Hang. It should actually cost less than $10k, but $10k is a safe bet. I
figured it'd cost me $7k to do it myself. I forget where I saw $10k. I'm
budgeting $20k for my BTOP project to cover instances where you may have to
bore at up to $200k/mile.
-
Mike Hammett
Intelligent Computing So
Mike,
Who are you working with for the build out quotes? We got quotes around 13,000
per mile. Was this the hang it or bury it?
John Buwa
Michiana Wireless
- Original Message -
From: "Mike Hammett"
To: sarn...@info-ed.com, "WISPA General List"
Sent: Tuesday, June 16, 2009 10:08:43 AM
http://tyconpower.com/products/systems.htm - Might be what you are looking
for.
Scott
e-zy.net
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Tuesday, June 16, 2009 3:02 PM
To: WISPA General List
Subject: [WISPA] UP
The WISPA Board of Directors has decided to start a member's only listserv
called fi...@wispa.org. If you are a current member of WISPA, you can
subscribe to this listserv at http://lists.wispa.org/mailman/listinfo/fiber.
Our hope is to further educate ourselves through the contribuition of trials
http://packetflux.com/ I don't think he has a lot of info about the
PoE units on the website, they're fairly new.
-Kevin
On Tue, Jun 16, 2009 at 3:34 PM, NGL wrote:
> Where can I get information on the Forrests SiteMonitors or similar
> products?
> Thanx
> NGL
>
> ---
Where can I get information on the Forrests SiteMonitors or similar
products?
Thanx
NGL
--
From: "Kevin Neal"
Sent: Tuesday, June 16, 2009 2:16 PM
To: "WISPA General List"
Subject: Re: [WISPA] UPS RFP
> Have the charging unit connected to deep cy
Have the charging unit connected to deep cycle batteries, install one
of Forrests SiteMonitors, or a Mikrotik that can sense input voltage,
then monitor that via SNMP. You can get the PoE injectors and control
them with the SiteMonitor as well. I'm just writing a web interface
to talk SNMP to For
Need Advise Where to find:
12V output 120V input
IP/SNMP control
Outdoor Style (NEMA)
Anyone make such a beast. I hate the idea of having to use a AC UPS to convert
its battery back to AC just to switch it back to DC at the POE. What a waste of
electricity and it lowers Tower uptime in a power
It's about $10k/mile to build aerial 60 - 96 strand aerial cable.
It's about $1600/home to do a 400 or so home FTTx deployment.
Singlemode is what you'll want to use.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--
F
What kind of cost are we looking at to get into fiber? What is the cost of
fiber now by the foot...I know this will vary by type and strands...so say
multimode, around 100 strands. I do not know much about fiber, so sorry if
these are stupid questions.
Scottie
-- Original Message -
It sure seems like interference since it's on all three APs, even when
you turn off the other two. One bad radio is possible but not three.
Could there be some others source of interference near but not on the
tower?
Greg
On Jun 16, 2009, at 10:13 AM, Michael Baird wrote:
> The only other th
The only other things on the tower according to the owner, is at 150mhz
and 450 mhz.
Regards
Michael Baird
> Could there be any other source of interference? What else is on the
> tower?
>
> Greg
>
> On Jun 16, 2009, at 8:37 AM, Michael Baird wrote:
>
>
>> I actually shut the radio's off on
Could there be any other source of interference? What else is on the
tower?
Greg
On Jun 16, 2009, at 8:37 AM, Michael Baird wrote:
> I actually shut the radio's off on the two opposite sectors and didn't
> see improvement, tried that with all three sectors, they all read
> about
> the same.
The advice I have generally received is to use OSPF only for distributing
infrastructure routes within one's network, and iBGP for all production
routes (i.e. netblocks associated with customers and services).
Thanks,
Adam
Webjogger Internet Services
ASN 20208
- Original Message -
Fro
Hey Butch,
Just got back to review this list ... thanks for the very useful post about
letting the Mikrotiks participate in the trunking. Much appreciated!
Adam
- Original Message -
From: "Butch Evans"
To: "WISPA General List"
Sent: Saturday, June 13, 2009 2:14 PM
Subject: Re: [WISPA
There's enough extra fiber that tranceiver based deployment could be
done on a small scale along side it.
I've run the fiber and I'm waiting for a GEPON 1gbps system to arrive
any day from Versatek http://www.versatek.com/products/gepon.htm
1gbps for 32 users, or less if you want.
I found this
I actually shut the radio's off on the two opposite sectors and didn't
see improvement, tried that with all three sectors, they all read about
the same.
From the suggestions here and elsewhere, I'm going to do the following
one at a time.
1). Spectrum analyze with all the radios off.
2). Adj
Michael
If you can reduce the TX power on 2 of the sectors and see if the third has RSL
improvement
Bob
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Blair Davis
Date: Mon, 15 Jun 2009 22:44:52
To: WISPA General List
Subject: Re: [WISPA] Radio Seperation
-
18 matches
Mail list logo
