RE: [WISPA] Diagnosing interference
Hey Marlon, Here is my anritsu list. Love it, with all the upgrades I can't remember the cost but it was in the same ballpark. 1. 3.0-6 gig attachment is a little annoying because you have to take it on and off. 2. Battery life is Ok, like the care charger, Big brick to lug around on the AC cord. 3. Use in sunlight is great, Buttons work really well and placed in good position. Don't like the interface to label saved sweeps. Kind of like using your cell phone to txt someone. Big pain in the ass. 4. Resolution is really good 5. It's very flexible as far as software options. 6. support is very good. I had lots of questions when we got our first one. They answered them all and did some guiding over the phone. 7. Yearly recalibration is recommended. 8. Durable and light weight. Still need a backpact to carry all of your antenna's around. 9. I've seen better PC software on other units but it's not too bad. Some of the PC based stuff seems better for generic long term stuff but not high resolution scans. Dustin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer (509) 982-2181 Sent: Wednesday, October 04, 2006 9:40 AM To: WISPA General List Subject: Re: [WISPA] Diagnosing interference Hiya Dustin, I have an Advantest. 9k to 8g. Very nice. When I get another one I'm gonna look for a couple of things. I like the color lcd display, but it needs to be brighter for use in the sun. I'd get one that's got fewer buttons on it. I don't need to decode cell phone calls. Portable with battery backup would be cool. I LOVE the Anritsu units that EC carries. Too bad that the small ones need the frequency converters for our use. I also need to get some more of the super flexible 10' lmr 400 type cable. My last one didn't make it back from the rental Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Dustin Jurman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Tuesday, October 03, 2006 9:05 AM Subject: RE: [WISPA] Diagnosing interference > Hey Marlon, > > This may be a great opportunity for us to help some folks talk about > spectrum analyzers here. What are you using today? I'm using the anritsu > spectrum master. Expensive but I've been very happy with it. Maybe we > should get some bullet points together. > > Dustin > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Marlon K. Schafer (509) 982-2181 > Sent: Monday, October 02, 2006 12:29 PM > To: WISPA General List > Subject: Re: [WISPA] Diagnosing interference > > I use a spectrum analyzer. It's for rent too :-). > > EC also has a very nice portable unit (much easier to use) that's > available > for rent. Or they have them for sale if you're looking for something to > keep. > > I used to use some tools from teletronics but the new version isn't nearly > as good. If you just need something that'll give you a ballpark reading > they do work better than nothing. > > Marlon > (509) 982-2181 Equipment sales > (408) 907-6910 (Vonage)Consulting services > 42846865 (icq)And I run my own wisp! > 64.146.146.12 (net meeting) > www.odessaoffice.com/wireless > www.odessaoffice.com/marlon/cam > > > > - Original Message - > From: "Mike Ireton" <[EMAIL PROTECTED]> > To: > Sent: Sunday, October 01, 2006 11:33 AM > Subject: [WISPA] Diagnosing interference > > >> >> >> In our neck of the woods we have some areas where 802.11 systems simply >> do > >> not function, period (and this is across a range of frequency bands and >> equipment manufacturers). And sometimes, in some limited cases, we will >> have a sub who appears to be experiencing interference that is much >> louder > >> than our rssi at the sub (say they have a -63, but they still can't >> reliably hear the ap well enough for communication) and there's nothing >> really obvious in the area we can see. We know it's radio interference >> because we can play the channel flipping game, but we'd like to be better >> than that and actually diagnose the problem and identify the source and >> direction of the transmitter creating the problem, so that we can plan >> better and actually provide a resolution t
Re: [WISPA] Diagnosing interference
Hiya Dustin, I have an Advantest. 9k to 8g. Very nice. When I get another one I'm gonna look for a couple of things. I like the color lcd display, but it needs to be brighter for use in the sun. I'd get one that's got fewer buttons on it. I don't need to decode cell phone calls. Portable with battery backup would be cool. I LOVE the Anritsu units that EC carries. Too bad that the small ones need the frequency converters for our use. I also need to get some more of the super flexible 10' lmr 400 type cable. My last one didn't make it back from the rental Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Dustin Jurman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Tuesday, October 03, 2006 9:05 AM Subject: RE: [WISPA] Diagnosing interference Hey Marlon, This may be a great opportunity for us to help some folks talk about spectrum analyzers here. What are you using today? I'm using the anritsu spectrum master. Expensive but I've been very happy with it. Maybe we should get some bullet points together. Dustin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer (509) 982-2181 Sent: Monday, October 02, 2006 12:29 PM To: WISPA General List Subject: Re: [WISPA] Diagnosing interference I use a spectrum analyzer. It's for rent too :-). EC also has a very nice portable unit (much easier to use) that's available for rent. Or they have them for sale if you're looking for something to keep. I used to use some tools from teletronics but the new version isn't nearly as good. If you just need something that'll give you a ballpark reading they do work better than nothing. Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Mike Ireton" <[EMAIL PROTECTED]> To: Sent: Sunday, October 01, 2006 11:33 AM Subject: [WISPA] Diagnosing interference In our neck of the woods we have some areas where 802.11 systems simply do not function, period (and this is across a range of frequency bands and equipment manufacturers). And sometimes, in some limited cases, we will have a sub who appears to be experiencing interference that is much louder than our rssi at the sub (say they have a -63, but they still can't reliably hear the ap well enough for communication) and there's nothing really obvious in the area we can see. We know it's radio interference because we can play the channel flipping game, but we'd like to be better than that and actually diagnose the problem and identify the source and direction of the transmitter creating the problem, so that we can plan better and actually provide a resolution that will last for that sub. We know about spectrum analysis and such and actually own a handy unit (the Spectran) but it doesn't give real time data useful for direction finding. What are some of the other tools (hand held or truck mounted, not built-in firmware features) you folks use for this? If we had a tool that would just give us knowledge about the non-household applications present in these areas (where non-household is anything with a larger gain antenna and/or power output than a cordless phone or wireless access point), we could even go so far as to try and coordinate with those applications for the betterment of everyone. But just waking up one morning and learning a long time customer now has an Interference problem you have no way to resolve other than by terminating the business relationship, just really sucks ass in my opinion. And when you run out of tricks like new antennas, equipment, alignments and such, that's exactly what you're left with. Mike- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Diagnosing interference
Hey Marlon, This may be a great opportunity for us to help some folks talk about spectrum analyzers here. What are you using today? I'm using the anritsu spectrum master. Expensive but I've been very happy with it. Maybe we should get some bullet points together. Dustin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer (509) 982-2181 Sent: Monday, October 02, 2006 12:29 PM To: WISPA General List Subject: Re: [WISPA] Diagnosing interference I use a spectrum analyzer. It's for rent too :-). EC also has a very nice portable unit (much easier to use) that's available for rent. Or they have them for sale if you're looking for something to keep. I used to use some tools from teletronics but the new version isn't nearly as good. If you just need something that'll give you a ballpark reading they do work better than nothing. Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Mike Ireton" <[EMAIL PROTECTED]> To: Sent: Sunday, October 01, 2006 11:33 AM Subject: [WISPA] Diagnosing interference > > > In our neck of the woods we have some areas where 802.11 systems simply do > not function, period (and this is across a range of frequency bands and > equipment manufacturers). And sometimes, in some limited cases, we will > have a sub who appears to be experiencing interference that is much louder > than our rssi at the sub (say they have a -63, but they still can't > reliably hear the ap well enough for communication) and there's nothing > really obvious in the area we can see. We know it's radio interference > because we can play the channel flipping game, but we'd like to be better > than that and actually diagnose the problem and identify the source and > direction of the transmitter creating the problem, so that we can plan > better and actually provide a resolution that will last for that sub. > > We know about spectrum analysis and such and actually own a handy unit > (the Spectran) but it doesn't give real time data useful for direction > finding. What are some of the other tools (hand held or truck mounted, not > built-in firmware features) you folks use for this? If we had a tool that > would just give us knowledge about the non-household applications present > in these areas (where non-household is anything with a larger gain antenna > and/or power output than a cordless phone or wireless access point), we > could even go so far as to try and coordinate with those applications for > the betterment of everyone. But just waking up one morning and learning a > long time customer now has an Interference problem you have no way to > resolve other than by terminating the business relationship, just really > sucks ass in my opinion. And when you run out of tricks like new antennas, > equipment, alignments and such, that's exactly what you're left with. > > > > Mike- > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Diagnosing interference
