Re: [WISPA] ot rj45 crimpers
That was pretty much my thought. I can do a good job on the crimps (as long as I don't have a broken crimper, sigh). The problem is doing the crimps when it's 10* with a 20mph breeze blowing. That's when it gets really hard to keep those wires in the right order while you try to push them into the crimp. laters, Marlon(509) 982-2181 Equipment sales(408) 907-6910 (Vonage) Consulting services42846865 (icq) And I run my own wisp!64.146.146.12 (net meeting)www.odessaoffice.com/wirelesswww.odessaoffice.com/marlon/cam - Original Message - From: JohnnyO To: WISPA General List Sent: Wednesday, February 22, 2006 2:25 PM Subject: Re: [WISPA] ot rj45 crimpers I'm the one who turned Rick and many others onto these Marlon - We've been using them for almost 3yrs. We have had 1 truck roll due to a bad crimp in this amount of time. Yes they are expensive if you look at it on a per crimp basis - but what is $1.10 per install worth to you in time / frustration / a professional crimp ?I buy these in bulk in lots of 10,000 at a time. If anyone wants to purchase some ends for these I can prob save you $15.00 per 300pack and $10.00 on the tool.JohnnyOOn Wed, 2006-02-22 at 12:22 -0500, Rick Smith wrote: they're EZ RJ45 crimpers / ends. and yeah, they're around 50 - 70 cents PER CONNECTOR. BUT I'll tell you whatsince I bought them, I've NEVER remade a cable, NOR have I had to use a cable tester... I won't go back now... actually feel helpless to borrow someone else's crimpers / ends Marlon K. Schafer (509) 982-2181 wrote: > That's it. Thanks! > > Do you really pay $.60 per connector??? Maybe it's not as nice of a > tool as I thought > > laters, > Marlon > (509) 982-2181 Equipment sales > (408) 907-6910 (Vonage)Consulting services > 42846865 (icq)And I run my own wisp! > 64.146.146.12 (net meeting) > www.odessaoffice.com/wireless > www.odessaoffice.com/marlon/cam > > > > - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> > To: "WISPA General List" <wireless@wispa.org> > Sent: Wednesday, February 22, 2006 9:14 AM > Subject: Re: [WISPA] ot rj45 crimpers > > >> http://www.happcontrols.com/electrical_supplies/92060900.htm >> >> --- >> Aubrey Wells >> One Ring Networks >> [EMAIL PROTECTED] >> o: (404) 601.1407 >> f: (404) 601.1408 >> c: (770) 356.9767 >> >> >> >> Marlon K. Schafer (509) 982-2181 wrote: >>> Hi All, >>> >>> I'm looking for a crimper I saw someone talk about. It uses special >>> rj45 connectors that allow the cable to go through the end. Then the >>> crimper crimps and cuts to length at the same time. >>> >>> Anyone know what it's called and where to get the connectors and the >>> crimper? >>> >>> thanks! >>> >>> Marlon >>> (509) 982-2181 Equipment sales >>> (408) 907-6910 (Vonage)Consulting services >>> 42846865 (icq)And I run my own wisp! >>> 64.146.146.12 (net meeting) >>> www.odessaoffice.com/wireless >>> www.odessaoffice.com/marlon/cam >>> >>> >>> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > -- WISPA Wireless List: wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
I agree, this is the set that I have been using for 8 years now. Has interchangable dies for rj-11 and rj-45. Probably made 1000+ ends with no bad crimps and still a nice working tool, no slop. Altho, they cost $125, I would use none other. http://www.tecratools.com/pages/datacom/graphics/39150l.gif Pete Davis wrote: Yeah. I bought a $45 pair of Ideal brand crimpers, and it was definitely money well spent. I am familiar with those ratcheting ones, too. They are nice. The $15 that come free with a box of cable sometimes are what we WERE using, but we were having to redo ends more often than not. It was rare to get a 2 crimp install done with just two ends with cheap crimpers. Pete Davis NoDial.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
Yeah. I bought a $45 pair of Ideal brand crimpers, and it was definitely money well spent. I am familiar with those ratcheting ones, too. They are nice. The $15 that come free with a box of cable sometimes are what we WERE using, but we were having to redo ends more often than not. It was rare to get a 2 crimp install done with just two ends with cheap crimpers. Pete Davis NoDial.net Mark Koskenmaki wrote: The "local" electronics store sold me a pair of crimpers that listed for $55, but since the package was trashed, he gave me $10 off. Boy, I have never regretted it. No more of those cheap ones. Not a single bad crimp since I changed crimpers and yes, we use the "cheap" standard ends. We had issues with the "regular" ones, even though we had tried 3 different pairs of crimpers. We never left a customer with a bad cable, but there was a couple times the c able didn't work, and visually inspecting the crimp showed a deficiency. These things are NOT very convenient to use, but they have this ratcheting mechanism that won't let you let loose of the connector until you squeeze all the way.The plug is tight in the crimper, and they are very heavy. Not a single bad crimp since then. North East Oregon Fastnet, LLC 509-593-4061 personal correspondence to: mark at neofast dot net sales inquiries to: purchasing at neofast dot net Fast Internet, NO WIRES! - - Original Message - From: "Pete Davis" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 11:57 AM Subject: Re: [WISPA] ot rj45 crimpers I have bought those before. They are kind of a cool novelty, but they don't add THAT much reliability/speed/ease of use/etc IMO. pd Marlon K. Schafer (509) 982-2181 wrote: That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] ot rj45 crimpers. Please take this offlist.
