PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of KyWiFi LLC
Sent: Tuesday, February 21, 2006 3:41 PM
To: WISPA General List
Subject: Re: [WISPA] Ethernet Opto Isolator
Beautiful enclosure Rick! How long before we see these
available at RadioShack? ;-)
x27;WISPA General List'"
Sent: Tuesday, February 21, 2006 11:03 AM
Subject: RE: [WISPA] Ethernet Opto Isolator
Nah, that one is a mess (hurried job), here is the way they should look.
Rick Harnish
President
OnlyInternet Broadband & Wireless, Inc.
260-827-2482 Office
260-307-400
half Of Tom DeReggi
Sent: Tuesday, February 21, 2006 1:07 PM
To: WISPA General List
Subject: Re: [WISPA] Ethernet Opto Isolator
What are you using to hold those radio circuit boards in place?
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message ---
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Tom DeReggi
Sent: Tuesday, February 21, 2006 10:04 AM
To: WISPA General List
Subject: Re: [WISPA] Ethernet Opto Isolator
Rick,
Sweet! You did a heck of a clean job on that cabnet.
Tom DeReggi
RapidD
sident
OnlyInternet Broadband & Wireless, Inc.
260-827-2482 Office
260-307-4000 Cell
260-918-4340 VoIP
www.oibw.net
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Tom DeReggi
Sent: Tuesday, February 21, 2006 1:56 AM
To: WISPA Ge
ry 20, 2006 12:42 PM
Subject: RE: [WISPA] Ethernet Opto Isolator
For this, I've normally used an Ethernet fiber converter. Cat5 -> Fiber on
the tower and Fiber -> Cat5 down below.
These are "standard" 10/100 megabit Ethernet converters readily available
from networking supply h
For this, I've normally used an Ethernet fiber converter. Cat5 -> Fiber on
the tower and Fiber -> Cat5 down below.
These are "standard" 10/100 megabit Ethernet converters readily available
from networking supply houses.
Frank Keeney
Pasadena Networks, LLC
Antennas, Cables and Equipment:
http://
