RE: [WISPA] VPN and router choices
I have had good luck with Netgear FVS 318. they can establish up to 8 ipsec vpn tunnels. About $99 street... Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.273.4143 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Whigham Sent: Thursday, March 16, 2006 9:18 AM To: WISPA General List Subject: Re: [WISPA] VPN and router choices Bo, make sure that you're that you're not mis-interpreting VPN support with VPN services. Most of the $20-$100 routers will allow IPSEC (the good stuff) and PPTP to pass through the device. But, the only way I know of to get any of these to act as a VPN client or server is to upgrade to opensource firmware. For example, the WRT54GL will act as PPTP client or server and can act as an openvpn client when you use DD-WRT. See wrt54g.net for info on how to do this. But, keep in mind that this configuration voids the warranty and any support. Also, the device has 200mhz processor with 8MB RAM and 4MB flash. So, it's no powerhouse. You might look into linux boxes (to do an SSH VPN, IPSEC with FreeSwan, or OpenVPN for an SSL-based VPN), a Cisco PIX, or a SonicWall. I warn you that VPN is not an easy thing. PPTP is fairly simple (and it works with win98 clients with no 3rd party software). But, it's also proven to be insecure. VPN appliances are not cheap (probably >$500-$1000 for one that can handle any sort of load). But, you might be able to use a soekris board with a linux firmware that supports some VPN technology. Those are still cute and tiny (with plenty of horsepower), but cheaper. Luck to ya, Brian Whigham Yonder Networks Bo Hamilton wrote: > Hello list, > Im looking at setting up some VPN's and I have looked at many routers > that claim ease of use. Linksys, NetGear, D-Link and so on. I was > wondering if someone could tell me what is the easiest router for setup. > > Also, does one have to have a VPN server( i.e Windows or Linux) or > does the router take place of this for remote connections. > > The senario I have is one central office with 2 satalite offices that > connect to central. The central office having the main VPN router. I > want to have the two seperate locations seen in the network > neighborhood. > > Would this be a router to router VPN? If so what are the easiest > one's to configure. > > Im new to the VPN world so go easy on me. :) > > Thanks in advance, > > Bo Hamilton > NCOWireless.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] VPN and router choices
Netopia at each location. IPSEC or PPTP both server and client. Have over half a dozen installs using both DSL and Wireless mixed. Models to look at are R910 and 3300 series. Im looking at setting up some VPN's and I have looked at many routers that claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if someone could tell me what is the easiest router for setup. Also, does one have to have a VPN server( i.e Windows or Linux) or does the router take place of this for remote connections. The senario I have is one central office with 2 satalite offices that connect to central. The central office having the main VPN router. I want to have the two seperate locations seen in the network neighborhood. Would this be a router to router VPN? If so what are the easiest one's to configure. Im new to the VPN world so go easy on me. :) Thanks in advance, Bo Hamilton NCOWireless.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] VPN and router choices
Bo, make sure that you're that you're not mis-interpreting VPN support with VPN services. Most of the $20-$100 routers will allow IPSEC (the good stuff) and PPTP to pass through the device. But, the only way I know of to get any of these to act as a VPN client or server is to upgrade to opensource firmware. For example, the WRT54GL will act as PPTP client or server and can act as an openvpn client when you use DD-WRT. See wrt54g.net for info on how to do this. But, keep in mind that this configuration voids the warranty and any support. Also, the device has 200mhz processor with 8MB RAM and 4MB flash. So, it's no powerhouse. You might look into linux boxes (to do an SSH VPN, IPSEC with FreeSwan, or OpenVPN for an SSL-based VPN), a Cisco PIX, or a SonicWall. I warn you that VPN is not an easy thing. PPTP is fairly simple (and it works with win98 clients with no 3rd party software). But, it's also proven to be insecure. VPN appliances are not cheap (probably >$500-$1000 for one that can handle any sort of load). But, you might be able to use a soekris board with a linux firmware that supports some VPN technology. Those are still cute and tiny (with plenty of horsepower), but cheaper. Luck to ya, Brian Whigham Yonder Networks Bo Hamilton wrote: Hello list, Im looking at setting up some VPN's and I have looked at many routers that claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if someone could tell me what is the easiest router for setup. Also, does one have to have a VPN server( i.e Windows or Linux) or does the router take place of this for remote connections. The senario I have is one central office with 2 satalite offices that connect to central. The central office having the main VPN router. I want to have the two seperate locations seen in the network neighborhood. Would this be a router to router VPN? If so what are the easiest one's to configure. Im new to the VPN world so go easy on me. :) Thanks in advance, Bo Hamilton NCOWireless.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] VPN and router choices
Mikrotik will do at least some of what you are looking for. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: "Bo Hamilton" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Thu, 16 Mar 2006 01:41:37 -0500 Subject: [WISPA] VPN and router choices > Hello list, > Im looking at setting up some VPN's and I have looked at many routers that claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if someone could tell me what is the easiest router for setup. > > Also, does one have to have a VPN server( i.e Windows or Linux) or does the router take place of this for remote connections. > > The senario I have is one central office with 2 satalite offices that connect to central. The central office having the main VPN router. I want to have the two seperate locations seen in the network neighborhood. > > Would this be a router to router VPN? If so what are the easiest one's to configure. > > Im new to the VPN world so go easy on me. :) > > Thanks in advance, > > > Bo Hamilton > NCOWireless.com --- End of Original Message --- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] VPN and Router Choices?