Whaa wha wha wha wh! Guys, your making me sick. Please stop - Pleaseeaasee. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of George Sent: Wednesday, February 22, 2006 3:37 PM To: [EMAIL PROTECTED]; WISPA General List Subject: Re: [WISPA] ot rj45 crimpers. Please take this offlist. JohnnyO wrote: > Kurt is slowly proving himself as an idiot on this list. Kurt - GROW UP > - You don't always have to be the person to "one up" everyone. > > JohnnyO > Maybe the best way to handle gripes is to take it off list and email him directly. The other day on the dslreports list that Mark or someone had posted a link to, one of the wisps complained about the back biting. Not good for wispa, not good for you or anyone else. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
The "local" electronics store sold me a pair of crimpers that listed for $55, but since the package was trashed, he gave me $10 off. Boy, I have never regretted it. No more of those cheap ones. Not a single bad crimp since I changed crimpers and yes, we use the "cheap" standard ends. We had issues with the "regular" ones, even though we had tried 3 different pairs of crimpers. We never left a customer with a bad cable, but there was a couple times the c able didn't work, and visually inspecting the crimp showed a deficiency. These things are NOT very convenient to use, but they have this ratcheting mechanism that won't let you let loose of the connector until you squeeze all the way.The plug is tight in the crimper, and they are very heavy. Not a single bad crimp since then. North East Oregon Fastnet, LLC 509-593-4061 personal correspondence to: mark at neofast dot net sales inquiries to: purchasing at neofast dot net Fast Internet, NO WIRES! - - Original Message - From: "Pete Davis" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 11:57 AM Subject: Re: [WISPA] ot rj45 crimpers > I have bought those before. They are kind of a cool novelty, but they > don't add THAT much reliability/speed/ease of use/etc IMO. > > pd > > Marlon K. Schafer (509) 982-2181 wrote: > > That's it. Thanks! > > > > Do you really pay $.60 per connector??? Maybe it's not as nice of a > > tool as I thought > > > > laters, > > Marlon > > (509) 982-2181 Equipment sales > > (408) 907-6910 (Vonage)Consulting services > > 42846865 (icq)And I run my own wisp! > > 64.146.146.12 (net meeting) > > www.odessaoffice.com/wireless > > www.odessaoffice.com/marlon/cam > > > > > > > > - Original Message - From: "Aubrey Wells" > > <[EMAIL PROTECTED]> > > To: "WISPA General List" > > Sent: Wednesday, February 22, 2006 9:14 AM > > Subject: Re: [WISPA] ot rj45 crimpers > > > > > >> http://www.happcontrols.com/electrical_supplies/92060900.htm > >> > >> --- > >> Aubrey Wells > >> One Ring Networks > >> [EMAIL PROTECTED] > >> o: (404) 601.1407 > >> f: (404) 601.1408 > >> c: (770) 356.9767 > >> > >> > >> > >> Marlon K. Schafer (509) 982-2181 wrote: > >>> Hi All, > >>> > >>> I'm looking for a crimper I saw someone talk about. It uses special > >>> rj45 connectors that allow the cable to go through the end. Then > >>> the crimper crimps and cuts to length at the same time. > >>> > >>> Anyone know what it's called and where to get the connectors and the > >>> crimper? > >>> > >>> thanks! > >>> > >>> Marlon > >>> (509) 982-2181 Equipment sales > >>> (408) 907-6910 (Vonage)Consulting services > >>> 42846865 (icq)And I run my own > >>> wisp! > >>> 64.146.146.12 (net meeting) > >>> www.odessaoffice.com/wireless > >>> www.odessaoffice.com/marlon/cam > >>> > >>> > >>> > >> -- > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers. Please take this offlist.
