Re: [weewx-user] Sunshine Duration

@Jacques: I now added your extension to the configuration. The calculated values will be stored to the database. After some time I will publish the readings here. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group

Re: [weewx-user] Wlink doesn't run

Justin Wenk schrieb am Samstag, 18. Mai 2024 um 21:25:35 UTC+2: short update: I have now finally installed this extension https://github.com/WernerKr/davisconsoleapi. Now runs stable via the weatherlink.com API V2. API V1 is not supported by the Davis console 6313 - that's why it didn't work

Re: [weewx-user] Your hardware experience (for running WeeWX, the service)

Gábor Szabados schrieb am Freitag, 17. Mai 2024 um 16:51:21 UTC+2: Where did you get those values from? - https://www.netzfrequenz.info/aktuelle-netzfrequenz-full - https://www.mainsfrequency.com - https://www.udo-leuschner.de/basiswissen/SB124-04.htm (german only) Before 1990,

Re: [weewx-user] Your hardware experience (for running WeeWX, the service)

michael.k...@gmx.at schrieb am Donnerstag, 16. Mai 2024 um 18:57:09 UTC+2: Gauß would connect to your power grid :D You know what Churchill said about statistics? If I do the histogram with 3 decimals as Cameron did I get the maximum at 49.997 Hz. That is almost the same what Cameron got.

Re: [weewx-user] Your hardware experience (for running WeeWX, the service)

Gábor Szabados schrieb am Freitag, 17. Mai 2024 um 14:46:55 UTC+2: As I remember the EU specs is 50Hz +/-1%, so all those look good to me. No. The tolerance is much smaller. +-0.02 Hz (0.04%) is the normal operation range. Up to +-0.2 Hz (0.4%) the European electicity administration uses

Re: [weewx-user] Your hardware experience (for running WeeWX, the service)

michael.k...@gmx.at schrieb am Donnerstag, 16. Mai 2024 um 15:46:28 UTC+2: Since the (public) power grid is part of the hardware your local weewx installation is running on, this is far from being off-topic. There are 3 types of UPS available: off-line, stand-by, and on-line. The first one

Re: [weewx-user] Wlink doesn't run

If the PC running WeeWX and the Weatherlink device is on the same network, you could try to retrieve data directly from the device instead of fetching it from weatherlink.com. You may want to try the WeatherLinkLiveUDP driver for this. Or

Re: [weewx-user] Sunshine Duration

Oh, that are very interesting data. Jacques Terrettaz schrieb am Montag, 13. Mai 2024 um 18:36:27 UTC+2: Globally the data derived from the formula give a higher sunshine duration. We cannot expect to get the same values from that different measurement principles, I guess. Nevertheless,

Re: [weewx-user] Sunshine Duration

Jacques Terrettaz schrieb am Montag, 13. Mai 2024 um 09:29:49 UTC+2: .. only one estimation for a 5 min period, based of the archive radiation measurement , which is the mean radiation measured over of archive period . Unfortunately I cannot provide the raw sensor readings. We do not save

Re: [weewx-user] Sunshine Duration

jterr...@gmail.com schrieb am Freitag, 10. Mai 2024 um 20:35:20 UTC+2: One more question : in your csv file, the maximum values of the sunshine duration measured by the Weerhuisje/Instromet sunshine duration sensor , for a period of 5 minutes, are 324 seconds , higher than the 300 seconds

Re: [weewx-user] Sunshine Duration

jterr...@gmail.com schrieb am Freitag, 10. Mai 2024 um 19:49:06 UTC+2: Karen, thanks. I will do the calculation, and let you know. It will be interesting to have a comparison , but I need some more information , particularly the latitude and longitude of the place where your sensors are

Re: [weewx-user] Sunshine Duration

Jacques Terrettaz schrieb am Dienstag, 7. Mai 2024 um 13:07:08 UTC+2: The term "sunshine" and "sunshine duration" is the one used by WMO - see https://library.wmo.int/viewer/68695/?offset=#page=331=picture=bookmark=0= . And this link reads: "According to WMO (2010), sunshine duration during

