, Glenn McKechnie > wrote: > > then run the command... > a2enconf weewx.conf -- You received this message because you are subscribed to the Google Group

Re: [weewx-user] Re: Error charts update

2017-01-17 Thread Thomas Keffer
According to the screenshot of the log you posted, the Cheetah generator is looking for a template called "data.txt.tmpl". I have no idea what that template could be --- it is not part of the standard weewx distribution and it is not mentioned in the skin configuration file, skin.conf, that you pos

[weewx-user] Re: Error charts update

2017-01-17 Thread aleandro93
ok. Thanks again. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/opt

Re: [weewx-user] Re: Error charts update

2017-01-17 Thread Thomas Keffer
Nothing unusual there. Please try running the wee_debug program: *wee_debug --info --output* Then post the file /var/tmp/weewx.debug -tk On Tue, Jan 17, 2017 at 1:24 PM, wrote: > This is the file. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-us

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread ponolan
ramlog is ANOTHER great tip. Many thanks! (very interesting waffle) Another optimised Pi-Weewx installation add-on I use and forgot about earlier: Pulseway Alas, I didn't think to get a Pi compatible electricity monitoring solution; just bought an off the shelf thing

Re: [weewx-user] Re: Error charts update

2017-01-17 Thread Thomas Keffer
Please post the file /etc/weewx/skins/Standard/skin.conf. -tk On Tue, Jan 17, 2017 at 12:11 PM, wrote: > I don't resolved the problem. Can you explain me how to resolve it please? > Thanks for the support. > > -- > You received this message because you are subscribed to the Google Groups > "wee

[weewx-user] Re: Error charts update

2017-01-17 Thread aleandro93
I don't resolved the problem. Can you explain me how to resolve it please? Thanks for the support. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsu

Re: [weewx-user] Weewx does't upload the Data online

2017-01-17 Thread Thomas Keffer
Filippo, You must send the logs *from the initial weewx startup*. You are missing some of the early entries. They will have key clues such as which weewx.conf you are using. My suspicion is that you are editing a different weewx.conf than the one that weewx is actually using. If you do not know h

Re: [weewx-user] Re: Weewx, R.Pi and Vantage Pro 2

2017-01-17 Thread Robert Mantel
You mean the if I add to the label_map in weewx.conf the line: timestamp (from my phant server)=dateTime it will use this timestamp in the weewx database instead of the generated one? On Tuesday, 17 January 2017 09:24:29 UTC-5, Tom Keffer wrote: > > > > On Tue, Jan 17, 2017 at 6:03 AM, Robert

Re: [weewx-user] Weewx does't upload the Data online

2017-01-17 Thread Filippo Santello
Hello Tom, here below the messages pi@raspberrypi:~ $ sudo tail -f /var/log/syslog Jan 17 18:58:29 raspberrypi weewx[8583]: manager: Daily summaries up to date Jan 17 18:58:30 raspberrypi weewx[8583]: restx: StationRegistry: Registration not requested. Jan 17 18:58:30 raspberrypi weewx[8583]: res

[weewx-user] Re: Error charts update

2017-01-17 Thread Andrew Milner
Since the log clearly shows an error is being detected by cheetah posting the output from wee_debug would help as you have something incorrect in either weewx.conf or skin.conf On Tuesday, 17 January 2017 20:04:01 UTC+2, alean...@hotmail.com wrote: > >

[weewx-user] Re: Error charts update

2017-01-17 Thread aleandro93
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receivi

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
. or the cables or the physical location or the proximity of other cables and devices (since I bet the rpi3 is in the same physical space as the failed rpi2 and using the same physical cables to connect to the weather station routed in the same manner around your premises) ..

[weewx-user] Re: Error charts update

2017-01-17 Thread Andrew Milner
And the log?? On Tuesday, 17 January 2017 18:24:35 UTC+2, alean...@hotmail.com wrote: > Ok. In particular the charts don't update time, date and lines. It's stop > since first upload to my web site. http://stazionemeteopce.altervista.org/ > -- You received this message because you are subscr

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Marc Aubry
Remember that i have the exact same problem with a rpi2 instead of the rpi3. So i don't really belive in power issue or rpi hardware problem. The only piece of harware which is the same between the 2 config having the same problem is the weather station itself. So if it is hardware it should com

[weewx-user] Re: Error charts update

2017-01-17 Thread aleandro93
Ok. In particular the charts don't update time, date and lines. It's stop since first upload to my web site. http://stazionemeteopce.altervista.org/ -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving

Re: [weewx-user] Weewx does't upload the Data online

2017-01-17 Thread Thomas Keffer
​Hello, Filippo Set debug=2 in weewx.conf, then restart weewx.​ Wait 10 minutes, then post the log *from the initial startup*. It's important to see the initial weewx start up sequence to see whether it's recognizing your FTP settings. Setting debug=2 (instead of debug=1) will cause weewx to log