JohnnyO wrote: Kurt is slowly proving himself as an idiot on this list. Kurt - GROW UP - You don't always have to be the person to "one up" everyone. JohnnyO Maybe the best way to handle gripes is to take it off list and email him directly. The other day on the dslreports list that Mark or someone had posted a link to, one of the wisps complained about the back biting. Not good for wispa, not good for you or anyone else. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
Kurt is slowly proving himself as an idiot on this list. Kurt - GROW UP - You don't always have to be the person to "one up" everyone. JohnnyO On Wed, 2006-02-22 at 13:54 -0500, Brian Rohrbacher wrote: EZ is not for speed. It's for doing the job right. One service call because of your "fast" crimp and all the speed for years of "fast" crimping is lost. Kurt Fankhauser wrote: >I can crimp a regular rj45 connector faster than you can crimp your EZ >ones. If you know what you are doing you have no problem crimping one. > >Kurt Fankhauser >WAVELINC >114 S. Walnut St. >Bucyrus, OH 44820 >419-562-6405 >www.wavelinc.com > > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On >Behalf Of Matt Liotta >Sent: Wednesday, February 22, 2006 9:26 AM >To: WISPA General List >Subject: Re: [WISPA] ot rj45 crimpers > >What is your time worth? > >-Matt > >Marlon K. Schafer (509) 982-2181 wrote: > > > >>That's it. Thanks! >> >>Do you really pay $.60 per connector??? Maybe it's not as nice of a >>tool as I thought >> >>laters, >>Marlon >>(509) 982-2181 Equipment sales >>(408) 907-6910 (Vonage)Consulting services >>42846865 (icq)And I run my own >> >> >wisp! > > >>64.146.146.12 (net meeting) >>www.odessaoffice.com/wireless >>www.odessaoffice.com/marlon/cam >> >> >> >>- Original Message - From: "Aubrey Wells" >><[EMAIL PROTECTED]> >>To: "WISPA General List" <wireless@wispa.org> >>Sent: Wednesday, February 22, 2006 9:14 AM >>Subject: Re: [WISPA] ot rj45 crimpers >> >> >> >> >>>http://www.happcontrols.com/electrical_supplies/92060900.htm >>> >>>--- >>>Aubrey Wells >>>One Ring Networks >>>[EMAIL PROTECTED] >>>o: (404) 601.1407 >>>f: (404) 601.1408 >>>c: (770) 356.9767 >>> >>> >>> >>>Marlon K. Schafer (509) 982-2181 wrote: >>> >>> >>> >>>>Hi All, >>>> >>>>I'm looking for a crimper I saw someone talk about. It uses special >>>> >>>> > > > >>>>rj45 connectors that allow the cable to go through the end. Then >>>>the crimper crimps and cuts to length at the same time. >>>> >>>>Anyone know what it's called and where to get the connectors and the >>>> >>>> > > > >>>>crimper? >>>> >>>>thanks! >>>> >>>>Marlon >>>>(509) 982-2181 Equipment sales >>>>(408) 907-6910 (Vonage)Consulting services >>>>42846865 (icq)And I run my own >>>>wisp! >>>>64.146.146.12 (net meeting) >>>>www.odessaoffice.com/wireless >>>>www.odessaoffice.com/marlon/cam >>>> >>>> >>>> >>>> >>>> >>>-- >>>WISPA Wireless List: wireless@wispa.org >>> >>>Subscribe/Unsubscribe: >>>http://lists.wispa.org/mailman/listinfo/wireless >>> >>>Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> > > > -- Brian Rohrbacher Reliable Internet, LLC www.reliableinter.net Cell 269-838-8338 "Caught up in the Air" 1 Thess. 4:17 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
I'm the one who turned Rick and many others onto these Marlon - We've been using them for almost 3yrs. We have had 1 truck roll due to a bad crimp in this amount of time. Yes they are expensive if you look at it on a per crimp basis - but what is $1.10 per install worth to you in time / frustration / a professional crimp ? I buy these in bulk in lots of 10,000 at a time. If anyone wants to purchase some ends for these I can prob save you $15.00 per 300pack and $10.00 on the tool. JohnnyO On Wed, 2006-02-22 at 12:22 -0500, Rick Smith wrote: they're EZ RJ45 crimpers / ends. and yeah, they're around 50 - 70 cents PER CONNECTOR. BUT I'll tell you whatsince I bought them, I've NEVER remade a cable, NOR have I had to use a cable tester... I won't go back now... actually feel helpless to borrow someone else's crimpers / ends Marlon K. Schafer (509) 982-2181 wrote: > That's it. Thanks! > > Do you really pay $.60 per connector??? Maybe it's not as nice of a > tool as I thought > > laters, > Marlon > (509) 982-2181 Equipment sales > (408) 907-6910 (Vonage)Consulting services > 42846865 (icq)And I run my own wisp! > 64.146.146.12 (net meeting) > www.odessaoffice.com/wireless > www.odessaoffice.com/marlon/cam > > > > - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> > To: "WISPA General List" <wireless@wispa.org> > Sent: Wednesday, February 22, 2006 9:14 AM > Subject: Re: [WISPA] ot rj45 crimpers > > >> http://www.happcontrols.com/electrical_supplies/92060900.htm >> >> --- >> Aubrey Wells >> One Ring Networks >> [EMAIL PROTECTED] >> o: (404) 601.1407 >> f: (404) 601.1408 >> c: (770) 356.9767 >> >> >> >> Marlon K. Schafer (509) 982-2181 wrote: >>> Hi All, >>> >>> I'm looking for a crimper I saw someone talk about. It uses special >>> rj45 connectors that allow the cable to go through the end. Then the >>> crimper crimps and cuts to length at the same time. >>> >>> Anyone know what it's called and where to get the connectors and the >>> crimper? >>> >>> thanks! >>> >>> Marlon >>> (509) 982-2181 Equipment sales >>> (408) 907-6910 (Vonage)Consulting services >>> 42846865 (icq)And I run my own wisp! >>> 64.146.146.12 (net meeting) >>> www.odessaoffice.com/wireless >>> www.odessaoffice.com/marlon/cam >>> >>> >>> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] ot rj45 crimpers THREAD NOW CLOSED!
