I have a tower with all Tranzeo equipment.
Backhaul to tower is TR-5plus 5.8
The AP is TR-902 NF with a 180 degree antenna.
50 TR-902-11 as clients
All was working well until about 10 days ago when we noticed the speeds were
starting to decline.
Since then it is a nightmare speeds are usually
Changed frequencies?
Are all customers having problems or just several? many?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Aug 18, 2010 at 11:05 AM, ~NGL~ n...@ngl.net wrote:
I have a tower with all Tranzeo equipment.
Backhaul to
or caused by the frequency that you are using or is caused by a
hardware problem.
- Larry Yunker
_
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of ~NGL~
Sent: Wednesday, August 18, 2010 11:05 AM
To: WISPA General List
Subject: [WISPA] Major Disaster
Do you have public IPs on this tower, can one of us log in and look?
Are you keeping cacti or MRTG graphs of your signal strength etc?
If I still lived in Boonville I would be over in a heart-beat!
ryan
On Wed, Aug 18, 2010 at 8:05 AM, ~NGL~ n...@ngl.net wrote:
I have a tower with all
900MHz is scary to work with...we've seen problems in the past from
someone just getting a wireless 900MHz baby monitor that would affect
others in the general area of the home.
It could also be that someone is hogging or trashing your bandwidth too.
Do you implement any type of QoS?
On
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of ~NGL~
Sent: Wednesday, August 18, 2010 8:05 AM
To: WISPA General List
Subject: [WISPA] Major Disaster
I have a tower with all Tranzeo equipment.
Backhaul to tower is TR-5plus 5.8
The AP is TR-902 NF with a 180 degree antenna
AM
Subject: Re: [WISPA] Major Disaster
Do you have public IPs on this tower, can one of us log in and look?
Are you keeping cacti or MRTG graphs of your signal strength etc?
If I still lived in Boonville I would be over in a heart-beat!
ryan
On Wed, Aug 18, 2010 at 8:05 AM
All clients
Changed channels several times
NGL
--
From: Josh Luthman j...@imaginenetworksllc.com
Sent: Wednesday, August 18, 2010 8:11 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
Changed frequencies?
Are all
...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of ~NGL~
Sent: Wednesday, August 18, 2010 8:05 AM
To: WISPA General List
Subject: [WISPA] Major Disaster
I have a tower with all Tranzeo equipment.
Backhaul to tower is TR-5plus 5.8
The AP is TR-902 NF with a 180 degree antenna.
50 TR-902-11
On 8/18/2010 11:31 AM, ~NGL~ wrote:
All clients
Changed channels several times
NGL
what channel sizes? What freqs are you on for CPE and AP?
Leon
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 9.0.851 / Virus Database: 271.1.1/3066 - Release Date: 08/12/10
Subject: [WISPA] Major Disaster
I have a tower with all Tranzeo equipment.
Backhaul to tower is TR-5plus 5.8
The AP is TR-902 NF with a 180 degree antenna.
50 TR-902-11 as clients
All was working well until about 10 days ago when we noticed the speeds were
starting to decline.
Since
10:31 AM
To: WISPA General List
Subject: Re: [WISPA] Major Disaster
All clients
Changed channels several times
NGL
--
From: Josh Luthman j...@imaginenetworksllc.com
Sent: Wednesday, August 18, 2010 8:11 AM
To: WISPA General List wireless@wispa.org
Quarter 5 MHZ
908/5 MHZ
--
From: Leon D. Zetekoff wa4...@arrl.net
Sent: Wednesday, August 18, 2010 8:39 AM
To: wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
On 8/18/2010 11:31 AM, ~NGL~ wrote:
All clients
Changed channels several times
Re: [WISPA] Major DisasterWe have changed all wiring on the tower.
Floor Noise is the same 90-dbm
We have changed channels several times
From: Justin Wilson
Sent: Wednesday, August 18, 2010 8:41 AM
To: WISPA General List
Subject: Re: [WISPA] Major Disaster
Things I would check
*Subject:* [WISPA] Major Disaster
I have a tower with all Tranzeo equipment.
Backhaul to tower is TR-5plus 5.8
The AP is TR-902 NF with a 180 degree antenna.
50 TR-902-11 as clients
All was working well until about 10 days ago when we noticed the speeds
were starting to decline.
Since
On 8/18/2010 11:48 AM, ~NGL~ wrote:
Quarter 5 MHZ
908/5 MHZ
backhaul is on 900 too?
--
From: Leon D. Zetekoffwa4...@arrl.net
Sent: Wednesday, August 18, 2010 8:39 AM
To:wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
On 8/18/2010 11
*To:* WISPA General List mailto:wireless@wispa.org
*Subject:* Re: [WISPA] Major Disaster
Things I would check:
1.Do you have a customer(s) not at the best modulation rate?
