Re: [WISPA] Any Status Updates?
John, The real issue is that Mikrotik is ignoring the problem. I have personally emailed John Tully @ MT four or five times with no response. I posted a message on their support forum back in July or August and it was deleted. One of my partners posted a message on their support forum (with a different username) and it was also deleted off the forum. :( There is obviously an issue as Mikrotik is trying to cover it up (hoping it will go away). Travis Microserv John Scrivner wrote: Just to be clear. When I stated that I had heard that the RB532 was causing some interference out of band I was not trying to discredit Mikrotik or their products. I had read the thread below earlier. That was what had led to my belief that this board was creating some out of band interference and had ongoing issues related to that. If anyone has more current information about validation of this problem or a remedy please feel free to share. Thanks, Scriv Original Message Subject: RE: [WISPA] RouterBoard 532s Date: Thu, 10 Aug 2006 23:08:33 -0400 From: Eric Rogers [EMAIL PROTECTED] Reply-To: WISPA General List wireless@wispa.org To: WISPA General List wireless@wispa.org Does anyone know if there is a resolution on this issue? If you browse Mikrotik's site, the thread has been removed. Eric -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Thursday, July 13, 2006 6:18 PM To: WISPA General List Subject: Re: [WISPA] RouterBoard 532s Here is a thread from the MT forums on it. http://forum.mikrotik.com/viewtopic.php?t=9130 Sam Tetherow Sandhills Wireless Mac Dearman wrote: Where did you get that info from Travis? Links, source...etc? Mac Dearman *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Travis Johnson *Sent:* Thursday, July 13, 2006 3:58 PM *To:* WISPA General List *Subject:* Re: [WISPA] RouterBoard 532s Maybe they pulled them off production due to the NOISE they are blowing all over the 50-450Mhz spectrum. :( Travis Microserv Kelly Shaw wrote: Anyone know of a source with RouterBoard 532s in stock? I normally can get them from WispRouter but they won't respond to my phone calls about them... Kelly Shaw Pure Internet www.pure.net http://www.pure.net __ NOD32 1.1657 (20060713) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com !DSPAM:16,44b6c32336811364511223! -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Any Status Updates?
John, The last I heard, it was an issue caused by running the boards on 48 vDC. I don't think it is a problem if you are running them on lower voltages. I have a partner WISP that was causing some problems on a fire department frequency. It caused a clicking noise in their radio transmissions. Backing off the power alleviated this problem. Rick Harnish President Supernova Technologies, Inc. 260-827-2482 Founding Member of WISPA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Scrivner Sent: Saturday, December 02, 2006 12:49 PM To: wireless@wispa.org Subject: [WISPA] Any Status Updates? Just to be clear. When I stated that I had heard that the RB532 was causing some interference out of band I was not trying to discredit Mikrotik or their products. I had read the thread below earlier. That was what had led to my belief that this board was creating some out of band interference and had ongoing issues related to that. If anyone has more current information about validation of this problem or a remedy please feel free to share. Thanks, Scriv Original Message Subject:RE: [WISPA] RouterBoard 532s Date: Thu, 10 Aug 2006 23:08:33 -0400 From: Eric Rogers [EMAIL PROTECTED] Reply-To: WISPA General List wireless@wispa.org To: WISPA General List wireless@wispa.org Does anyone know if there is a resolution on this issue? If you browse Mikrotik's site, the thread has been removed. Eric -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Thursday, July 13, 2006 6:18 PM To: WISPA General List Subject: Re: [WISPA] RouterBoard 532s Here is a thread from the MT forums on it. http://forum.mikrotik.com/viewtopic.php?t=9130 Sam Tetherow Sandhills Wireless Mac Dearman wrote: Where did you get that info from Travis? Links, source...etc? Mac Dearman *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Travis Johnson *Sent:* Thursday, July 13, 2006 3:58 PM *To:* WISPA General List *Subject:* Re: [WISPA] RouterBoard 532s Maybe they pulled them off production due to the NOISE they are blowing all over the 50-450Mhz spectrum. :( Travis Microserv Kelly Shaw wrote: Anyone know of a source with RouterBoard 532s in stock? I normally can get them from WispRouter but they won't respond to my phone calls about them... Kelly Shaw Pure Internet www.pure.net http://www.pure.net __ NOD32 1.1657 (20060713) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com !DSPAM:16,44b6c32336811364511223! -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Any Status Updates?
John, we had an instance of the voltage regulator on the 532 causing interference in the public safety band (154 MHz). We were able to change it to 12V and the problem went away. 48V had a problem, and 12V fixed our problem. I have not heard anything official from MT on this issue. The State Police and the Ambulance were not happy campers when we found out what was happening. The hospital transmitted on their channel, and the transmission bled over to the State Police Channel. Once our MT was off no problem. Switch to 12V and still no problem. Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Scrivner Sent: Saturday, December 02, 2006 11:49 AM To: wireless@wispa.org Subject: [WISPA] Any Status Updates? Just to be clear. When I stated that I had heard that the RB532 was causing some interference out of band I was not trying to discredit Mikrotik or their products. I had read the thread below earlier. That was what had led to my belief that this board was creating some out of band interference and had ongoing issues related to that. If anyone has more current information about validation of this problem or a remedy please feel free to share. Thanks, Scriv Original Message Subject:RE: [WISPA] RouterBoard 532s Date: Thu, 10 Aug 2006 23:08:33 -0400 From: Eric Rogers [EMAIL PROTECTED] Reply-To: WISPA General List wireless@wispa.org To: WISPA General List wireless@wispa.org Does anyone know if there is a resolution on this issue? If you browse Mikrotik's site, the thread has been removed. Eric -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Thursday, July 13, 2006 6:18 PM To: WISPA General List Subject: Re: [WISPA] RouterBoard 532s Here is a thread from the MT forums on it. http://forum.mikrotik.com/viewtopic.php?t=9130 Sam Tetherow Sandhills Wireless Mac Dearman wrote: Where did you get that info from Travis? Links, source...etc? Mac Dearman *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Travis Johnson *Sent:* Thursday, July 13, 2006 3:58 PM *To:* WISPA General List *Subject:* Re: [WISPA] RouterBoard 532s Maybe they pulled them off production due to the NOISE they are blowing all over the 50-450Mhz spectrum. :( Travis Microserv Kelly Shaw wrote: Anyone know of a source with RouterBoard 532s in stock? I normally can get them from WispRouter but they won't respond to my phone calls about them... Kelly Shaw Pure Internet www.pure.net http://www.pure.net __ NOD32 1.1657 (20060713) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com !DSPAM:16,44b6c32336811364511223! -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.430 / Virus Database: 268.15.2/559 - Release Date: 11/30/2006 5:07 AM -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