To All, I agree, this thread is starting to get old and is bordering on verbal attacks from several parties. Enough opinions have been given for people to make up their own mind. Just because one person likes or dislikes something doesn't mean that others will. Please refrain from pushing your opinions on others TOO FAR! Thanks to the gentleman who introduced this product to the list. I'm sure you did so because it works well for you. Rick Harnish President OnlyInternet Broadband & Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash Sent: Wednesday, February 22, 2006 3:23 PM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers Please don't continue on this topic. Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Rick Smith" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 12:18 PM Subject: Re: [WISPA] ot rj45 crimpers > this from a 19 yr old business wiz... :P > > Kurt Fankhauser wrote: > > If you can't "do the job right" with a non-EZ connector then mabey you > > should consider a different occupation. Out of thousands of crimps I've > > never once had a crimp fail and all my crimps are consistant with each > > other. A good solid RJ-45 crimp is very easy to make if you know what > > your doing. Cutting corners by using "cheater" type products is not the > > way you should be running a wisp. > > > > Kurt Fankhauser > > WAVELINC > > 114 S. Walnut St. > > Bucyrus, OH 44820 > > 419-562-6405 > > www.wavelinc.com > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Brian Rohrbacher > > Sent: Wednesday, February 22, 2006 10:55 AM > > To: WISPA General List > > Subject: Re: [WISPA] ot rj45 crimpers > > > > EZ is not for speed. It's for doing the job right. One service call > > because of your "fast" crimp and all the speed for years of "fast" > > crimping is lost. > > > > Kurt Fankhauser wrote: > > > >> I can crimp a regular rj45 connector faster than you can crimp your EZ > >> ones. If you know what you are doing you have no problem crimping one. > >> > >> Kurt Fankhauser > >> WAVELINC > >> 114 S. Walnut St. > >> Bucyrus, OH 44820 > >> 419-562-6405 > >> www.wavelinc.com > >> > >> > >> -Original Message- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >> Behalf Of Matt Liotta > >> Sent: Wednesday, February 22, 2006 9:26 AM > >> To: WISPA General List > >> Subject: Re: [WISPA] ot rj45 crimpers > >> > >> What is your time worth? > >> > >> -Matt > >> > >> Marlon K. Schafer (509) 982-2181 wrote: > >> > >> > >> > >>> That's it. Thanks! > >>> > >>> Do you really pay $.60 per connector??? Maybe it's not as nice of a > >>> tool as I thought > >>> > >>> laters, > >>> Marlon > >>> (509) 982-2181 Equipment sales > >>> (408) 907-6910 (Vonage)Consulting services > >>> 42846865 (icq)And I run my own > >>> > >>> > >> wisp! > >> > >> > >>> 64.146.146.12 (net meeting) > >>> www.odessaoffice.com/wireless > >>> www.odessaoffice.com/marlon/cam > >>> > >>> > >>> > >>> - Original Message - From: "Aubrey Wells" > >>> <[EMAIL PROTECTED]> > >>> To: "WISPA General List" > >>> Sent: Wednesday, February 22, 2006 9:14 AM > >>> Subject: Re: [WISPA] ot rj45 crimpers > >>> > >>> > >>> > >>> > >>>> http://www.happcontrols.com/electrical_supplies/92060900.htm > >>>> > >>>> --- > >>>> Aubrey Wells > >>>> One Ring Networks > >>>> [EMAIL PROTECTED] > >>>> o: (404) 601.1407 > >>>> f: (404) 601.1408 > >>>> c: (770) 356.9767 > >>>> > >>>> > >>>> > >>>> Marlon K. S
Re: [WISPA] ot rj45 crimpers
Please don't continue on this topic. Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Rick Smith" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 12:18 PM Subject: Re: [WISPA] ot rj45 crimpers > this from a 19 yr old business wiz... :P > > Kurt Fankhauser wrote: > > If you can't "do the job right" with a non-EZ connector then mabey you > > should consider a different occupation. Out of thousands of crimps I've > > never once had a crimp fail and all my crimps are consistant with each > > other. A good solid RJ-45 crimp is very easy to make if you know what > > your doing. Cutting corners by using "cheater" type products is not the > > way you should be running a wisp. > > > > Kurt Fankhauser > > WAVELINC > > 114 S. Walnut St. > > Bucyrus, OH 44820 > > 419-562-6405 > > www.wavelinc.com > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Brian Rohrbacher > > Sent: Wednesday, February 22, 2006 10:55 AM > > To: WISPA General List > > Subject: Re: [WISPA] ot rj45 crimpers > > > > EZ is not for speed. It's for doing the job right. One