Re: [weewx-user] Sunshine Duration

Ton vanN schrieb am Dienstag, 7. Mai 2024 um 11:02:33 UTC+2: Rereading this thread come to understand that definition/semantics is a critical aspect in this discussion. *Bluntly* summarized: - Sunshine = seeing difference between lighted area and shadowed area. Like KarenK's device is doing -

Re: [weewx-user] Sunshine Duration

n7uv...@gmail.com schrieb am Samstag, 4. Mai 2024 um 05:12:04 UTC+2: What is "direct solar irradiance"? Is there someone at the sensor deciding that it's direct? As Jaques wrote, this is a sensor that sees a very small angle of the sky (approximately half a degree) and it is moving and

Re: [weewx-user] Sunshine Duration

is within x% > of the expected image of the sun taken above the atmosphere, that would be > a useful instrument. > > Sunny days and sunshine duration appear to be a matter of opinion. > > Cheers - Jon N7UV > On Thursday, May 2, 2024 at 12:03:15 AM UTC-7 Karen K wrote: > >&g

Re: [weewx-user] Sunshine Duration

n7uv...@gmail.com schrieb am Donnerstag, 2. Mai 2024 um 01:01:52 UTC+2: When I hear "sunshine duration", I'm not sure whether that means the duration that the scary fiery (I live in PHX %^) ball of plasma is at and above the horizon (which is already provided under the Celestial tab) [image:

[weewx-user] Re: Can not find: wee_device

christian@gmail.com schrieb am Montag, 22. April 2024 um 12:53:58 UTC+2: Now I have the problem that I can't find wee_device in the system. I searched the whole system but I couldn't find wee_device. What can I do there? http://weewx.com/docs/5.0/utilities/weectl-device/ -- You

Re: [weewx-user] change locale for html.tmpl with weewx 5.0.2

Juan Antonio Mosquera Casais schrieb am Freitag, 12. April 2024 um 07:03:31 UTC+2: Oh... works... but, show units, i can delete units?? Replace .formatted by .format(add_label=False) -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

[weewx-user] Re: "outHumAbs" in microgramms per cube meter on Station info on Belchertown Skin.

mh081...@gmail.com schrieb am Donnerstag, 14. März 2024 um 09:53:53 UTC+1: Can anybody, who already changed this, share his config? In graphs.conf I use it like this: [[humidity]] title = "Luftfeuchtigkeit" [[[outHumidity]]] name = "relativ"

Re: [weewx-user] Fahrenheit instead of celsius in weewx.sdb? / csv export: wrong datetime format

I would suggest to use the SQL statement select datetime(`dateTime`,'unixepoch','localtime'),* from archive; to extract the data out of the database. Please note the different quotes. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

Re: [weewx-user] Difference between aggregation types has_data and not_null

It turned out that this thread was only a step on the way for me. I ended up writing an issue (#939) after all. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop

Re: [weewx-user] Difference between aggregation types has_data and not_null

I guess PR #929 is an entirely different topic. It seams to me, that the if condition in weewx.tags.ObservationBinder.has_data is useless, because what happens afterwards is almost the same in both cases. May be, the intension for that function was like that really: @property def

Re: [weewx-user] Difference between aggregation types has_data and not_null

Ah. Tom Keffer schrieb am Samstag, 24. Februar 2024 um 00:00:07 UTC+1: You should not have to implement either. For WeeWX 5.0 people experienced that the "GTS", "yearGDD", and "seasonGDD" observation types (XTypes calculated out of "outTemp") were not graphed any more. After an explicit

Re: [weewx-user] Difference between aggregation types has_data and not_null

Ah. Tom Keffer schrieb am Samstag, 24. Februar 2024 um 00:00:07 UTC+1: You should not have to implement either. For WeeWX 5.0 people experienced that the "GTS", "yearGDD", and "seasonGDD" observation types (XTypes calculated out of "outTemp") were not graphed any more. After an explicit

