[weewx-user] Re: Oregon UV sensor UVN800 data ?

I just read yesterday the wiki about this owfs that can be used as a driver or a service. it is writtent there that it can be used as service to add extra data to a station. (with 1-wire sensors) There must be a way to integrate your sensor to Weewx, but it may require a bit of programming

[weewx-user] Re: Oregon UV sensor UVN800 data ?

That's a very insteresting news !! Mine seems also twice too high ! it may be only a calibration issue then (I mean adding a 0.5 factor in weewx config.). Did you had a change to compare weewx UV index vs your station display? Le mardi 14 février 2017 03:57:56 UTC+1, Markus Roth a écrit : > >

[weewx-user] Re: extraBattery Status for extra sensor

On Monday, February 13, 2017 at 3:41:27 PM UTC-5, Mic G77 wrote: > > I've done what you ask. This is what I get with my sensor n°2: >> >> >> you'll have to run it again, as i gave you incorrect instructions. the debug_raw should be debug_packets_raw: debug = 1 [WMR200] ...

[weewx-user] Re: Oregon UV sensor UVN800 data ?

Next, I've ordered more accurate UV and Lux sensors (Digital)for the Raspberry. Unfortunately, there is no support from weewx yet. And I can not program it. Am Dienstag, 14. Februar 2017 03:57:56 UTC+1 schrieb Markus Roth: > > > At i have try 2 and they are after a half a year Defekt. They

[weewx-user] Re: Oregon UV sensor UVN800 data ?

At i have try 2 and they are after a half a year Defekt. They send no UV value. Alyways 0 zero UV. Then i have send oregon scientific a Mail and they send me for free a new one. And that works oder more than 2 Years and i have no problems. Only the value is to high. Twice as high as the real

[weewx-user] Re: Oregon UV sensor UVN800 data ?

At i have try 2 and they are after a half a year Defekt. They send no UV value. Alyways 0 zero UV. Then i have send oregon scientific a Mail and they send me for free a new one. And that works oder more than 2 Years and i have no problems. Am Montag, 13. Februar 2017 07:24:56 UTC+1 schrieb

[weewx-user] Re: Beta of Version 3.7.0 is available

Is there a Weewx News Letter ? That i need. I need a automatically Mail when is a new Version out. At the moment i watch on the weewx Webside. Am Montag, 13. Februar 2017 14:03:29 UTC+1 schrieb Ruben Navarro Huedo: > > A lot of thank's. > > Please, when deb is available send us a mail here. > > >

Re: [weewx-user] Help debugging alarm.py

Thanks… it’s running ok as a service, but would like to do a bit more debugging… It seemed near the bottom of the module there are some instructions on running stand alone for testing. But if not possible, then will ignore that bit. if __name__ == '__main__': """This section is used for

Re: [weewx-user] Co-opting the RSYNC skin as a backup solution - even better with report_timing

Very clever! -tk On Mon, Feb 13, 2017 at 3:35 PM, Glenn McKechnie wrote: > > In looking for a backup solution for the weewx sqlite databases, I found > one in the most unlikely of places - weewx. :-) > > Because the read only pi >

Re: [weewx-user] Help debugging alarm.py

The "alarm" example is intended to be run as a service within weewx. The assignment to "None" only happens if you try to run alarm as a standalone program. Follow the instructions at the top of the file alarm.py. It will cause weewx to load it and run it as a service. -tk On Mon, Feb 13, 2017

[weewx-user] extraTemp1 units wrong

Trying to use an Acurite Lightning Sensor in my greenhouse as extraTemp1. I changed all of .tmpl files from “Pond” to Grenhouse (did not change the var names) and the graph/texts are showing up fine; BUT., the units are wrong. The sensor is reporting degrees F; but somewhere BEFORE it

[weewx-user] wind gust direction

Hi all, I am using weewx v3.6.2 with a vantage pro2 and want to extend the standard skin index template with some reports from the last 60 minutes. I used $span($time_delta=3600).windGust.max for the max. wind gust and this seems to work fine. However, I also want to get the direction of that

[weewx-user] Co-opting the RSYNC skin as a backup solution - even better with report_timing