service call > > because of your "fast" crimp and all the speed for years of "fast" > > crimping is lost. > > > > Kurt Fankhauser wrote: > > > >> I can crimp a regular rj45 connector faster than you can crimp your EZ > >> ones. If you know what you are doing you have no problem crimping one. > >> > >> Kurt Fankhauser > >> WAVELINC > >> 114 S. Walnut St. > >> Bucyrus, OH 44820 > >> 419-562-6405 > >> www.wavelinc.com > >> > >> > >> -Original Message- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >> Behalf Of Matt Liotta > >> Sent: Wednesday, February 22, 2006 9:26 AM > >> To: WISPA General List > >> Subject: Re: [WISPA] ot rj45 crimpers > >> > >> What is your time worth? > >> > >> -Matt > >> > >> Marlon K. Schafer (509) 982-2181 wrote: > >> > >> > >> > >>> That's it. Thanks! > >>> > >>> Do you really pay $.60 per connector??? Maybe it's not as nice of a > >>> tool as I thought > >>> > >>> laters, > >>> Marlon > >>> (509) 982-2181 Equipment sales > >>> (408) 907-6910 (Vonage)Consulting services > >>> 42846865 (icq)And I run my own > >>> > >>> > >> wisp! > >> > >> > >>> 64.146.146.12 (net meeting) > >>> www.odessaoffice.com/wireless > >>> www.odessaoffice.com/marlon/cam > >>> > >>> > >>> > >>> - Original Message - From: "Aubrey Wells" > >>> <[EMAIL PROTECTED]> > >>> To: "WISPA General List" > >>> Sent: Wednesday, February 22, 2006 9:14 AM > >>> Subject: Re: [WISPA] ot rj45 crimpers > >>> > >>> > >>> > >>> > >>>> http://www.happcontrols.com/electrical_supplies/92060900.htm > >>>> > >>>> --- > >>>> Aubrey Wells > >>>> One Ring Networks > >>>> [EMAIL PROTECTED] > >>>> o: (404) 601.1407 > >>>> f: (404) 601.1408 > >>>> c: (770) 356.9767 > >>>> > >>>> > >>>> > >>>> Marlon K. Schafer (509) 982-2181 wrote: > >>>> > >>>> > >>>> > >>>>> Hi All, > >>>>> > >>>>> I'm looking for a crimper I saw someone talk about. It uses special > >>>>> > >>>>> > >> > >> > >>>>> rj45 connectors that allow the cable to go through the end. Then > >>>>> the crimper crimps and cuts to length at the same time. > >>>>> > >>>>> Anyone know what it's called and where to get the connectors and the > >>>>> > >>>>> > >> > >> > >>>>> crimper? > >>>>> > >>>>> thanks! > >>>>> > >>>>> Marlon > >>>>> (509) 982-2181 Equipment sales > >>>>> (408) 907-6910 (Vonage)Consulting services > >>>>> 42846865 (icq)And I run my own > >>>>> wisp! > >>>>> 64.146.146.12 (net meeting) > >>>>> www.odessaoffice.com/wireless > >>>>> www.odessaoffice.com/marlon/cam > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>> -- > >>>> WISPA Wireless List: wireless@wispa.org > >>>> > >>>> Subscribe/Unsubscribe: > >>>> http://lists.wispa.org/mailman/listinfo/wireless > >>>> > >>>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>>> > >>>> > >>>> > >> > >> > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
this from a 19 yr old business wiz... :P Kurt Fankhauser wrote: If you can't "do the job right" with a non-EZ connector then mabey you should consider a different occupation. Out of thousands of crimps I've never once had a crimp fail and all my crimps are consistant with each other. A good solid RJ-45 crimp is very easy to make if you know what your doing. Cutting corners by using "cheater" type products is not the way you should be running a wisp. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: Wednesday, February 22, 2006 10:55 AM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers EZ is not for speed. It's for doing the job right. One service call because of your "fast" crimp and all the speed for years of "fast" crimping is lost. Kurt Fankhauser wrote: I can crimp a regular rj45 connector faster than you can crimp your EZ ones. If you know what you are doing you have no problem crimping one. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Liotta Sent: Wednesday, February 22, 2006 9:26 AM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers What is your time worth? -Matt Marlon K. Schafer (509) 982-2181 wrote: That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] ot rj45 crimpers