[weewx-user] Re: Seeking Data Logging Options

What do you mean by "logging"? WeeWX, as it is shipped, stores the readings to a database. You can then take that database and do what you have to do with it. If you use the default settings, that database is a SQLITE file, which can be read and processed by a lot of other software. -- You

Re: [weewx-user] Difference between aggregation types has_data and not_null

, I don't think it's very useful. I may remove it from the documentation. On Fri, Feb 23, 2024 at 3:48 AM Karen K wrote: What is the difference between the aggregation types has_data and not_null according to the documentation in http://weewx.com/docs/5.0/reference/aggtypes/. -- You received

Re: [weewx-user] Difference between aggregation types has_data and not_null

move it from the > documentation. > > On Fri, Feb 23, 2024 at 3:48 AM Karen K wrote: > >> What is the difference between the aggregation types has_data and >> not_null according to the documentation in >> http://weewx.com/docs/5.0/reference/aggtypes/. >> >> -- &

[weewx-user] Difference between aggregation types has_data and not_null

What is the difference between the aggregation types has_data and not_null according to the documentation in http://weewx.com/docs/5.0/reference/aggtypes/. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop

[weewx-user] Alltime Statistics

I just read a post about slow skin creation in a german weather forum. This made me think about something. There were threads about the same topic here. Sometime the DaySummaryManager was introduced. And I guess the reason was to speed up aggregations. Instead of 288 records a day one record

[weewx-user] Re: Can we upgrade to WeeWX 5.0x WITHOUT MAJOR RISK?

I would suggest creating a backup first. Backups are always a good idea, independent of what you want to do. You will surely beat yourself if you have not created it. This includes a whole copy of the hard disk. -- You received this message because you are subscribed to the Google Groups

[weewx-user] Re: SOLVED as3935 lightining module not detected by I2c on a Rpi4

May be you want to try option -a: sudo i2cdetect -a -y 1 Adresses below 0x8 are reserved at Raspberry Pi 4. But the lightning module can address 0x0, 0x1, 0x2, or 0x3 only. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from

[weewx-user] Re: SOLVED as3935 lightining module not detected by I2c on a Rpi4

May be, you want to try option -a: sudo i2cdetect -a -y 1 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this

[weewx-user] Re: Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

WeeWX 4.* runs as root. WeeWX 5.* does not run as root. As you write the permissions of /dev/ttyAMA0 are user root and group dialout. You may include the user weewx into group dialout or follow the instructions Tom and Matthew gave in several of the previous threads regarding this issue. Mark

[weewx-user] Re: Using radar data provided by the German Weather Service DWD

michael.k...@gmx.at schrieb am Freitag, 12. Januar 2024 um 20:04:50 UTC+1: Würde das auch gerne als Option für den Bootstrap Skin übernehmen. @Michael: Wenn das dann umgesetzt ist, könnte ich einen Link setzen, daß die Leute sehen, daß sie da eine Skin installieren können, die das nutzt. --

[weewx-user] Re: Using radar data provided by the German Weather Service DWD

English version below. Es gibt zu diesem Thema noch etwas Neues: eine Kurzfrist-Niederschlagsvorhersage. Da kann man für die nächsten 2 Stunden im 5-Minuten-Abstand erfahren, ob man einen Platzregen zu gewärtigen hat. Die Radardaten des Deutschen Wetterdienstes enthalten eine solche

Re: [weewx-user] Slow Report Generation after Upgrade from 4.10.2 to 5..0

@Tom: May be, you want to have a look into the belchertown.py file. It contains a lot of SQL queries, that do not use the normal way to access the WeeWX database. They are used to get several alltime statistics and other aggregations. Could there be some reason? -- You received this message

[weewx-user] Re: Using radar data provided by the German Weather Service DWD

Noch kommt hier relativ schnell etwas hinzu. Kartenausschnitte zeigten die Ortsnamen ziemlich pixelig. Das hat sich jetzt verbessert. Es werden auch mehr Orte angezeigt, wenn der Ausschnitt kleiner ist. Damit man die Grenzen nicht so mühsam in Pixeln heraussuchen muß, kann man jetzt beim