One customer could be bringing the whole AP to a crawl, especially
when they start pulling
: Wed, 18 Aug 2010 08:56:12 -0700
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
We have changed all wiring on the tower.
Floor Noise is the same 90-dbm
We have changed channels several times
From: Justin Wilson mailto:li...@mtin.net
Sent: Wednesday, August
On 8/18/2010 12:00 PM, Leon D. Zetekoff wrote:
On 8/18/2010 11:56 AM, ~NGL~ wrote:
We have changed all wiring on the tower.
Floor Noise is the same 90-dbm
We have changed channels several times
whats the data rates on the backhaul and the CPEs?
also what are signal levels from CPEs and
If you have 50 clients on 5MHz you need to change IMO.
- Original Message -
From: ~NGL~ n...@ngl.net
To: WISPA General List wireless@wispa.org
Sent: Wednesday, August 18, 2010 8:48 AM
Subject: Re: [WISPA] Major Disaster
Quarter 5 MHZ
908/5 MHZ
Log into 5 customer radios.
Change secondary SSID on the CPE to something different from your APs SSID.
Change your AP SSID to match this new one.
Do this a few times until you find the problem client(s).
50 clients is A LOT for a TR902F.
ryan
On Wed, Aug 18, 2010 at 8:05 AM, ~NGL~
Re: [WISPA] Major DisasterThat is our next step, to remove all clients except 2
from the Mac list in the AP Access Control List
From: Justin Wilson
Sent: Wednesday, August 18, 2010 9:01 AM
To: WISPA General List
Subject: Re: [WISPA] Major Disaster
If it were me, and the problem
...@irongoat.net
Reply-To: WISPA General List wireless@wispa.org
Date: Wed, 18 Aug 2010 09:12:03 -0700
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
Log into 5 customer radios.
Change secondary SSID on the CPE to something different from your APs SSID.
Change your AP SSID
*Subject:* Re: [WISPA] Major Disaster
If it were me, and the problem happens anytime of the day I
would disassociate all the customers in the middle of the night
(providing you see the problem then too) and turn them on a few at
a time until the problem re-appears. If having a just
you are at the tower site.
509.988.0260
laters,
marlon
- Original Message -
From: ~NGL~
To: WISPA General List
Sent: Wednesday, August 18, 2010 9:18 AM
Subject: Re: [WISPA] Major Disaster
That is our next step, to remove all clients except 2 from the Mac list in
the AP
We run the Tranzeo 902nf radios as APs and the most we can get on them
is about 10-15 clients. After that performance declines rapidly. How
you ever got 50 on there is amazing. We have since moved to a MT AP
using a zcom gz901 card, and the performance has been much better.
Tranzeo radios just
Subject: Re: [WISPA] Major Disaster
We run the Tranzeo 902nf radios as APs and the most we can get on them
is about 10-15 clients. After that performance declines rapidly. How
you ever got 50 on there is amazing. We have since moved to a MT AP
using a zcom gz901 card, and the performance has
--
From: Chris Gotstein ch...@uplogon.com
Sent: Wednesday, August 18, 2010 11:49 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
We run the Tranzeo 902nf radios as APs and the most we can get on them
is about 10-15 clients. After
and can
quite literally overwhelm the processor on many access points.
- Larry Yunker
_
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of ~NGL~
Sent: Wednesday, August 18, 2010 11:56 AM
To: WISPA General List
Subject: Re: [WISPA] Major Disaster
We have
wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
We run the Tranzeo 902nf radios as APs and the most we can get on them
is about 10-15 clients. After that performance declines rapidly. How
you ever got 50 on there is amazing. We have since moved to a MT AP
using a zcom gz901 card
around 5.5% now running slow about 18%
At time getting to AP is ify
Firmware is 5.0.5
--
From: Chris Gotstein ch...@uplogon.com
Sent: Wednesday, August 18, 2010 11:49 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Major
Whoops, sorry. My last reply suggested adding an AP w/different polarity. That
would require going to 1/2 the clients and rotating their antenna. (was
thinking of Trango's automatic polarity switching)
On Aug 18, 2010, at 3:02 PM, ~NGL~ wrote:
Umac when running good this morning around 5.5%
@wispa.org
Subject: Re: [WISPA] Major Disaster
Umac when running good this morning around 5.5% now running slow about
18%
At time getting to AP is ify
Firmware is 5.0.5
--
From: Chris Gotstein ch...@uplogon.com
Sent: Wednesday
33 matches
Mail list logo