In looking for a backup solution for the weewx sqlite databases, I found one in the most unlikely of places - weewx. :-) Because the read only pi I bang on about can (optionally) keep the database in its own ramfs, there

Re: [weewx-user] Re: need help for the first run of weewx

You need to have something like this altitude = 365, foot# Choose 'foot' or 'meter' for unit Dave-KB1PVH Sent from my Galaxy S7 On Feb 13, 2017 5:15 PM, "'Jörg Klein' via weewx-user" < weewx-user@googlegroups.com> wrote: > Hi Dave, > > > i didn't find the entry "measurment" in the conf

Re: [weewx-user] Re: need help for the first run of weewx

Hi Dave, i didn't find the entry "measurment" in the conf file !? Am Montag, 13. Februar 2017 22:29:02 UTC+1 schrieb Dave Webb: > > You also need to put the unit of measurement either foot or meter. > > Dave-KB1PVH > > > Sent from my Galaxy S7 > > On Feb 13, 2017 4:25 PM, "'Jörg Klein' via

[weewx-user] Help debugging alarm.py

Hi trying to test Alarm.py (version = 3.6.2) I cannot seem to get this running.. it does not like that the "engine" is set to None on line 209 in alarm.py, how can I get this working? >engine = None alarm = MyAlarm(engine, config_dict) Here is the traceback:

Re: [weewx-user] Re: need help for the first run of weewx

On Monday, February 13, 2017 at 1:29:02 PM UTC-8, Dave Webb wrote: > > You also need to put the unit of measurement either foot or meter. > > Agree. It should look something like: altitude = 365, foot# Choose 'foot' or 'meter' for unit -- You received this message because you are

Re: [weewx-user] Re: need help for the first run of weewx

You also need to put the unit of measurement either foot or meter. Dave-KB1PVH Sent from my Galaxy S7 On Feb 13, 2017 4:25 PM, "'Jörg Klein' via weewx-user" < weewx-user@googlegroups.com> wrote: > no dave ... set up the altitude to "altitude=34" and get the same errors. > > > Am Montag, 13.

[weewx-user] Re: extraBattery Status for extra sensor

I've done what you ask. This is what I get with my sensor n°2: 1/ with battery at normal status: Feb 13 21:08:20 petitpc-dot-s weewx[831]: wmr200: MainThread: D genLoop() phase getting live packets Feb 13 21:08:28 petitpc-dot-s weewx[831]: wmr200: MainThread: D Temperature id:2 17.7 C trend:

[weewx-user] Re: need help for the first run of weewx

On Monday, February 13, 2017 at 11:55:52 AM UTC-8, Jörg Klein wrote: > > at first i have to say ... this is my first raspberry and the first time i > see linux - please don't smile ;) > my first steps are very good ... my raspberry doing what i want and i > installed weewx and edit the

[weewx-user] need help for the first run of weewx

at first i have to say ... this is my first raspberry and the first time i see linux - please don't smile ;) my first steps are very good ... my raspberry doing what i want and i installed weewx and edit the weewx.conf file as good as i can but if i start weewx i get some errors you can see it

Re: [weewx-user] Re: No data from station

Hi m, Don't have access to the station at weekdays. Hope I can do it next weekend. Also on another computer to discard a raspi problem. Thanks. On Sunday, February 12, 2017 at 7:53:50 PM UTC+1, mwall wrote: > > miguel, > > please try the attached wmr300-0.18rc4.py > > m > > -- You received

[weewx-user] Re: Live console and uploading to a Website

On Monday, February 13, 2017 at 1:06:30 PM UTC-5, Peter Dougherty wrote: > > I don't even know what questions to start asking about this. I don't run > servers here or know anything about them whatsoever (I'm a very, very > inexperienced user and that's a gross understatement). Is there a "for

[weewx-user] Re: Live console and uploading to a Website

I don't even know what questions to start asking about this. I don't run servers here or know anything about them whatsoever (I'm a very, very inexperienced user and that's a gross understatement). Is there a "for utter morons" guide to setting it up? About all I can do is type in commands as