Re: [weewx-user] V5.0.0 available

Congratulations from me, too. It is a lot of work to design, to discuss, to code, and finally to test and find the bugs. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an

[weewx-user] Re: Using radar data provided by the German Weather Service DWD

hesf...@gmail.com schrieb am Sonntag, 14. Januar 2024 um 12:49:44 UTC+1: und die Datei "radar-HG.png" wird erzeugt, jedoch ohne die Landegrenzen. Bitte die Datei countrycoords.txt vorerst hier herunterladen: https://www.woellsdorf-wetter.de/dwd/countrycoords.txt P.S.: Auch "WN" und "RV"

[weewx-user] Re: Using radar data provided by the German Weather Service DWD

Und hier haben wir dann Anfänge einer Anleitung . -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: Using radar data provided by the German Weather Service DWD

Darstellung der Farblegende: #from user.weatherservicesradar import DwdRadar ... #for $idx,$val in $DwdRadar.TEXT['de'].items() $val #end for Und in einer CSS-Datei: *.statusIcon* {

[weewx-user] Re: Using radar data provided by the German Weather Service DWD

michael.k...@gmx.at schrieb am Freitag, 12. Januar 2024 um 20:04:50 UTC+1: Hört sich nach einem Geniestreich an. Da sich mein Standort in Österreich noch in dem Ausschnitt der Karte befindet, melde ich mein Interesse an. Würde das auch gerne als Option für den Bootstrap Skin übernehmen. Das

[weewx-user] Report thread freezes after weewx.conf change

Please note: This is not reproducable. The only question is, if someones knows about threading issues in Python, that may produce such behavior. So don't ask about the log etc. I explain it below why. It happened while I wrote an extension. I added some entries at the end of weewx.conf. They

[weewx-user] Re: RS485 Pyranometer and Weewx

I have got another device that uses an RS485 interface. I use an RS485 to LAN converter from W . It depends on the protocol they use, but may be the MQTTSubscribe driver/service can read the data

[weewx-user] Belchertown skin: Snapshot section layout and customization issues

I am not sure, if it is possible to recognize new issues within the discussion tab at Github. So I put a link here: Snapshot section layout and customization issues #921 There I present a proposal to handle layout issues with the

[weewx-user] Re: Customizable timespan tags in Cheetah

; > https://github.com/brewster76/fuzzy-archer/blob/0cba62f9e59a883699986478a694f19144bee61e/skins/Bootstrap/stats.html.tmpl#L66C92-L66C96 > > Karen K schrieb am Sonntag, 31. Dezember 2023 um 15:51:29 UTC+1: > >> If I want to make a skin customizable I can use $getVar()

[weewx-user] Customizable timespan tags in Cheetah

If I want to make a skin customizable I can use $getVar(). So instead of writing $day.radiation.max I can write #set $obs = 'day.radiation.max' ... $getVar($obs) But how to do that with other bindings than the standard binding? I tried #set $obs = 'day(data_binding="xyz_binding").xyz.max'

Re: [weewx-user] Storm!

One could think it was somewhere near the sea. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on

[weewx-user] Re: Storm!

Oh. Horrible readings. We had half of that only, and it felt dangerous. michael.k...@gmx.at schrieb am Samstag, 23. Dezember 2023 um 06:56:14 UTC+1: > The neighbors roof is half gone, parts of my pv went flying, one rain > gauge is in a yet undefined state, my wind mast is banked at 30°,

[weewx-user] Re: weewx - mariadb high read and cpu utilization....

See Issue #25 for explanation and solution. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: weewx - mariadb high read and cpu utilization....