[weewx-user] Weewx does't upload the Data online

2017-01-17 Thread Filippo Santello
Hello Everyone, I have installed weewx few days ago on a Raspeberry pi 3b with Rasbian Jessie. My weather station is a Davis Vantage pro 2 with usb datalogger. Weewx is creating well the html page and updates the page every 5 min. I assigned a static IP to the Rasp B and the data are availabl

[weewx-user] Re: Error charts update

2017-01-17 Thread Andrew Milner
If you are asking for some help providing more details of the issues will be required!! What specific problems do you have with the charts?? If the issues are just with some of the charts then the output from wee_debug and the log from startup of weewx until after two or three archive/reporti

Re: [weewx-user] Error charts update

2017-01-17 Thread Thomas Keffer
Post the log. -tk On Tue, Jan 17, 2017 at 8:00 AM, wrote: > Hi to all, > a few days ago i downloaded and perfectly configured weewx for my weather > station (PCE-FWS 20). When i sent the files to my web site i had some > problems. In particular the charts of index.html.tmpl don't update but > e

[weewx-user] Error charts update

2017-01-17 Thread aleandro93
Hi to all, a few days ago i downloaded and perfectly configured weewx for my weather station (PCE-FWS 20). When i sent the files to my web site i had some problems. In particular the charts of index.html.tmpl don't update but everything else yes! Into folder of my pc it's all right, everything i

Re: [weewx-user] Re: Weewx, R.Pi and Vantage Pro 2

2017-01-17 Thread Thomas Keffer
On Tue, Jan 17, 2017 at 6:03 AM, Robert Mantel wrote: > I know this is an old thread but I want to ask you about another possible > solution. I have a Particle Photon based weather station that I have > dumping sensor readings to a phant server I have running on my network. > The phant server ti

Re: [weewx-user] Re: Weewx, R.Pi and Vantage Pro 2

2017-01-17 Thread Robert Mantel
I know this is an old thread but I want to ask you about another possible solution. I have a Particle Photon based weather station that I have dumping sensor readings to a phant server I have running on my network. The phant server timestamps everything in UTC. I can then do a jsonp query wi

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread Andrew Milner
Look under the support tab - top right - on weewx.com On Tuesday, 17 January 2017 14:58:32 UTC+2, pon...@gmail.com wrote: > > Ok, I didn't pay enough attention when I first read that as I use my NAS > as a local timeserver and it's on 24x7 and on a UPS. I'll remove the fake > hwclock. Maybe Weew

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread ponolan
Ok, I didn't pay enough attention when I first read that as I use my NAS as a local timeserver and it's on 24x7 and on a UPS. I'll remove the fake hwclock. Maybe Weewx should recommend it on start up if it knows it's on a Pi without an RTC (if that's possible)? If not, never mind. BTW I think t

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
Marc - I do not know the ins and outs or reasons why - but I do know that the current Raspberry power supplies are 5.1v supply and not the 5v supply they were previously. I can only assume that there is some reason behind this change - especially since power has long been an issue with the RPi

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Marc Aubry
This weather station is not powered by the usb but by it's own 5V power supply(or by internal nimh rechargeable battery) and it draw a little bit less than 200ma if i don't mistake. i just check the syslog and the forecast error does not appear. so maybe i forgot to restart weewx after the modif

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread Andrew Milner
No, the RTC issue is not about extra precision - it is about problems caused when weewx starts up if the rpi does not have the correct time - and many times it takes time for the ntp service to connect and update. Whilst awaiting ntp the rpi is using the fakehwclock - which can confuse weewx.

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
Raspberry changed to a 5.1v from 5v supply for the rpi3, and the network and usb radio for the weatherstation probably use more than keyboard/mouse anyway!! Did you check forecast to see if there was another occurrence of the error Matthew found? The error message in the log is the same variab

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Marc Aubry
Maybe i did forgot to restart weewx after the modifications. i will keep you inform if other crashes happen because i have rebooted the rpi since. About the quality of the power provided by the genset it can be the issue, but i'm running on 2 set of generators both of them over rated for my use

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread ponolan
Cool! I use Scootersoftware's Beyond Compare on everything (for me that's Windows 7 & Linux Mint) and knew of Meld as an approximation. Just googled Midnight Commander Meld, found this: https://vasilegabriel.github.io/midnight-commander-diff-files-and-folders/ Will definitely be putting that o

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread ponolan
Forgot about Samba, I use nfscommon to connect to a mapped share installed via /etc/fstab on my NAS (Synology); that's where my backups live. You're not running any other *nix systems? I use a local NTP server. Have never had any problem with Pi getting wrong time. Is this might-as-well precis

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Marc Aubry
Hi there is only the weatherstation running on the rpi usb. The other system you are referring are running on other rpi. this one is dedicated to weewx only. there is no other usb device connected on it. , no keyboard, no screen, simple headless rpi without any other software installed on it exce

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-17 Thread ponolan
vncserver I use already but screen is new, thanks for the tip (I thought I would get some tips). -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubs

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
Are you certain you applied the changes? The log still shows the error Matthew corrected occurred just around the time it stopped reporting and The log started to give the error that should have been cleared by my change. However - the I/O error you got from the USB does imply a USB error situ