Here is another one , but this time I only waited for two frames:
141930 Tx 1000 ~ CQ OE4KSF JN87
142000 Tx 1000 ~ CQ OE4KSF JN87
141945 -14 0.1 1000 ~ OE4KSF KM2G EL87
142000 Tx 1000 ~ KM2G OE4KSF -14
142030 Tx 1000 ~ KM2G OE4KSF -14
142045 -14 0.1 1001 ~ OE4KSF KM2G R-16
142100 Tx 1000 ~ KM2G O
It appears you may be dropping audio. Do you have other decodes at 140145,
140215 ?
#1 File/Delete all *wav.#2 Ensure you have an exclusion for
%LOCALAPPDATA%\WSJT-X in all your antivirus/malware software.#3 Save/All
Then watch the save directory and see if the WAV files aren't being saved.
Today it happened 4-5 times , but after I have sendt the reply 3-4-5 times
without a reply - I just hit the Tx6 for new CQ and his reply showing straight
away
Like the sone
140115 -24 0.2 1000 ~ OE4KSF WA1WXC FN31
140130 Tx 1000 ~ WA1WXC OE4KSF -24
140200 Tx 1000 ~ WA1WXC OE4KSF -24
140230 Tx
Hi, Steinar.
Yes, I suspect the AGC due to other very strong stations in the passband
could be limiting your ability to decode. I don't know if you use some
sort of DATA mode on your IC-7851 or not ... I think that usually
minimizes AGC action. If you are using SSB mode, AGC could certainly
Thank you Dave !
Well, . I live remote from any local noice - If I tune right outside the FT8
frequency I have nothing at all on my S meter .
I can have a SSB QSO with stations not even lifting my S meter at all. The
IC-7851 have a grate receiver
But what it might be - is that - like just now
Greetings Steinar.
It seems to me that both of your issues could be caused by a high local
noise level at your end. Let's look at the second issue first.
WSJT-X doesn't report the absolute signal strength ... it reports the
signal strength relative to a (if I remember correctly) 2.5 KHz
ba
On 8/14/19 2:23 PM, Steinar Fremme via wsjt-devel wrote:
Hi Steinar & all,
When a station is calling me - I do reply by ex. Foo bar -14 for example
5 times - and nothing happens - I just click CQ again and the first
message is a reply from the calling station by R-02
It seems to me that the de
Hello all!
Sorry if this issue has ben taken up before, but after looking into old
messages - I don’t find any
I have used WSJT-X on my Mac now for 6 months and logged more than 5000 FT8
entries in my logbook by it.
But there is one thing I’m not able to find out why happening .
When a statio