Christian Peters schrieb am Samstag, 16. Dezember 2023 um 21:26:08 UTC+1: Will ask Karen K. I answered the issue with additional information requests. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this grou

[weewx-user] Re: as3935 sensor

https://wiki.dfrobot.com/Gravity%3A%20Lightning%20Sensor%20SKU%3A%20SEN0290 https://botland.de/schwerkraft-stromsensoren/13752-dfrobot-gravity-lightning-sensor-sensor-blitzdetektor-6959420914791.html Claudio schrieb am Montag, 11. Dezember 2023 um 06:58:15 UTC+1: > Thanks Jimi, do you use

Re: [weewx-user] NEW_ACHIVE_RECORD event chronology

Maybe, writing an XTYPE extension instead of a service would be a solution. There you have access to the archive record and you can create new observation types, that can be saved to the database. Jacques Terrettaz schrieb am Mittwoch, 6. Dezember 2023 um 07:16:19 UTC+1: > Thanks. > > Right

Re: [weewx-user] Unrecoverable error "no such table: forecast_day_wind"

Tom Keffer schrieb am Freitag, 17. November 2023 um 14:43:37 UTC+1: I don't know why this is working for Karen, but not Michael. In any case, try this version of xtypes.py. It explicitly tests whether a daily summary is available when calculating wind vectors. I guess, because I do not plot

[weewx-user] Re: Matthew Wall's Lightning service extension and variable names

See PR https://github.com/matthewwall/weewx-as3935/pull/2 please. matthew wall schrieb am Freitag, 17. November 2023 um 00:21:07 UTC+1: > On Thursday, November 16, 2023 at 2:42:43 PM UTC-5 kk44...@gmail.com > wrote: > > There is an extension >

Re: [weewx-user] Unrecoverable error "no such table: forecast_day_wind"

@Tom Keffer: I would like to add that the table dwd-forecast-K2714.sdb is created outside WeeWX by a separate program. It creates the core table only, no daily summaries. That is the reason, weewx.manager.Manager is used. I use it myself, and I never got an error message like that the thread

[weewx-user] Matthew Wall's Lightning service extension and variable names

There is an extension available created by Matthew Wall and reading the AS3935 lightning detector circuit. It sets 2 observation types: - avg_distance - lightning_strikes In contrary to that, the wview_extended schema as well as units.py in

[weewx-user] Weather related icons in WeeWX skins / Wettersymbole in WeeWX-Skins

I guess I did not inform about the extension that provides the $presentweather() tag to display weather related icons and symbols in WeeWX skins by now. Different symbol sets are supported. And I recently updated the documentation. So this may be a reason to inform now. Ich glaube, ich habe an

[weewx-user] Page not found or empty

Despite uploading a HTML file by FTP takes a very short time only, I experience an HTML error or empty or incomplete page surprisingly often. And the Google and Ahrefs crawlers report such problems, too. Unfortunately, FTP does not behave like Linux, where it is possible to replace one file by

Re: [weewx-user] Re: xtype tag

And according to units.py the observation type wetbulb temperature is called outWetbulb and not wetbulb_t. Consider that in MQTT output the underscore is used to separate the observation type name from the unit name. Tom Keffer schrieb am Sonntag, 29. Oktober 2023 um 12:23:38 UTC+1: > If you

Re: [weewx-user] WeeWX in an RV?

Stefan Gliessmann schrieb am Samstag, 28. Oktober 2023 um 14:53:30 UTC+2: How can I change the use of latitude & longitude from the stanze [Station] to current values from the weewx.sdb $latitude and $longitude for weather forecasting? I want to use the most current poisition for forecasting

[weewx-user] Re: time tagging images in index.html

Sorry Karen K schrieb am Donnerstag, 26. Oktober 2023 um 18:58:29 UTC+2: > If it is a browser caching issue you can add ?v=$current.dateTime to all > the image references. In your example: > > > > cric...@pobox.com schrieb am Donnerstag, 26. Oktober 2023 um 15:53:21 >

[weewx-user] Re: time tagging images in index.html

is > On Thursday, October 26, 2023 at 5:39:08 AM UTC-6 Karen K wrote: > >> May be, the plot image files were not updated because newer versions of >> it exist. Have you checked the file date/time of the PNG files? >> >> vince schrieb am Mittwoch, 25. Oktober 2023 um 2

[weewx-user] Re: time tagging images in index.html

May be, the plot image files were not updated because newer versions of it exist. Have you checked the file date/time of the PNG files? vince schrieb am Mittwoch, 25. Oktober 2023 um 23:06:54 UTC+2: > Sorry - no help here. I've had webcam snapshot images that are uploaded > periodically by

Re: [weewx-user] Adding climatologies to plots?