If you can't "do the job right" with a non-EZ connector then mabey you should consider a different occupation. Out of thousands of crimps I've never once had a crimp fail and all my crimps are consistant with each other. A good solid RJ-45 crimp is very easy to make if you know what your doing. Cutting corners by using "cheater" type products is not the way you should be running a wisp. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: Wednesday, February 22, 2006 10:55 AM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers EZ is not for speed. It's for doing the job right. One service call because of your "fast" crimp and all the speed for years of "fast" crimping is lost. Kurt Fankhauser wrote: >I can crimp a regular rj45 connector faster than you can crimp your EZ >ones. If you know what you are doing you have no problem crimping one. > >Kurt Fankhauser >WAVELINC >114 S. Walnut St. >Bucyrus, OH 44820 >419-562-6405 >www.wavelinc.com > > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Matt Liotta >Sent: Wednesday, February 22, 2006 9:26 AM >To: WISPA General List >Subject: Re: [WISPA] ot rj45 crimpers > >What is your time worth? > >-Matt > >Marlon K. Schafer (509) 982-2181 wrote: > > > >>That's it. Thanks! >> >>Do you really pay $.60 per connector??? Maybe it's not as nice of a >>tool as I thought >> >>laters, >>Marlon >>(509) 982-2181 Equipment sales >>(408) 907-6910 (Vonage)Consulting services >>42846865 (icq)And I run my own >> >> >wisp! > > >>64.146.146.12 (net meeting) >>www.odessaoffice.com/wireless >>www.odessaoffice.com/marlon/cam >> >> >> >>- Original Message - From: "Aubrey Wells" >><[EMAIL PROTECTED]> >>To: "WISPA General List" >>Sent: Wednesday, February 22, 2006 9:14 AM >>Subject: Re: [WISPA] ot rj45 crimpers >> >> >> >> >>>http://www.happcontrols.com/electrical_supplies/92060900.htm >>> >>>--- >>>Aubrey Wells >>>One Ring Networks >>>[EMAIL PROTECTED] >>>o: (404) 601.1407 >>>f: (404) 601.1408 >>>c: (770) 356.9767 >>> >>> >>> >>>Marlon K. Schafer (509) 982-2181 wrote: >>> >>> >>> >>>>Hi All, >>>> >>>>I'm looking for a crimper I saw someone talk about. It uses special >>>> >>>> > > > >>>>rj45 connectors that allow the cable to go through the end. Then >>>>the crimper crimps and cuts to length at the same time. >>>> >>>>Anyone know what it's called and where to get the connectors and the >>>> >>>> > > > >>>>crimper? >>>> >>>>thanks! >>>> >>>>Marlon >>>>(509) 982-2181 Equipment sales >>>>(408) 907-6910 (Vonage)Consulting services >>>>42846865 (icq)And I run my own >>>>wisp! >>>>64.146.146.12 (net meeting) >>>>www.odessaoffice.com/wireless >>>>www.odessaoffice.com/marlon/cam >>>> >>>> >>>> >>>> >>>> >>>-- >>>WISPA Wireless List: wireless@wispa.org >>> >>>Subscribe/Unsubscribe: >>>http://lists.wispa.org/mailman/listinfo/wireless >>> >>>Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> > > > -- Brian Rohrbacher Reliable Internet, LLC www.reliableinter.net Cell 269-838-8338 "Caught up in the Air" 1 Thess. 4:17 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.12/266 - Release Date: 2/21/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] ot rj45 crimpers
Your better off on the ground than on a tower anyway Rick. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Smith Sent: Wednesday, February 22, 2006 10:55 AM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers I'll take that challenge :) I can crimp EZ's faster than you can pull the tension out of a guy wire on the tower someone's climbing! I never said EZ's were for people that didn't know what they were doing, I said they were for people that valued their time Kurt Fankhauser wrote: > I can crimp a regular rj45 connector faster than you can crimp your EZ > ones. If you know what you are doing you have no problem crimping one. > > Kurt Fankhauser > WAVELINC > 114 S. Walnut St. > Bucyrus, OH 44820 > 419-562-6405 > www.wavelinc.com > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Matt Liotta > Sent: Wednesday, February 22, 2006 9:26 AM > To: WISPA General List > Subject: Re: [WISPA] ot rj45 crimpers > > What is your time worth? > > -Matt > > Marlon K. Schafer (509) 982-2181 wrote: > >> That's it. Thanks! >> >> Do you really pay $.60 per connector??? Maybe it's not as nice of a >> tool as I thought >> >> laters, >> Marlon >> (509) 982-2181 Equipment sales >> (408) 907-6910 (Vonage)Consulting services >> 42846865 (icq)And I run my own > wisp! >> 64.146.146.12 (net meeting) >> www.odessaoffice.com/wireless >> www.odessaoffice.com/marlon/cam >> >> >> >> - Original Message - From: "Aubrey Wells" >> <[EMAIL PROTECTED]> >> To: "WISPA General List" >> Sent: Wednesday, February 22, 2006 9:14 AM >> Subject: Re: [WISPA] ot rj45 crimpers >> >> >>> http://www.happcontrols.com/electrical_supplies/92060900.htm >>> >>> --- >>> Aubrey Wells >>> One Ring Networks >>> [EMAIL PROTECTED] >>> o: (404) 601.1407 >>> f: (404) 601.1408 >>> c: (770) 356.9767 >>> >>> >>> >>> Marlon K. Schafer (509) 