I managed to install Weewx on a Raspberry Pi 4 (1GB) with Raspbian Duster
and the installation went without any issue. The board temperature (with a
heat sink on the processor) is around 50 +/- 2C on continuous running of
weewx and broadcasting data to Wunderground. I don't get what you mean by
I managed to install Weewx on a Raspberry Pi 4 (1GB) with Raspbian Buster
and the installation went without any issue. The board temperature (with a
heat sink on the processor) is around 50 +/- 2C on continuous running of
weewx and broadcasting data to Wunderground. I don't get what you mean by
Hi All,
I recently installed Weewx 3.9.1 on Raspberry Pi 4 (running Raspbian
Buster), to connect my Acurite weather station (via the display console)
and upload data to weather underground. Installation was smooth and the
weather data gets uploaded to weather underground. I have enabled rapid
u are seeing.
>
> On Tuesday, 16 July 2019 14:05:49 UTC+3, kar ss wrote:
>>
>> Hi All,
>>
>> I recently installed Weewx 3.9.1 on Raspberry Pi 4 (running Raspbian
>> Buster), to connect my Acurite weather station (via the display console)
>> and upload da
Hi gjr80,
Thanks for the reply. I tried your suggestion, I stopped the weewx running
in deamon mode using the command: *sudo /etc/init.d/weewx stop*
and tried to run it directly as suggested by you using the command line: *sudo
weewxd weewx.conf,* but I am getting the following error message:
Hi Gary,
The modified command pointing to the weewx.conf file works, I could now see
information about the loop packets that is being received. The partial loop
packets send rain total every 36 seconds and rain rate every 18 seconds.
I will run this command for a while to see the actual update
Thanks Gary, I can check the rain data only during the next rain event. I
am attaching the syslog file as a text document. Hope this helps you get
some additional insight into the issue.
SS
On Thursday, 18 July 2019 15:22:42 UTC+5:30, gjr80 wrote:
>
> Ok, so you should be seeing rain info poste
. Not
sure whether there is any link to this. May be someone can throw some light.
Thanks
SS
On Thursday, 18 July 2019 16:39:40 UTC+5:30, kar ss wrote:
>
> Thanks Gary, I can check the rain data only during the next rain event. I
> am attaching the syslog file as a text document. Hope t
Gary, thanks for your reply. I am attaching the syslog file an
On Thursday, 15 August 2019 17:59:39 UTC+5:30, gjr80 wrote:
>
> The point of running Weewx directly was to see the loop and archive data
> that Weewx is processing and you can then reconcile this against what is
> appearing on WU. I
Hi Gary, you are right, there was no rain event during the log period
(reason for zero rain values), I did check the log during an earlier rain
event and indeed weewx was able to log the rain event as well as the rain
rate. With respect to the data being sent by weewx to WU, I don't see any
dis
ed and winddirection do
> not really change that quickly.
>
>
>
> On Saturday, 17 August 2019 10:44:02 UTC+3, kar ss wrote:
>>
>> Hi Gary, you are right, there was no rain event during the log period
>> (reason for zero rain values), I did check the log during an ear
11 matches
Mail list logo