You can copy the NOAA data into a SQLITE database file. Make sure, the timestamp column is called `dateTime` and there is a column `interval` for the time interval and a column `usUnits` that contains 1 for US units. After that you can reference this file in weewx.conf as a binding and use it

[weewx-user] Re: Cloud base calculation formula in Weewx

Remy Lavabre schrieb am Montag, 23. Oktober 2023 um 18:07:30 UTC+2: Would it be possible to know the WeeWX calculation formula used to obtain the height of the cloud base in weewx from the outside temperature and the dew point? It is Henning's formula, that is used. -- You received this

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

subfolders to get a correct href. Local test PC: Debian Bookworm, Weewx 4.10.2 Karen K schrieb am Sonntag, 15. Oktober 2023 um 16:28:54 UTC+2: Lorin Tremblay schrieb am Sonntag, 15. Oktober 2023 um 16:06:18 UTC+2: You want to provide your settings? I did not set anything. I installe

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

Lorin Tremblay schrieb am Sonntag, 15. Oktober 2023 um 16:06:18 UTC+2: You want to provide your settings? I did not set anything. I installed CairoSVG, and that is it. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this

Re: [weewx-user] New Timespan $daylight for the time while sun is up

Dann bitte Version 1.3 benutzen. Meteo Oberwallis schrieb am Sonntag, 15. Oktober 2023 um 12:46:46 UTC+2: > Hallo. > > Ich habe die: > > >- Programm version: 4.10.2 >- Skin Version: 1.2 > > > Gruss > > Karen K schrieb am Sonntag, 15. Oktober

[weewx-user] Re: weewx-GTS: print outHumAbs in right format....?

You can also set a different unit within the image configuration in skin.conf. See Changing_the_unit_used_in_a_plot for details. Michael schrieb am Sonntag, 15. Oktober 2023 um 14:38:36 UTC+2: > Hi Christian, > > a part

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

# file name without extension (optional) > file = /var/www/html/weewx/webcam/snap > # image width in pixels (optional) > #width = replace_me > # image height in pixels (optional) > #height = replace_me > > Location of my webcam Image >

Re: [weewx-user] New Timespan $daylight for the time while sun is up

Temperaturdiagramm mal testweise nach demselben Prinzip in graphs.conf die Werte in Grad Fahrenheit anzeigen lassen. Meteo Oberwallis schrieb am Sonntag, 15. Oktober 2023 um 09:40:04 UTC+2: > Hallo Karen. > > Genau so habe ich es. Trotzdem habe ich diese dezimalstellenfehler. > > Gr

Re: [weewx-user] New Timespan $daylight for the time while sun is up

decimals = 1 Meteo Oberwallis schrieb am Samstag, 14. Oktober 2023 um 12:03:33 UTC+2: > Hallo. > Bei mir wird unter Belchertown bei der Absoluten Luftfeuchtugkeit ein zu > grosser Wert angezeigt. Wie kann ich das anpassen? > [image: 2023_10_14_12_01_34_Clipboard.png] &

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

According to what you posted, the file is called snap.jpeg (including character e) and not snap.jpg (without character e). Lorin Tremblay schrieb am Freitag, 13. Oktober 2023 um 20:43:42 UTC+2: > Nothing as changed in my case, still not getting the image, only the > text….. > > > Oct 13

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

t; /var/www/html/weewx/webcam/snap.jpg > > > *pi@Weewx-APRS3695*:*/ $* ls -l /webcam > > ls: cannot access '/webcam': No such file or directory > > *pi@Weewx-APRS3695*:*/ $* > > > > > On 12 Oct 23, at 13:30, Karen K wrote: > > Please, enter ls -l /webc

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

As there is no reply I would like to add something. In this case href="/webcam/snap.jpg" refers to a non-existing file. This is because of the slash at the beginning. I do not know the real location of snap.jpg. So I cannot provide the correct href line. I added a troubleshooting section in