Mike, I use a Motorola Canopy 2.4 SM to check for interference issues. It is a poor mans SA, but it does show you what you are looking for and it does it real time as well with a pretty nice interface. Mac -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Ireton Sent: Sunday, October 01, 2006 2:45 PM To: wireless@wispa.org Subject: Re: [WISPA] Diagnosing interference Ralph Fowler wrote: > Spectran? Are you talking about the software for a PC sound card? > That's not going to do what you want, for sure! > There really isn't a cheap solution. > > We have an expensive hand held unit, looks like an alien ray gun, that does a range of 0 - 6ghz with down to 1mhz resolution per step. The problems are not enough resolution (can't see any difference between -80dbm and -60dbm, or at least, not without a lot of time consuming tweeking and such), and no real-time sweeping capabillity, making a complete pass take too long for direction finding activities (or at least, for my reletive level of inexperience). What I'd want, I think, is a crt with the wavy lines updated in near real time, in a hand held unit I can take into the field and really see what and where things are. I don't care too much about formallities, I'd just like to see that, yes, there's a -37 between 2454 and 2459mhz and that's why this link isn't working. There were a few units from Berkeley Varitronics that we were considering at one point, but unfortunately we couldn't be permitted to receive a live demonstration and so that $4,000 sale had to be postponed indefinately because we don't buy expensive equipment we're not permitted to try out first. And that's too bad because they really do seem to have some quite useful field testing equipment more tuned and designed for wisp field use than the generic spectrum analysis tools previously mentioned. Mike- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.407 / Virus Database: 268.12.11/460 - Release Date: 10/1/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Diagnosing interference
I use a spectrum analyzer. It's for rent too :-). EC also has a very nice portable unit (much easier to use) that's available for rent. Or they have them for sale if you're looking for something to keep. I used to use some tools from teletronics but the new version isn't nearly as good. If you just need something that'll give you a ballpark reading they do work better than nothing. Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Mike Ireton" <[EMAIL PROTECTED]> To: Sent: Sunday, October 01, 2006 11:33 AM Subject: [WISPA] Diagnosing interference In our neck of the woods we have some areas where 802.11 systems simply do not function, period (and this is across a range of frequency bands and equipment manufacturers). And sometimes, in some limited cases, we will have a sub who appears to be experiencing interference that is much louder than our rssi at the sub (say they have a -63, but they still can't reliably hear the ap well enough for communication) and there's nothing really obvious in the area we can see. We know it's radio interference because we can play the channel flipping game, but we'd like to be better than that and actually diagnose the problem and identify the source and direction of the transmitter creating the problem, so that we can plan better and actually provide a resolution that will last for that sub. We know about spectrum analysis and such and actually own a handy unit (the Spectran) but it doesn't give real time data useful for direction finding. What are some of the other tools (hand held or truck mounted, not built-in firmware features) you folks use for this? If we had a tool that would just give us knowledge about the non-household applications present in these areas (where non-household is anything with a larger gain antenna and/or power output than a cordless phone or wireless access point), we could even go so far as to try and coordinate with those applications for the betterment of everyone. But just waking up one morning and learning a long time customer now has an Interference problem you have no way to resolve other than by terminating the business relationship, just really sucks ass in my opinion. And when you run out of tricks like new antennas, equipment, alignments and such, that's exactly what you're left with. Mike- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Diagnosing interference