There are a couple of ways to do this. 1. You can use hardware firewalls for site-to-site VPN. 2. You can use hardware firewalls and terminate them to a Windows or Linux server for a site-to-ste VPN. What performance level do you want? How secure does it need to be? How much bandwidth do they have? How much traffic do they want going through the tunnel? John >-Original Message- >From: Bo Hamilton [mailto:[EMAIL PROTECTED] >Sent: Wednesday, March 15, 2006 07:52 PM >To: 'WISPA General List' >Subject: [WISPA] VPN and Router Choices? > >Hello list, >Im looking at setting up some VPN's and I have looked at many routers that >claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if >someone could tell me what is the easiest router for setup. > >Also, does one have to have a VPN server( i.e Windows or Linux) or does the >router take place of this for remote connections. > >The senario I have is one central office with 2 satalite offices that >connect to central. The central office having the main VPN router. I want >to have the two seperate locations seen in the network neighborhood. > >Would this be a router to router VPN? If so what are the easiest one's to >configure. > >Im new to the VPN world so go easy on me. :) > >Thanks in advance, > >Bo Hamilton >NCOWireless.com > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] VPN and router choices
Hello list, Im looking at setting up some VPN's and I have looked at many routers that claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if someone could tell me what is the easiest router for setup. Also, does one have to have a VPN server( i.e Windows or Linux) or does the router take place of this for remote connections. The senario I have is one central office with 2 satalite offices that connect to central. The central office having the main VPN router. I want to have the two seperate locations seen in the network neighborhood. Would this be a router to router VPN? If so what are the easiest one's to configure. Im new to the VPN world so go easy on me. :) Thanks in advance, Bo Hamilton NCOWireless.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] VPN and router choices
Hello list, Im looking at setting up some VPN's and I have looked at many routers that claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if someone could tell me what is the easiest router for setup. Also, does one have to have a VPN server( i.e Windows or Linux) or does the router take place of this for remote connections. The senario I have is one central office with 2 satalite offices that connect to central. The central office having the main VPN router. I want to have the two seperate locations seen in the network neighborhood. Would this be a router to router VPN? If so what are the easiest one's to configure. Im new to the VPN world so go easy on me. :) Thanks in advance, Bo Hamilton NCOWireless.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] VPN and Router Choices
Hello list, Im looking at setting up some VPN's and I have looked at many routers that claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if someone could tell me what is the easiest router for setup. Also, does one have to have a VPN server( i.e Windows or Linux) or does the router take place of this for remote connections. The senario I have is one central office with 2 satalite offices that connect to central. The central office having the main VPN router. I want to have the two seperate locations seen in the network neighborhood. Would this be a router to router VPN? If so what are the easiest one's to configure. Im new to the VPN world so go easy on me. :) Thanks in advance, Bo Hamilton NCOWireless.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] VPN and Router Choices?
Hello list, Im looking at setting up some VPN's and I have looked at many routers that claim ease of use. Linksys, NetGear, D-Link and so on. I was wondering if someone could tell me what is the easiest router for setup. Also, does one have to have a VPN server( i.e Windows or Linux) or does the router take place of this for remote connections. The senario I have is one central office with 2 satalite offices that connect to central. The central office having the main VPN router. I want to have the two seperate locations seen in the network neighborhood. Would this be a router to router VPN? If so what are the easiest one's to configure. Im new to the VPN world so go easy on me. :) Thanks in advance, Bo Hamilton NCOWireless.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/