Hi All:
My first contest sorry for some simple questions. First, I figured how to
edit Contest Name, at Log Export just use ARRL-RTTY. I do have a specific
problem, have to set RTTY RU EXC to DX (Advance Settings).
After uploading my log, I am receiving warnings "copied exchange
(qthserial) is
Hi:
Seems I missed resetting title. Any idea how to change Contest name and
what is the correct contest name. Previous to the contest I reset log but
name of previous contest is still there.
BTW, great contest for FT8 and WSJTX. For those who were skeptical about
contesting compliance capabil
BTW, it was a pleasure to see Dr. Joe Taylor participating in the RTTY
RU. I managed to QSO with him on 3 different bands.
Next, I saw a situation where there were 2 FT8 stations operating
within the 170 Hz separation area of a single RTTY signal. Hopefully
they did not interfere with the RTTY sta
I have configured wsjtx to not allow a change in frequency during transmit.
During the RTTY RU contest, the receive frequency was locked as well as the
transmit frequency. It was a bit annoying that I could not move the receive
bracket during transmission. Sometimes the receive bracket would not up
I ran into the same issue during the RTTY RU contest. The work-around which
I used was to click on TX6 (CQ) and reenable the transmit in advance of
getting an answer back from the other station. If they were successful in
receiving my RR73, I aborted the CQ and chose my next QSO partner.
On Sun, J
Hi,
I have received a number of RRR messages at the end of a QSO in this
weekends RU.
I believe this is caused by users operating with tab 2 (iso tab 1) and
initiating the QSO.
If there is no reason for a RRR in ARRL RU contest mode , maybe disabling
tab 2 and 3 ?
Best regards and enj
Working as "search, not CQ" station there is one thing in RTTY RU
actions that I would like to change.
When I pick a CQ calling station, send "RST NR" and get "R RST NR" as
return my next TX will be "RR73".
But when that happens the radio button "Next" jumps to TX_6. Always, not
depending ha
Aaaahh!
Yes Bill! You are right.
I was looking at 00-30-00 times, but 15-45-15 makes also 30sek ;-(
I now carefully looked again ALL.TXT during those 2 days that I did use
MSK. All transmits seem to be 30sek periods.
How ever I can not understand that because I have predefined setup for
MSK
On 06/01/2019 10:22, Saku wrote:
For some reason (any possibility of bug?) v2.0/Linux/Fedora28 has
changed period length by itself from 15sec to 30sec and then back
again to 15sec.
No explanation for this.
Has anybody else ever seen something similar?
A cut of ALL.TXT is attached
Hi Saku &
Hi!
Few days ago I worked some qsos on 6m / MSK144.
Afterwards I was advised that I should not use 30sec periods. How ever I
did not touch period length at any time. It was 15sec when I started and
15sec when I ended working.
I am absolutely sure I did not touch it meanwhile. And if I had se
Tnx for your info Tom -although that frequency is more exactly 14130 kHz !!!
Do you know
- or does anyone know the 21 MHz FT8 frequency for ARRL RTTY RU ?
We all badly need a list of real FT8 RU calling frequencies for now and for
ever!
gl de ha6nn
Andras
On Sun, Jan 6, 2019 at 9:16 AM Tom Rambe
14030 is lively, mostly EU-EU stuff.
Tom OH6VDA@OH2K
> 6. jan. 2019 kl. 00:39 skrev :
>
> Sri those are this side of the pond.
>
>
> Sent from Xfinity Connect Application
>
>
> -Original Message-
>
> From: n...@comcast.net
> To: ha6nn.a...@gmail.com, wsjt-devel@lists.sourceforge.ne
HNY
I want to control with CAT different rigs,one receiver and one
transmitter with different COM ports under WSJT-X.
Any idea how I can do it?
Thank you
Alex SV8QG
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourcef
13 matches
Mail list logo