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

3:02:43 Weewx-APRS3695 wee_reports[29176] DEBUG *user.s*vg2png: > /var/www/html/weewx/webcam/snap.svg --> /var/www/html/weewx/webcam/snap.png > > Oct 12 13:02:43 Weewx-APRS3695 wee_reports[29176] INFO *user.s*vg2png: > Created 1 PNG file in 1.52 seconds > > > > > &g

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

Actually I do not see the glue in that. - What says ls -l /webcam ? - you have log_failure = True ? - set debug = 1 in weewx.conf, restart WeeWX and look at the log again. There should be a message containing the file names and paths of the files read and created. - I assume

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

If I try that, I see a message in the syslog that says: Oct 12 15:21:08 weewx[119729] ERROR user.svg2png: URLError Is there a similar message in your case? The message provides the directory where to place the original webcam image. Karen K schrieb am Donnerstag, 12. Oktober 2023 um 10

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

*snap.svg* > > -rwxrwxrwx 1 root root482 Oct 11 15:55 *'#Webcam_FTP.last**’* > > > > > The script is located in /etc/weewx/skins/Belchertown/webcam/snap.svg.tmpl > > I’ve also tried with a copy of my image in the folder of the script > (/etc/weewx/skins/Belchertown/webcam/snap.jp

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

# readings > > Temp:$current.outTemp - > Dir:$current.windDir.ordinal_compass - Speed:$current.windSpeed - > Bar:$current.barometer - Total Rain:$day.rain.sum - $current.pm2_5_aqi > > > > > > On 11 Oct 23, at 08:47, Karen K wrote: > > Could you show your te

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

kin.conf > > > > >- Double check "href="/webcam/snap.jpg"". Are you sure that is >situated in the root directory? May be you want to remove the slash at the >beginning. > > And remove the / so now is reads "href="webcam/snap.jpg&

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

[[[file1]]] > > template = snap.svg.tmpl > > *[Generators]* > > generator_list = weewx.cheetahgenerator.CheetahGenerator, > weewx.reportengine.CopyGenerator, user.belchertown.HighchartsJsonGenerator, > user.svg2png.SVGtoPNGGenerator > > > >

Re: [weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

-svg2png-master/install.py", line 8, in loader > > File "/var/tmp/weewx-svg2png-master/install.py", line 12, in __init__ > > NameError: name 'SNMPInstaller' is not defined > > I personally want to add the weather data to snapshot of my webcam… > > > On 7 Oct 23, at

Re: [weewx-user] Anyone notice a problem with aeris weather API today?

After successful download you find a logging entry like this: Oct 7 08:00:42 XXX weewx[12345] INFO user.*belchertown*: New forecast file downloaded to /var/www/html/weewx/*belchertown*/json/forecast.json So you may want to look into the log starting after midnight. This message should show

[weewx-user] Re: Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

UTC+2: > Awesome! > > I will give it a shoot later and let you know :) > > Thanks in advance for your contributions > > On Tuesday, October 3, 2023 at 4:15:11 PM UTC+2 Karen K wrote: > >> If there is a link in a social media post, sites like Twitter (X), >>

[weewx-user] Re: FTP Upload failed

It connects successfully. Then it says "Transfer aborted". Is it possible that no more memory is available at the web server? buck...@googlemail.com schrieb am Donnerstag, 5. Oktober 2023 um 07:09:43 UTC+2: > hello, since yesterday i get this error and i dont know why > > ftpgenerator: Upload

[weewx-user] Re: Weewx Belchertown Kiosk page

The real reason is, that the Belchertown skin does not obey all the rules of the Bootstrap grid system. And additionally it changes some basic settings within style.css to the worse. Dan Roman schrieb am Dienstag, 3. Oktober 2023 um 18:14:08 UTC+2: > I don't quite understand why the kiosk

[weewx-user] Introducing weewx-svg2png generator for creating thumbnail images and mini-pics in WeeWX

If there is a link in a social media post, sites like Twitter (X), Mastodon and others show a preview image or thumbnail of the linked page. For a long time I wondered how to define that image. Then I found out they look for special "meta" statements within the page header. I included such

[weewx-user] Re: "First Light", working, but with some problems

b) Your should look which service creates those messages. According to your log it ist "StationRegistry". So, what is "post_interval" saying in your weewx.conf? Besides that, if I remember it correctly, station registry is not working actually. Try setting "register_this_station" to "false".