982-2181 wrote: >>> >>>> Hi All, >>>> >>>> I'm looking for a crimper I saw someone talk about. It uses special > >>>> rj45 connectors that allow the cable to go through the end. Then >>>> the crimper crimps and cuts to length at the same time. >>>> >>>> Anyone know what it's called and where to get the connectors and the > >>>> crimper? >>>> >>>> thanks! >>>> >>>> Marlon >>>> (509) 982-2181 Equipment sales >>>> (408) 907-6910 (Vonage)Consulting services >>>> 42846865 (icq)And I run my own >>>> wisp! >>>> 64.146.146.12 (net meeting) >>>> www.odessaoffice.com/wireless >>>> www.odessaoffice.com/marlon/cam >>>> >>>> >>>> >>> -- >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.12/266 - Release Date: 2/21/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
I have bought those before. They are kind of a cool novelty, but they don't add THAT much reliability/speed/ease of use/etc IMO. pd Marlon K. Schafer (509) 982-2181 wrote: That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
I'll take that challenge :) I can crimp EZ's faster than you can pull the tension out of a guy wire on the tower someone's climbing! I never said EZ's were for people that didn't know what they were doing, I said they were for people that valued their time Kurt Fankhauser wrote: I can crimp a regular rj45 connector faster than you can crimp your EZ ones. If you know what you are doing you have no problem crimping one. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Liotta Sent: Wednesday, February 22, 2006 9:26 AM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers What is your time worth? -Matt Marlon K. Schafer (509) 982-2181 wrote: That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
EZ is not for speed. It's for doing the job right. One service call because of your "fast" crimp and all the speed for years of "fast" crimping is lost. Kurt Fankhauser wrote: I can crimp a regular rj45 connector faster than you can crimp your EZ ones. If you know what you are doing you have no problem crimping one. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Liotta Sent: Wednesday, February 22, 2006 9:26 AM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers What is your time worth? -Matt Marlon K. Schafer (509) 982-2181 wrote: That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Brian Rohrbacher Reliable Internet, LLC www.reliableinter.net Cell 269-838-8338 "Caught up in the Air" 1 Thess. 4:17 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] ot rj45 crimpers
I can crimp a regular rj45 connector faster than you can crimp your EZ ones. If you know what you are doing you have no problem crimping one. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Liotta Sent: Wednesday, February 22, 2006 9:26 AM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers What is your time worth? -Matt Marlon K. Schafer (509) 982-2181 wrote: > That's it. Thanks! > > Do you really pay $.60 per connector??? Maybe it's not as nice of a > tool as I thought > > laters, > Marlon > (509) 982-2181 Equipment sales > (408) 907-6910 (Vonage)Consulting services > 42846865 (icq)And I run my own wisp! > 64.146.146.12 (net meeting) > www.odessaoffice.com/wireless > www.odessaoffice.com/marlon/cam > > > > - Original Message - From: "Aubrey Wells" > <[EMAIL PROTECTED]> > To: "WISPA General List" > Sent: Wednesday, February 22, 2006 9:14 AM > Subject: Re: [WISPA] ot rj45 crimpers > > >> http://www.happcontrols.com/electrical_supplies/92060900.htm >> >> --- >> Aubrey Wells >> One Ring Networks >> [EMAIL PROTECTED] >> o: (404) 601.1407 >> f: (404) 601.1408 >> c: (770) 356.9767 >> >> >> >> Marlon K. Schafer (509) 982-2181 wrote: >> >>> Hi All, >>> >>> I'm looking for a crimper I saw someone talk about. It uses special >>> rj45 connectors that allow the cable to go through the end. Then >>> the crimper crimps and cuts to length at the same time. >>> >>> Anyone know what it's called and where to get the connectors and the >>> crimper? >>> >>> thanks! >>> >>> Marlon >>> (509) 982-2181 Equipment sales >>> (408) 907-6910 (Vonage)Consulting services >>> 42846865 (icq)And I run my own >>> wisp! >>> 64.146.146.12 (net meeting) >>> www.odessaoffice.com/wireless >>> www.odessaoffice.com/marlon/cam >>> >>> >>> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.12/266 - Release Date: 2/21/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] ot rj45 crimpers
