I have the same setup. I did not add anything to weewx.conf. All I did was
tell the envoy what ID 2 was in the envoy setup. Once I set ID 2 to anemometer
the wind data showed up. My assumption is once the envoy knows that ID2 is
wind it sends the appropriate data via the logger. Tom is
Just the separate anemometer. I believe most folks (me) want to remote mount
the anemometer to get better wind readings so you buy the transmitter and then
plug your existing anemometer to the transmitter and mount ti somewhere. The
transmitters are standard and can be used with many
Anyone?
> On Oct 26, 2023, at 8:24 AM, Tom -KQ5S wrote:
>
> I am getting the following error from time to time. Rsync will work fine for
> a while and then I get the error. I might get the error for a couple of
> cycles then it will work again, then the error again. I have included the
I’m using the standard 5 minute interval. The files being uploaded are the
files generated by the standard and seasons report and the Saratoga extension.
As you can see the upload takes less than 2 seconds. When I was using ftp to
upload I was getting errors due to the time it took. Rsync