Re: [weewx-user] New Timespan $daylight for the time while sun is up

September 29, 2023 at 9:13:23 PM UTC+3 Karen K wrote: > >> Mks Mk schrieb am Freitag, 29. September 2023 um 19:09:10 UTC+2: >> >> We want to add below code or similar to its action to the NOAA monthly >> report file "*NOAA-%Y-%m.txt.tmpl*" but we do not know

Re: [weewx-user] New Timespan $daylight for the time while sun is up

Mks Mk schrieb am Freitag, 29. September 2023 um 19:09:10 UTC+2: We want to add below code or similar to its action to the NOAA monthly report file "*NOAA-%Y-%m.txt.tmpl*" but we do not know if it is possible to do so because of the span tags? Why not trying it? If you are not sure about

Re: [weewx-user] Re: Database Schema: Signals

Craig Young schrieb am Dienstag, 26. September 2023 um 06:03:11 UTC+2: I inserted this line into my driver: weewx.units.obs_group_dict['signal1'] = 'group_angle' You cannot use group names that you invent on the fly. The group for observation types measured in degrees is group_direction.

[weewx-user] Re: Weather Forecast from Deutscher Wetterdienst (DWD)

Die Vorhersage wurde um die relative Luftfeuchte, den Windchill und den Hitzeindex erweitert. weewx-DWD <https://github.com/roe-dl/weewx-DWD> Karen K schrieb am Donnerstag, 3. Februar 2022 um 21:15:23 UTC+1: > miwa...@googlemail.com schrieb am Donnerstag, 3. Februar 2022 um 17:25:18

Re: [weewx-user] Re: Problem with weewx SQL database

In /usr/share/weewx/weewx/units.py the wetbulb temperature is defined as outWetbulb instead of wetbulbTemp. Remy LAVABRE schrieb am Sonntag, 17. September 2023 um 16:55:03 UTC+2: > Hello and thank you for your answer. > By adding the line weewx.units.obs_group_dict['wetbulbTemp'] = >

Re: [weewx-user] WeeWX in an RV?

You could set degree_compass = " °" in section "Labels" of section "Units" in lang/en.conf, skin.conf or weewx.conf Sheldon Herold schrieb am Donnerstag, 14. September 2023 um 12:20:55 UTC+2: > Bin bald zuhause. > -Von meinem Garmin-Gerät gesen > > Stefan Gliessmann schrieb am Do., 14. Sept.

[weewx-user] Diagrams of readings of the DWD weather stations

By now this applies to Germany only. So I describe it in german. Die WeeWX-Erweiterung weewx-DWD kann die Meßwerte der Stationen verschiedener staatlicher Wetterdienste abrufen. Bisher konnte man damit nur aktuelle Werte mittels $current als Zahlenwerte

[weewx-user] Re: Observation Types

I would suggest to look into obs_group_dict in /usr/share/weewx/weewx/units.py for a list of pre-defined observation types and their unit groups. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving

[weewx-user] Re: formatting issue in cheetah

Unfortunately the greek my character and the cubic symbol are not US-ASCII. So they have the 8th bit set. There are different methods to do that. The older one is ISO 8859, where one byte is always one character. The newer one is UTF-8 where one character can be 1, 2 or even more bytes. So if

Re: [weewx-user] Request - for python Requests module in v5 pip install

Most Linux distributions provide Python requests by means of their package management and update system. pip would mess up with this. Tom Keffer schrieb am Donnerstag, 24. August 2023 um 16:03:03 UTC+2: > Good reason to always run out of a virtual environment. > > On Thu, Aug 24, 2023 at 5:59 

  1   2   3   4   5   >