@wispa.org
Sent: Tuesday, November 08, 2005 8:24 AM
Subject: Re: [WISPA] IP based Remote Reboot
These are great units, its what we use also at our cell sites. You can get
them for $250 for 8 port, in qty 5.
These are well worth it for cell sites.
What I'd like to see though is a sub-$100 unit
PROTECTED]
To: [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org
Sent: Wednesday, November 09, 2005 8:06 PM
Subject: RE: [WISPA] IP based Remote Reboot
Blair
I think this will do what you need tell them Tony front Demarc sent you:
http://www.remotedatacom.com/pages/KABU.html
Sincerely, Tony
.
Best regards,
Jeff Bell
Vice President
Nighthawk Systems, Inc.
8200 East Pacific Place
Ste 204
Denver, CO 80231
720-470-4090
Message: 1
Date: Thu, 10 Nov 2005 09:36:45 -0800
From: Marlon K. Schafer (509) 982-2181 [EMAIL PROTECTED]
Subject: Re: [WISPA] IP based Remote Reboot
To: WISPA
Blair, it might be a good idea to allow for 48 v powering, since that is
802.3af POE standard. This way your device could be mounted away from
the Radio if one so chose to.
John
Blair Davis wrote:
Well, I guess there is no reasonably priced unit out there that will
do what I need and fit in
General List wireless@wispa.org
Sent: Wednesday, November 09, 2005 11:14 AM
Subject: Re: [WISPA] IP based Remote Reboot
Blair, it might be a good idea to allow for 48 v powering, since that is
802.3af POE standard. This way your device could be mounted away from
the Radio if one so chose to.
John
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blair Davis
Sent: Tuesday, November 08, 2005 11:22 PM
To: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
Well, I guess there is no reasonably priced unit out there that will do what
I need and fit in the space allowed
Yes, Blair
That does sound good, let us all know. I second the vote for DC reboot
devices.
Original message
Date: Wed, 9 Nov 2005 14:49:43 -0500
From: Tom DeReggi [EMAIL PROTECTED]
Subject: Re: [WISPA] IP based Remote Reboot
To: WISPA General List wireless@wispa.org
Sounds good
DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop
it back down to 5 volts at the other end. They list for about $25, so I
wouldn't think it should cost you too much to do.
John
Blair Davis wrote:
John, I have considered it. My only concern was that it might
increase
let me know where you get them for $25
John Thomas wrote:
DLinks POE kits take 5 volts, bump it up to 48 across the wire and
drop it back down to 5 volts at the other end. They list for about
$25, so I wouldn't think it should cost you too much to do.
John
Blair Davis wrote:
John, I have
OK, I exaggerated, compuplus has them for $36 each. My point was that he
only needs half the circuit. Now that I think of it, I guess that as
long as his device takes 5-12 volts in, you would only need a power
reducer to use 48 volts up. It's a lot easir to get 48 volts to go 300
feet than it
That's a good price. I paid nearly $50 each.
John Thomas wrote:
Actually, Online Micro has the DWL-P200 for $30 and it can do 5 or 12
volts out the back.
John
A. Huppenthal wrote:
let me know where you get them for $25
John Thomas wrote:
DLinks POE kits take 5 volts, bump it up to 48
Not quite. The D-Link POE kit has a 48VDC power block with a DC-DC step
down unit at the other end.
$25 doesn't sound too bad until you see the current hardware budget. :(
--
John Thomas wrote:
DLinks POE kits take 5 volts, bump it up to 48 across the wire and
drop it back down to 5 volts
We get them from DH for less than $30 but I don't remember the exact
price off hand.
--
A. Huppenthal wrote:
That's a good price. I paid nearly $50 each.
John Thomas wrote:
Actually, Online Micro has the DWL-P200 for $30 and it can do 5 or 12
volts out the back.
John
A. Huppenthal
Right, my point here is that you don't need to do anything to make your
system work with 48 volts. We just need to acquire a 48-12 volt convertor.
John
Blair Davis wrote:
Not quite. The D-Link POE kit has a 48VDC power block with a DC-DC
step down unit at the other end.
$25 doesn't sound
Well, I guess there is no reasonably priced unit out there that will do
what I need and fit in the space allowed.
The comments on the list have shown me that there may be a demand for a
unit like this. I have decided to build my own. I have also decided to
make it available to others who
:22 AM
To: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
Well, I guess there is no reasonably priced unit out there that will do
what I need and fit in the space allowed.
The comments on the list have shown me that there may be a demand for a
unit like this. I have decided
Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port
for remote reboot ... $80
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
787.767.7466
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of
Not the cheapest, but they're really nice:
http://www.wti.com
I've used and installed them for many years.
Thank you
Frank Keeney
Pasadena Networks, LLC
Antennas, Cables and Equipment:
http://www.wlanparts.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Of G.Villarini
Sent: Monday, November 07, 2005 4:04 PM
To: 'WISPA General List'
Subject: RE: [WISPA] IP based Remote Reboot
http://www.apcc.com/products/family/index.cfm?id=3
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
787.767.7466
-Original
]
To: 'WISPA General List' wireless@wispa.org
Sent: Monday, November 07, 2005 7:59 PM
Subject: RE: [WISPA] IP based Remote Reboot
We have a couple of them in our office waiting to be deployed at tower
sites. The web interface is crap, it won't allow you to put in a subnet
and
default gateway. You
General List'
Subject: RE: [WISPA] IP based Remote Reboot
http://www.apcc.com/products/family/index.cfm?id=3
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
787.767.7466
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
, 2005 4:04 PM
To: 'WISPA General List'
Subject: RE: [WISPA] IP based Remote Reboot
http://www.apcc.com/products/family/index.cfm?id=3
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
787.767.7466
-Original Message-
From: [EMAIL PROTECTED
Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of G.Villarini
Sent: Monday, November 07, 2005 4:04 PM
To: 'WISPA General List'
Subject: RE: [WISPA] IP based Remote Reboot
http://www.apcc.com/products/family/index.cfm?id=3
Gino A. Villarini,
Aeronet Wireless Broadband Corp
wireless@wispa.org
Sent: Monday, November 07, 2005 7:24 PM
Subject: Re: [WISPA] IP based Remote Reboot
Thanks thats good to know. Since we don't run DHCP anywhere.
Based on that, probably only good as a home unit, thats behind a home
gateway w/ DHCP.
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet
Ah got it. Ok that's stupid, lol.
John Buwa
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blair Davis
Sent: Monday, November 07, 2005 11:00 PM
To: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
It will let you set an IP
25 matches
Mail list logo