We have a tower site where we agreed to allow a friend of the tower owner
to install a 2-way radio repeater. I believe it is using a frequency around
450 mhz. We installed their omni antenna on a 3ft stand off close to a UBNT
Nanobridge M2 radio which is pointing directly away from the omni - omni
It might also be the Ethernet run causing interference.
On Thursday, October 31, 2013, Chris Fabien wrote:
We have a tower site where we agreed to allow a friend of the tower owner
to install a 2-way radio repeater. I believe it is using a frequency around
450 mhz. We installed their omni
I would try powering off the NBM2 and let them do a quick test. First
thought would be they have something wrong with their handheld, like bad
mic, poor reception with rubber duck, etc.
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Sean Heskett
Sent:
Make sure all cables going up the tower, including Cat5 and their feed line for
the 2-way radio, has the shield grounded properly at top, middle and bottom of
the tower. I agree with Matt Brendle, try powering down the NBM2 and do a quick
test to see if anything changes. Mobile radios usually