Re: [weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

That could work. With this thinking, we could even do away with the report generator. Instead, image generation and file generation would be separate weewx services. Each would invoke its own FTP session when done. Because the set of generated files are disjoint, there would be no duplicated

Re: [weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

On Monday, February 13, 2017 at 12:19:40 PM UTC-5, Tom Keffer wrote: > > someone should write an rsync and an ftp service that can be bound to >> NEW_LOOP_PACKET. it could use the same code used by the ftp/rsync reports, >> just wrapped in a StdService instead of report generator. >> > ​ > The

Re: [weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

> > someone should write an rsync and an ftp service that can be bound to > NEW_LOOP_PACKET. it could use the same code used by the ftp/rsync reports, > just wrapped in a StdService instead of report generator. > > ​ The problem with this approach is that then you need some sort of lock for the

[weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

On Monday, February 13, 2017 at 11:49:48 AM UTC-5, tempus wrote: > > Has there been more progress on your new custom Service bound to the > NEW_LOOP_PACKET event? It would be great to have even a > partially-functioning beta-version as a stop-gap solution. > bob, you could install the crt

[weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

Has there been more progress on your new custom Service bound to the NEW_LOOP_PACKET event? It would be great to have even a partially-functioning beta-version as a stop-gap solution. Zambretti forecast data doesn't seem important, because those forecasts are so poor compared to forecasts

Re: [weewx-user] Live console and uploading to a Website

Peter, Some of the skins can be found here https://github.com/weewx/weewx/wiki Dave-KB1PVH Sent from my Galaxy S7 On Feb 13, 2017 11:05 AM, "Peter Dougherty" wrote: > Hello all, > > With thanks to Tom and others for solving the first big hurdles in my > recent

Re: [weewx-user] CWOP (MADIS) reporting dew point errors

FWIW, at CWOP station AS817 I am not seeing the same. I have numerous errors from the last couple of days, dew point being the largest. I think this is due to my outdoor sensor now being under the snow :O On Sunday, February 12, 2017 at 12:02:59 AM UTC-5, William Phelps wrote: > > Hello

[weewx-user] Re: Beta of Version 3.7.0 is available

A lot of thank's. Please, when deb is available send us a mail here. El domingo, 12 de febrero de 2017, 10:40:27 (UTC+1), Steve escribió: > > I haven't tried any of the new features and I've never changed my archive > interval, but upgrading from 3.6.2 went without any issues. > > Steve. > >

[weewx-user] Re: Twitter and rain. Is possible total day rain?

Done :-D I am using this tweet shell script: https://github.com/piroor/tweet.sh And i have created a twitter template like this: http://MeteoElche.Es $current.dateTime Temp: $current.outTemp.formatted C Sens: $current.windchill.formatted C Baro: $current.barometer Viento: $current.windSpeed

[weewx-user] Re: Oregon UV sensor UVN800 data ?

Hi and thanks for feedback ! Yes, I know the temis.nl website. I tried to compare history with my measurements: for example, I checked the maps of last summer: http://www.temis.nl/uvradiation/SCIA/uvief.php?Year=2016=08=12 On the world map, you can see that Europe (as well as USA) is in the

[weewx-user] Re: Twitter and rain. Is possible total day rain?

Yes, that could work. A bit more effort required but that's a good bit of lateral thinking to work around the problem. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send

[weewx-user] Re: Twitter and rain. Is possible total day rain?

I think i can use some bash script to tweet and then i can import total data from a template. El lunes, 13 de febrero de 2017, 11:44:35 (UTC+1), Ruben Navarro Huedo escribió: > > A lot of thank's for your answer. > > El lunes, 13 de febrero de 2017, 11:29:06 (UTC+1), gjr80 escribió: >> >>

[weewx-user] Re: Twitter and rain. Is possible total day rain?

A lot of thank's for your answer. El lunes, 13 de febrero de 2017, 11:29:06 (UTC+1), gjr80 escribió: > > Looking at the ws28xx driver it only emits rain, so unfortunately you > won't be able to tweet the days total rainfall. > > Gary > -- You received this message because you are subscribed to