Have you tried to use the HF-6060 you have with a USB cable connected to the Laptop and the Windows Software ? You will find the software to be more flexible and also will allow you to store the results. Faisal Imtiaz SnappyDSL.net -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Ireton Sent: Sunday, October 01, 2006 3:45 PM To: wireless@wispa.org Subject: Re: [WISPA] Diagnosing interference Ralph Fowler wrote: > Spectran? Are you talking about the software for a PC sound card? > That's not going to do what you want, for sure! > There really isn't a cheap solution. > > We have an expensive hand held unit, looks like an alien ray gun, that does a range of 0 - 6ghz with down to 1mhz resolution per step. The problems are not enough resolution (can't see any difference between -80dbm and -60dbm, or at least, not without a lot of time consuming tweeking and such), and no real-time sweeping capabillity, making a complete pass take too long for direction finding activities (or at least, for my reletive level of inexperience). What I'd want, I think, is a crt with the wavy lines updated in near real time, in a hand held unit I can take into the field and really see what and where things are. I don't care too much about formallities, I'd just like to see that, yes, there's a -37 between 2454 and 2459mhz and that's why this link isn't working. There were a few units from Berkeley Varitronics that we were considering at one point, but unfortunately we couldn't be permitted to receive a live demonstration and so that $4,000 sale had to be postponed indefinately because we don't buy expensive equipment we're not permitted to try out first. And that's too bad because they really do seem to have some quite useful field testing equipment more tuned and designed for wisp field use than the generic spectrum analysis tools previously mentioned. Mike- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Diagnosing interference
Ralph Fowler wrote: Spectran? Are you talking about the software for a PC sound card? That's not going to do what you want, for sure! There really isn't a cheap solution. We have an expensive hand held unit, looks like an alien ray gun, that does a range of 0 - 6ghz with down to 1mhz resolution per step. The problems are not enough resolution (can't see any difference between -80dbm and -60dbm, or at least, not without a lot of time consuming tweeking and such), and no real-time sweeping capabillity, making a complete pass take too long for direction finding activities (or at least, for my reletive level of inexperience). What I'd want, I think, is a crt with the wavy lines updated in near real time, in a hand held unit I can take into the field and really see what and where things are. I don't care too much about formallities, I'd just like to see that, yes, there's a -37 between 2454 and 2459mhz and that's why this link isn't working. There were a few units from Berkeley Varitronics that we were considering at one point, but unfortunately we couldn't be permitted to receive a live demonstration and so that $4,000 sale had to be postponed indefinately because we don't buy expensive equipment we're not permitted to try out first. And that's too bad because they really do seem to have some quite useful field testing equipment more tuned and designed for wisp field use than the generic spectrum analysis tools previously mentioned. Mike- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Diagnosing interference
Spectran? Are you talking about the software for a PC sound card? That's not going to do what you want, for sure! There really isn't a cheap solution. What wireless gear do you use? If it has an external antenna input you should be able to attach a very high gain antenna (and an attenuator) and go on a real live "fox hunt" You can rent a spectrum analyzer as well, but it is pricey! I'm using one from Rohde and Schwarz. A 0-3 GHz one goes for $450.00 - $640.00 per month -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Ireton Sent: Sunday, October 01, 2006 11:34 AM To: wireless@wispa.org Subject: [WISPA] Diagnosing interference In our neck of the woods we have some areas where 802.11 systems simply do not function, period (and this is across a range of frequency bands and equipment manufacturers). And sometimes, in some limited cases, we will have a sub who appears to be experiencing interference that is much louder than our rssi at the sub (say they have a -63, but they still can't reliably hear the ap well enough for communication) and there's nothing really obvious in the area we can see. We know it's radio interference because we can play the channel flipping game, but we'd like to be better than that and actually diagnose the problem and identify the source and direction of the transmitter creating the problem, so that we can plan better and actually provide a resolution that will last for that sub. We know about spectrum analysis and such and actually own a handy unit (the Spectran) but it doesn't give real time data useful for direction finding. What are some of the other tools (hand held or truck mounted, not built-in firmware features) you folks use for this? If we had a tool that would just give us knowledge about the non-household applications present in these areas (where non-household is anything with a larger gain antenna and/or power output than a cordless phone or wireless access point), we could even go so far as to try and coordinate with those applications for the betterment of everyone. But just waking up one morning and learning a long time customer now has an Interference problem you have no way to resolve other than by terminating the business relationship, just really sucks ass in my opinion. And when you run out of tricks like new antennas, equipment, alignments and such, that's exactly what you're left with. Mike- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/