Got price down to $0.49 in bulk from: http://www.telephoneparts.com/product/EZRJ45?OVRAW=ez-rj45&OVKEY=ez%2520rj45 &OVMTC=standard#ez-rj45%20crimping%20tool Dave Keep looking -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Liotta Sent: Wednesday, February 22, 2006 12:26 PM To: WISPA General List Subject: Re: [WISPA] ot rj45 crimpers What is your time worth? -Matt Marlon K. Schafer (509) 982-2181 wrote: > That's it. Thanks! > > Do you really pay $.60 per connector??? Maybe it's not as nice of a > tool as I thought > > laters, > Marlon > (509) 982-2181 Equipment sales > (408) 907-6910 (Vonage)Consulting services > 42846865 (icq)And I run my own wisp! > 64.146.146.12 (net meeting) > www.odessaoffice.com/wireless > www.odessaoffice.com/marlon/cam > > > > - Original Message - From: "Aubrey Wells" > <[EMAIL PROTECTED]> > To: "WISPA General List" > Sent: Wednesday, February 22, 2006 9:14 AM > Subject: Re: [WISPA] ot rj45 crimpers > > >> http://www.happcontrols.com/electrical_supplies/92060900.htm >> >> --- >> Aubrey Wells >> One Ring Networks >> [EMAIL PROTECTED] >> o: (404) 601.1407 >> f: (404) 601.1408 >> c: (770) 356.9767 >> >> >> >> Marlon K. Schafer (509) 982-2181 wrote: >> >>> Hi All, >>> >>> I'm looking for a crimper I saw someone talk about. It uses special >>> rj45 connectors that allow the cable to go through the end. Then >>> the crimper crimps and cuts to length at the same time. >>> >>> Anyone know what it's called and where to get the connectors and the >>> crimper? >>> >>> thanks! >>> >>> Marlon >>> (509) 982-2181 Equipment sales >>> (408) 907-6910 (Vonage)Consulting services >>> 42846865 (icq)And I run my own >>> wisp! >>> 64.146.146.12 (net meeting) >>> www.odessaoffice.com/wireless >>> www.odessaoffice.com/marlon/cam >>> >>> >>> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
What is your time worth? -Matt Marlon K. Schafer (509) 982-2181 wrote: That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
they're EZ RJ45 crimpers / ends. and yeah, they're around 50 - 70 cents PER CONNECTOR. BUT I'll tell you whatsince I bought them, I've NEVER remade a cable, NOR have I had to use a cable tester... I won't go back now... actually feel helpless to borrow someone else's crimpers / ends Marlon K. Schafer (509) 982-2181 wrote: That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
That's it. Thanks! Do you really pay $.60 per connector??? Maybe it's not as nice of a tool as I thought laters, Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: "Aubrey Wells" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Wednesday, February 22, 2006 9:14 AM Subject: Re: [WISPA] ot rj45 crimpers http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] ot rj45 crimpers
http://www.happcontrols.com/electrical_supplies/92060900.htm --- Aubrey Wells One Ring Networks [EMAIL PROTECTED] o: (404) 601.1407 f: (404) 601.1408 c: (770) 356.9767 Marlon K. Schafer (509) 982-2181 wrote: Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] ot rj45 crimpers
Sounds like a nice tool Dan Metcalf Wireless Broadband Systems www.wbisp.com 781-846-6798 ext 6201 [EMAIL PROTECTED] support: [EMAIL PROTECTED] > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Marlon K. Schafer (509) 982-2181 > Sent: Wednesday, February 22, 2006 12:08 PM > To: wireless@wispa.org > Cc: isp-wireless@isp-wireless.com > Subject: [WISPA] ot rj45 crimpers > > Hi All, > > I'm looking for a crimper I saw someone talk about. It uses special rj45 > connectors that allow the cable to go through the end. Then the crimper > crimps and cuts to length at the same time. > > Anyone know what it's called and where to get the connectors and the > crimper? > > thanks! > > Marlon > (509) 982-2181 Equipment sales > (408) 907-6910 (Vonage)Consulting services > 42846865 (icq)And I run my own wisp! > 64.146.146.12 (net meeting) > www.odessaoffice.com/wireless > www.odessaoffice.com/marlon/cam > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 268.0.0/266 - Release Date: 02/21/2006 > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.0.0/266 - Release Date: 02/21/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] ot rj45 crimpers
Hi All, I'm looking for a crimper I saw someone talk about. It uses special rj45 connectors that allow the cable to go through the end. Then the crimper crimps and cuts to length at the same time. Anyone know what it's called and where to get the connectors and the crimper? thanks! Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp! 64.146.146.12 (net meeting) www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
